Furuno CA50-200TID-R99 Brochure

R99

R99

R99

• The top performer in Airmar’s professional line
of fishfinder transducers for vessels 30’ and up

• Streamlined shape with included fairing provides
excellent performance at speeds even over 30 knots

• Exposed temperature sensor provides fast,
accurate responses

• Interfaces to Furuno FCV1100, FCV1200 and BBFF3

• Includes a unique stuffing tube that seals the hull
to form a water tight conduit for the cable

Dual Frequency

50kHz & 200kHz

2kW Transducer

Performance that
redefines fishfinding

The new R99 is a fish’s worst enemy. Why? The R99
is

so precise

, fish are no longer camouflaged by their
surroundings. Down deep near the bottom– you’ll
detect them. Away from the bottom– fish don’t have
a fighting chance. With fifteen 50kHz elements in its
arsenal, the R99 is the

find

in

fishfinder

.

The New Benchmark for
High-Powered Performance!

The new R99 is a 2kW powerhouse. Packed with
an array of fifteen 50kHz elements and an 88mm
200kHz narrow beam element, the performance is
4 times that of a B260 transducer. The R99’s streamlined
shape maintains noise free accurate readings at speeds
over 30 knots. Add a high precision temperature
sensor, and the R99 has rewritten the record book.

See the difference!

To the right, the display screen shows exactly
why the R99 is clearly the best choice for the
serious sport fisherman!

Raising the Bar in
the Fishfinding Arena!

R99, showing
the high speed
fairing

Furuno model
#CA50/200T-R99

R99

Performance Comparison

The table below compares the performance of the single element
B744V, the four element B256, the seven element B260 and the R99

R99

Dimensions

R99 vs. B260:

• Beam widths are narrower, concentrating
energy for better target detection and
bottom detail.

• Figure of merit is 6 dB higher at 50 kHz
and 200kHz, as compared to the B260.
This is equivalent to 4 times the sensitivity
at each frequency.

• The Q at both 50 kHz and 200 kHz is
significantly reduced, which means even
much lower ringing and even better
discrimination between closely spaced fish
and between fish and bottom.

Performance Specs

The diagram shows
the connectivity.

Sounder

Settings:

Sounder 50kHz 200kHz

FCV1100 Tap B Tap C
FCV1200 62V 82V
BBFF3 Tap B Tap D
FCV292 Tap B Tap C