Furuno 1932 User Manual

The FURUNO MODEL 1932 MARK-2 is a remarkable 4 kW radar designed for fishing boats and pleasure craft. Radar images are painted in 8 gradations of green on the daylight bright 10-inch CRT.

The MODEL 1932 MARK-2 has a variety of standard features usually found only in commercial radars like dual EBLs and VRMs, Echo Trails, Guard Zone Alarm*, Off-center and a Watch Mode. Automatic control of

Catalogue No. R-168h

10-INCH DAYLIGHT RADAR

Super clear picture, Easy operation using programmable function keys

MODEL

1932 MARK-2

● 4 kW transmitter output, 16 range

scales, 0.125 - 48nm

● Rugged die-cast, display housing

● 3 data ports

● User-programmable function keys

● Automatic optimization of radar

picture

● Enhanced short range performance

● Cursor position data, tracked target

data* and radar system data output

(*TTM target data output with optional ARP-10)

● Head-up, Course-up, North-up and

True Motion Presentations

● Economy Power Mode, Guard Zone

Alarm* and Watch Mode

● Optional Autoplotter ARP-10**

(10 targets auto/manual acquisition and auto tracking

*US patent No. 5,032,842 **Heading and speed data input required

The future today with FURUNO's electronics technology.

FURUNO ELECTRIC CO., LTD.

9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111 Fax: +81 (0)798 65-4200, 66-4622 URL: www.furuno.co.jp

Tracked target

Target data

Autoplotter ARP-10 (option)

Optional Autoplotter ARP-10 acquires 5 targets automatically plus 5 targets manually, or 10 targets manually. All acquired targets are automatically tracked with numerical displays of range/bearing, speed/course, closest point of approach (CPA), time to CPA (TCPA) of an operator selected target. The Autoplotter greatly reduces the navigator's workload and enhances normal radar navigation.

(Heading and speed data input required)

receiver tuning and anti-clutter ensures optimum system performance, target detection and simplified radar operation.

The Guard Zone Alarm* generates audio and visual alarms when a target enters a user-defined area. This alarm system can be switched to the Anchor Watch Mode, where an alarm is generated when a target leaves the area. The Economy Mode feature reduces power consumption during stand-by.

When connected with appropriate nav sensors outputting data in NMEA 0183 format, the MODEL 1932 MARK-2 can display the following information: ship's position in L/L or Loran-C TDs, cursor position readout in L/L, ship's speed, course and range/bearing to the targeted waypoint, XTE, EBL readout in true bearing and a Lollipop waypoint mark. In addition, you can select North-up, Course-up and True Motion presentations as well as Head-up. The cursor target L/L (TLL) and radar system data (RSD) can be output in NMEA 0183 format to a compatible video plotter or computer. A tracked target message (TTM) can also be output from the optional ARP-10.

NOW 4 KW !

SPECIFICATIONS OF MODEL 1932 MARK-2

04123KS Printed in Japan

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

6. Autoplotter ARP-10 (Internal option) For 24 rpm type only

Acquisition: 5 auto + 5 manual, or 10 manual Tracking: Auto Display: Speed, course, Range/bearing and CPA/TCPA

(Heading data in AD-10 format and speed data inputs required)

ENVIRONMENT (IEC60945 test method)

Temperature: -15°C to +55°C (Display Unit)

-25°C to +70°C (Antenna Unit)

Waterproofing: IEC 60529 IPX5, USCG CFR-46 (Display Unit)

IEC 60529 IPX6 (Antenna Unit)

POWER SUPPLY

● 10.8 - 41.6 VDC, 65 W (24 rpm), 67 W (48 rpm)

● 115/230 VAC with optional rectifier RU-3423

EQUIPMENT LIST

Standard

1. Display Unit RDP-118 1 unit

2. Antenna Unit (Specify when ordering) 1 unit

● RSB-0070 (24 rpm)

● RSB-0073 (48 rpm)

3. Antenna Cable MJ-B24LPF0005-100/150/200/300 1 pc 10/15/20/30 m

(Specify when ordering)

4. Power Cable (03S9332), 5 m 1 pc

5. Standard Spare Parts and Installation Materials 1 set

Optional

1. Rectifier RU-3423

2. Autoplotter ARP-10 (24 rpm scanner only)

3. Data Cable

MJ-A6SPF0012-050 (5 m), MJ-A6SPF0012-100 (10 m) MJ-A6SPF0009-050 (5 m), MJ-A6SPF0009-100 (10 m) MJ-A6SPF0011-050 (5 m), MJ-A6SPF0011-100 (10 m)

4. Compass Cable MJ-A6SPF0007-100 (10 m)

5. Buzzer OP03-21

6. Display Hood with Lens 03-121-1500

7. Flushmount Kit OP03-145

Antenna Unit

Display Unit

GPS, etc.

Gyro

Rectifier

RU-3423

Heading Sensor

PG-1000

Gyro Converter

AD-100

Remote Display

FMD-811

5 m

10.8 - 41.6 VDC 115/230 VAC

Optional

Buzzer

OP03-21

10 m

5 or 10 m

MJ-A6SPF0007-100

GPS, E/S, etc.

MJ-A6SPF0012-050/100

MJ-A6SPF0009-050/100

MJ-B24LPF0005-100/150/200/300 10/15/20/30 m (specify when ordering)

Antenna cable

Auto Plotter ARP-10

ANTENNA RADIA TOR

1. Type 3.5-ft center-fed waveguide slotted array

2. Rotation Speed 24 / 48 rpm

3. Wind Load Relative wind 100 kt (24 rpm)

Relative wind 70 kt (48 rpm)

4. Beamwidth Hor: 2.4°, Vert: 27°

RF TRANSCEIVER

1. Frequency 9410 ± 30 MHz (X-band)

2. Pulselength & PRR

0.08 µs/2100 Hz (0.125, 0.25, 0.5, 0.75, 1, 1.5* nm)

0.3 µs/1200 Hz (1.5*, 2, 3* nm)

0.8 µs/600 Hz (3*, 4, 6, 8, 12, 24, 16, 36, 48 nm)

* Pulselength & PRR for 1.5 and 3 nm ranges can be selected in menu

3. Peak Output Power 4 kW nominal

4. Mixer, Local Oscillator Microwave Integrated Circuit

5. IF 60 MHz

Bandwidth: 25 MHz (0.08/0.3 µs), 3 MHz (0.8 µs)

6. Noise Figure 6 dB nominal

DISPLAY UNIT

1. Type

10-inch, green phosphor CRT (8-level quantization) 481 (H) x 640 (V) pixels

2. Display Modes

Head-up, Course-up*, North-up*, True Motion**

* Heading input required ** Heading and speed inputs required

3. Range Scales (nm)

Range: .125, .25, .5, .75, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 36, 48 Ring: .0625, .125, .125, .25, .25, .5, .5, 1, 1, 2, 2, 3, 4, 6, 12, 12

4. Echo Trail

Interval: 15, 30 s, 1, 3, 6, 15, 30 min or continuous

5. Interface

(NMEA 0183 format ver 1.5/2.0)

Input

APB, BWC, BWR, DBK, DBS, DBT, DPT, GGA, GLC, GLL, GTD, HDG, HDM, HDT, MDA, MTW, RMA, RMB, RMC, VTG, VHW, XTE

Output:

RATLL, RARSD, RATTM (ARP-10 required)

265 10.4"

302 11.9"

265 10.4"

5-¿7.5

42 1.7"

91 3.6"

250 9.8"

293 11.5"

(35 1.4")(100 3.9") (100 3.9") (35 1.4")

Antenna Unit

Display Unit

22 kg 44.1 lb

8 kg 17.6 lb

1040 41.0"

441 17.4"

355 14.0"

542 21.3"

340 13.4"

250 9.8"

213 8.4"

438 17.2"

Fixing Holes

Bow

(200 7.9'')

Cable Entry

4- 15

FURUNO U.S.A., INC.

Camas, Washington, U.S.A. Phone: +1 360-834-9300 Fax: +1 360-834-9400

FURUNO (UK) LIMITED

Denmead, Hampshire, U.K. Phone: +44 2392-230303 Fax: +44 2392-230101

FURUNO FRANCE S.A.

Bordeaux-Mérignac, France Phone: +33 5 56 13 48 00 Fax: +33 5 56 13 48 01

FURUNO ESPAÑA S.A.

Madrid, Spain Phone: +34 91-725-90-88 Fax: +34 91-725-98-97

FURUNO DANMARK AS

Hvidovre, Denmark Phone: +45 36 77 45 00 Fax: +45 36 77 45 01

FURUNO NORGE A/S

Ålesund, Norway Phone: +47 70 102950 Fax: +47 70 127021

FURUNO SVERIGE AB

Västra Frölunda, Sweden Phone: +46 31-7098940 Fax: +46 31-497093

FURUNO FINLAND OY

Espoo, Finland Phone: +358 9 4355 670 Fax: +358 9 4355 6710

FURUNO POLSKA Sp. Z o.o.

Gdynia, Poland Phone: +48 58 669 02 20 Fax: +48 58 669 02 21