Garmin 3600a Quick Reference Guide

Creating a Direct To

Finding Nearest Aviation Points

Creating and Using a Flight Plan (Route)

iQue® 3600a

Quick Reference Guide

Use these instructions as a reference for important

iQue 3600a functions. For more detailed instructions,

please refer to the Que Applications Guide.

Direct To D Key

Press to create a Direct To quickly.

NEAREST Key

Press to ﬁnd places near you.

MENU Key

Press to open menus on a page.

ESCAPE Key

Press to exit menus or pages.

ENTER Key

Press to enter information.

Rocker

Press to highlight items on a

page and pan across the map.

Que Button

Press to open and cycle through Que applications.

Key

Press the Direct To D key to plot a direct course from your current location to

any airport, navaid, or other aviation point.

To go to an airport or navaid:

1. Press the Direct To D key on the aviation cradle. The Go To page appears.

2. To search by facility or by city, highlight the

By Identiﬁer pick-list. Press ENTER.

3. From the list that appears, highlight the search method you want to use with the

Rocker key

Choose a search method

from the pick-list.

and press ENTER to select.

4 Highlight the

Name ﬁeld and press ENTER.

5. To change the name, highlight the ﬁrst letter of the name and then press the Rocker key Up or Down to change the letter. Press the

Rocker

key Right to move to the next letter. When you

Enter the name with

the Rocker key.

are ﬁnished changing the name, press ENTER.

Go To is highlighted for you automatically. To

6. select the point that appears in the list, press

ENTER.

7. If there are several points in the list, press the

ROCKER key Up and highlight the point you

want to select. Then press the Right to highlight Go To and press The iQue 3600a creates a Direct To from your current location to the point you selected.

ROCKER key

ENTER.

Highlight your destination.

Press the NEAREST key to search for aviation points near your current location and navigate to them quickly. You can search for airports, navaids, and other aviation points nearby.

To ﬁnd and go to an airport near your

current location:

1. Press the NEAREST key on the aviation cradle. The Nearest Airport page appears.

2. Press the

Rocker key Down to scroll through

the list of airports near your current location. Highlight the point you want to go to.

3. Press the

Go To and press ENTER. The iQue 3600a

Rocker key Right to highlight

creates a Direct To from your current location to the airport you selected.

To ﬁnd and go to an aviation point near your current location:

1. Press the NEAREST key on the aviation cradle.

2. Continue pressing the

NEAREST key to search

for other types of aviation points (shown in the pick-list to the right).

3. Continue with steps two and three in the procedure above. To jump to the Nearest Airport page quickly, press and hold the

NEAREST key.

Press the NEAREST key repeatedly

to search for any type of aviation

point listed above.

Use this method to create and save a ﬂight plan, or route, that contains multiple points or stops. Keep in mind that you must add your starting airport to your route; it is not added automatically.

To create and use a ﬂight plan (route):

1. Press the Que button until you see the Active Route page.

2. Highlight

Add Wpt and press ENTER.

3. Search for a point to add to your ﬂight plan (see “Creating a Direct To” for more information).

4. Highlight a point; then press the

Rocker key

Right to highlight OK and press ENTER.

5. Repeat the previous three steps until you are ﬁnished adding points to your ﬂight plan.

Search for points to add to your

ﬂight plan and select

190-00426-02 Rev. B Printed in Taiwan

OK after each.

Add your starting airport to your

ﬂight plan; then use the

button to add additional points.

Add Wpt

Using Flight Plans

Selecting an Approach

Creating and Navigating to Waypoints

Viewing Details/Changing Modes

Once you create a ﬂight plan, it is saved automatically in the Saved Routes list. The iQue 3600a names the ﬂight plan using its starting and ending points (example: “KIXD-KSLN”). You can activate this ﬂight plan at any time from the QueRoutes page.

To activate a saved ﬂight plan:

1. Press ESCAPE until you see the Applications Launcher page. Continue to press ESCAPE until you see Que in the pick-list at the top right corner of the page.

2. Highlight

3. Highlight

4. Highlight the route you want to activate and press ENTER.

5. Highlight

Routes and press ENTER. Saved Routes and press ENTER.

Activate and press ENTER.

To stop navigating a ﬂight plan:

1. With an active ﬂight plan, press the Que button until you see the Active Route page.

2. Press the

3. Highlight

MENU key. Deactivate and press ENTER.

To select an approach for your destination airport:

1. While you have an active ﬂight plan (or Direct To), press the

Active Route page.

2. Press the MENU key.

3. Highlight

4. Highlight the Approaches pick-list and press

ENTER. A list of approaches appears.

5. Highlight an approach from the list and press

ENTER. Then highlight Select

and press ENTER.

6. Highlight to proceed directly to the ﬁnal approach ﬁx. Select Yes if you want to activate vectors.

NOTE:

Que button until you see the

Select Approach and press ENTER.

No and press ENTER if you want

If you select Yes to activate vectors, you will not see any active

navigation until you are on your ﬁnal approach.

To cancel an active approach:

1. Press the Que key until you see the Active Route page.

2. Highlight

Remove Appr and press ENTER.

Choose Select Approach from the menu.

Select an approach from the list.

To create a waypoint from the map:

1. From QueMap, press the Rocker key in any direction to activate Pan Mode. An arrow appears on the map.

2. Continue to press the arrow points to the place you want to save as a waypoint.

3. Press

4. Use the

5. Highlight

ENTER. An Information screen appears.

Highlight Create Waypoint and press ENTER.

Rocker and ENTER keys to name the

waypoint.

OK and press ENTER.

Rocker key until the

TIP: To create a waypoint inside airspace, use the stylus to tap the

Waypoint icon on the map page.

To go to a waypoint or recent point:

1. Press the Direct To D key.

2. Press the

3. Highlight

ENTER.

4. Highlight the point you want to go to. Then press the Rocker key Right to highlight Go To and press ENTER.

Rocker key Down to highlight the

Aviation pick-list. Press ENTER.

Recent or Waypoints and press

To view details for an airport:

1. Press the NEAREST key or Direct To D key on the aviation cradle.

2. Highlight the airport you want to view details for and press ENTER.

3. To view Comm, Runway, Approach, or VOR details, highlight that information type in the list and press ENTER.

Highlight the type of

information you want to view

in the list and press ENTER.

To change between Aviation and Automotive modes manually:

1. From QueMap, press the MENU key and select Switch Usage Mode.

OR:

1. From QueMap, press the select Preferences.

2. From the select Usage Mode.

3. Select Mode pick-list.

pick-list in the top left corner,

Automotive from the Navigation

MENU key and

TIP: If Auto Select is checked in Preferences, the iQue 3600a

automatically switches to Automotive mode when you insert the unit into an automotive cradle or Aviation mode in the Aviation cradle—no need to switch back and forth manually.