Gardena 9852-33 Operator's Manual
Set AccuCut Li
Art. 9852-33
D Betriebsanleitung
Grasschere / Strauchschere
GB Operators Manual
Grass Shear / Shrub Shear
F Mode d’emploi
Cisaille à gazon / Taille-buisson
NL Gebruiksaanwijzing
Grasschaar / Buxusschaar
S Bruksanvisning
Grässax / Busksax
DK Brugsanvisning
Græssaks / Busksaks
FI Käyttöohje
Ruohosakset / Pensasleikkuri
N Bruksanvisning
Gressaks / Busktrimmer
I Istruzioni per l’uso
Cesoie per erba /
Cesoie per arbusti
E Instrucciones de empleo
Tijeras cortacésped /
Tijeras recortasetos
P Manual de instruções
Tesoura para relva /
Tesoura para arbustos
PL Instrukcja obsługi
Nożyce do trawy /
Nożyce do krzewów
H Használati utasítás
Fűnyíró olló / Bokornyíró olló
CZ Návod k obsluze
Nůžky na trávu / Nůžky na keře
SK Návod na obsluhu
Nožnice na trávu / Nožnice na kroviny
GR Οδηγίες χρήσης
Ψαλίδι χλόης / Ψαλίδι θάμνων
RUS Инструкция по эксплуатации
Ножницы для газонов /
Ножницы для кустарников
SLO Navodilo za uporabo
Škarje za travo / Škarje za grmovje
HR Upute za uporabu
Škare za travu / Škare za grmlje
SRB Uputstvo za rad
BIH Makaze za travu / Makaze za žbunje
UA Інструкція з експлуатації
Ножиці газонні акумуляторні /
Акумуляторний кущоріз
RO Instrucţiuni de utilizare
Foarfecă pentru gazon /
Foarfecă pentru arbuşti
TR Kullanma Kılavuzu
Çim makası / Çalı makası
BG Инструкция за експлоатация
Ножица за трева /
Ножица за храсти
AL Manual përdorimi
Prerëse bari / Prerëse ligustrash
EST Kasutusjuhend
Murukäärid / Põõsakäärid
LT Eksploatavimo instrukcija
Žolės žirklės / Krūmų žirklės
LV Lietošanas instrukcija
Zāles šķēres / Dzīvžogu šķēres
LV LT EST AL BG TR RO UA
SRB
BIH
HR SLO
RUS
GR SK CZ H PL P E I N FI DK S NL F GB D
1. SAFETY
If not used properly this product can be dangerous. The warnings and safety instructions
must be followed to ensure reasonable safety
and efficiency in using this product.
The operator is responsible for following the
warnings and instructions in this manual and
on the product. Never use the product unless
the guards provided by the manufacturer are
in the correct position.
Symbols on the product:
Read operator’s manual.
DANGER!
Cutting tool continues to run
after switching off!
DANGER!
Keep bystanders away.
Do not expose to rain.
General safety warnings for the Grass Shear:
WARNING! Read all safety warnings
and all instructions.
Failure to follow the warnings and
instructions may result in electric shock,
fire and / or serious injury.
Save all warnings and instructions for future
reference.
Safe operation practices
1) Training
a) Read the instructions carefully. Be familiar with
the controls and the correct use of the machine.
b) Never allow children or people unfamiliar with
these instructions to use the machine. Local
regulations can restrict the age of the operator.
c) Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
2) Preparation
a) Before use, check the supply and extension
cord for signs of damage or aging. If the cord
becomes damaged during use, disconnect the
cord from the supply immediately.
GARDENA Set AccuCut Li
Grass Shear / Shrub Shear
Table of Contents:
1. SAFETY .............................13
2. INSTALLATION ........................17
3. OPERATION ..........................18
4. MAINTENANCE .......................19
5. STORAGE ...........................19
6. TROUBLESHOOTING ..................20
7. TECHNICAL DATA .....................21
8. SERVICE / WARRANTY ..................22
The initial language of these instructions is
English. Other language versions are translations of the initial instructions.
This product is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the product
by a person responsible for their safety. Children
should be supervised to ensure that they do not
play with the product.
Intended use for the Grass Shear:
The GARDENA Grass Shears are suitable for
cutting lawn edges, smaller grass areas and for
precise shaping of shrubs, in particular boxwood,
for the private home or hobby garden.
WARNING! Risk of injury! The product must
not be used for chopping up material for composting purposes.
Intended use for the Shrub Shear:
The GARDENA Shrub Shear is intended for cutting
individual bushes, shrubs and climbing plants in
private domestic and hobby gardens.
WARNING! Risk of injury! The product must
not be used for cutting lawns / lawn edges or
for chopping up material for composting purposes.
13
GB
DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use
the machine if the cord is damaged or worn.
b) Before use, always visually inspect the machine
for damaged, missing or misplaced guards or
shields.
c) Never operate the machine while people,
especially children, or pets are nearby.
3) Operation
a) Keep supply and extension cords away from
cutting means.
b) Wear eye protection and stout shoes at all
times while operating the machine.
c) Avoid using the machine in bad weather
conditions especially when there is a risk of
lightning.
d) Use the machine only in daylight or good
artificial light.
e) Never operate the machine with damaged
guards or shields or without guards or shields
in place.
f) Switch on the motor only when the hands and
feet are away from the cutting means.
g) Always disconnect the machine from the power
supply (i. e. remove the plug from the mains
remove the disabling device or removable
battery)
– whenever the machine is left unattended,
– before clearing a blockage,
– before checking, cleaning or working on the
machine,
– after striking a foreign object,
– whenever the machine starts vibrating
abnormally.
h) Take care against injury to feet and hands from
the cutting means.
i) Always ensure that the ventilation openings are
kept clear of debris.
4) Maintenance and storage
a) Disconnect the machine from the power supply
(i.e. remove the plug from the mains remove the
disabling device or removable battery) before
carrying out maintenance or cleaning work.
b) Use only the manufacturer’s recommended
replacement parts and accessories.
c) Inspect and maintain the machine regularly.
Have the machine repaired only by an authorized repairer.
d) When not in use, store the machine out
of the reach of children.
General safety warnings for the Shrub Shear:
WARNING! Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and / or serious injury.
Save all warnings and instructions for future
reference. The term “power tool” in the warnings
refers to your mains operated (corded) power tool
or battery operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adaptor plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp loca-
tion is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating
14
GB
a power tool. Do not use a power tool
while you are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting to power source and / or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tools may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better con-
trol of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better
and safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off.
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c) Disconnect the plug from the power
source and / or the battery pack from the
power tool before making any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool’s operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer. A charger that is suit-
able for one type of battery pack may create a
risk of fire when used with another battery pack.
b) Use power tools only with specifically des-
ignated battery packs. Use of any other bat-
tery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a quali-
fied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Hedge trimmer safety warnings:
• Keep all parts of the body away from the
cutter blade. Do not remove cut material or
hold mate rial to be cut when blades are
moving. Make sure the switch is off when
clearing jammed material.
15
GB
A moment of inattention while operating the
hedge trimmer may result in serious personal
injury.
• Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge trimmer
always fit the cutting device cover.
Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter
blades.
• Hold the power tool by insulated gripping
sur faces only, because the cutter blade
may contact hidden wiring.
Cutter blades contacting a “live” wire may make
exposed metal parts of the power tool “live”
and could give the operator an electric shock.
Additional safety warnings
Warning! Keep toddlers away when you assemble
the product. Small parts can be easily swallowed.
There is also a risk that the polybag can suffocate
toddlers.
Work area safety
Only use the product in the manner and for the
functions described in these instructions.
The operator or user is responsible for accidents
or hazards occurring to other people or their
property.
Do not use the product when a thunderstorm is
approaching.
Electrical safety
Before use, examine cable for damage, replace it
if there are signs of damage or ageing.
Do not use the product if the electric cables are
damaged or worn.
Immediately disconnect from the mains electricity
supply if the cable is cut, or the insulation is damaged. Do not touch the electric cable until the
electrical supply has been disconnected.
Always disconnect the mains cable before
disconnecting any plug, cable connector or
extension cable.
Always wind cable carefully, avoiding kinking.
Use only on AC mains supply voltage shown on
the product rating label.
Do not connect an earth to any part of the
product.
Warning! This product makes an electromagnetic
field while it operates. This field may under some
conditions interfere with active or passive medical
implants. To decrease the risk of conditions that
can possibly injure or kill, we recommend persons
with medical implants to speak with their physician
and the medical implant manufacturer before operating.
Cables
Use only permitted extension cables as per
HD516.
v Ask your electrical specialist.
Personal safety
Always wear suitable clothing, protective gloves,
and stout shoes.
Thoroughly inspect the area where the product is
to be used and remove all wires and other foreign
objects.
Before using the product and after any impact,
check for signs of wear or damage and repair as
necessary.
If the product can no longer switched off in the
event of a defect, place the product on a solid
surface and monitor until the battery is empty.
Send the defective product to the GARDENA
Service Centre.
Never attempt to use an incomplete product or
one with an unauthorized modification.
Product use and care
Know how to stop the product quickly in an
emergency.
Do not hold the product by the guard.
Do not use the product if the protection equip-
ments (protective cover, quick blade-stop) are
damaged.
Do not use ladders whilst operating the product.
Remove the battery:
– before leaving the product unattended for any
period;
– before clearing a blockage;
– before checking, cleaning or working on the
product;
– if you hit an object. Do not use your product
until you are sure that the entire product is in
a safe operating condition;
– if the product starts to vibrate abnormally.
Check immediately. Excessive vibration can
cause injury.
– before passing to another person.
Only use the product between 0 – 40 °C.
16
GB
Loading...