GARDENA®
Art. 1805
GB Operating Instructions
Water Timer Electronic T 1030
SBruksanvisning
Bevattningstimer electronic T 1030
NL Gebruiksaanwijzing
Elektronische watertimer T 1030
DGebrauchsanweisung
Bewässerungsuhr electronic T 1030
FIN Käyttöohjeet
Elektroninen kasteluajastin T 1030
GARDENA |
G |
Water Timer Electronic T 1030 |
|
1. Notes on these Operating Instructions
Please read these operating instructions carefully and observe the notes given. Use these operating instructions to familiarise yourself with the water timer, the unit’s features and proper use as well as with the notes on safety.
For safety reasons, children and young people under 16 as well Aas anyone who is not familiar with these operating instructions may not use the water timer.
Keep these operating instructions in a safe place.
2. Proper Use
The GARDENA Water Timer Electronic T 1030 is suitable and determinated for private use in domestic and hobby gardens, exclusively for outdoor use, to control sprinklers and watering systems.
The water timer must not be used for industrial purposes or Ain conjunction with chemicals, foodstuffs, easily flammable and explosive materials.
Compliance with the operating instructions provided by the manufacturer is a prerequisite to ensure proper use of the GARDENA Water Timer Electronic.
The operating instructions also contain operating, servicing and maintenance conditions.
3. Technical Data
Operating pressure: |
1-12 bar |
Flow medium: |
clean fresh water |
Max. water temperature: |
40 °C |
Watering cycles per day |
|
(programmable): |
up to 3 |
Watering cycles per week: |
every day, every 2nd, 3rd or 7th day |
Watering cycles per program: |
1, 2, 3, 4, 5, 6, 8, 10, 15, 30, 60, |
|
90 or 120 min. |
Battery: |
1 × 9 V alkali-manganese (alkaline) |
|
type IEC 6LR61 |
Service life of the battery: |
approx. 1 year |
4. How the Water Timer Electronic Works
This GARDENA Water Timer Electronic T 1030 allows you to set different watering times and cycles for different watering times independent of whether you are using a sprinkler, a sprinkler system installation or a driphead watering system to water your garden.
Your Water Timer Electronic will water your garden completely automatically according to the program you choose. You can set the timer to water your garden early in the morning or late at night when water evaporates the least, or while you are on holiday.
4 |
5 |
5. Summary of Operating Instructions
1.Insert the battery.
Only use a 9 V alkali-manganese (alkaline) battery type IEC 6LR61. Check the polarity (+/– markings).
2.Setting the watering frequency
The following watering cycles can be selected using the Frequency control knob:
Setting |
Watering Cycle |
|
|
7th |
every 7 days |
3rd |
every 3 days |
2nd |
every 2 days |
24 h |
daily |
|
|
12 h |
twice a day |
|
|
8 h |
three times a day |
|
|
3.Setting the watering time / starting time (Run Time)
You can select the watering time using the Run Time control knob 3. You can select 13 positions between 1 and 120 minutes.
The times you enter are accepted 5 seconds after you have finished entering the data. The time this happens is the future watering starting time.
4.Delaying the starting time (Start Time)
The Start Time can be delayed up to 5 seconds after you have selected the Run Time. Each time you press the Start Time key 4, the Start Time is delayed by 1 hour from the original time set.
5.Manual On/Off operation (Man)
Turning the Run Time knob 3 to On opens the valve, turning it back to Off or to the required watering time, closes the valve. The starting time you originally programmed remains unchanged.
6.Reset
Turning the Run Time knob 3 to Reset deletes the starting time and watering time. The watering valve is not opened.
7.Bad weather operation (Man/Off)
If Run Time 3 is set to Off, your garden will not be watered automatically. e.g. during a rainy period. If, at the end of the rainy period, you turn the knob back to the required watering time, the starting time you selected remains unchanged.
6. Operating Parts
1 Complete housing |
Accompanying accessories |
|
2 Watering cycle control knob |
B G ¾ adaptor for sleeve nut |
|
(Frequency) |
|
C GARDENA threaded tap |
3 Watering time control knob |
connector |
|
(Run Time) |
|
|
4 Key for starting time (Start Time) |
Option |
|
5 Battery compartment |
D Anti-theft protection |
|
6 Control unit connection plug |
|
|
7 Release button for control unit |
|
|
8 Connection socket for Soil |
|
|
Moisture Sensor / Rain Sensor |
|
|
9 Control knob markings |
|
|
0 Control unit |
|
|
A Sleeve nut |
|
|
7. Features of the Water Timer |
||
7.1 Operating elements (Fig. C) |
|
|
Frequency |
To set the watering cycle. |
|
Run Time |
To set the watering time (Run Time), watering |
|
|
starting time and to open and close the water flow |
|
|
by hand. |
|
Start Time ▲ |
The starting time is delayed by an hour from the time |
|
|
you set the timer, each time you press the key. |
|
7.2 More Functions
Sleeve nut with adaptor
To connect the Water Timer to the tap.
GARDENA threaded tap connector
Fits GARDENA System hoses.
Connection |
For GARDENA Soil Moisture Sensor (Art. No. 1187) |
|
and GARDENA Rain Sensor (Art. No. 1189). |
Battery compartment
To insert a 9 V battery.
6 |
7 |
Loading...