Garland M46S, M46T General Manual

Master Series Heavy Duty Even Heat Hot Top Range
Models:
M46R M46S M46T
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
Master Series Heavy Duty Even Heat Hot Top Range
Two Section Even Heat
Hot Top Range
Model M46R
Standard Features:
• Stainless steel front, black powder coat epoxy sides.
• 6" (152mm) chrome steel adj. legs
• 7-1/2" (191mm) stainless steel front rail
• Two extra heavy even heat cast iron hot top sections with 3 "H" burners; 90,000 BTU (26.4 kW) total
• Separate Hi-Lo control valves for each "H" burner
• Heavy gauge aluminized steel radiation baffle system
• Stainless steel burner box bottom
• Storage base interior of aluminized steel
• Piezo spark ignition for oven
• 40,000 BTU (11.72 kW) natural gas, 35,000 BTU (10.25kW) propane gas cast iron oven burner
Optional Features:
Stainless steel side(s) or main back Stainless steel oven interior Stainless steel common front rail
up to 68" (1728mm) wide (2 or more units in a battery)
Convection oven base, add C to
Model No., e.g. M46RC
Additional oven rack Rear gas connection, 3/4" or 1" NPT Gas regulator 3/4" or 1-1/4" Gas shut off valve; 3/4", 1" or 1-1/4"
NPT
Gas flex hose & quick disconnect
(3/4", 1" or 1-1/4" NPT x 5') w/ restraining device, please specify
End caps and cover, (NC, specify) Swivel casters (4) w/front brakes Polyurethane non-marking swivel
casters (4) w/front brakes
6" (152mm) stainless steel adj. legs Dais base (not for use with “RC”
oven)
Storage base shelf of aluminized or
stainless steel
Stainless steel tubular high shelf,
single or double deck
Stainless steel backguard: 10"
(354mm), 17" (432mm) or 33" (838mm)
230 volt, 50 cycle components,
RC motor (export)
Celsius dial for oven thermostat (NC)
Specifications:
Heavy duty gas range with oven, Model M46R. Two (2) 17" (432mm) even heat hot tops, rated a total 90,000 BTU (26.37 kW) total. 34" (864mm) wide x 38" (965mm) deep, including 7-1/2" (191mm) deep stainless steel front rail. Porcelain enamel oven interior with 40,000 BTU (11.72 kW) cast iron oven burner. Stainless steel front with black. Powder coat epoxy sides. 130,000 BTU (38.09 kW) total. Natural or propane gas. Also available with storage base w/ doors, suffix S, and modular top, suffix T.
Garland Commercial Ranges Ltd 1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA Phone: 905-624-0260 Fax: 905-624-5669
NOTE: Ranges suppled with casters must be installed with an approved restraining device.
Master Series Heavy Duty Even Heat Hot Top Range
Product
Width:
In(mm)
Depth: In(mm)
Height: In(mm)
(w/ NSF Legs)
Height: In(mm)
(w/o NSF Legs)
Oven/Storage Base Interior: in(mm)
Width Depth Height
M46R 34(864) 38(965) 36-3/8(924) 30-3/8(772) 26-1/4(667) 29(737)** 13-1/2(343) M46S 34(864) 38(965) 36-3/8(924) 36-3/8(924) 26(665) 30-1/2(773) 20-1/2(519) M46T 34(864) 38(965) 36-3/8(924) w/stand 9-1/2 (241) w/o stand* N/A N/A N/A
*Modular top has 1-1/2" seating anges. **RC oven is 25" (635mm) deep.
INPUT-BUT/hr (Natural Gas) M46R & M46RC M46S& M46T
Top Section Oven*** TOTAL
90,000 (26.37kW) 40,000 (11.72kW)
130,000(38.37kW)
90,000 (26.37kW)
N/A
90,000 (26.37kW)
RC=Range w/Convection Oven R=Range w/Oven S=Range w/Storage Base T=Modular Top
*** Oven rated 35,000 BTU (10.25kW) for Propane Gas
INSTALLATION NOTES Shipping Wt: (Lb/Kg)²
Combustible Wall Clearances ¹ Entry Clearances Operating Pressure
Sides: 11" (279mm)
Back: 6" (152mm)
Crated: 39-1/4" (997mm)
Uncrated: 34-1/4" (870mm)
Natural: 6" WC (15mbar)
Propane: 10" WC (25mbar)
M46R 450/205
M46S 350/159 M46T 260/118
¹NOTE: Installation clearance reductions are applicable only where
local codes permit.
²Shipping Cubic Feet 50 for R & S Models, 20 for T models
Data applies only to North America Gas input ratings shown here are for installations up to 2,000 ft.
(610m) above sea level. Specify altitudes over 2,000 ft.
37-7/8"
[962mm]
3-1/2"
[89mm]
26-7/8"
[683mm]
Electrical characteristics each RC oven: 1/3 HP motor, 120 VAC, single phase, 3.4 amps, 6 ft. (1.8m) power cord with NEMA 5-15P plug pro­vided. 230 VAC export is direct connect, single phase, 50 Hz. Please specify gas type when ordering.
DAIS Mounting
(Not for convection base)
2-/12"
[64mm]
33-7/8"
[860mm]
RANGE
1-1/4" N.P.T.
[32mm]
GAS INLET
Vermin Proof
16-7/16"
[418mm]
31-1/2"
[800mm]
46-3/4"
[1187mm]
BACKGUARD
40-1/4"
[1022mm]
W/”LPBG"
BACKGUARD
W/”BG"
[1619mm] With "DD"
51-3/4"
[1314mm]
W/ "SD"
HI SHELF
63-3/4"
HI SHELF
12"
[305mm]
20-3/8"
[518mm]
30-3/8"
[772mm]
17"
[432mm]
[864mm]
34"
7-1/2"
[191mm]
[75mm] 5" MAX
[133mm]
3" MIN
6"
[152mm]
34"
[864mm]
Garland Commercial Ranges Ltd 1177 Kamato Road, Mississauga, Ontario L4W 1X4 CANADA Phone: 905-624-0260 Fax: 905-624-5669
14-1/4"
[362mm]
34"
[864mm]
1" [25mm]
W/OPTIONAL
RC MOTOR
Form# M46 (08/10/10)
Loading...