Furuno GP-7000 User Manual 2

COLOR GPS/PLOTTER GP-7000

Operator’s Guide

The purpose of this Operator's Guide is to provide basic operating procedures for this
equipment. For more detailed information see the Operator's Manual.

RANGE key
Changes the range.

-: Shrinks the scale, and expands image.
+: Expands the scale, and shrinks image.

Cursor pad

Moves the cursor.

Soft keys

Change function according to screen
in use.

(Hard keys)

Key name Function

MENU key Shows/hides the menu bar.
DISP key Shows/hides DISPLAY MODE menu.
MOB/WPT key Short press: Enters a waypoint. Long press: Enters the MOB mark.
TLL/GOTO key Sets the waypoint or route as destination.
ROUTE key Creates the route.
CLEAR key Silences the audible alarm; erases the various windows one by one.

POWER/BRILL key

Long press: Turns power off.
Short press: Turns power on. Shows the BACKLIGHT window.

Card slots

Drive for chart/memory cards.

Hard keys

See below.

ENTER knob

Rotation: Selects
menu items.
Push: Confirms entry.

Own ship
mark

Cursor

Plotter display

Nav data

Returning Own Ship to Screen
Center

Press the CENTER soft key.

Adjusting Brilliance

1. Press the BRILL key to show the
BACKLIGHT window.

2. Rotate the ENTER knob to adjust the
brilliance.

3. Push the ENTER knob to close the
window.

Entering Waypoints

1. Operate the cursor pad to place the
cursor at the position desired.

2. Press the MOB/WPT key. Finally, press
the SAVE soft key.

Entering Routes

1. Operate the cursor pad to place the
cursor at the position desired.

2. Press the ROUTE key, and then press
the SAVE soft key.

3. Repeat steps 1 and 2 to complete the
route.

Setting Destination

Operate the cursor pad to place the cursor
on the waypoint you want to go, and then
press the GOTO key.

Setting A rrival A larm

1. Press the MENU key.

2. Choose ALARMS from the menu bar,
and then push the ENTER knob.

3. Choose ARRIVAL ALAR M and then
push the ENTER knob.

4. Rotate the ENTER knob to choose the
value, and then push it.

5. Enter the alarm range and then press
the SAVE soft key.

PUB.NO.OSE-44290-A1

(0409,HIMA) GP-7000

2