Garmin 3005C User Manual

Marking a Waypoint

Finding an Item

To mark your current location:

1. Press and hold ENTER/MARK until the Review Waypoint Page appears. The GPSMAP 3005C captures your current location, and then creates a default name and symbol for the new waypoint.

2. To accept the waypoint with the default information, press ENTER, or to change any waypoint information, highlight the appropriate eld and press ENTER.

To create a ne aypoint from a map feature:create a ne aypoint from a map feature:

1. Use the map pointer to highlight a map feature.

2. Press and release ENTER/MARK to capture the pointer location and open the Review Page.

3. Press the Create Wpt soft key to open the Review Waypoint Page.

4. To accept the waypoint with the default information, press ENTER, or to change any waypoint information,

highlight the appropriate eld and press ENTER.

Navigating to a Destination

Revie Waypoint Page

Revie Map Point

To nd an item from your current location:

1. From any page, press FIND to open the Find From Current Position Page.

2. Highlight a category, and press ENTER. For some categories, you might need to select multiple subcategories.

3. Highlight an item in the search results list, and press ENTER. The Review Page appears showing item information, map location, chart name, distance/bearing, and options for creating a waypoint or viewing the next item in the search results list.

Find From Current Position Page Revie Waypoint Page

Using the MOB (Man OverBoard) Feature

GPSMAP® 3005C

quick reference guide

To navigate to a destination

1. Press

2. Highlight Go To Point, Follo Route, Follo Track, or TracBack, and press ENTER.

3. Use the ROCKER to highlight a point, track, or route from the list, and press ENTER.

4. If you selected a point, press the Go To soft key. If you selected a route or saved track,

5. Follow the magenta route created on the Map Page. You can also use the Compass Page

NAV

to access the Navigation menu.

choose from the selections, and press ENTER.

to help you navigate.

Navigation Menu

Navigation Shon on the Map Page

The Man OverBoard function (MOB) simultaneously marks and sets a course back to the marked location for quick response to emergency situations.

To start the MOB function:

1. Press and hold NAV/MOB. A message appears asking you if you want to begin navigation to the MOB waypoint.

2. Press ENTER to begin navigating to the MOB location.

3. To stop navigation to the MOB location, press

NAV, highlight Stop Navigation, and press ENTER.

To stop navigation to the MOB location:

1. Press NAV/MOB.

2. Highlight Stop Navigation, and press ENTER.

Man OverBoard

Startup/Shutdon Sequence

Vieing Main Pages

Using the GPSMAP 3005C Keypad

To turn on the GPSMAP 3005C:

1. Press and hold the POWER key.

2. When the I Agree on-screen button is highlighted, press ENTER to acknowledge the warning and open the Map Page.

Warning Page

Map Page

To turn off the GPSMAP 3005C:

1. Press and hold the POWER key. If one MFD is connected, the unit shuts down. If multiple MFDs are connected, a prompt appears.

2. Select Yes to turn off the entire network, or select No to put the unit in sleep mode

3. Press ENTER.

The GPSMAP 3005C contains four main pages. Additional main pages appear as you add optional hardware to the Garmin Marine Network. Press PAGE to view each page.

Map Page

Compass Page

Map Split Page

Highay Page

POWER/BACKLIGHT—press and hold to turn the unit on or off.

Press and release to adjust the screen backlighting.

RANGE—press up to increase, or press down to decrease the range of the Map Page, Highway Page, and other range-related functions.

ROCKER—press up, down, right, or left to move through lists, highlight elds, select options and locations, enter data, or move the map pointer.

PAGE—press to cycle through the main pages in sequence and return from a sub page to a main page.

QUIT—press to return to a previous page, restore a data eld’s

previous value, and exit out of menus.

ENTER—press to select highlighted elds, conrm menu options and

enter data.

MARK—press and hold for two seconds to capture your current location and open the Review Waypoint Page.

ADJ—press to show available options and features for the current function.

MENU—press and hold to open the Main Menu.

Using the Main Menu

To change a setting using the Main Menu:

1. From any page, press and hold ADJ/MENU to open the Main Menu.

2. Use the ROCKER to select a tab, and then press right or left on the ROCKER to select a sub tab.

3. Highlight the eld you want to change, and press ENTER.

4. Make any changes, and press ENTER.

5. Press QUIT to return to the main page.

Main Menu

Adjusting the Backlight

To adjust the backlight level:

1. Press and release the POWER key.

2. Press up or down on the ROCKER to adjust the backlight level.

3. Press ENTER to quit.

Highest Selectable

Loest

NAV—press and release to access navigation options.

MOB (Man OverBoard)—press and hold to mark your current location and instantly set a return course.

DATA—press to toggle the display of a main page with or without

function windows and data elds.

CNFG—press and hold to open the Conguration window to customize

main pages.

FCTN—press to highlight the next available Function window on the split screen.

FIND—press to initiate the Find option, so you can search for user points, map items, and any optional data card information.