GAI-Tronics 190-001 User Manual

Pub. 43003-042A

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

Battery Backup Kit

Model 190-001BB

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.

General Information

The Model 190-001BB Battery Backup Kit is designed for use in the Model CB193-xxx, CB-194-xxx,
and CB195-xxx RF Call Boxes. This kit includes the following components:

Qty Description

1 Battery, 12 V, 1.3 Ah
1 Battery Bracket
1 Gasket Pad (adhesive backed)
2

Screw, #6-32 × .25-inch

Installation

Refer to Figure 1 on page 2.

1. Peel the covering and apply the adhesive-backed gasket pad to the interior wall of the call box where

the battery will be located.

2. For Model CB193-xxx and CB194-xxx RF Call Boxes, install the battery bracket using the two #6-32

screws provided. For the Model CB195-xxx RF Call Box, remove the three screws installed within
the call box and use them to install the battery bracket. Discard the two screws provided with this kit.

3. Insert the battery in the battery bracket.

4. Connect the call box wiring to the battery terminals: red to the positive terminal, and black to

negative terminal.

GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA

610-777-1374  800-492-1212  Fax: [phone]

VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

Pub. 43003-042A

MODEL 190-001BB BACKUP REPLACEMENT KIT Page: 2 of 2

Figure 1. Installation of the gasket pad, battery bracket, and battery in the RF Call Boxes

d:\radio products-current release\43003\43003-042a\43003-042a.doc
05/06