General Information .......................................................................................................................1
Scope of Manual ...................................................................................................................................... 1
Features and Functions .......................................................................................................................... 1
Power Connector ................................................................................................................................................... 3
Pot R7 ................................................................................................................................................................... 5
Wide Range (110/220 V AC/270 V DC) Power Supply PCBA ............................................................ 6
Pot 2 ...................................................................................................................................................................... 6
Test Equipment ................................................................................................................................................... 10
Ordering Replacement Parts ............................................................................................................... 16
Service and Repair ................................................................................................................................ 16
Field Replacement Items ...................................................................................................................... 19
GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Pub. 42004-387G
GAI - TRONI CS
A HUBBELL COMPANY
®
Model 4512-001, 4512-001FR, 4514-001
and 4514-001FR 6-Channel Radios
Confidential ity Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
Scope of Manual
This manual provides descriptive data and service
information for the following GAI-Tronics 6-Channel
Radios:
Model 4512-001 - 270 V dc
Frequ
encies programmed by custom
Mode
Mode
Model 4514-001FR - 110/220 V ac
l 4514-001 - 110/220 V ac
encies programmed by custom
Frequ
l 4512-001FR - 270 V dc
Frequ
encies programmed at the factory
Frequ
encies programmed at the factory
Fea tures and Functions
Easy installation and maintenance
Portability with integral handl
Prog
Heavy-duty industrial power supply and power line filter eliminates the need for external filtering
Selection of power sources, speakers, and antennas provides system configuration flexibility
Selectable 2-watt or 5-watt RF transmit power
High power receive audio and noise-canceling microphone for noisy environments
rammable CTCSS and DPL provided as standard
er
er
ure 1. GAI-Tronics 6-Channel Radio
Fig
e
Standby/emergency battery option (integral to the chassis) providing continuous operation during
temporary power interruptions
GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Pub. 42004-387G
Model 4512-001, 4512-001FR, 4514-001, and 4514-001FR 6-Channel Radios Page 2 of 19
Description
The GAI-Tronics 6-Channel Radio is a stationary-mounted UHF transceiver suited for industrial
complexes, especially in cranes or other mobile equipment. It has a heavy-duty housing and includes a
choice of power sources (270 V dc or 110/220 V ac), microphones, speakers, and antennas. It has a
choice of 2-watt or 5-watt RF output, and CTCSS for private communications is selectable.
The radio measures 11.25 W 14.14 H 3.00 D inches. The housing is also a mounting bracket, and
includes an integral handle. The mounting bolts double as support feet when the unit is placed
horizontally on a flat surface such as on a desktop.
The channel selector switch and the power, speaker, and microphone connectors are located on the top of
the unit. The antenna connection is on the underside of the unit and remains easily accessible when the
unit is mounted. Refer to Figure 2 and Figure 3 below.
The standard power supply is nominal 120 V ac. There are 110/220 V ac or 270 V dc power supply
options available. Added filtering is standard for the 270 V dc option. The Radio Transceiver Module is
easily replaceable in the field, but must be reprogrammed by a qualified technician.
f:\standard ioms - cur rent release\42004 instr. manuals\420 04-387g.doc
02/15
Fig
ure 2. Outline of 6-Channel Radio
Pub. 42004-387G
Model 4512-001, 4512-001FR, 4514-001, and 4514-001FR 6-Channel Radios Page 3 of 19
Connectors
Refer to Figure 3 below for the location of the connectors and channel selector switch.
ure 3. Top View of the 6-Channel Radio
Fig
Power Connector
Refer to Figure 3 for the locations of the connectors. The pinout for the power connector is as follows:
Table 1. Model 4512-001 Connector Pinout Table 2. Model 4514-001 Connector Pinout
Pin
No. Function
Pin
No. Function
A Spare A Line hot
B 270 V dc pos B Line neutral
C 270 V dc neg C Spare
D Spare
f:\standard ioms - cur rent release\42004 instr. manuals\420 04-387g.doc
02/15
Pub. 42004-387G
Model 4512-001, 4512-001FR, 4514-001, and 4514-001FR 6-Channel Radios Page 4 of 19
Speaker Connector
The speaker connector pinout is as follows:
Table 3. Speaker Connector Pinout
Pin No. Function
A Common
B Carrier detect output
C 8-ohm speaker
WARNIN G
Do not ground any speaker line as damage may occur to the speaker and/or
radio. Jumper P6 must be in position 2-3 to activate the carrier detect output. Refer to Table 6 on
page 5 and Figure 7 on page 12.
Microphone Connector
The microphone pinout is as follows:
Table 4. Microphone Connector Pinout
Pin No. Function
A Mic high
B PTT (Transmit key)
C Mic Lo
D 15 V dc power
Antenna Connector
The antenna connector is a coax cable connector.
Channel Selec tor Switch
The channel selector switch on the top of the unit allows easy selection among the six labeled channels.
In addition, a lighted LED provides indication of the state of the radio.
f:\standard ioms - cur rent release\42004 instr. manuals\420 04-387g.doc
02/15
Pub. 42004-387G
Model 4512-001, 4512-001FR, 4514-001, and 4514-001FR 6-Channel Radios Page 5 of 19
Radio T ransceiver Mo dule
The Radio Transceiver Module’s range is 450–470 MHz, and the six channel frequencies can be
programmed in steps of 12.5 kHz at the factory to the customer’s specifications. The Radio Transceiver
can also be programmed for CTCSS or DPL.
N
OTES:
1. Whe
othe
2. Cer
below
n the Radio Transceiver Module is programmed for CTCSS or DPL it can only communicate w
r radios that have the same CTCSS or DPL programming.
tain transmit and receive frequencies within the radio’s range are unavailable. Refer to Tabl
for these frequencies. Do not attempt to program the radio for these frequencies.
Table 5. UHF (450–470 MHz)
ith
e 5
Receive
(MHz)
Transmit
(MHz)
460.80000 460.78750
461.23750 460.79375
461.24375 460.80625
461.25625 460.81250
461.26250
Interface PCBA
The Interface PCBA contains four jumper settings, which can be configured in accordance with Table 6
below.
Table 6. Jumper Table
Jumper
Name Function Position
P1 Receive Audio Level Select 1-2 = High level
2-3 = Low level attenuated 14 dB
Default
(as shipped)
1–2
P4 Audio Amp Enable 1-2 = Enable
P5 Dynamic Mic/Carbon Mic Enable 1-2 = Enable
P6 Optional Carrier Detect Output 1-2 = Disable
P8 RF Output Power Selection 1-2 = Low Power (2-watt)
Pot R7
R7 is used to adjust the speaker level. Refer to Figure 4 on page 7 for the location of the pot. Refer to the
“Installation” section for instructions for speaker output adjustment.
f:\standard ioms - cur rent release\42004 instr. manuals\420 04-387g.doc
02/15
1–2
2-3 = Disable
1–2
2-3 = Disable
1–2
2-3 = Enable*
1–2
2-3 = High Power (5-watt)
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.