GPS NAVIGATOR
English
How to operate the main menu
Model
GP-170
Operator's Guide
The purpose of this guide is to provide the
basic operation for this equipment. For more
detailed information, see the Operator's Manual.
All brand and product names are trademarks,
registered trademarks or service marks of their
respective holders.
MENU
ESC
NU/CU
DISPLAY
then
OR
1
~
CENTER
8
ENT
Press appropriate numeric key.
How to switch the
operation mode
NU/CU
ENT
NU: North up
CU: Course up
Goes back
one layer in
multi-layer
Shifts display or cursor.
menu.
How to adjust the brilliance of the display and panel
Display brilliance
BRILL
Panel brilliance
If needed, repeat one of these steps.
Select the menu item.
Goes forward to one
layer in multi-layer menu.
MENU
ESC
OR
ZOOM
OUT
NU/CU
ENT
9
(numeric key)
MENU
ESC
CURSOR
ON/OFF
0
then
~
How to open the context menu
For example, context menu for a mark.
Select a mark with the cursorpad.
How to open the list
LIST
Mark List Route List Station List
LIST
How to turn the
power on/off
LIST
(Requires internal beacon receiver.)
ROUTE
: Create a new route.
2
GO TO
: Set a destination.
3
ACK
DELETE
CURSOR
ON/OFF
0
CURSOR
ON/OFF
CURSOR
ON/OFF
- Acknowledges an unacknowledged alert.
- Deletes all setting values on the setting window.
- Deletes registered data at the cursor-selected position.
ZOOM
to
OUT
: Turn the cursor on/off.
0
0
- Selects and confirms the menu item.
9
- Enters a numeric character.
Cursor on: Large Cursor on: Small
(Size selectable from menu.)
ROUTE
2
Long press
Select the location for a route point.
Repeat these steps to complete the route.
MOB
: Set MOB as destination.
4
MOB
4
PLOT
: Plot and record ship’s track.
ON/OFF
6
PLOT
ON/OFF
The pop-up message “Resuming
6
Track Plot” appears.
To stop plotting,
PLOT
ON/OFF
ZOOM
IN
The pop-up message “Stopping
6
Track Plot” appears.
ZOOM
7
: Zoom in/out the display.
9
OUT
Zoom in Zoom out
ZOOM
IN
7
ZOOM
OUT
9
NU/CU
ENT
Select [1 Yes].
ROUTE
2
Select the location
for a destination.
MARK
: Put a mark.
EVENT
5
With cursor on
Select the location for a mark.
With cursor off
MARK
EVENT
CENTER
The mark is put at own ship’s position.
5
: Center the cursor position or own ship’s position.
8
With cursor on
CENTER
Center the cursor position.
8
With cursor off
Center own ship’s position.
MARK
EVENT
GO TO
3
5
DISPLAY
: Select the display mode.
1
Plotter
DISPLAY
Integrity
1
DISPLAY
1
Highway
DISPLAY
Course
1
DISPLAY
1
Data
DISPLAY
1
PUB. NO. OSE-44820-A
(1406, YOTA) GP-170
00017791110