Furman AC-210 E, AC-215 Owner's Manual

AC-215 / AC-210 E AC Power Conditioner

- 2 -

Thank you for purchasing the Furman

AC-215 / AC-210 E Power Conditioner. For

video, and broadcast professionals. Furman’s

Today’s power grid typically experiences

worst, they can severely damage individual

The AC-215 / AC-210 E is specifi cally

●

Advanced Linear Filtering Technology for

●

Series Multi-Stage Protection Plus for AC

your equipment

●

Zero ground contamination circuitry

●

Compact chassis design easily attaches

to any fl at screen television mount with

To obtain best results from your Furman

AC-215 / AC-210 E Power Conditioner, please

Warning

Warning

To reduce the risk of electrical shock, do not

the enclosure. Do not remove the covers.

There are no user serviceable parts inside.

The lightning fl ash with an arrowhead symbol,

to constitute a risk of electric shock.

AC-215 / AC-210 E AC Power Conditioner

- 3 -

4. The unit should only be connected to a 120

VAC, 60Hz, 15 Amp [230 VAC and10 Amp for

the AC-210 E] grounded electrical outlet. Do

the power plug.

that they are not likely to be walked on, tripped

the condition of the cords and cables at the

To prevent risk of fi re or injury, damaged cords

to operate the unit without a safety ground

what is described in this manual. All other

While the AC power delivered by today’s

video equipment. With the average investment

your incoming AC power.

Technology (LiFT) to insure that fl at screen

televisions, projectors, processors, and other

Another feature unique to Furman’s SMP+

when it is fed 137 volts [270VAC for the AC-210

the extreme voltage. Only Furman offers this

AC-215 / AC-210 E AC Power Conditioner

- 4 -

The AC Series SMP+ circuit senses voltages

that are high enough to cause damage to your

The Extreme Voltage Shutdown LED is

for the AC-210 E UK] is sensed, either on initial

NOTE: If the mains power is above the high
cutoff voltage and has caused the unit to
remove power from its outlets, it cannot restore
power without the operator manually turning
the unit off, then on again. Avoid turning the
unit back on, without fi rst checking the source
of the problem, and perhaps changing the AC
source.

Although the Furman SMP+ circuit assures

without some degree of damage. In the rare

will turn off. If this happens, some level of

to Furman Sound, or an authorized Furman

Troubleshooting

Possible Cause

tripped due to excessive load.

Action Needed

equipment from the AC-215 / AC-210

E, and push the re-set tab into the

Circuit breaker bezel.

Possible Cause

are damaged.

AC-215 / AC-210 E AC Power Conditioner

- 5 -

The brackets can be positioned facing in or out as shown to best allow for different types of installations.

The AC-215 / AC-210 E can be conveniently and inconspicuously mounted within an equipment

AC-215 / AC-210 E AC Power Conditioner

- 6 -

Warranty

purchaser of this product, the Furman AC-215 or

AC-210E, that the product will be free from defects

years from the date of purchase. The purchaser of

purchase to complete warranty registration by mail

purchase invoice showing the purchase date;

paid by Furman.

AC power line with a protective ground in an indoor

location. Furman’s Connected Equipment Warranty

All warranties contained herein are null and void

ground and must not be “daisy-chained” together

lightning) such as fl ood, earthquake, war, terrorism,

low-voltage disturbances (i.e. brownouts or sags),

AC-215 / AC-210 E AC Power Conditioner

- 7 -

persons other than pursuant to written authorization

purchaser, and are not a part of the contract for

All equipment being returned for repair must

To get an R/A number, please call the Furman

for repair, please use the original packaging to

Web: www.furmansound.com

040105-D

AC Current Capacity

Input:

15 Amp capacity required (10 Amp for the AC-210 E)

Output:

15 Amp RMS (both outlets combined) (10 Amp for the

AC-210 E)

AC Noise Attenuation

Transverse (Differential) Mode

>80dB from 100kHz to 1GHz

Transient Voltage Surge

Series Multi-Stage Protection Plus Non-Sacrifi cial

with Zero Ground contamination

188V peak clamping @ 6000V/3000A input

276V peak clamping for AC-210 E

137 VAC typically

(270 VAC typically for the AC-210 E)

(260 VAC typically for the AC-210 E UK)

1.75” (H) x 5” (W) x 8.5” (D), 3 lbs.

CE / TUV / NRTL-C