AR 400 742
Metal housing
600 CFM
Inside installation
Air extraction
Installation accessories
Part# 653556
Additional ø 6" connection piece
Required when installing up to 3 or
4 VL 414 downdraft with AR 400
inline blower.
400 series inline blower
AR 400
– Powerful blower for combination
with 400 series ventilation
systems such as AL 400
retractable downdraft, VL 414
downdraft and AW/AI 442
professional wall/island hood.
– Quiet blower with high-efficiency
BLDC technology.
Output
3 performance output levels and
intensive mode: Sound power and
sound pressure depending on
built-in situation.
Air extraction: 600 CFM.
Power levels depend on the
ventilation system.
Features
3 electronically controlled power
levels and one intensive mode.
Blower technology with highly
Metal housing, zinc-plated.
Duct connection pieces on air intake
side: 1 x ø 6" round, 4 x ø 6" round.
Duct connection piece on air output
side: 1 x ø 6" round.
Spare cover to close an air intake
included with the blower.
Retaining bracket for ceiling
installation or installation on the inner
side of a cabinetry comes included
with the blower.
2 connecting pieces included
Additional connection piece must be ordered serarately.
Part #653556
Planning notes
AR 400 742 inline blower can
only be combined with 400
series ventilation systems such
as AL 400 retractable downdraft,
VL 414 downdraft and AW/AI 442
professional wall/island hood.
Connection to the respective
appliances via network cable.
Installation in the base cabinet:
possible in areas with two cabinet
drawers or on the floor with a cutout in the base cabinet. Panel-free
toe-kick possible.
Installation in a separate room, attic
or crawl space allows for a reduced
noise level in the kitchen.
For installation in the basement/
crawl space or an adjacent room,
refer to the planning information
section for 400 series Ventilation
systems on page xx.
When installing a ventilation
hood with air extraction mode
and a chimney-vented fireplace,
the power supply line of the
ventilation appliance needs a
suitable safety switch.
Rating
Total rating: 210 W.
Total Amps: 2 A.
120 V / 60 Hz
Connecting cable not included. Hard
wire required.
16' network cable included.
Numbers indicated
inside parenthesis ( ) = mm