Master Series Heavy Duty
Front-Fired Hot Top Range
Models:
M45R M45S M45T
Item: ______________________________
Quantity: __________________________
Project: ____________________________
Approval: __________________________
Date: ______________________________
Master Series Heavy Duty Front-Fired Hot Top Range
Two Front-Fired
Hot Top Range
Model M45R
Standard Features:
• Stainless steel front and sides
• 6" (152mm) chrome steel adj. legs
• 7‑1/2" (191mm) stainless steel front
rail
• Two 17" (432mm) extra‑heavy cast
iron top sections, each with 3 indi‑
vidually controlled jet burners rated
45,000 BTU (13.16 kW) natural or
33,000 BTU (9.66 kW) propane total
each section
• Removable cast iron ring and lid
• Heavy gauge, aluminized steel
radiation baffle system
• 1‑piece Stainless Steel drip tray
• Piezo spark ignition for oven
• Fully porcelainized oven interior
• 40,000 BTU (11.72 kW) natural gas,
35,000 BTU (10.25 kW) propane
gas, cast iron oven burner
• Storage base interior of aluminized
steel w/shelf (suffix S)
• Modular top available (suffix T)
Optional Features:
Stainless steel oven interior
Stainless steel common front rail
up to 68" (1728mm) wide (two or
more units in a battery)
Stainless steel main back
Convection oven base, add C to
Model No., e.g., M45RC
Additional oven racks
Rear gas connection, 3/4" or 1‑1/4"
NPT; exterior mount, left or right,
add 5‑1/4"(133mm) to range width
Gas regulator 3/4" or 1‑1/4"
Gas shut off valve; 3/4", 1" or 1‑1/4"
NPT
Gas flex hose & quick disconnect
(3/4", 1" or 1‑1/4" NPT x 5') w/
restraining device, please specify
End caps and cover, (NC, specify)
4‑Swivel casters w/front brakes
4‑Polyurethane non‑marking
swivel casters w/front brakes
6" (152mm) stainless steel adj. legs
Dais base (not for use with "RC"
oven)
Storage base shelf of stainless steel
Stainless steel tubular high shelf,
single or double deck
Stainless steel backguard: 10"
(354mm), 17" (432mm) or 33"
(838mm)
230 volt, 50 cycle components,
RC motor (export)
Celsius dial for oven thermostat (NC)
Specifications:
Heavy‑duty gas range with oven, Model M45R. Two (2) 17"
(432mm) front fired spectro‑heat hot tops, total 90,000 BTU
(26.37 kW) natual gas. 34" (864mm) wide x 38" (965mm)
deep, including 7‑1/2" (191mm) deep stainless steel front
rail. Porcelain enamel oven with 40,000 BTU (11.72 kW),
natural gas, cast iron burner. Stainless steel front and sides.
130,000 BTU (38.09 kW) total. Natural or propane gas avail‑
able Also available with storage base w/ doors, suffix S, and
modular top, suffix T.
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
General Inquires 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
®
NOTE: Ranges suppled with casters must be installed with
an approved restraining device.
Master Series Heavy Duty Front-Fired Hot Top Range
Product
Width:
In(mm)
Depth:
In(mm)
Height: In(mm)
(w/ NSF Legs)
Height: In(mm)
(w/o NSF Legs)
Oven/Storage Base Interior: in(mm)
Width Depth Height
M45R 34(864) 38(965) 36‑3/8(924) 30‑3/8(772) 26‑1/4(667) 29(737)** 13‑1/2(343)
M45S 34(864) 38(965) 36‑3/8(924) 36‑3/8(924) 26(665) 30‑1/2(773) 20‑1/2(519)
M45T 34(864) 38(965) 36‑3/8(924) w/stand 9‑1/2 (241) w/o stand* N/A N/A N/A
*Modular top has 1‑1/2” seating anges. **RC oven is 25”(635mm) deep.
INPUT-BTU/hr
Total Top Section
Oven
TOTAL
90,000 (26.37kW)
40,000 (11.72kW)
130,000(38,37kW)
M45R & M45RC M45S & M45T
Natural Propane Natural Propane
66,000 (19.33kW)
35,000 (10.25kW)
101,000 (29.58kW)
90,000 (26.37kW)
N/A
90,000(37.217kW)
66,000 (19.33kW)
66,000(19.33kW)
RC=Range w/Convection Oven R=Range w/Oven S=Range w/Storage Base T=Modular Top
INSTALLATION NOTES Shipping Wt: (Lb/Kg)²
Combustible Wall Clearances ¹ Entry Clearances Operating Pressure
Sides: 14" (356mm)
Back: 6" (152mm)
Crated: 39‑1/4" (997mm)
Uncrated: 34‑1/4" (870mm)
Natural: 6" WC (15mbar)
Propane: 10" WC (25mbar)
M45R 510/232
M45S 410/186
M45T 305/138
¹NOTE: Installation clearance reductions are applicable only where local
codes permit.
²Shipping Cubic Feet 50 for R & S Models, 20 for T models
Data applies only to North America
Gas input ratings shown here are for installations up to 2,000 ft. (610m)
above sea level. Specify altitudes over 2,000 ft.
37-7/8"
[962mm]
3-1/2"
[89mm]
26-7/8"
[683mm]
Electrical characteristics each RC oven: 1/3 HP motor, 120 VAC, single
phase, 3.4 amps, 6 ft. (1.8m) power cord with NEMA 5‑15P plug provided.
230 VAC export is direct connect, single phase, 50 Hz.
Please specify gas type when ordering.
DAIS Mounting
(Not for convection base)
2-/12"
[64mm]
1-1/4" N.P.T.
[32mm]
GAS INLET
33-7/8"
[860mm]
RANGE
3" MIN
[75mm]
5" MAX
[133mm]
Vermin
Proof
16-7/16"
[418mm]
31-1/2"
[800mm]
46-3/4"
[1187mm]
With "BG"
BACKGUARD
40-1/4"
[1022mm]
With "LPBG"
BACKGUARD
[1314mm]
With "SD"
HI SHELF
12"
[305mm]
20-3/8"
[518mm]
30-3/8"
[772mm]
17"
[432mm]
[864mm]
34"
7-1/2"
[191mm]
N/A
51-3/4"
63-3/4"
[1619mm]
With "DD"
HI SHELF
6"
[152mm]
34"
[864mm]
Garland Commercial Ranges Ltd.
1177 Kamato Road,
Mississauga, Ontario
L4W 1X4 CANADA
14-1/4"
[362mm]
General Inquires 1-905-624-0260
USA Sales, Parts and Service 1-800-424-2411
Canadian Sales 1-888-442-7526
Canada or USA Parts/Service 1-800-427-6668
34"
[864mm]
1" [25mm]
W/OPTIONAL
RC MOTOR
Form# M45 (07/29/11)