GAI-Tronics 190-003PS User Manual
Pub. 42003-266A
GAI-TRONICS® CORPORATION
A HUBBELL COMPANY
Weatherproof Power Supply Kit
Model 190-003PS
Confidential ity Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 190-003PS Weatherproof Power Supply Kit is intended to be used with the VoIP and VoIP
with WiFi Addressable Amplified Speakers. It provides a 24 V dc output used to obtain a the full 30-watt
output from the speaker.
The Model 190-003PS Weatherproof Power Supply Kit includes the following components:
Qty Description
1 24 V dc power supply
1 Mounting bracket
1 Three-gang electrical box
4 Mounting screws for bracket
4 Mounting screws for power supply
1 Box cover and gasket
4 Tamper-resistant screws for cover
1 Conduit hub, ¾-inch
1
1 Installation instructions
1 DC power cable harness
1 AC power cable harness
1 Tamper-proof Torx bit
¾-inch 3 inches galvanized conduit nipple
Installation
Refer to Figure 1 for installation details.
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 800-492-1212 Fax: 610-796-5954
V
ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS
Pub. 42003-266A
ODEL 190-003PS WEATHERPROOF POWER SUPPLY KIT Page 2 of 3
M
Figure 1. Power Supply Installation
Mounting
Addressable Amplified Speaker
Prior to mounting the speaker:
1. Remove the conduit insert from bushing (white).
2. Attach the conduit nipple to weatherproof conduit box
3. Attach the box/conduit nipple to the speaker bushing.
4. Install the power supply bracket, power supply and terminal block in the conduit box in accordance
with Figure 2. Plug in cable harnesses and route wires per Figure 3.
e:\standard ioms - current release\42003 kit manuals\420 03-266a.doc
11/13
Loading...