Furrion F30FMP-SY, F30FMP-SS, F20FMP-SS, F20FMP-SY, F15FMP-SY User Manual

Size: A5, 1C printed on woodfree paper

INSTALLATION INSTRUCTIONS

F15FMP-SS / F15FMP-SY / F20FMP-SS /
F20FMP-SY / F30FMP-SS / F30FMP-SY

WIRING INSTRUCTIONS:

• Strip conductor and jacket using strip gage on device

• Loosen Terminal Screws.

• Insert conductors fully into copper terminals as below.

• Take caution that there are no stray wire strands.

• Tighten terminals screws 14~16 in-lbs torque.

• Use copper conductors only

MARKING:

G = Green or Green/Yellow
W = White
X, Y , Z or blank = Other than White or Green or Green/Yellow

DIMENSIONS OF STRIP CONDUCTOR AND JACKET:

The length of strip conductor: 16mm (5/8” Inches)
The length of strip jacket: 40mm (1½” Inches)

EXPLODED VIEW

WARNING:

• For installation by a qualied electrician in accordance with national
and local electrical codes and the following instructions.

• Check that the device’s type and rating are suitable for the application.

• Risk of electric shock. Disconnect power before installing.

• Terminal capacity: 12AWG to 10AWG for 20Amp; 10AWG for 30Amp

IM-FXXFMP-XX REV2.0