Gasboy 2020 User Manual

harden. The pump can be dis mantled and soaked in diesel fuel or solvent.

the handle is closed tightly) with the base of the pump facing forward.

short of the ribs to a llow attachment of a ho se.

MODEL 2020 HAND PUMP FEATURES AND BENEFITS

High Capacity Delivers a pint plus (1/2 liter) per stroke.
Heavy Duty Construction The pump is constructed fr om Nylon 66 with a 20% gl ass fill. The glass fill

content is in the body of the cap piston rod, handle, and linkage.
Reliable The estimated life is 45,000 hours.
Versatile Designed to dispense hundreds of products, such as oils, antifreeze,

toluene, acetone, brake fluid, washer fluid, soaps, inks, etc.
Polypropylene Telescoping Suction Adjusts to various tank or drum sizes. Resistant to a wide range of

chemicals.
Check Valve Holds product at pump leve l e liminat ing the n eed to prim e the pump at eac h

use.
Dual Thread Fitting The pump may be mounte d on metal or plastic drum s, no special adapters

are required.
Non-Drip Nozzle Avoids mess. At the completion of pumping, the produc t in the nozzle will

return to the pump bod y. This product action creates a v acuum that pulls

the product from the end of nozzl e back down to t he pump. The n ozzle has

a “bayonet-style” attachm e nt wh ich kee ps the nozzle firmly attached.
Molded Grip Handle The ergonomic design allows for a firm and comfortable grip.
Easy Dismantling Although there are no replacement parts available, the pump may be

disassembled for cleaning . Some che micals or her bicides ca n build u p and

To dismantle the pump, p lace the pump between yo ur knees (making sure

Firmly grasp the body of the pump with both hands and turn counter-

clockwise. The pump can now be slipped apart in two pieces.
Viton Shaft and Top Casting Seals Viton seals provide a tight seal and resistance to a wide range of chemicals.
Ribbed Nozz le The nozzle may be cut j ust

The hose should be slipped over the ribs and clamped with a hose clamp.

SPECIAL NOTES:

Before using this product, ensure the nozzle is secured. Pound or tap the nozzle until fully seated, then rotate
clockwise ½ in ch. If th is is not done, the no zzle could fall off duri ng dispen sing . Al so, tap t he suction p ip e in as far
as possible and then turn ¼” of a turn. This will ensure a tight seal.

The 2020 is desi gned for d ispensing fue l from a stationary c ontainer. E xcessive movement of product in a mobile
tank could cause the suction pipe to eventually drop from the pump.

031973 03/07/03