Garmin 906-1090-05 User Manual

TR-1 Gold

Throttle Actuator

Installation Instructions

Suzuki 9.9 2005 and Newer

Suzuki 15 HP 2005 and Newer

1

906-1090-05

Tools Needed:

Vise Grips or Similar

Pliers

Ratchet
12mm socket
10mm socket

Extension

6mm internal Hex Bit (Allen)

Torque Wrench

Hacksaw
#1 Phillips screw driver
#3 Phillips screw driver

Locktite or Similar thread locker

Warning! Please Read. This application can be a difcult throttle installation, and requires

the use of a Torque Wrench in the installation. Since this engine is so tightly packaged, you may wish to

have your Suzuki dealer install this for you. Read through the instructions completely before proceeding.

If you have any questions, please don’t hesitate to call our technical service advisors. 1-800-588-7655

2

Suzuki Throttle Parts

Item # Part Number Description Qty.

1 120-1090-05 Throttle Actuator Assembly. Suzuki 1

3

Figure 1

Step One:

Disconnect motor from battery and or disconnect

safety lanyard, to prevent motor from starting

during throttle actuator installation

Step Two:

Remove Cover (cowling) from motor.

Figure 2

Figure 3

Step Three:

Remove the right side cover as described in
the Service Manual.

4