How it Works
Gaggia
Loading...
PLATINUM SWING UP

Gaggia PLATINUM VOGUE, PLATINUM EVENT, PLATINUM SWING, PLATINUM SWING UP, PLATINUM VISION Technical & Service Manual

Download
Emissione Luglio 2007
REV.00
TECHNICAL SERVICE
MANUAL
Ideas with Passion
SECTION 1
INTRODUCTION
REV.00
TALEA Section 01
REV00 - August 06
1.1 Documentation required
The following technical documentation is required for repairs:
Instruction booklet for specific model. Technical documentation for specific model (diagrams, exploded drawings).
1.2 Tools and equipment required
As well as the standard equipment, the tools listed below are required.
1 special screwdriver with Torx T10 tip.
1 digital thermometer with full 200°C scale. This must be suitable for measuring in liquids and on surfaces.
1 set of pliers for Oetiker clamps.
1 pincer.
1 CC -A - Vdc tester.
1.3 Safety warnings
Before starting operations on the machine, consult the relative instruction booklet. Observe all current standards related to the repair of domestic appliances.
Always disconnect the power plug from the mains before carrying out repairs. Simply turning off the main switch is not sufficient to prevent electrical discharge.
This domestic appliance is rated with insulation class I. On completion of repairs, the insulation and dielectric rigidity tests must be performed.
1/2
TALEA Section 01
REV00 - August 06
Ideas with Passion
EVENT
- S B S
- Rapid Steam
TALEA - ODEA Cap. 01
REV00 - Luglio 07
3/3
SECTION 2
TECHNICAL DATA
REV.00
TALEA Section 02
REV00 - August 06
2.1 Product technical data
Ideas with Passion
SECTION 3
BRIEF
INSTRUCTIONS
REV.00
TALEA Section 03
REV00 - August 06
Ideas with Passion
Show text
8:30 a
Go to
diagnostics
Main menu
Beverage
set
tings
Maintenance
set
tings
Machine set
tings
Clock
Next
Go
back
The programming menu will open.
Detailed
beverage programming
Machine function programming
Exit
Next
page
After set
ting each of the following menus, press:
- “Go back” to be returned to the previous screen and save any new set
tings.
- “Previous settings” to reset previous values.
- “Go back to menu” to be returned to the main menu and save new set
tings.
Machine settings
Language &
display
Cup warmer
Water
set
tings
Go
back
Go back to
menu
Machine settings menu.
- Language & display = to set menu language and display contrast.
- Water settings = to set some water functions.
- Cup warmer = to set cut warmer functions.
To set current
time
Beverage settings
Espresso
Coffee
Long coffee
Go
back
Go back to menu
Beverage settings menu
To set general parameters for the dispense of beverages containing cof­f
ee, press the “beverage settings” key in the main menu.
Coffee settings
Pre-brewing
normal
Go
back
Go back to
menu
Temperature
medium
Aroma
normal
Water quantity
240 / 500
The following can be set for each beverage selected:
Pre-brewing
of coffee
The temperature of the dispensed coffee.
The amount of coffee to be
ground and use of
pre-ground coffee.
The amount of water to be used in dispensed coffee.
Clock settings
Time
Stand-by
Go
back
Go back to
menu
Clock menu
To set the current time and timer (for standby), press the “clock settings” key on the main menu.
To set current
time.
To set stand-by param­eters after cof
fee is
dispensed.
1/3
TALEA Section 03
REV00 - August 06
Ideas with Passion
Ideas with Passion
3.2 Maintenance and cleaning
3/3
TALEA Section 03
REV00 - August
STEPS
A Empt
y coffee grounds drawer. As instructed.
B Empt
y drip tray. As necessary.
C Clean w
ater tank. Once a week.
D Clean the cof
fee granule container. As necessary. E Clean casing. As necessary F Clean and gr
ease the brew group. Monthly or every
500 coffees.
H Descal
ing. As instructed.
J Clean drip tr
ay. Weekly.
K Clean cof
fee circuit. Weekly.
Descaling.
Hardness Water hardness
Descaling frequency
*
1 Soft water (up to 7ºdH) Approx. every 3 months/120 litres 2 Medium w
ater (7º-14ºdH) Approx. every 2 months / 90 litres
3 Har
d water (15º-21ºdH) Approx. every 6 weeks / 60 litres
4 V
ery hard water (over 21ºdH) Approx. every 4 weeks / 30 litres
* Without Prima water filter
Ideas with Passion
SECTION 4
DIAGRAMS
REV.00
TALEA Section 04
REV00 - August 06
Ideas with Passion
Ideas with Passion
Ideas with Passion
Loading...
+ 41 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use