Before you switch ON the appliance 5
Delivery5
Installation5
In daily use6
Damage6
Disposal6
Door lock7
Environmental protection8
Packaging8
Old appliances8
Getting to know your appliance9
Eco drying9
Control panel9
Appliance interior9
Info button10
Time setting10
Switching on the appliance for the first time11
Settings12
Water softening system / special salt14
Water hardness table14
Adjusting the water softening system14
Using special salt15
Detergent with a salt component15
Switching off water softening system15
Rinse aid15
Setting amount of rinse aid16
Switching off rinse aid refill indicator 16
Utensils16
Not suitable16
Glass and utensil damage16
Loading the dishwasher16
Upper basket17
Lower basket17
Cutlery basket17
Cutlery drawer18
Etagere18
Folding spikes18
Small items holder19
Knife rack19
Baking sheet spray head19
Gastronorm insert20
Unloading the dishwasher20
Adjusting the height of the basket20
Removing/installing cutlery drawer21
Removing/installing upper basket22
Removing/installing lower basket23
en
Detergent24
Adding detergent25
Combination detergent25
Overview of programmes26
Programme selection27
Information for test institutes27
Additional functions27
Power27
Half load27
Hygiene27
Intensive27
extraDry27
Energy Save27
Operating the appliance28
Programme data28
Changing the settings28
AquaSensor28
Time display28
Sensor setting28
extraDry28
Eco forecast28
Auto Power Off29
Emotion Light29
Front display29
Remaining time projection29
infoLight29
Changing start programme29
Tone volume29
Button volume29
Child-proof lock29
Eco drying30
Greeting30
Factory setting30
Switching the appliance on30
Time preselection30
Programme end31
Switching off the appliance31
Interrupting the programme31
Terminating the programme31
Changing the programme31
Cleaning and maintenance32
Overall condition of the machine32
Special salt and rinse aid32
Filters32
Spray arms33
Fault, what to do?33
Error message33
Waste water pump34
Fault table35
3
en Intended use
Customer service41
Installation and connection41
Contents of package42
Safety instructions42
Delivery42
Technical specifications42
Installation43
Drainage connection43
Drinking water connection43
Warm water connection44
Electrical connection45
Removal45
Transporting46
Protection against frost (Emptying the appliance)46
Intended use
Intended use
▯ This appliance is intended for use in the
home and domestic environments.
▯ Use the dishwasher only in the home and
only for its designated purpose: for washing
domestic dishes.
▯ This appliance is intended for use up to a
maximum altitude of 4000 metres above sea
level.
4
Safety instructions en
Safety instructions
Safety instructions
This appliance may be used by children over
the age of 8 years old and by persons with
reduced physical, sensory or mental
capabilities or by persons with a lack of
experience or knowledge if they are
supervised or are instructed by a person
responsible for their safety how to use the
appliance safely and have understood the
associated hazards.
Children must not play with, on, or around the
appliance. Children must not clean the
appliance or carry out general maintenance
unless they are at least 8 years old and are
being supervised.
Keep children below the age of 8 years old at a
safe distance from the appliance and power
cable.
Installation
▯ Following installation, ensure that the back
of the dishwasher is not freely accessible
(protection against contact due to hot
surface).
▯ Install and connect the appliance according
to the installation and assembly
instructions.
▯ Prior to installation, disconnect the
dishwasher from the power supply.
▯ Ensure that the protective conductor system
of the domestic supply has been correctly
installed.
▯ The electrical connection conditions must
correspond with the specifications on the
dishwasher rating plate 9:.
▯ If the power cord of this appliance is
damaged, it must be replaced with a
particular power cord.
Before you switch ON the appliance
Please read the instructions for use and
installation carefully. They contain important
information on how to install, use and maintain
the appliance.
Retain all documents for later use or for the
subsequent owner.
You can download the instructions for use
from our website free of charge. The relevant
Internet address can be found overleaf on
these instructions for use.
Delivery
1. Check the packaging and dishwasher
immediately for damage caused in transit.
Do not switch on a damaged appliance, but
contact your supplier.
To prevent injury, the power cord may be
purchased from customer service only.
▯ If the dishwasher is installed in a high-sided
unit, the unit must be secured properly.
▯ If the dishwasher is installed below or above
other domestic appliances, follow the
information for installation in combination
with a dishwasher in the installation
instructions for the particular appliances.
▯ Also follow the installation instructions for
the dishwasher to ensure that all appliances
are operated safely.
▯ If there is no information or if the
installation instructions do not include the
appropriate information, contact the
manufacturer of these appliances to ensure
that the dishwasher can be installed above
or below these appliances.
2. Please dispose of the packaging material in
an environmentally friendly manner.
3. Do not let children play with packaging and
its parts. There is a risk of suffocation from
collapsible boxes and film.
▯ If you cannot obtain any information from
the manufacturer, you must not install the
dishwasher above or below these
appliances.
▯ If you install a microwave oven above the
dishwasher, the microwave oven may be
damaged.
5
en Safety instructions
▯ Install built-under or integratable appliances
only under continuous worktops which have
been screwed to adjacent cupboards to
ensure stability.
▯ Do not install the appliance near heat
sources (radiators, heat storage tanks,
cookers or other appliances which generate
heat) and do not install under a hob.
▯ Please note that the insulation material of
the dishwasher power cord may melt next to
heat sources (e.g. heating / hot water
installations) or hot appliance parts. Make
sure that the power cord of the dishwasher
never comes into contact with heat sources
or hot appliance parts.
▯ After installing the appliance, ensure that
the plug is easily accessible. ~ "Electrical
connection" on page 45
▯ For some models:
The plastic housing on the water connection
contains an electric valve. The supply hose
contains electrical connection cables. Do
not cut through the supply hose. Do not
immerse the plastic housing in water.
In daily use
Read and observe the safety information and
instructions for use on the packaging for
cleaning and rinsing agents.
Disposal
1. Make redundant appliances unusable to
prevent subsequent accidents.
2. Dispose of the appliance in an
environmentally friendly manner.
:Warning – Risk of injury!
▯ To prevent injuries, e.g. caused by
stumbling, open the dishwasher only briefly
in order to load and unload the dishwasher.
▯ Knives and other utensils with sharp points
must be placed with the points downwards
in the cutlery basket*1b or horizontally on
the knife shelf* or in the cutlery
drawer*1*.
▯ Do not lean or sit on the open door.
▯ In the case of free-standing appliances,
ensure that the baskets are not overloaded.
The appliance could tip.
▯ If the appliance is not in a cavity and a side
panel is accessible, the door hinge area
must be covered at the side for reasons of
safety (risk of injury). The covers are
available as optional accessories from
customer service or specialist outlets.
* depending on the features of your
dishwasher
Damage
▯ The appliance may be repaired and opened
up by a technician only. To do this,
disconnect the appliance from the power
supply. Pull out the mains plug or switch off
the fuse. Turn off the tap.
▯ If the appliance is damaged, especially the
control panel (cracks, holes, broken
buttons), or the door function is impaired,
stop operating the appliance. Pull out the
mains plug or switch off the fuse. Turn off
tap, call customer service.
6
:Warning – Risk of explosion!
Do not add any solvents to the rinsing
compartment. Danger of explosion!
:Warning – Risk of scalding!
Open the door carefully when the programme
is still running. There is a risk of hot water
spraying out of the appliance.
Safety instructions en
:Warning – Risk to children!
▯ If fitted, use the childproof lock.
▯ Do not allow children to play with or operate
the appliance.
▯ Keep children away from detergents and
rinse aid. These may cause chemical burns
in the mouth, throat and eyes or
asphyxiation.
▯ Keep children away from open dishwasher.
There may be small parts in the dishwasher
which children could swallow and the water
inside the dishwasher is not drinking water
as it may contain detergent residue.
▯ Ensure that children do not place fingers in
the tablet collecting tray 1B. Small fingers
could become caught in the slots.
▯ When opening and closing the door on an
eye-level appliance, ensure that children do
not become jammed or crushed between
the appliance door and the cupboard door
below.
Activate the child-proof lock (door lock) as
follows:
1. Pull the catch of the child-proof lock
towards yourself (1).
2. Close the door (2).
The child-proof lock is activated.
Open the door with activated child-proof
lock (door lock) as follows:
1. Press the catch of the child-proof lock to
the right (1).
2. Open the door (2).
▯ Children could become locked in the
appliance (danger of suffocation) or get into
another dangerous situation.
Redundant appliances: Pull out the mains
plug, sever and dispose of the power cord.
Destroy the door lock so that the door can
no longer be closed.
Childproof lock (door lock) *
Door lock
The child-proof lock (door lock) protects
children from potential hazards which the
dishwasher poses.
:Warning – Risk of suffocation!
Children may become locked in the
dishwasher and suffocate. Always completely
close the appliance door when leaving the
dishwasher.
7
en Environmental protection
Deactivate the child-proof lock (door lock)
as follows:
1. Press the catch of the child-proof lock to
the right (1).
2. Press the catch of the child-proof lock
backwards (2).
The childproof lock is deactivated.
* depending on the features of your
dishwasher
Environmental protection
Environmental protection
Both the packaging of new appliances and the old
appliances themselves contain valuable raw materials
and recyclable materials.
Please dispose of the individual parts separated
according to type.
Please ask your dealer or inquire at your local authority
about current means of disposal.
Packaging
All plastic parts of the appliance are identified with
internationally standardised abbreviations (e.g. PS
polystyrene). Therefore, plastic waste can be sorted out
when the appliance is being disposed of.
Please follow the safety instructions under “Delivery”
~ Page 5.
Old appliances
Please follow the safety instructions under “Disposal of
your appliance” ~ Page 6.
This appliance has been
identified in accordance with
the European Directive 2012/
19/EU on Waste Electrical and
Electronic Equipment (WEEE).
The directive provides a
framework for the collection
and recycling of old
appliances, which is valid
across the EU.
8
Getting to know your appliance en
Getting to know your appliance
Getting to know your appliance
Diagrams of the control panel and the interior of the
appliance can be found at the front of the manual.
Individual positions are referred to in the text.
Eco drying
Your dishwasher features the Eco drying function. If you
have selected the Eco 50° programme, the door opens
automatically when the programme ends. You can switch
Eco drying on or off .
Control panel
See Fig. ~ Page 2
( On/off switch
0 Programme buttons **
8 Info button {
@ Display window at top
H Rinse aid refill indicator
P Salt refill indicator
X Selection buttons
` Time preselection
h Additional functions **
)" START button
)* < > button
)2 Door opener
): Front display *
* depending on the features of your dishwasher
Appliance interior
See Fig. ~ Page 2
1" Interior light *
1* Cutlery drawer *
12 Top basket
1: Upper spray arm
1B Tablet collecting tray
1J Lower spray arm
1R Dispenser for special salt
1Z Filters
1b Cutlery basket *
1j Bottom basket
9" Dispenser for rinse aid
9* Detergent dispenser
92 Lock for detergent dispenser
9: Rating plate
* depending on the features of your dishwasher
** number depending on the features of your
dishwasher
9
en Getting to know your appliance
Info button {
Info button
The Info button { can be used to display additional
programme information.
1. Press the Info button {8.
2. Press the programme button.
Information on the selected programme is indicated
on the display window at the top @.
3. To leave, press Info button { 8.
Time setting
Time setting
When the appliance is switched on the for the first
time, the time starts at 12:00 o’clock.
Set the time as follows:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button { 8 for 3 seconds until the
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4. Keep pressing button > )* until the time setting is
indicated on the display window at the top @.
5. Make the setting with setting buttons + - X. If the
selection buttons + - X are held down, the set
values are changed in 10-minute steps.
6. Press and hold the Info button {8 for 3 seconds.
The chosen setting has now been stored.
Note: If the appliance was disconnected from the power
supply for a prolonged period, the time starts at 12:00
o’clock. Set the time.
10
Switching on the appliance for the first time
Getting to know your appliance en
When the dishwasher is switched on for the first time,
you are taken directly to the settings for switching on
the appliance for the first time. The following text is
Change the setting as follows:
1. Keep pressing button > )* until the required setting
is displayed.
indicated on the display window at the top @:
2. Make the setting with setting buttons + - X.
Scroll with < >
Set with - +
Leave with Setup 3 sec.
3. Press and hold the Info button {8 for 3 seconds.
The chosen setting has now been stored.
The required settings for switching on the appliance for
the first time are listed in the table below.
Settings
Switching on the appliance for
Factory settingInfotext
by pressing Info button {
the first time
LanguageDeutschLanguage selection.
Time format24h12h or 24h.
Time setting12:00Set the current time.
Water hardness°E 16 - 20 mediumSetting water hardness. When using
Multitabs, select the lowest setting.
Rinse aid disp.Setting 5Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Water connection *Cold waterConnection to hot water (40-60°C) or cold
water (<40°C) possible.
* depending on the features of your dishwasher
--------
11
en Getting to know your appliance
Settings
The dishwasher has been preset with certain settings
for your convenience. You can change this factory
setting.
Change the setting as follows:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Press Info button { 8 for 3 seconds until the
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4. Keep pressing button > )* until the required setting
is displayed.
5. Make the setting with setting buttons + - X.
6. Press and hold the Info button {8 for 3 seconds.
The chosen setting has now been stored.
You have the option of resetting all changed settings
back to the original factory settings.
Note: When you reset your dishwasher to the factory
settings, you are taken directly to the settings for
switching on the appliance for the first time.
SettingFactory settingInfotext
by pressing Info button {
Time setting12:00Set the current time.
Time format24h12h or 24h.
Time displayTimeShow end of programme with display "Finish
in" or "Finish at".
LanguageDeutschLanguage selection.
Water hardness°E 16 - 20 mediumSetting water hardness. When using
Multitabs, select the lowest setting.
Rinse aid disp.Level 5Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Sensor settingStandardAdjustment of soiling detection for optimum
cleaning result.
Extra dryOffImproved drying for glasses and
plasticware.
Water connection *Cold waterConnection to hot water (40-60°C) or cold
water (<40°C) possible.
Eco forecastOffShow the water and energy consumption.
Auto Power Offafter 1 min.Appliance automatically switches off at end
of rinsing process.
Emotion Light *OnInterior light.
Front display *OnThe front display can be selected.
Remaining time proj. *OnWhile programme is running, status
information is projected onto floor.
Infolight *OnLight is projected to signal an active
cleaning cycle.
Start programmeEco 50° CWhen switching on, the last selected
programme appears.
Tone volume *Level 2Volume of signal at end of programme.
Eco drying *OnDoor opens automatically at the end of the
programme.
GreetingOnWhen switching on the appliance, the brand
logo can be deselected.
Factory settingResetResetting to the factory setting.
* depending on the features of your dishwasher
--------
13
en Water softening system / special salt
Water softening system / special salt
Water softening system / special salt
To ensure good rinsing results, the dishwasher
requires soft water, i.e. water which is low in lime,
otherwise limescale will be deposited on the utensils
and interior container. Tap water above 7° dH
(1.2 mmol/l) must be softened. The water is softened
with special salt (regeneration salt) in the water
softening system of the dishwasher. The setting and
therefore the required amount of salt depends on the
degree of hardness of your tap water (see following
water hardness table).
Water hardness table
:DWHU
KDUGQHVV
YDOXH(
Ȣ
Ȣ
+DUGQHVV
UDQJH
VRIW
VRIW
PPROO
Ȣ
Ȣ
6HWYDOXH
RQWKH
PDFKLQH
Adjusting the water softening system
The amount of salt dispensed can be set from 0 to 62°E.
Salt is not required at the set value 0-8.
Set the softening system as follows:
1. Ask your local water utility company for the water
hardness value of the tap water.
2. Required setting can be found in the water hardness
table.
3. Open the door.
4. Switch on ON/OFF switch (.
5. Press Info button { 8 for 3 seconds until the
following text is indicated on the display window at
the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
6. Keep pressing button > )* until the water hardness
is indicated on the display window at the top @.
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
PHGLXP
PHGLXP
PHGLXP
KDUG
KDUG
KDUG
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
Ȣ
7. Make the setting with setting buttons + - X.
8. Press and hold the Info button {8 for 3 seconds.
The chosen setting has now been stored.
14
Rinse aid en
Using special salt
As soon as the low salt indicator P is lit on the control
panel or is requested on the front display * ):, salt
should be topped up. Always refill with special salt
immediately before switching on the appliance. This
ensures that overrun special salt solution is immediately
washed out and does not corrode the rinsing tank.
Caution!
Detergent will destroy the water softening system! Never
pour detergent into the salt dispenser.
Top up the salt as follows:
1. Undo the screw plug on the dispenser 1R.
2. Fill the dispenser with water (required only when
switching on the appliance for the first time).
3. Add salt as illustrated (do not use table salt or tablets).
The water is displaced and runs out.
Rinse aid
Rinse aid
As soon as the low rinse-aid indicator H is lit on the
control panel or is requested on the front display * ):,
rinse-aid should be topped up. The rinse aid is required
for stain-free utensils and clear glasses. Use only rinse
aid for domestic dishwashers. Combined detergents
with rinse-aid component may be used up to a water
hardness of 21° dH (37° fH, 26° Clarke, 3.7 mmol/l)
only. If the water hardness is over 21° dH, rinse-aid
must be used.
* depending on the features of your dishwasher
Top up the rinse-aid as follows:
1. Open dispenser 9"; press lug on the lid (1) and lift
(2).
* depending on the features of your dishwasher
Using detergents with salt component
Detergent with a salt component
If combined detergents with a salt component
are used, special salt can usually be omitted up
to a water hardness of 21° dH (37° fH, 26° Clarke,
3.7 mmol/l). If the water hardness is over 21° dH, salt
must be used.
Switching off low salt indicator / water
softening system
Switching off water softening system
If the use of combined detergents with a salt
component impairs the low salt indicator P on the
control panel or the text on the display window at the
top @ (enough salt for x rinse cycles), the displays
can be switched off.
2. Add rinse-aid up to the max. mark.
PD[
3. Close the lid.
Lid “clicks” into position.
4. Remove overflowed rinse aid with a cloth.
This prevents excessive frothing during the next rinse
cycle.
Proceed as described under “Setting water softening
system” and set the value to 0-8. The water softening
system and salt refill indicator are now switched off.
15
Loading...
+ 33 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.