Fusion MS-WR600 User Manual

USER / INSTALLATION MANUAL

Marine Wired Remote Control

MS-WR600C

www.fusionelectronics.com

FUSION Electronics New Zealand Ph: [phone]
FUSION Electronics Australia Ph: [phone]
FUSION Electronics Europe Ph: [phone]
FUSION Electronics USA Ph: [phone]

PUBLISHED BY FUSION ELECTRONICS LIMITED:
©Copyright 2010 by FUSION Electronics Limited. All rights reserved.
Specifications and design are subject to change without notice.

YOU CAN HELP PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations: Hand in the non­working electrical equipment to an appropriate waste disposal center.

Compatible with MS-CD600, MS-AV600, MS-IP600 and MS-RA200

Button Description

Installation

POWER

Press to turn the unit ON/OFF.

SOURCE

Press to select the desired source.
Radio (FM-AM-SIRIUS) - DVD/CD/MP3 - iPod - AUX
(SIRIUS - USA only)

MUTE
Short Press

Press to Mute/Un-Mute sound in all zones.

Press and Hold

To enter configuration menu.

MENU

Press to enter menu system. Press to
return to previous screen.

PLAY/PAUSE

Play/Pause track in DVD/CD/MP3 and iPod mode.
MS-RA200 only - Press to cycle tuner
station search. Manual/Auto/Preset

ROTARY ENCODER
Turn

To adjust volume, move up or down a menu
structure, or adjust a specific setting item.

Press

To select a highlighted option, confirm a setting.

BACK/PREVIOUS
Short Press

DVD/CD/MP3/iPod - Select the previous
track.
AM/FM/Sirius - Start tuning down the
frequency spectrum. (Auto/Manual tuning
mode) or previous preset (Preset mode).

Press and Hold

DVD/CD/MP3/iPod - Rewind the current track.

FORWARD/NEXT
Short Press

DVD/CD/MP3/iPod - Select the next track.
AM/FM/Sirius - Start tuning up the
frequency spectrum. (Auto/Manual tuning
mode) or next preset (Preset mode).

Press and Hold

DVD/CD/MP3/iPod - Fast forward the current
track.

To complete the ultimate marine audio experience, a
total of three MS-WR600 Marine Wired Remote Controls
can be installed in various locations, creating a flexible
zone control solution throughout a vessel.
The MS-WR600 is a plug and play device. Connect to the
CANbus cable connection on your FUSION Marine Stereo.
Please refer to the MS-CD600/MS-AV600/MS-IP600/
MS-RA200 Marine Stereo manual for further detailed
operation instructions.

OPTION 1

OPTION 2

TERMINATOR

PLUG

MS-WR600Y

Option 1: Recommended installation.
Option 2: Requires a Y Splitter Cable (MS-WR600Y, sold

separately). Cables from the splitter (*) to each remote
must be of equal length to ensure correct operation.

Note: The supplied ‘Terminator Plug’ must be fixed to

the last remote. Failure to do so could effect operation.

Optional Accessory: MS-WR600EXT6 - 6m extension lead.

MS-WR600Y - Y Splitter Cable

TERMINATOR

PLUG

**

TERMINATOR
PLUG

Operation

ASSIGNING THE REMOTE TO A ZONE

Press and hold the ‘Mute’ button for 5-6 seconds.
Select ‘Assign Zone’. Select zone to allocate remote too.
(Zone 1, Zone 2, Zone 3, Zone 123).
Press the ‘Menu’ button to exit.

Note: The MS-RA200 is a 2 Zone Marine Stereo, Zone 3

is not available.

SUB LIMIT

Press the ‘Menu’ button and select ‘Sub Limit’.
Turn the ‘Rotary Encoder’ to adjust level. Press the
‘Menu’ button to exit.

ZONE VOLUME

Turn the ‘Rotary Encoder’ to adjust the volume in the
assigned zone.

BACKLIGHT BRIGHTNESS

Press and hold the ‘Menu’ button while turning the
‘Rotary Encoder’ to adjust.

Standby Mode

After a period of inactivity the remote enters standby
mode, reducing the backlight brightness. (Default)
To switch the backlight off in standby mode (Power save),
press and hold the ‘Mute’ button for 5-6 seconds. Select
‘Backlight’. Select ‘Off’. Press the ‘Menu’ button to exit.

Note: The remote should be

45˚

mounted on no more than a 45˚
angle from the verticle plane.

RECORD YOUR PRODUCT DETAILS HERE:

Model Number
Date Of Purchase

Affix Receipt Here