Gaggia RI8260-01 operation manual [de]

Type RI8260, SUP047G

GAGGIA VELASCA

USER MANUAL

BENUTZERHANDBUCH

MANUALE UTENTE

ESPRES SO

ESPRES SO LU NGO

STEAM

HOT WATER

26 25

21 22

2728

English

Introduction ______________________________________________________________________ 4 Important ________________________________________________________________________ 5 Warning_________________________________________________________________________ 5 Caution__________________________________________________________________________ 6 Electromagnetic fields (EMF)________________________________________________________ 7 Machine overview (Fig. 1)___________________________________________________________ 7 The display ______________________________________________________________________ 7 First installation ___________________________________________________________________ 8 Manual rinsing cycle _______________________________________________________________ 10 AquaClean filter __________________________________________________________________ 10 AquaClean filter installation _________________________________________________________ 11 Replacing the AquaClean filter ______________________________________________________ 11 Using the machine ________________________________________________________________ 12 Brewing coffee with beans__________________________________________________________ 12 Adjusting the coffee quantity ________________________________________________________ 12 Adjusting the grind setting__________________________________________________________ 12 Frothing milk_____________________________________________________________________ 13 Hot water ________________________________________________________________________ 13 Cleaning and maintenance _________________________________________________________ 13 Weekly cleaning of the brew group___________________________________________________ 13 Lubrication ______________________________________________________________________ 14 Classic milk frother cleaning (daily) ___________________________________________________ 15 Classic milk frother and steam wand cleaning (weekly) __________________________________ 15 Descaling ________________________________________________________________________ 15 Descaling procedure ______________________________________________________________ 16 Interruption of the descaling cycle ___________________________________________________ 17 Warning icons and error codes ______________________________________________________ 17 Meaning of error codes_____________________________________________________________ 19 Ordering accessories_______________________________________________________________ 19 Guarantee and support ____________________________________________________________ 20 Recycling________________________________________________________________________ 20 Troubleshooting___________________________________________________________________ 20

Introduction

Congratulations on buying this Gaggia Velasca full automatic espresso machine! The machine is suitable for preparing espresso coffee using whole coffee beans.

English

Important

Warning

Connect the machine to a wall socket with a voltage matching the technical specifications of the machine.

Connect the machine to an earthed wall socket.

Do not let the power cord hang over the edge of a table or counter, or touch hot surfaces.

Never immerse the machine, mains plug or power cord in water (danger of electrical shock).

Do not pour liquids on the power cord connector.

Never direct the hot water jet towards body parts: danger of burns.

Do not touch hot surfaces. Use handles and knobs.

Switch off the machine with the main switch located on the back and remove the mains plug from the socket:

If a malfunction occurs.

If the machine will not be used for a long time.

Before cleaning the machine.

Pull on the plug, not on the power cord.

Do not touch the mains plug with wet hands.

Do not use the machine if the mains plug, the power cord or the machine itself is damaged.

Do not make any modifications to the machine or its power cord.

Only have repairs carried out by a service center authorized by Gaggia to avoid a hazard.

The machine should not be used by children younger than 8 years old.

This machine can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the machine in a safe way and if they understand the hazards involved.

English

Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.

Keep the machine and its cord out of the reach of children aged less than 8 years.

Children should be supervised to ensure that they do not play with the machine.

Never insert fingers or other objects in the coffee grinder.

The machine shall not be placed in a cabinet when in use.

Caution

This machine is intended for normal household use only. It is not intended for use in environments such as staff kitchens of shops, offices, farms or other work environments.

Always put the machine on a flat and stable surface. Keep it in upright position, also during transport.

Do not place the machine on a hotplate or directly next to a hot oven, heater or similar source of heat.

Only put roasted coffee beans in the bean hopper. If ground coffee, instant coffee, raw coffee beans or any other substance is put in the coffee bean hopper, it may cause damage to the machine.

Let the machine cool down before inserting or removing any parts. The heating surfaces may retain residual heat after use.

Never fill the water tank with warm, hot or sparkling water, as this may cause damage to the water tank and the machine.

Never use souring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the machine. Simply use a soft cloth dampened with water.

Descale your machine regularly. The machine indicates when descaling is needed. Not doing this will make your appliance stop working properly. In this case repair is not covered under your guarantee.

Do not keep the machine at temperatures below 0°C.Water left in the heating system may freeze and cause damage.

ESP RESS O

English

Do not leave water in the water tank when the machine is not used over a long period of time. The water can be contaminated. Use fresh water every time you use the machine.

Electromagnetic fields (EMF)

This Gaggia appliance complies with all applicable standards and regulations regarding exposure to electromagnetic fields.

Machine overview (Fig. 1)

1 Lid of the bean hopper 2 Coffee bean hopper 3 Socket for cord 4 Water tank 5 Pre-ground coffee compartment 6 Grinder adjustment knob 7 Control panel 8 Coffee grounds container 9 Coffee dispensing spout 10 Drip tray 11 Drip tray cover 12 Drip tray full indicator 13 ESPRESSO button 14 ESPRESSO LUNGO button 15 AROMA STRENGTH button 16 Standby button 17 MENU button 18 HOT WATER button 19 STEAM button 20 Cord 21 Cleaning brush (for specific types only) 22 Grease (for specific types only) 23 Pre-ground coffee measuring spoon 24 Water hardness tester 25 Coffee residues drawer 26 Brew group 27 Hot water/steam wand 28 Classic milk frother

The display

Some buttons can be used to navigate through the menus:

ESPRESSO button = ESC button: you can press this button to return to the main menu.The ESC button takes you back one level.You may have to press the ESC button. several times to get back to the main menu.

ST EAM

MEN U

English

AROMA STRENGTH button = OK button: you can press this button to select, confirm or stop a function.

STEAM button = UP button: press this button to scroll up through the display menu

MENU button = DOWN button: press this button to scroll down through the display menu.

First installation

1 Slide the drip tray with drip tray cover into the machine. 2 Remove the water tank. 3 Fill the water tank to the MAX level with fresh water. 4 Fill the coffee bean hopper with coffee beans. 5 Insert the small plug into the socket located on the back of the machine.

Insert the mains plug into the wall socket.

6 Attach the classic milk frother to the hot water/steam dispensing spout. 7 Place a container under the classic milk frother. 8 Press the STANDBY button to switch on the machine. 9 Press the OK button to start the automatic circuit priming cycle. 10 The display shows the following icon to indicate that the machine is

heating up.

The machine performs an automatic rinsing cycle.

AQUA CLEA N

AQUA CLE AN

FILTE R?

AQUA CLEA N

INS TALL

FILTE R

AQ U A CLEA N

0/8

OFF

English

11 The display shows the following icon to indicate you have to install the

AquaClean filter.

If you want to install the AquaClean filter afterwards, press the ESC button and continue with the manual rinsing cycle. For installation, see chapter ‘AquaClean filter’.

12 Press the OK button. The display shows the following icon. 13 Remove the AquaClean filter from its packaging. Shake the filter for about

5 seconds.

14 Immerse the filter upside down in a jug with cold water and wait until no

more air bubbles come out.

15 Remove the water tank from the machine, empty it and insert the filter

vertically onto the filter connection.

16 Fill the water tank with fresh water and slide it back into the machine. 17 Press the OK button.

18 Select ON on the display and confirm the activation by pressing the OK

button.

AQUA CLEA N

10 0%

English

The display shows a tick icon to confirm the activation.

19 The display shows the filter ready icon to indicate the AquaClean filter

has been installed correctly.

20To rinse the filter, press the HOT WATER button and let half a litre of

water flow out from the hot water/steam dispensing spout. Discard this water.

It can take a while until water comes out of the hot water dispensing spout. The filter needs to be fully filled and rinsed with water.

The machine is ready for use.

After installing the AquaClean filter, you do not have to perform the manual rinsing cycle.

Manual rinsing cycle

1 Place a container under the coffee dispensing spout. 2 Press the AROMA STRENGTH button to select pre-ground coffee. Do not

add pre-ground coffee.

3 Press the ESPRESSO LUNGO button. The machine starts dispensing

water.

4 When the machine stops dispensing, empty the container. Repeat steps

1-3 twice.

5 Place a container under the classic milk frother. 6 Press the HOT WATER button. Hot water dispensing starts automatically.

Dispense water until the display shows the no water icon.

7 Fill the water tank with fresh water up to the MAX level and remove the

container.

The machine is ready for use.

AquaClean filter

The AquaClean filter is designed to reduce limescale deposits in your coffee machine and provide filtered water to preserve the aroma and flavor of each cup of coffee. If you use a series of 8 Aquaclean filters as indicated in this user manual, you don't have to descale your machine for 5000 cups (with a capacity of 100 ml).

AquaClean filter installation

AQ U A CLEA N

0/8

OFF

Your machine has to be completely limescale-free before you start to use the AquaClean filter. If you did not activate the filter upon first use and brewed more than 50 cups (with 100 ml capacity), you need to descale the machine before you activate the filter.

1 Remove the AquaClean filter from its packaging. Shake the filter for about

5 seconds.

2 Immerse the filter upside down in a jug with cold water and wait until no

more air bubbles come out.

3 Remove the water tank from the machine and insert the filter vertically

onto the filter connection.

4 Fill the water tank with fresh water and slide it back into the machine. 5 Press the MENU button and scroll to the AquaClean filter option. Then

press the OK button to select the AquaClean filter option.

If you are installing the filter at first time use, follow the steps in chapter ‘First installation’.

English

6 Select ON on the display and confirm the activation by pressing the OK

button.

Note: The display shows a tick icon to confirm the activation.

7 To rinse the filter, press the HOT WATER button and let half a litre water

flow out from the hot water/steam dispensing spout. Discard this water.

Note: It can take a while until water comes out of the hot water dispensing spout. The filter needs to be fully filled and rinsed with water.

8 Use the sticker attached to the plastic packaging of the AquaClean filter

to write down the date of the next filter replacement (after 3 months). Place the sticker on the water tank.

The filter and machine are now ready for use.

Replacing the AquaClean filter

Replace the filter every 3 months or at machine request.

English

Display icon AquaClean filter What to do

10% + icon flashes The performance of this filter is decreasing. It is

recommended to remove the old filter and place the new filter as described in section 'AquaClean filter installation’ to retain proper filter performance.

0% + icon flashes Remove the old filter immediately and place the new

0% and icon disappears from display You first need to descale the machine before you can

After 8 filter replacements you need to descale the machine chapter ‘Descaling’, section ‘Descaling procedure’.

filter as described in section ‘AquaClean filter installation’. When you activate a new filter, the display shows the word NEW. Press the OK button to confirm the activation.

place and activate a new filter.

Using the machine

Brewing coffee with beans

1 Adjust the coffee dispensing spout to suit the size of your cup. 2 Press the AROMA STRENGTH button to select the desired coffee

strength from 1-5 beans.

3 Press the ESPRESSO button to brew an espresso or press the ESPRESSO

LUNGO button to brew a coffee.

Adjusting the coffee quantity

1 Press and hold the ESPRESSO button or ESPRESSO LUNGO button until

the display shows the word MEMO.

2 When the cup contains the desired amount of coffee, press the OK

button to save the selected quantity.

Adjusting the grind setting

Note: You can only adjust the grinder settings when the machine is grinding coffee beans.

1 Open the lid of the bean hopper. 2 Place a cup under the coffee dispensing spout. 3 Press the ESPRESSO button. 4 While the machine grinds the coffee, place the end of the measuring

spoon handle on the grinder adjustment knob in the coffee bean hopper. Use the spoon to press and turn the knob to the left or to the right one notch a time.

5 There are 10 different grinding degree settings you can choose from. The

smaller the dot, the stronger the coffee.

Coarse grind: lighter taste, for dark roasted coffee blends.

Fine grind: bolder taste, for light roasted coffee blends.

6 Brew 2-3 coffees to taste the difference.

Frothing milk

Warning: Danger of scalding. Only grab the steam wand by its protective handle. Dispensing may be preceded by small jets of hot water.

1 Fill 1/3 of a jug with cold milk. 2 Immerse the classic milk frother in milk. Press the STEAM button. 3 Froth the milk by gently swirling the jug and moving it up and down. 4 Press the OK button to stop frothing.

Hot water

Warning: Danger of scalding. Only grab the steam wand by its protective handle. Dispensing may be preceded by small jets of hot water.

1 Place a jug under the classic milk frother. 2 Press the HOT WATER button. Hot water dispensing starts automatically. 3 Press the OK button to stop hot water dispensing. Remove the container.

Cleaning and maintenance

English

Weekly cleaning of the brew group

Clean the brew group once per week.

1 Remove the coffee grounds container and open the service door. 2 Remove the coffee residues drawer.

3 To remove the brew group, press the lever and pull the brew group out of

the machine.

4 Rinse the brew group with fresh water and let it air dry.

English

5 To place the brew group back, make sure that the lever is in contact with

the base of the brewing unit.

Note: If it is not in contact with the base, push it down.

6 Make sure the locking hook of the brew group is in the correct position.

To position the hook correctly, push it upwards until it is in uppermost position.

7 The hook is not correctly positioned if it is still in bottommost position. 8 Slide the brew group back into the machine along the guiding rails on the

sides until it clicks into position. Then place the coffee residues drawer back in the machine.

Lubrication

Lubricate the brew group after approximately 500 cups of coffee or once a month.

1 Apply some lubricant around the shaft in the bottom of the brewing unit.

English

2 Apply lubricant to the rails on both sides, as shown in the illustration. 3 Slide the brew group back into the machine along the guiding rails on the

sides until it clicks into position. Then place the coffee residues drawer back in the machine.

Classic milk frother cleaning (daily)

Remove the external part of the classic milk frother and rinse it with fresh water.

Classic milk frother and steam wand cleaning (weekly)

1 Remove the external part of the classic milk frother and rinse it with fresh

water.

Descaling

2 Remove the upper part of the classic milk frother from the steam wand

and rinse it with fresh water.

3 Clean the steam wand with a wet cloth. 4 Reassamble all the classic milk frother parts.

You have to descale the machine when the display shows the CALC CLEAN icon or after 8 AquaClean filter replacements.

START

CALC

CLEAN

CA LC

CLE AN

English

If you do not descale when the display shows the CALC CLEAN icon or after 8 AquaClean filter replacements, the machine may stop working properly. In this case, repairs are not covered by the guarantee).

Never drink the water with descaling mixture that you pour into the water tank or any water with residues that comes out of the machine during the descaling procedure.

The descaling procedure lasts approximately 30 minutes. Only use Gaggia descaling solution to descale the machine. Gaggia

descaling solution is designed to ensure optimal performance of the machine. The use of other products may damage the machine and leave residues in the water. You can buy Gaggia descaling solution from your local reseller or from the authorized service centers. Contact details are included in the warranty booklet supplied separately or visit www.gaggia.com/n-m- co/espresso/world-wide or www.gaggia.it/n-m-co/espresso/contact.

Descaling procedure

You can pause the descaling or rinsing cycle by pressing the ESC button. The display will show the following icon. To continue the descaling or rinsing cycle, press the OK button.

1 Remove and empty the drip tray. Slide the drip tray back into the

machine.

Note: Remove the AquaClean water filter from the water tank (if present).

2 Remove the classic milk frother from the steam wand. 3 Press the OK button.

4 The display shows the following icon to indicate that the machine enters

the descaling cycle. If you want to exit the descaling cycle, press the ESC button.

5 Pour the entire bottle of Gaggia descaling solution (250ml) into the water

tank.

6 Add water to the descaling solution in the water tank up to the CALC

CLEAN indication.

7 Place a large container (1.5 l) under the steam wand and dispensing

spout.

8 Press the OK button to start the descaling cycle.

The machine dispenses the entire descaling solution at regular intervals through the steam wand and dispensing spout (this takes approximately 25 minutes).

9 Wait until all of the descaling solution has been dispensed. Remove and

empty the container.

10 Remove and empty the drip tray. Slide the drip tray back into the

machine.

11 Rinse the water tank and fill it with fresh water up to the CALC CLEAN

indication. Slide the water tank back into the machine.

12 Place the container back under the steam wand and dispensing spout. 13 Press the OK button to start the rinsing cycle (this takes approximately 4

minutes).

CALC

CLEAN

The display shows the following icon to indicate that the rinsing cycle is finished.

14 The display shows a tick icon. 15 Rinse the water tank and fill it with fresh water up to the MAX level. Slide

the water tank back into the machine.

16 Press the OK button to end the descaling cycle. 17 Place a container under the steam wand and dispensing spout.

18 The display shows the following icon to indicate that the machine is

heating up.

The machine performs an automatic rinsing cycle.

19 Remove the container. Remove and empty the drip tray. SLide the drip

tray back into the machine.

20Place the AquaClean filter back in the water tank. Reinsert the classic milk

frother.

21 Remove and rinse the brew group see chapter ‘Cleaning and

maintenance’, section ‘Clean the brew group’.

The machine is now ready for use.

Interruption of the descaling cycle

Once the descaling cycle has started, you must complete it till the very end without turning off the machine. In case you get stuck during the cycle or in case of power failure or accidental disconnection of the power cord, you can exit by pressing the standby button. If this occurs, empty and rinse carefully the water tank, then fill it up to the CALC CLEAN level. Follow the instructions in chapter ‘First installation’, section ‘Manual rinsing cycle’ before brewing any beverage. If the cycle was not completed, the machine will require another descaling cycle to be performed at your earliest convenience.

English

Warning icons and error codes

Warning signals are displayed in red. Below you find a list of the warnings that may appear on the display and their meaning.

Fill the water tank with fresh water to the MAX level indication.

English

The bean hopper is empty. Put new coffee beans in the bean hopper.

The brew group is not in the machine. Insert the group.

Close the service door.

Remove the coffee grounds container and empty it.

There is too much powder in the brew group. Clean the brew group.

If an error code is triggered, check the section 'Meaning of error codes' to see what the code on the display means and what you can do. The machine cannot be used when this icon is on the display.

You forgot to place the lid on the pre-ground coffee compartment. If you do not place it back within 30 seconds the display will return to the main menu and the brewing cycle will be stopped.

Meaning of error codes

Error code

1 Coffee grinder blocked Coffee exit duct

Problem Cause Possible solution

clogged

English

Clean the coffee exit duct thoroughly with the handle of the multifunctional tool or a spoon handle.

3 - 4 The brew group cannot

be removed.

5 Water circuit problem There is air in the water

Other error codes Switch the machine off

If the above solutions do not help to remove the error code icon from the display and bring the machine back to normal working order, contact the Gaggia hotline. Contact details can be found in the warranty booklet or or visit www.gaggia.com/n-m-co/espresso/world-wide or www.gaggia.it/n- m-co/espresso/contact.

The brew group is not positioned correctly.

circuit.

Close the maintenance door. Switch the machine off and back on again. Wait for the ‘machine ready’ icon on the display and then remove the brew group.

Remove and place back the water tank a couple of times. Make sure you insert it into the machine properly. Check if the water tank compartment is clean.

and switch it back on again after 30 seconds. Try this 2 or 3 times.

Ordering accessories

To clean and descale the machine, only use the Gaggia maintenance products. These products can be purchased from your local reseller or from the authorized service centers.

Maintenance products:

Descaling solution

AquaClean filter

Brew group grease

Degreasing tablets

English

Guarantee and support

If you need information or support, please visit www.gaggia.com/n-mco/espresso/world-wide or www.gaggia.it/n-m-co/espresso/contact, or

read the separate warranty booklet.

Recycling

This symbol means that this product shall not be disposed of with normal household waste (2012/19/EU).

Follow your country's rules for the separate collection of electrical and electronic products. Correct disposal helps prevent negative consequences for the environment and human health.

Troubleshooting

Problem

The machine does not switch on

Cause Solution

The machine is disconnected or the main switch is in the OFF position.

Check if the mains cord is inserted correctly

Make sure the main switch is set in ON position.

The machine is in DEMO mode.

The drip tray is quickly filled.

The coffee grounds container full icon remains displayed.

The standby button has been pressed for more than 8 seconds.

This is normal. The machine uses water to rinse the internal circuit and brew group. Some water flows through the internal system directly into the drip tray.

The coffee grounds container was emptied while the machine was switched off.

The coffee grounds container was placed back too fast.

Switch the machine off and then on again using the main switch on the back of the machine.

Empty the drip tray when the 'drip tray full' full indicator pops up through the drip tray cover.

Place a cup under the dispensing spout to collect rinsing water.

Always empty the coffee grounds container while the machine is ON. If the coffee grounds container is emptied while the machine is switched off, the coffee cycle counter is not reset. In that case, the 'empty coffee grounds container' message will stay on the display even though the container is not full.

Do not place back the coffee grounds container until the screen message prompts you to put it back

English

The brew group cannot be removed.

The brew group cannot be inserted.

The coffee has too little cream or is watery.

The brew group is not positioned correctly.

The coffee grounds container is not removed.

The machine is still in the descaling process.

The brew group is not in the correct position.

The grinder is set to a coarse setting.

Close the maintenance door. Switch the machine off and back on again. Wait for the machine ready screen to appear and then remove the brew group.

Remove the coffee grounds container before removing the brew group.

You cannot remove the brew group when the descaling process is active. First complete the descaling process and then remove the brew group.

The brew group was not put in rest position before it was placed back. Make sure that the lever is in contact with the base of the brew group and that the hook of the brew group is in the correct position.

Reset the machine by switching it on and off. Place the drip tray and the coffee grounds container back. Leave the brew group out. Close the maintenance door and switch the machine on and off. Then try to reinsert the brew group.

Adjust the grinder to a finer setting.

The coffee is not hot enough.

The brew group is dirty. Clean the brew group. For thorough

The coffee exit duct is dirty. Clean the coffee exit duct thoroughly

The coffee blend is not the correct one.

The machine is performing its self-adjustment.

The cups you use are cold. Preheat the cups by rinsing them with

The temperature is set too low. Check the menu settings.

You added milk. Whether the milk you add is warm or

cleaning, follow the monthly cleaning procedure with the degreasing tablet.

with the handle of the multifunctional tool or a spoon handle.

Try another coffee blend.

Brew a few cups of coffee.

hot water.

Set the temperature to high in the menu.

cold, it will always decrease the temperature of the coffee to some extent.

+ 47 hidden pages

Gaggia RI8260-01 operation manual [de]

Contents

Introduction

Important

Warning

Caution

Electromagnetic fields (EMF)

Machine overview (Fig. 1)

The display

First installation

Manual rinsing cycle

AquaClean filter

AquaClean filter installation

Replacing the AquaClean filter

Using the machine

Brewing coffee with beans

Adjusting the coffee quantity

Adjusting the grind setting

Frothing milk

Hot water

Cleaning and maintenance

Weekly cleaning of the brew group

Lubrication

Classic milk frother cleaning (daily)

Classic milk frother and steam wand cleaning (weekly)

Descaling

Descaling procedure

Interruption of the descaling cycle

Warning icons and error codes

Meaning of error codes

Ordering accessories

Guarantee and support

Recycling

Troubleshooting