Gaggenau AL400-191 Specifications Sheet
Color Variants
AL400191
Stainless steel
Width 90 cm
Optional accessories
AA400510
Window contact switch
Required installation accessories
AD754045
Connection piece for 2 aluflex pipes DN
150 round
AD854043
AD854045
Connecting piece for 2 flat ducts DN
150
Installation Accessories
AA010410
Air exhaust grille air recirculation
AA409401
Furniture support for table ventilation
AL 400 90 cm
AD704048
Air collector box DN 150 round pipe
AD704049
Air collector box DN 150 flat duct
Characteristics
Product name/family
Color chimney
Typology
Traditional
Approval certificates
Australia Standards, CE, Eurasian, GMark, VDE
Length electrical supply cord (cm)
170
Required niche size for installation
(HxWxD)
540mm x 840mm x 122mm
Height of the chimney (mm)
Height of product, without chimney
(mm)
540
Net weight (kg)
34.0
Type of control
Electronic
Number of speed settings
Maximum output air extraction (m3/h)
650
Boost position output recirculating
(m3/h)
Maximum output recirculating air (m3/
h)
530
Boost position air extraction (m³/h)
Number of lights
4
Noise level (dB)
61
Diameter of air outlet (mm)
Grease filter material
Washable stainless steel
Odour filter
No
Operating Mode
Convertible
Delay Shut off modes
6M
Required accessories
Blower
Optional accessories
AA400510
Type of lamps used
LED
Total power of the lamps (W)
20
Grease filter type
Kassette
Clean filter reminders
Consumption and connection features
Connection Rating (W)
65
Current (A)
10
Voltage (V)
230
Frequency (Hz)
50; 60
Plug type
CH plug w/ earthing, Gardy plug w/
earthing, GB plug
Installation typology
Built-in
Universal Product Code
825225913696
Material body
Stainless steel
Approval certificates
Australia Standards, CE, Eurasian, GMark, VDE
Length of electrical supply cord (in)
Plug type
CH plug w/ earthing, Gardy plug w/
earthing, GB plug
Dimensions of the product, with
chimney (if exists) (in)
/ x x
Dimensions of the packed product (in)
14.96 x 24.99 x 40.55
Height of the chimney (in)
Vertical rise height
Required distance above cooktop/
ranges
Net weight (lbs)
75
AL400191
Table ventilation 400 series
Stainless steel
Width 90 cm
Air extraction / Air recirculation
Motorless
Extendable table ventilation, when
not in use can be completely lowered
into the worktop
Can be combined perfectly with other
Vario appliances of the 400 series
Dimmable, neutral white surface
LED light for ideal illumination of the
whole cooktop
Precision crafting of 3 mm stainless
steel
For surface mounting with a visible
edge or for flush mounting
Motorless, can be combined with
Gaggenau BLDC remote fan units
Output
Power levels depend on the remote fan
unit, see table on page XX.
Features
3 electronically controlled power levels
and 1 intensive mode.
Interval ventilation, 6 min.
Run-on function, 6 min.
Grease filter saturation indicator.
Cartridge-type filter, dishwasher-safe.
Neutral white surface LED light (3600
K), continuously dimmable.
Lamp output 4 x 5 W.
Illuminance 191 lx.
Spare covers for closing air outlets.
No connecting piece included.
Consumption data
Consumption data is referred to a
configuration with the remote fan unit
AR400142.
Energy efficiency class A at a range of
energy efficiency classes from A++ to
E.
Energy consumption 49 kwh/year.
Ventilation efficiency class A.
Ilumination efficiency class E.
Grease filter efficiency class C.
Sound level min. 45 dB / max. 61 dB
normal mode.
Planning notes
Refer to the table on page XX for
the matching remote fan units for air
recirculation or air extraction mode.
Secure the control unit to the side
panel of the cabinet, not to the base of
the cabinet or the kitchen floor.
Connection to the respective
appliances via network cable.
For operation with 2 appliances 400
series or a cooktop configuration of up
to 92 cm wide.
Operation of Vario cooking appliances
only possible without appliance cover.
Max. output of cooktops 18 kW.
In combination with the cooktop CI 290,
installation in 60 cm deep worktops is
possible.
If the remote fan unit is installed within
the bottom cabinet and if combined
with VK or VF ensure accessibility to the
outlets.
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must
be observed. Concerning other
materials please consult the worktop
manufacturer.
The remaining surface of the worktop
(min. 50 mm) between the cut-outs
must be reinforced with a support. It is
recommended to use furniture support
AA 409 401/431.
Ovens that do not exceed the maximum
allowed cabinet temperature can be
combined with the table ventilation if
built-in situation permits.
To avoid smoke when frying/grilling
refer to the manuals of VR/VP.
When installing a ventilation hood with
air extraction mode and a chimneyvented fireplace, the power supply line
of the ventilation appliance needs a
suitable safety switch.
Connection
Total connected load 65 W.
Connecting cable 1.7 m, pluggable.
Network cable 1.2 m.
AL400191
Table ventilation 400 series
Stainless steel
Width 90 cm
Air extraction / Air recirculation
Motorless
2018-03-13
Page 2
Loading...