Fusion MS-WR80 User Manual

Specifications and design are subject to change without notice.

PUBLISHED BY FUSION ELECTRONICS LIMITED:

© Copyright 2010 by FUSION Electronics Limited.

All rights reserved. Specifications and design are

subject to change without notice. v1.0

YOU CAN HELP PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations:
Hand in the non-working electrical equipment
to an appropriate waste disposal center.

User / Installation Manual

Marine Wired Remote

MS-WR80

Compatible with FUSION Electronics MS-CD60 and MS-CD80 Marine CD/MP3 Receivers only.

Button Description

Installation

001

BUTTON DESCRIPTION

1. POWER.

Press to power on/off

2. MODE/ SUB.W BUTTON.
Press the Mode button to cycle through the

source modes. Only active modes will be
displayed. Eg. If there is no CD loaded CD mode
will not be selectable. Press and hold the
MODE/SUB.W button to activate the Subwoofer
line out and repeat to deactivate.

3. MUTE.

Press to mute audio.

4. BAND/LOUD/ENTER.

Press the BAND button to cycle through and
select the desired band

FM 1 FM 2 FM 3 AM

Press and hold the LOUD button to reinforce the
Bass output, press again to cancel.
Press the ENT button in MP3 Mode to confirm
selection.

NB: For more detailed information on functions please
consult your MS-CD60 or MS-CD80 Manual.

RECORD YOUR PRODUCT DETAILS HERE:

Model Number

Date Of Purchase

Affix Receipt Here

5. TUN/TRK

In Radio mode - Button 5 is used to select
stations.
Press to activate Automatic Seek up or down
the frequency spectrum.
Press and hold to activate manual search.
Manual will be displayed, if neither button has
been pressed for several seconds the unit will
return to seek tuning mode.
In CD/iPod/USB mode - Press to FAST FORWARD
or REWIND tracks.

6. VOLUME

Increase/decrease volume level button.

7. AS/PS / iPod / MENU

In Radio mode - Press to scan for available
stations.
Press while in MP3 Mode to display the
directories/folders and navigate via the
Vol up/down button (6)
In iPod mode - Press to display the current
directory in the iPod for selection.

8. LCD DISPLAY

88.00

1

WALL

2

1. M4 X 50MM MOUNTING SCREWS

2. MOUNTING BRACKET

3. M4 NUTS X 2

1. CUT THE APPROPRIATE SIZE MOUNTING HOLE IN
THE PANEL.

2. INSERT THE BASE INTO THE MOUNTING HOLE AND
ATTACH THE MOUNTING BRACKET.

3. PLACE THE REMOTE IN THE BASE AND TURN
CLOCKWISE TO LOCK IN PLACE.

3

002

INSTALLATION