Gai-tronics 7325-106 User Manual

Pub. DS7325-106
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
Multi-Party Amplifier Enclosure
General Information
This data sheet applies to the Model 7325-106 Multi-Party Amplifier Enclosure, which is a component of the 700 Series Page/Party< system. This enclosure is configured for multi-party systems and can accommodate conversations on up to five party lines simultaneously.
The Model 7325-106 is constructed of cast aluminum and is extremely weatherproof and corrosion­resistant. It is equipped with terminal strips for connecting system cable, and is supplied with pre-drilled cable openings and dual 1.25-inch conduit hubs located on both the top and bottom. The Page/Party Series amplifiers mate directly with this enclosure. For continued IP 66 protection, torque setting for securing the amplifier to the enclosure should be 10 to 12 in-lbs. or 1.13 to 1.36 n-m.
®
Figure 1. Model 7325-106 Enclosure Mounting Details
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
V
ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Pub. DS7325-106
Model 7325-106 Multi-Party Amplifier Enclosure Page:
2 of 2
Specifications
Construction/finish.......................................................... Sand-cast A319 aluminum alloy, cam-style latch,
hinged door with gasket; gray enamel paint
Mounting................................................ Wall, column, or pole (mounting kit required for pole mounting),
four 0.44-inch (11.2 mm) mounting holes
Connections ............................................................................... Internal screw-type barrier terminal blocks
External controls ..........................................................................................................Rotary selector switch
Dimensions ................................................... 14.50 H × 10.38 W × 9.6 D inches (368.3 × 263.6 ×244 mm)
Temperature range (operating and storage) ........................................ 22º F to +158º F (30º C to +70º C)
Shipping weight .................................................................................................................. 20.4 lbs. (9.3 kg)
Approvals
Model 7325-106 Enclosure.................................................................................................II 3G EEx nA IIC
Temp -30 to 70ºC Location Zone 2 IP 66 when installed with a Model 701-305, 751-005, 701-905, or 751-905 Amplifier
NRTL listed ..............................Suitable for use in hazardous locations Class I, Div. 2, Groups A, B, C, D;
Class II, Div. 2, Groups F, G; Class III, Div. 2 when used with listed 701-305, 701-905, 751-005 or 751-905 Amplifier Enclosure environmental rating: Type 4X and 13
CE Mark
Certificate No. DEMKO 05 ATEX 0502028X Notified Body Id No. 0539 UL International DEMKO A/S Lyskear 8 DK-2730 Herlev Denmark
f:\standard ioms - current release\data sheets\ds7325-106.doc
11/10
Loading...