COLOR DGPS/PLOTTER GP-1650D
COLOR GPS/PLOTTER GP-1650
Operator’s Guide
The purpose of this operator's guide is to provide the basic operating procedures for this equipment.
For detailed information, refer to the operator's manual.
Turning the Power On/Off
Press and hold down the [POWER/BRILL]
switch.
Adjusting Tone and
Brilliance
1. Press the [POWER/BRILL] key with a touchand-release action.
2. Press the appropriate soft key or cursor pad
to adjust.
Displaying Electronic
Chart at Power Up
Insert mini chart card in slot and turn on the
power.
Selecting Nav Data
Displays
Press the soft key NAV L/L (WPT, S/C).
Changing Chart Scale
Press the soft key [ZOOM IN] to enlarge;
[ZOOM OUT] to shrink.
Turning the Cursor On/Off
Cursor On: Operate the cursor pad.
Cursor Off: Press the soft key [CENTER].
Shifting the Cursor
Operate the cursor pad.
Shifting the Display
Press and hold down the cursor pad.
Returning Own Ship to
Screen Center
Press the soft key CENTER.
Changing the Plot Interval
1. Press the [MENU] key to show the main
menu.
2. Press the soft key CHART SETUP OPTIONS
to show the chart setup options menu.
3. Press the soft key TRACK CONTROL.
4. Press ▲ or ▼ to select TIME INTERVAL or
DIST INTERVAL.
5. Press the soft key EDIT.
6. Key in the interval desired.
Entering Mark
1. Press the [MENU] key and the soft key DISPLAY OPTIONS.
2. Press ▼ to select OPERATION MODE.
3. Press the soft key EDIT.
4. Press ▼ to select FISHING.
5. Press the soft key ENTER or the [ENTER]
key.
6. Press the PLOT key to display the plotter
display.
7. Press the [HIDE/SHOW] key to display the
soft key MARK ENTRY.
8. Press the soft key MARK ENTRY.
When the cursor is displayed, a mark which its
shape and color are presetted is entered to
cursor position. When the cursor is not displayed, a mark is entered to own ship
position.The mark attributes can be changed
by the soft key MARK EDIT.
4. Operate the cursor to place the cursor on
the position you want to enter the waypoint.
5. Press the soft key NEW WPT.
6. Press the soft key SAVE.
Registering Routes
1. Press the [WPT/RTE] key.
2. Press the soft key ROUTES.
3. Press the soft key NEW ROUTE.
4. Press the soft key LOCAL LIST or ALPHA
LIST.
5. Press ▲ or ▼ to select a waypoint.
6. Press the soft key ADD WPT.
7. Repeat step 5-7.
8. Press the soft key SAVE.
Setting Destination by
Waypoint Number
Stopping, Restarting
Recording of Track
1. Press the [MENU] key.
2. Press the soft key CHART SETUP OPTIONS.
3. Press the soft key TRACK CONTROL.
4. Press the soft key STOP TRACK. NOT
TRACKING indication appears at the bottom
of the display.
To restart recording, press the soft key START
TRACK.
Entering Waypoints at
Own Ship Position
Press the [SAVE/MOB] key with a touch-andrelease action.
Entering Waypoints By
Cursor
1. Press the [WPT/RTE] key.
2. Press the soft key WAYPOINTS.
3. Press the soft key WA YPOINT BY CURSOR
to show the plotter display.
PUB.NO.OSE-43940-E
(0005,TATA) GP-1650/1650D
1. Place the cursor on the waypoint you want
to go on the plotter display.
2. Press the soft key GO TO WPT.
Cancelling Destination
1. Press the [WPT/RTE] key.
2. Press the soft key LOG.
3. Press ▲ or ▼ to select the waypoint desired.
4. Press the soft key STOP.
5. Press the [ENTER] key to select YES on the
confirmation window.
6. Press the soft key RELEASE to show the
confirmation window.
7. Press the [ENTER] key to select YES.
Setting Arrival Alarm
1. Press the [ALARM] key to show the alarm
menu.
2. Select ARRIVAL ALARM.
3. Press the soft key EDIT.
4. Press ▲ or ▼ to select ON.
5. Key in the alarm range.
6. Press the soft key ENTER.
Silencing audible alarm: [CLEAR] key.
Disabling alarm: Select OFF at step 3 above.