1. To turn the unit on/off .
When the unit is power Off, it may be switched On by pressing POWER button.When
the unit is switched On, press and hold POWER button for more than 1 second to
switch the power off.
2. To select function mode
Press INPUTMODE button on the front panel repeatedly to select Tuner,USB(After
inserting a USB storage),BT, F AUX,AV and R AUX mode.
3. To adjust the volume level
Rotate the VOL KNOB on the front panel or press the + or - button on the remote control
to adjust volume level during playback.
4. Volume Adjust
Rotate VOL KNOB clockwise to increase to increase volume,rotate anticlockwise to
reduce volume.
PAGE 2
Page 4
5. To mute or resume sound
Press MUTE button on the remote control to eliminate or resume sound immediately
during playback.
6. To select and adjust the mode of the sound and menu
Press SEL button repeatedly to select the mode of AF ON/AF OFF mode ,TA ON/TA OFF
PTY NEWS/PTY MUSICS,NEWS/POP M,BASS,TRE(treble), LIR(balance),
LOUD OFF/LOUD ON, VOL LAST/VOL DEFA, BEEP ON/BEEP OFF,DX/LOCAL
(in RADIO mode),STEREO/MONO(in RADIO mode),SUBW ON
/SUBW OFF,CLK XX XX, in the sequence and circulation.
In each item, rotate the VOL KNOB to select your desired mode.
1) VOL LAST/VOL DEFA
VOL LAST: The volume level when switching off will be restored with power On.
VOL DEFA: The volume level of the main unit after power on is a constant value.
When selecting VOL DEFA item, press SEL button to display AVOL , then you can pre-set
the constant volume level after power on with VOL control.
2) BEEP ON/BEEP OFF
BEEP ON mode: The beep is generated when any key is pressed.
BEEP OFF mode: The beep sound is disabled.
3) DX/LOCAL
Radio station search mode is divided by this DX/LOCAL switch, which can be used to
control an attenuator in the tuner during search. The detecting level of seek, scan,
auto-memory will be reduced as much as the attenuated level of the tuner. In radio mode,
press the LOC button to change local reception or distance reception. (Note: This button
is only for FM reception. In AM mode, LOC is invalid.)
4) CLK XX XX
When select CLK XX XX mode, Rotate the VOL KNOB to adjust HOUR, press SEL button
for confirmation. With the same means to adjust MINUTE.
7.To select a preset EQ mode
Press and hold BT button on the front panel to select the preset music equalizer curves:
FLAT,CLASSIC,ROCK,CINEMA,EQ OFF. The sound effect will be changed.
8..ZONE 1/2 Button
Pressing ZONE 1 or 2 button will turn on or off the audio source in each of the different
areas which your speakers are connected. “ZONE <1>” or “ZONE <2>” will display on
the LCD once it is selected.
9. To reset unit
When the display is incorrect, or the function buttons are not effective or
sound is distorted, then use a sharp point to press RESET button, that
will make the unit be reset to factory default and re-instate the correct functions.
PAGE 3
Page 5
Radio Operation
1. FREQUENCY SELECT
In RADIO mode. Press and hold PLAY/PAUSE button for about 5 seconds to
select your desired frequency EUROPE,USA1,USA2 or AUSTRALIA.
2. AM/FM BUTTON
In RADIO mode, press and hold INPUT MODE button on the front panel or briefly press
BND button on the remote control to select your desired radio band of FM1, FM2, FM3,
AM1, AM2 , and the selected band will be displayed on the LCD of the front panel.
3. TUNE/SEEK UP/DOWN
In RADIO mode:
1) Press and hold or button on the front panel or Press and hold
/ button on the remote control to automatically search down/up for a available
station from the current frequency.
2) Press or button on the front panel or press / button on
the remote control to manually search up or down with step by step for your desired station
from the current frequency.
4. APS BUTTON & SCAN BUTTON
In RADIO mode:
1) When pressing and holding APS button on the remote control or press and hold button on
the front panel, the radio searches from the lowest frequency and checks the signal strength level
until 1 cycle search is finished.And then the 6 strongest stations are preset to the corresponding preset
number memory bank. The AS operation is implemented in each bank of the selected band.
When the AS operation is finished, it will resume broadcasting
on the M1.(It can store 3x6 stations for FM and 2x6 stations for AM in all)
2) When briefly pressing APS button on the remote control or press button on the front panel,
the radio searches for each preset station from the M1. When the field strength level is more than
the threshold level of the stop level, the radio holds at that preset number for a few seconds with
releasing mute, and then searches again.
After finishing a circle of searching, it will stop searching on the M1.
NOTE: In FM band, FM1,FM2,FM3 is checked one at a time.
In AM band, AM1, AM2 is checked one at a time.
3)Press the SCAN button on the remote control to scan the radio frequency. If a valid signal has detected,
the current frequency will be hold and blinking for 5 seconds, then press SCAN again to stop and remain
the current frequency;otherwise, the radio will go on to scan the other radio frequency 5 seconds later.
5. PRESET STATION [ 1-6 ] BUTTONS
In RADIO mode:
1) To memorize the current frequency on the current band, press and hold any one of the six preset
buttons (1-6) .
2) To recall the preset memory on the current band, press one of the preset buttons [1-6] .
6. STEREO/MONO BUTTON
Press ST button on the remote control to select the STEREO or MONO sound mode for
FM band.
PAGE 4
Page 6
7. LOC BUTTON
1) In RADIO mode, when the signal of the distance radio station are very weak and the receiving
effect is bad during tuning, press LOC button on the remote control to turn off the LOC function,
then tune again for the distance radio station;
2) In RADIO mode, when the signals from the local radio stations are too strong, this could lead
to interference. press LOC button on the remote control to turn on the LOC function,
Re-tune for the local station required.
8. To search for stations with a PTY (PROGRAM TYPE) program
Press and hold button on the front panel or press button on the remote controlSEL PTY
to select one of PTY programs:
PTY MUSIC------------------------ PTY NEWS
1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO
2. EASY M, LIGHT M 2. SPORT, EDUCATE, DRAMA
3. CLASSICS, OTHER M 3. CULTURE, SCIENCE, VARIED
4. JAZZ, COUNTRY 4. WEATHER, FINANCE, CHILDREN
5. NATION M, OLDIES 5. SOCIAL, RELIGION, PHONE IN
6. FOLK M 6. TRAVEL, LEISURE, DOCUMENT
When turning on a PTY program, the PTY program and PTY word is flashed on LCD.
After selecting a desired PTY program and no operation for 5 seconds, it will search
for the station of the PTY program. During 1 loop, if the desired station of the PTY
program is not found,it returns to previous normal radio and PTY icon disappears.
9. AF [ALTERNATIVE FREQUENCIES] BUTTON
When pressed briefly, AF switching mode is selected and the state of AF switching
mode is displayed by AF segment in display.
Segment off: AF switching mode off.
Segment on: AF switching mode on, and has RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of AF all the
time. The interval of checking time of each AFs depends on the signal strength of the
current station, from a few minutes for strong station to a few seconds for weak station.
Every time that new AF is stronger than current station, it switches over to that frequency
for a very short time, and the NEW FREQUENCY is displayed for 1-2 seconds.
Because the mute time of AF switching or checking time is very short, it is almost
inaudible in case of normal program.
During FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only
receive and save RDS program.
10. TA [TRAFFIC ANNOUNCEMENT] BUTTON
When TA mode is on(TA is displayed on LCD), it will begin to seek TA station and TA
SEEK will be displayed on LCD for a while.
When traffic announcement is transmitted:
1). If the unit is in SD, USB mode, it will switch to radio mode temporarily.
2). If volume level is below 20, volume level is raised to 20, and returns to its previous
mode and volume level when the traffic announcement is over.
If volume is adjusted during traffic announcement, only the traffic announcement
volume is valid
PAGE 5
Page 7
USB Operation
1. Pause Playback
During playback , pr ess PLAY/PAUSE butto n on t he f ront panel or remot e
control to pause th e pl ayback, press PLAY/PAU SE b utton again to resu me
normal playback .
2. Stop Playback
During playback , pr ess STOP butt on o nce to pause the playba ck , then press the
PLAY/PAUSE button to r es ume the normal play ba ck ;
press STO P bu tt on twice to stop the pl ay back, then press PLAY/PAUS E
button to start pla yb ack from the beginnin g of t he first chapter/ tr ac k.
3. Select Chapter w it h the or button or / Butt on
Press or button o n th e fr ont panel or / Butt on
on the remote contr ol d uring playback to sel ec t the previous or nex t ch ap ter
to playback.
Note: Press or bu tt on o r press / Button
multiple times to a dv ance multiple chapt er s/tracks backwa rd o r fo rward .
4. To scan tracks
During playback, press INT button on the front panel briefly to play the first 10
seconds of each track.
Press INT button again to cancel INT function and retain playing the track
currently selected.
5. To repeat track(s)
During playback, press RPT button briefly to play the current track repeatedly,
and the LCD will display RPT ONE.
Press RPT button twice to play the tracks in the Album repeatedly, and the LCD
will display RPT DIR.
Press RPT button thrice to play the tracks of the albums, and the LCD will display
RPT ALL.
Press RPT button again to cancel RPT function, and the LCD will display RPT OFF.
6. To play tracks in random
During playback, press RDM button briefly to play all tracks in random. Press it
again to cancel RDM function.
7. Tracks search
Press APS button on the remote control, it will activate TRK SEARCH mode.
The LCD will display TRK 0/00/000(deside on the total number of tracks in the
USB stick) and flash the 0 on the biggest digit position. Then press + or - button
on the remote control to select number on the flashing digit position from 0 ~ 9,
Press APS button to change the position and with the same means to select
numbers in the other position. After finishing selecting the numbers on all digits
position, press PLAY/PAUSE button to play the track of the selected serial
number.
PAGE 6
Page 8
Bluetooth Handsfree System
2)Select th e it em of Finding the B lu etooth Devi ce a nd enter it. Aft er f inishing the
finding,i t wi ll show the name of t he B luetooth De vi ce FURRION DV3 01 0-XXXX
(where X can be a ny c haracter A-Z or n um ber 0-9 ) .Sele ct i t and enter it, the n it will
show an inter fa ce that ask you to in pu t a password, i np ut the passwo rd 0 000 and
enter it. Then it will tell yo u pa ir OK.
mobile
(1)Press TE L button to CAL L mod e, t he LCD will displ ay CALL
(2)Input te le phone numbe r wi th number butto n 0~9.
Short press C LE AR button to ca nc el the wrongl y in put number if nec essary
(3)Short pr es s TEL butto n to execute the di al ing.
Short press TEL/ 1 bu tton on the fro nt p anel,it will sh ow C ALL OUT on
the LCD, then it wi ll e xecute the dial in g.
Page 9
5.1 Incoming ca ll r inging, short p re ss TEL button o n th e remote contro l or 1 b utton on
the front panel t o ac cept the call .
5.2 To reject Incom in g call ringing, s ho rt press HANG UP bu tt on on the remote co nt rol
or 2 button on the fr on t panel to REJECT the call.
5.3 During a phon e ca ll, short press H AN G UP button on the re mo te control
or 2 button on the fr on t panel to end the ca ll .
Note: When an i ncoming cal l is p resent the LC D of the DV3010 w il l display CAL L IN.
6. In BT mode , press CALL LO G button to che ck t he LAST DIA L,LAST IN ,L AST MIS S ph one
numbers(p re ss + or - button to r ot ate)
7. To play an aud io file from an ext er nal Bluetoo th d evice(mob il e phone) of the D V3 010
After the device ha s be en paired success fu lly and the DV301 0 screen displays
LINK OK
If your mobile devi ce s upports A2DP you wi ll t hen be able to stream m us ic from
your Bluetooth de vi ce so it can be played by s te reo speaker.
You mu st select on yo ur m obile Blu et ooth device t o play the audi o through Blu et ooth.
If your mobil e device supp orts AVRCP then you will b e able to contr ol the basic ph on e
audio outpu t functions b y the Wal l mount Ste re o controls. E g. Play Pa us e.
Note : Du ring othe r modes(e xecpt Blu etoot h co nvers at ion), p re ss BT MOD E button on t he
front pan el to switc h the mod e wi th othe rs .
8.To setup your S te reo using NFC (o nly support mob il e phone with NF C fu nction)
(1) Turn on the NF C fu nction of you r mo bile phone and ma ke s ure the scree n is a ctive
and unlocke d.
(2) With the NF C de tection are a of y our phone touch w ith the NFC detec ti on area
of the Stereo , yo u can connect o r di sconnect yo ur m obile phone wit h th e Stereo
convenien tl y.
Note: For the f ir st time pair an d co nnect, it wil l as k you to input a pass word.
The pas sw ord is “0000”.
PAGE 8
Page 10
Installing the unit
* Before f inally installing the uni t, connect the wiring tempo rarily and make sure
the unit a nd the system work properly.
*Fix the u nit with screw according to f ollowing diagram.
SCREW
PLASTIC SHELL
OF THE FRONT PANEL
SCREW
1. Remove plastic shell of thefrontpanelfrom the unit.
2. Fix the unit with 4 pieces #8 pan head self tapping screw.
3. Put back plastic shell of the front panel to the unit.
PAGE 9
Page 11
Wiring Diagram
IR REMO TE JACK
ANTEN NA
AV IN
AV OUT
SUBWO OFER OU T
Wiring connecting socket view
PIN N OCOL ORFUN CTION
1
2
3
4
5
6
7
8
9
10
11
12
GRE Y
GRE Y/BLA CK
WHI TE
WHI TE/BL ACK
GRE E/BLA CK
GRE E
PUR PLE/B LACK
PUR PLE
BLU E
NON E
RED
BLA CK
FRO NT RIGH T SPEAK ER (+)
FRO NT RIGH T SPEAK ER (-)
FRO NT LEFT S PEAKE R (+)
FRO NT LEFT S PEAKE R (-)
REA R LEFT SP EAKER ( -)
REA R LEFT SP EAKER ( +)
REA R RIGHT S PEAKE R (-)
REA R RIGHT S PEAKE R (+)
AUT O AN TENNA
MEM ORY B+
GRO UND
AUDIO I N
WIRIN G CONNE CTI NG S OCK ET
PAGE 1 0
Page 12
Specification
GENERAL
Supply Voltage DC 12V
Current Consumption Max.10A
Power Output 4x 25W RMS
Number of channels 2 STEREO channels.
Unit Dimensions (L X W X H): 200x110.5x105(mm)
FM SECTION
Frequency range 87.5Mhz - 108Mhz (Europe)
87.5 Mhz - 107.9Mhz(U.S.A.)
87.5 Mhz - 108Mhz(Australia)
Effective sensitivity 3uV.
I.F Frequency 10.7MHz.
AM SECTION
Frequency range 522Khz - 1620Khz(Europe)
530khz - 1710Khz(U.S.A.)
522 Khz - 1710Khz(Australia)
Effective sensitivity 40dB
I.F Frequency 450KHz
Preamp Output 2 V Output
USB PLAYBACK
System MP3 audio system
Frequency characteristics 20Hz -100Hz dB
10KHz-20KHz dB
Signal to noise (USB) 50dB [1KHz]
<=5
<=5
FCC Notice:
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
---Consult the dealer or an experienced radio/TV technician for help.
WAR NING: Ch an ges or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment complied with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Note: It must not be collocated or operated in conjunction with any other antenna or transmitter.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.