Garland M45S, M45T General Manual

Master Series Heavy Duty
Front-Fired Hot Top Range

Models:

 M45R  M45S  M45T

Item: ______________________________

Quantity: __________________________

Project: ____________________________

Approval: __________________________

Date: ______________________________

Master Series Heavy Duty Front-Fired Hot Top Range

Two Front-Fired

Hot Top Range

Model M45R

Standard Features:

• Stainless steel front; black powder
coat epoxy sides

• 6" (152mm) chrome steel adj. legs

• 7‑1/2" (191mm) stainless steel front
rail

• Two 17" (432mm) extra‑heavy cast
iron top sections, each with 3 indi‑
vidually controlled jet burners rated
45,000 BTU (13.16 kW) natural or
33,000 BTU (9.66 kW) propane total
each section

• Removable cast iron ring and lid

• Heavy gauge, aluminized steel
radiation baffle system

• 1‑piece Stainless Steel drip tray

• Piezo spark ignition for oven

• Fully porcelainized oven interior

• 40,000 BTU (11.72 kW) natural gas,
35,000 BTU (10.25 kW) propane
gas, cast iron oven burner

• Storage base interior of aluminized
steel w/shelf (suffix S)

• Modular top available (suffix T)

Optional Features:

 Stainless steel oven interior
 Stainless steel common front rail

up to 68" (1728mm) wide (two or
more units in a battery)

 Stainless steel left, right or both

sides or main back

 Convection oven base, add C to

Model No., e.g., M45RC

 Additional oven racks
 Rear gas connection, 3/4" or 1‑1/4"

NPT; exterior mount, left or right,
add 5‑1/4"(133mm) to range width

 Gas regulator 3/4" or 1‑1/4"
 Gas shut off valve; 3/4", 1" or 1‑1/4"

NPT

 Gas flex hose & quick disconnect

(3/4", 1" or 1‑1/4" NPT x 5') w/
restraining device, please specify

 End caps and cover, (NC, specify)
 4‑Swivel casters w/front brakes
 4‑Polyurethane non‑marking

swivel casters w/front brakes

 6" (152mm) stainless steel adj. legs
 Dais base (not for use with "RC"

oven)

 Storage base shelf of stainless steel
 Stainless steel tubular high shelf,

single or double deck

 Stainless steel backguard: 10"

(354mm), 17" (432mm) or 33"
(838mm)

 230 volt, 50 cycle components,

RC motor (export)

 Celsius dial for oven thermostat (NC)

Specifications:

Heavy‑duty gas range with oven, Model M45R. Two (2) 17"
(432mm) front fired spectro‑heat hot tops, total 90,000 BTU
(26.37 kW) natual gas. 34" (864mm) wide x 38" (965mm)
deep, including 7‑1/2" (191mm) deep stainless steel front
rail. Porcelain enamel oven with 40,000 BTU (11.72 kW),
natural gas, cast iron burner. Stainless steel front with black
powder coat epoxy sides. 130,000 BTU (38.09 kW) total.
Natural or propane gas available Also available with stor‑
age base w/ doors, suffix S, and modular top, suffix T.

Garland Commercial Ranges Ltd
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
Phone: [phone]
Fax: [phone]

NOTE: Ranges suppled with casters must be installed with
an approved restraining device.

Master Series Heavy Duty Front-Fired Hot Top Range

Product

Width:

In(mm)

Depth:
In(mm)

Height: In(mm)

(w/ NSF Legs)

Height: In(mm)

(w/o NSF Legs)

Oven/Storage Base Interior: in(mm)

Width Depth Height

M45R 34(864) 38(965) 36‑3/8(924) 30‑3/8(772) 26‑1/4(667) 29(737)** 13‑1/2(343)
M45S 34(864) 38(965) 36‑3/8(924) 36‑3/8(924) 26(665) 30‑1/2(773) 20‑1/2(519)
M45T 34(864) 38(965) 36‑3/8(924) w/stand 9‑1/2 (241) w/o stand* N/A N/A N/A

*Modular top has 1‑1/2” seating anges. **RC oven is 25”(635mm) deep.

INPUT-BTU/hr

Total Top Section
Oven
TOTAL

90,000 (26.37kW)
40,000 (11.72kW)

130,000(38,37kW)

M45R & M45RC M45S & M45T

Natural Propane Natural Propane

66,000 (19.33kW)
35,000 (10.25kW)

101,000 (29.58kW)

90,000 (26.37kW)

N/A

90,000(37.217kW)

66,000 (19.33kW)

66,000(19.33kW)

RC=Range w/Convection Oven R=Range w/Oven S=Range w/Storage Base T=Modular Top

INSTALLATION NOTES Shipping Wt: (Lb/Kg)²

Combustible Wall Clearances ¹ Entry Clearances Operating Pressure

Sides: 14" (356mm)

Back: 6" (152mm)

Crated: 39‑1/4" (997mm)

Uncrated: 34‑1/4" (870mm)

Natural: 6" WC (15mbar)

Propane: 10" WC (25mbar)

M45R 510/232
M45S 410/186
M45T 305/138

¹NOTE: Installation clearance reductions are applicable only where local

codes permit.

²Shipping Cubic Feet 50 for R & S Models, 20 for T models

Data applies only to North America
Gas input ratings shown here are for installations up to 2,000 ft. (610m)

above sea level. Specify altitudes over 2,000 ft.

37-7/8"

[962mm]

3-1/2"

[89mm]

26-7/8"

[683mm]

Electrical characteristics each RC oven: 1/3 HP motor, 120 VAC, single
phase, 3.4 amps, 6 ft. (1.8m) power cord with NEMA 5‑15P plug provided.
230 VAC export is direct connect, single phase, 50 Hz.
Please specify gas type when ordering.

DAIS Mounting

(Not for convection base)

2-/12"

[64mm]

1-1/4" N.P.T.

[32mm]

GAS INLET

33-7/8"

[860mm]

RANGE

3" MIN
[75mm]
5" MAX

[133mm]

Vermin
Proof

16-7/16"

[418mm]

31-1/2"

[800mm]

46-3/4"

[1187mm]

With "BG"

BACKGUARD

40-1/4"

[1022mm]

With "LPBG"

BACKGUARD

[1314mm]

With "SD"

HI SHELF

12"

[305mm]

20-3/8"

[518mm]

30-3/8"

[772mm]

17"

[432mm]

[864mm]

34"

7-1/2"

[191mm]

N/A

51-3/4"

63-3/4"
[1619mm]
With "DD"

HI SHELF

6"

[152mm]

34"

[864mm]

Garland Commercial Ranges Ltd
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
Phone: [phone]
Fax: [phone]

14-1/4"

[362mm]

34"

[864mm]

1" [25mm]

W/OPTIONAL

RC MOTOR

Form# M45 (08/10/10)