Gai-tronics 7165-102 DATASHEET

Pub. DS7165-102

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

Model 7165-102

Multi-Party Flush-Mount Subset

General Information

This data sheet applies to the Model 7165-102 Multi-Party Flush-Mount Subset, which is intended for use
in GAI-Tronics Page/Party
handset cradle, and a five-party rotary selector switch.

The Model 7165-102 Multi-Party Flush-Mount Subset must be installed with a certified remote subset
amplifier and a certified Model 7245 Enclosure for proper operation. The subset must be mounted in an
indoor location within eight feet of the enclosure.

Specifications

Construction/finish..................................................... 16-gauge cold-rolled steel/gray polyurethane enamel

Handset microphone ............................................................................. Dynamic, noise-canceling, 10 ohms

Receiver ........................................................................ Dynamic, 150 ohms, hearing aid compatible

Cable .......................................................................................................... Retractile, 6-foot extended

Material ............................................................................................................................... Gray ABS

External controls ........................................................... Handset pressbar for paging; rotary selector switch

Mounting................................................... Flush-mount or similar location; four 0.25-inch mounting holes

®

and SmartSeries systems. The remote subset includes a pressbar handset, a

Temperature range ............................................................................... −22 °F to 158 °F (−30 °C to +70 °C)

Connections ..................................................................... 8-foot cable with connector, hard-wired to subset

Front panel dimensions........................................................... 6.00 H × 6.00 W inches (152.4 × 152.4 mm)

Behind panel ................................................................................................................ 2.5 inches (63.5 mm)

Cutout dimensions ................................................ 5.00 W × 4.88 H × 2.5 D inches (127 × 124 × 63.5 mm)

Shipping weight .................................................................................................................. 3.9 lbs. (1.77 kg)

Approvals

NRTL certified for use in US and Canada.............................................. Class I, Div. 2, Groups A, B, C, D,

when connected to a certified GAI-Tronics Model 7245 Amplifier Enclosure
using a certified GAI-Tronics Model 723 Amplifier

CE Mark

GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA

610-777-1374  800-492-1212  Fax: [phone]

V

ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

Pub. DS7165-102

Model 7165-102 Flush-Mount Multi-Party Subset Page: 2 of 2

Figure 1. Model 7165-102 Flush-Mount Subset

Outline

Figure 2. Model 7165-102 Flush-Mount Subset

Side View

f:\standard ioms - current release\data sheets\ds7165-102.doc
11/10