Ganz DR-16F44-AT Installation Manual
1
２
CONTENT
OVERVIEW
3 Safety Instruction
4 Caution
4 Key Features
5 What’s included?
6 Front Panel
7 Rear Panel
8 Remote Control At a Glance
INSTALLATION
10 HDD Installation/Replacement
12 Basic Layout
13 Connecting to an external devices
３
OVERVIEW
Safety Instruction
This product was tested with a UPS to satisfy EN 61000-4-11 test conditions (voltage dips and short
interruptions test) under the EN 50130-4: 2011 standard. For your safety, we provide a few
instructions about installation, manipulation, cleaning, assembly/disassembly of the product as
below. So please read carefully and comply with the instructions.
Before installation
Comply with the following instructions to prevent a fire, explosion, system failure or electric shock.
Remove the power supply module before proceeding.
Check the input voltage (AC100V–AC240V) to the power supply module before connecting it.
Keep the product away from humidity.
Ensure that all devices connected to the product should be properly earth-grounded.
In operation mode
Comply with the following instructions to prevent a fire, explosion, system failure or electric shock.
If you need to open the cover, consult with a service person who could help you do what you
want to do.
Do not connect multiple devices to a single power socket.
Keep the product away from dust or too much combustible substances (ex: propane gas).
Do not touch it with wet hand.
Do not insert a conductor in the vent of the ventilation system.
Do not apply excessive force to unplug the power cord.
Disassembly & Cleaning
When cleaning on the surface, use a dry cloth.
Do not wipe the product using water, paint thinner or organic solvents.
Do never dismantle, repair or modify the product by your own.
During installation
To prevent an accident or physical injury and to operate DVR properly, please comply with the
followings
Secure at least 18 centimeter of distance between cooling fan and wall for a proper ventilation.
Install the product on a flat surface.
Keep it away from direct sunlight or excessive temperature.
While in use
Do not apply force to or shake it while using it.
Do not move, throw away or put excessive force to it.
Using any unrecommended HDD may cause a system failure. Check the compatibility list and
use only compatible HDDs.
{A system failure or data loss caused by an incompatible HDD will void your warranty.}
４
OVERVIEW
CAUTION
Replaceable batteries
Risk of Explosion if Battery is replaced by an Incorrect type. Dispose of Used Batteries According to
the instructions.
Warning to service personnel
Double pole / neutral fusing.
Ethernet Instruction
This equipment is indoor use and all the communication wiring are limited to inside of the building or
similar word.
Key Features
This product is capable of receiving inputs from up to 16 channels of 1080P camera inputs of video
and audio recording onto a hard disk drive in real-time, as well as providing monitoring, playback
and backup footage in excellent quality of 1080P resolution.
It also provides transferring video and audio data to the networked external devices, which allows
remote monitoring environment for computers and mobile devices including cell phones.
Up to 16 channels of 1080P camera videos can be displayed at 480 / 400 fps in real-time.
Up to 16 channels of 1080P camera videos can be saved at maximum 480 / 400 fps.
Simultaneously recording and playback of maximum 16 channels (at 480/400 fps @ 2CIF).
Supports H.264 High Profile CODEC.
Auto alarm feature with self-diagnostics on the system (HDD S.M.A.R.T, network error, etc.)
Supports dual streaming for remote access service.
Supports HDD extension (eSTATA).
Various search methods (time, event, bookmark, thumbnail and text-in).
Mass storage backup via USB port or FTP server.
Supports remote access and search using web browser.
Dedicated smart phone applications that can be used with iPhone and iPad or on Android OS.
1080p Full HD GUI
Division
Display
Stream
Maximum performance (fps)
2CIF
4CIF
720P
1080P
1
1st stream
30
30
30
30
4
120
120
120
120
8
2nd stream
240
--
--
--
16
480
--
--
--
５
OVERVIEW
What's included?
Mouse Remote Control Power Cable
& Batteries (AAA x2)
DC12V Adaptor Adaptor cable retainer clip Screws fro HDDs
Terminal Block (9Px2) Terminal Block (10Px4) Quick Guide
User manual CD
６
OVERVIEW
Front Panel
Name
Description
IR Remote
Control
Receiver
Receive the signal from the remote control
USB
Used for connecting USB storage or mouse.
Status LED
Show the status of power, recording or network connection
together with the corresponding alarm.
HDD 1~5 /
eSATA
HDD1 HDD2 HDD3 HDD4 HDD5 eSATA
Indicates connection status of internal/external storage
devices.
Loading...