Furuno FCV-1200BB User Manual

Dual Frequency, High Definition
B l a c k Box Video Sounder
Models F C V- 1 2 0 0 B B
Furuno Free Synthesizer (FFS) Transceiver
design allows use of the following User­Selectable operating frequencies (15/28/38/50/88/107/200 kHz)
Select virtually any size non-interlaced,
FFS Transceiver provides future expansion
capabilities and convenient retrofit of exist­ing echo sounder systems using existing transducers
Software programmable selection of dis-
play aspect ratio; Portrait (vertical) or Landscape (horizontal)
Unique split range control allows inde-
pendent range settings in dual-frequency mode
Alarms for water depth, fish echoes and
water temperature
Shared monitor utilization of Radar and
PC systems with standard PC monitor switching system
“All Glass”, balanced and symmetrical
bridge layout when multiple equivalent PC monitors are employed
Sounder video distribution to a vessel’s tel-
evision system, or multiple external moni­tors is possible with standard PC monitor converters and distributors
Max phased range of 1200 ft. at
1, 2 or 3 kW RMS Output
Displays echoes in 8 or 16 colors
Selectable background colors including
light blue, blue, black or white
SPECIFICATIONS OF FCV-1200BB
1. Non-Interlaced, Multisync PC Monitor (Owner Supplied)
Virtually any size including, 15", 17", 20", 21" and 28" CRTs, as well as Flat Panel LCDs (VGA640 x 480 or higher)
2. Display Modes Single (LF or HF), Dual, Triple Zoom, Bottom-lock
Expansion, Mix and A-scope
3. Basic Ranges Any ranges customized between 5-2000 m
Foot, Fathom Passi/Braza may be selected
Marker Zoom/Bottom-lock Expansion Ranges:
5-200 m
Range Phasing: Up to 4000 m (Max depth: 2000 m) Zoom Ranges: 5-200 m (preset on menu)
4. Pulselength and Pulse Repetition Rate
0.2-5.0 ms, 20-3000 pulses/min
5. Picture Advance 0, 1/16, 1/8, 1/4, 1/2, 1 or 2 lines/tx
6. Data Interface (NMEA0183 Ver. 1.5 or 2.0; Any talker)
Inputs: GGA, GLC, GLL, GTD, MTW, RMA, RMC, VTG Outputs: SDDBS, SDDBT, SDDPT, SDTLL, YCMTW*
*Optional sensor required Depth data of fishing gear and water temperature using a FURUNO Net Sounder.
7. Alarms Audio-visual alarms for water depth, fish echoes
and water temperature*
*Optional sensor required
8. Other Features Automatic bottom tracking, Interference rejecter,
Threshold, Water temperature graph*, Picture
memory/recall
*Optional sensor required
9. TX Output Power
1, 2 or 3 kW RMS (depending on transducer types)
10. Operating Frequencies
The synthesized transceiver works with two frequencies
from 10 to 200 kHz. Specify transducer type when
ordering for 15/28/38/50/88/107 or 200 kHz.
FLEXIBLE SCREEN LAYOUTS
The screen presents a choice of single, double or triple pictures on a horizon­tally split screen or vertically split screen. Frequently used picture layouts can be preset as one of the display modes. In the dual-frequency mode,the split range feature is available
- echograms in different depth segments by high and low fre­quencies are visible side by side.
PROCESSOR UNIT
POWER SUPPLY
12-32 VDC, 120 W max. 115/230 VAC with optional rectifier
ENVIRONMENTAL CONDITIONS (IEC 60945 TESTING)
Display Unit: -15˚C to +55˚C Water Resistance: IEC IPX5
EQUIPMENT LIST
Standard
1. Control Unit CV-1201 1 Unit
2. Processor Unit CV-1203 1 Unit
3. Installation materials and standard spare parts 1 Set
4. Interface box IF-8000 1 Unit
Optional
1. Non-Interlaced, Multi-sync PC Monitor (SXGA1280 x 1024)
2. Temperature sensor T-02MSB (thru-hull bronze), T-02MTB (transom bronze), T-03MSB (thru-hull bronze detachable)
3. Rectifier RU-1746B-2
4. EX-IF Board with connector
5. Transducer switch box EX-7
6. Data Recorder MT-12 (EX-7 required)
7. Echo sounder interface VI-1100A
8. External Transceiver ETR-5D/10D
9. Transducer (Specify the frequency and type of transducer) 1 kW: 15F-4S (15 kHz), 28F-8 (28 kHz), 50B-6/6B (50 kHz)
50B/9/9B (50 kHz), 50F-8G (50 kHz), 88B-8 (88 kHz), 200B-5S (200 kHz)
2 kW: 15F-10 (15 kHz), 28F-18 (28 kHz), 50B-12 (50 kHz),
88B-10 (88 kHz), 200B-8/8 (200 kHz), 200B-8N (200 kHz)
3 kW: 15F-10 x 2 (15 kHz), 28F-24H (28 kHz), 50F-24H (50 kHz),
88F-126H (88 kHz), 100B-10R (107 kHz), 200B-12H (200 kHz)
INTERCONNECTION DIAGRAM
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Loading...