GAI-Tronics 12806-001 User Manual

Pub. 42003-253A

GAI-TRONICS® CORPORATION

A HUBBELL COMPANY

RigCom Hinge Kit

Model 12806-001

Confidential ity Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.

General Information

The Model 12806-001 RigCom Hinge Kit is designed for use with GAI-Tronics Model 400-001, Model
400-002NS and Model 400-003 RigCom Stations.

The Model 12806-001 RigCom Hinge Kit includes the following components:

Qty Description

1 Set of Hinges
8

¼-20  1 ¼-inches hex head bolts

Installation

1. Attach the bottom hinge with pin to the rear enclosure with two ¼-20 bolts (note orientation).

2. Attach the top hinge to the front cover with two ¼-20 bolts by sliding it over the pin in the bottom

hinge. Refer to Figure 1.

GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA

610-777-1374  800-492-1212  Fax: [phone]

V

ISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

Pub. 42003-253A

ODEL 12806-001 RIGCOM HINGE KIT Page 2 of 2

M

Figure 1.

f:\standard ioms - current release\42003 kit manuals \42003-253a. doc
07/12