Funai SRTD420 User Manual

OWNER’S

As an ENERGY STAR

Partner, our company has
determined that this product meets
the E

NERGY STAR guidelines for

energy efficiency. E

NERGY STAR

is a U.S. registered mark.

®

®

®

Owner's Manual

MANUAL

COLOR TV/DVD

SRTD420(20 inch)

INSTRUCCIONES
EN ESPAÑOL INCLUIDAS.

SUPPLIED ACCESSORIES

BatteriesRemote Control Unit

2 AA BatteriesNE226UD

If you need additional operating assistance after reading this

owner’s manual, please call

TOLL FREE : 1-800-968-3429.

Please read before using this equipment

Owner’s Manual

0EMN02492

WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSON­NEL.

The caution marking is located on the rear of the cabinet.

IMPORTANT SAFEGUARDS

1.Read instructions-All the safety and operating instructions

should be read before the appliance is operated.

2.Retain Instructions-The safety and operating instructions

should be retained for future reference.

3.Heed Warnings-All warnings on the appliance and in the

operating instructions should be adhered to.

4.Follow Instructions-All operating and use instructions

should be followed.

5.Cleaning-Unplug TV/DVD from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the possi­bility of the loss of an authorization code for a CATV con­verter, is not intended to be unplugged by the user for clean­ing or any other purpose, may exclude the reference to
unplugging the appliance in the cleaning description other­wise required in item 5.

6.Attachments-Do not use attachments not recommended by

the TV/DVD manufacturer as they may cause hazards.

7.Water and Moisture-Do not use this TV/DVD near water-

for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool,
and the like.

8.Accessories-Do not place this TV/DVD on an unstable cart,

stand, tripod, bracket, or table. The TV/DVD may fall, caus­ing serious injury to someone, and serious damage to the
appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
TV/DVD. Any mounting of the
appliance should follow the manu­facturer’s instructions and should use
a mounting accessory recommended
by the manufacturer. An appliance
and cart combination should be
moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the appli­ance and cart combination to over­turn.

PORTABLE CART WARNING

AVERTISSEMENT POUR UNE

TABLE ROULANTE PORTATIVE

S3126A

THIS SYMBOL INDICATES THAT DAN­GEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMP ANYING THE
APPLIANCE.

Accessoires- Ne placez pas cette TV/DVD sur une table
roulante, un support, un trépied, une console ou une table
instable. Cette TV/DVD risquerait de tomber, pouvant
gravement blesser quelqu'un et l'appareil même pourrait
être sérieusement endommagé. N'utilisez qu'une table
roulante, un support, un trépied, une console ou une table
recommandé par le fabriquant, ou vendu avec la TV/DVD.
Pour n'importe quelle installation de l'appareil, on devra
suivre les instructions du fabriquant et l'on devra utiliser les
accessoires d'installation recommandés par le fabriquant.
L'ensemble combiné de l'appareil avec une table roulante
devra être déplacé avec précaution. Des arrêts brusques,
une force excessive et des surfaces inégales peuvent provo­quer le renversement de l'ensemble combiné de
l'appareil/table roulante.

9.Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable
operation of the TV/DVD and to protect it from overheat­ing, and these openings must not be blocked or covered.
The openings should never be blocked by placing the
TV/DVD on a bed, sofa, rug, or other similar surface. This
TV/DVD should never be placed near or over a radiator or
heat register. This TV/DVD should not be placed in a built­in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions
have been adhered to.

10.Power Sources-This TV/DVD should be operated only

from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For TV/DVDs intended to operate from battery
power, or other sources, refer to the operating instructions.

11.Grounding or Polarization-This TV/DVD is equipped

with a polarized alternating-current line plug(a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try revers­ing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.

–2–

EN

0C28

EXAMPLE OF ANT ENNA GRO UNDING AS P ER

NATIONAL ELE CTRICAL CODE

S2898A

FIGURE A

ELECTRIC
SERVICE
EQUIPMENT

NEC - NATIONAL ELE CTRI CAL CO DE

GROUND

CLAMP

ANTENNA

LEAD IN
WIRE

ANTENNA

DISCHARGE UNI T
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDI NG
ELECTRODE SYSTEM
(NEC ART 250, PART H)

12.Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying par­ticular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.

13.Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV/DVD, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements
for the grounding electrode. (Fig. A)

14.Lightning-For added protection for this TV/DVD receiver

during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the TV/DVD due to lightning and
power-line surges.

15.Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind

into this TV/DVD through openings as they may touch dan­gerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on
the TV/DVD.

18.Servicing-Do not attempt to service this TV/DVD yourself

as opening or removing covers may expose you to danger­ous voltage or other hazards. Refer all servicing to qualified
service personnel.

19.Damage Requiring Service-Unplug this TV/DVD from

the wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the

TV/DVD.
c. If the TV/DVD has been exposed to rain or water.
d. If the TV/DVD does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions, as improper adjust-

ment of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the TV/DVD to its normal operation.
e. If the TV/DVD has been dropped or damaged in any way.
f. When the TV/DVD exhibits a distinct change in perfor-

mance-this indicates a need for service.

20.Replacement Parts-When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21.Safety Check-Upon completion of any service or repairs to

this TV/DVD, ask the service technician to perform routine

safety checks to determine that the TV/DVD is in proper

operating condition.

22.Heat-This TV/DVD product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

–3–

EN

0C28

PRECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public perfor­mance and lending of discs are prohibited.

This product incorporates copyright protection tech­nology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.

FCC WARNING- This equipment may gener­ate or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction man­ual. The user could lose the authority to oper­ate this equipment if an unauthorized change
or modification is made.

RADIO-TV INTERFERENCE

This equipment has been tested and found to com­ply with the limits for a Class B digital device, pur­suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.

However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be deter­mined by turning the equipment off and on, the
user is encouraged to try to correct the interfer­ence by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment
and receiver.

3) Connect the equipment into an outlet on a cir­cuit different from that to which the receiver is
connected.

4) Consult the dealer or an experienced radio/TV
technician for help.

The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial
number as yours. You should record the number and other vital information here and retain this book as a per­manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.

LASER SAFETY

This unit employs a laser. Only a qualified service
person should remove the cover or attempt to ser­vice this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUST­MENTS OR PERFORMANCE OF PROCE­DURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK
MECHANISM.

This Class B digital apparatus complies with
Canadian ICES-003.

Cet appareil numérique de la classe B est con­forme à la norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable
and can be reused. Please dispose of any materials
in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerat­ed but disposed of in accordance with your local
regulations concerning chemical wastes.

–4–

EN

0C28

LOCATION

For safe operation and satisfactory performance of
your TV/DVD, keep the following in mind when
selecting a place for its installation:

Shield it from direct sunlight and keep it away from

•

sources of intense heat.
Avoid dusty or humid places.

•

Avoid places with insufficient ventilation for proper

•

heat dissipation. Do not block the ventilation holes at
the top and bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.

Install unit in a horizontal position.

•

Avoid locations subject to strong vibration.

•

Do not place the TV/DVD near strong magnetic fields.

•

Avoid moving TV/DVD to locations where temper-

•

ature differences are extreme.

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

•

Do not pull on the power cord when disconnecting

•

it from an AC wall outlet. Grasp it by the plug.
If, by accident, water is spilled on your unit, unplug

•

the power cord immediately and take the unit to an
Authorized Service Center for servicing.

Do not put your fingers or objects into the

•

TV/DVD disc loading tray.
Do not place anything directly on top of the unit.

•

SYMBOLS USED IN THIS MANUAL

The following symbols below appear in some head­ings and notes in this manual, with the following
meanings

TV

: Description refers to TV operation (in the TV mode).

DVD-V

: Description refers to playback of DVD video discs

(in the DVD mode).

CD

: Description refers to playback of audio CDs

(in the DVD mode).

MP3

: Description refers to playback of MP3 discs

(in the DVD mode).

QUICK

: Description refers to the items to be set by the

QUICK mode (in the DVD mode).

WARNING

Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a TV/DVD
which has moisture, it may damage the DVD and
TV/DVD. Therefore when the condensation occurs
inside the unit, turn POWER on and allow at least 2
hours for the unit to dry out.

–5–

EN

0C28

TABLE OF CONTENTS

C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2

C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

AVOID THE HAZARDS OF ELECTRICAL

SHOCK AND FIRE . . . . . . . . . . . . . . . . . . . . . .5

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

SYMBOLS USED IN THIS MANUAL . . . . . . .5

C TABLE OF CONTENTS . . . . . . . . . . . . . . . . . .6

C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

C

OPERATING CONTROLS AND FUNCTIONS

INSTALLING THE BATTERIES . . . . . . . . . . .9

C PREPARATION FOR USE . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTIONS . . . . . . .10

CONNECTING TO FRONT A/V INPUT JACKS
CONNECTING TO AN AMPLIFIER/RECEIVER

EQUIPPED WITH DIGITALINPUT JACKS

(DVD, CD, MP3 sound only) . . . . . . . . . . . . . . .11

CONNECTING TO AN AMPLIFIER/RECEIVER
WITH A DOLBY DIGITAL DECODER
(for DVD)

TV SECTION

C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .13

SELECTING THE LANGUAGE . . . . . . . . . . .13

CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . .13

DELETING (OR ADDING) CHANNEL . . . . .14

C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .15

WATCHING ATV PROGRAM . . . . . . . . . . . .15

DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .15

PICTURE CONTROL . . . . . . . . . . . . . . . . . . .15

SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .16

CLOSED CAPTION SYSTEM . . . . . . . . . . . .16

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .17

DVD SECTION

C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .19

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .19

DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .19

C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .20

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .20

GENERAL FEATURES . . . . . . . . . . . . . . . . . .20

DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .20

TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .20

RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

STEP BY STEP PLAYBACK . . . . . . . . . . . . .21

FAST FORWARD/REVERSE SEARCH . . . . .21

SLOW FORWARD / SLOW REVERSE . . . . .21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . .8

. .

11

12

C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .22

TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .22

TITLE / CHAPTER SEARCH . . . . . . . . . . . . .22

TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .22

MARKER SETUP SCREEN . . . . . . . . . . . . . .22

C SPECIAL PLAYBACK FUNCTION . . . . . . . .23

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .23

RANDOM PLAYBACK . . . . . . . . . . . . . . . . .23

C PLAYING A MP3 DISC . . . . . . . . . . . . . . . . . .24

MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . .24

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .24

RANDOM PLAYBACK . . . . . . . . . . . . . . . . .24

C CHANGING THE SETTINGS . . . . . . . . . . . .25

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .25

AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .25

STEREO SOUND MODE . . . . . . . . . . . . . . . .25

CAMERAANGLE . . . . . . . . . . . . . . . . . . . . . .25

BLACK LEVEL SETTING . . . . . . . . . . . . . . .25

VIRTUAL SURROUND . . . . . . . . . . . . . . . . .25

C THE ON-SCREEN INFORMATION . . . . . . .26

C CHANGING THE DVD SETUP ITEMS . . . .27

LANGUAGE SETTING . . . . . . . . . . . . . . . . .27

DISPLAY SETTING . . . . . . . . . . . . . . . . . . . .28

AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .28

PARENTAL CONTROL . . . . . . . . . . . . . . . . .29

INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . .29

C TROUBLESHOOTING GUIDE . . . . . . . . . . .30

C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .32

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .32

C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .33

C ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover

–6–

EN

0C28

FEATURES

TV Mode

181 channel capability PLL frequency synthesiz-

•

er tuner

(A converter may be necessary to view scrambled cable
channels.)

Infrared remote control

•

Trilingual on screen menu display selectable in

•

English, Spanish, or French

¡Sleep Timer

The Sleep Timer function enables the unit to turn off the
power without pressing POWER after a preselected time
period.

¡Closed Caption Decoder

You may view specially labeled (cc) TV programs,
movies, news, etc. with either a dialogue caption or text
display added to the program.

¡Auto Shut Off Function

If there is no air signal input from the antenna terminal and
no operation for 15 minutes, the TV/DVD will turn itself
off automatically.

¡V-CHIP

Enables parents to prevent their children from watching
inappropriate material on TV.

DVD Mode

¡Dolby Digital sound

This TV/DVD can output a Dolby Digital audio signal
from the digital audio output jack.

¡Still/fast/slow/step playback

Various playback modes are available including still pic­tures, fast forward/reverse, slow motion and frame by
frame.

¡Random playback for audio CD and MP3

This TV/DVD can shuffle the order of tracks to play them
in random order.

¡Program playback for audio CD and MP3

You can program the order of tracks to play in any desired
order.

¡DVD menus in a desired language

You can display DVD menus in a desired language, if
available on a DVD disc.

¡Screen saver/Auto power-off functions

The screen saver program starts when there is no input
from the TV/DVD for five minutes in the stop mode.
When the screen saver program has been in opperation for
15 minutes, the power will automatically turn off.

¡Subtitles in a desired language

You can select a desired language for the display subtitles,
if that language is available on a DVD disc.

¡Selecting a camera angle

You can select the desired camera angle, if a DVD disc
contains sequences recorded from different angles.

¡Choices for audio language and sound mode

You can select the desired audio language and sound mode,
if different languages and modes are available on a DVD
disc.

¡Parental lock

You can set the control level to limit playback of DVD
discs which may not be suitable for children.

¡Automatic detection of discs

This TV/DVD automatically detects if the loaded disc is
DVD, audio CD or MP3.

¡On-screen display

Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.

¡Search

Chapter search / Title search / Track search / Time search

¡Repeat

Chapter / Title / Track / Group / All / A-B

¡Marker

The location on a specific DVD disc designated by the
user can be accessed later.

¡Resume Play

User can resume to playback from the location at which
play was stopped.

¡Virtual Surround
¡Bit rate indication

¡DRC (Dynamic range control)

You can control the range of the difference between the
loudest abd softest sounds.

–7–

EN

0C28

VIDEO L–AUDIO–R

POWER VOLUME CHANNEL STOP SKIP SKIP PAUSE

HEADPHONE

–SEARCH–

OPEN/
CLOSE

PLAY

742 89101112 13 146531

26

27

16

17

9

11

12
23

20
22

15

25

24

21

10

28

29

30

33

35

5

6

13
34

19
18

8

31

32

4

36

REV

SLOW

PLAY

STOP

FWD

ENTER

PAUSE

DISC

MENU

RETURNTITLESETUP

A

-

B

REPEATSEARCH MODE

CLEAR

MODE

ANGLESUBTITLEAUDIO

DISPLAY

SKIP

SELECT

POWER PICTURE

OPEN/
CLOSE

CH.

VOL.

MUTEV.SURR

SLEEP

123
456
789

0 +10

+100

OPERATING CONTROLS AND FUNCTIONS

TV/DVD FRONT PANEL

REMOTE CONTROL

1.Disc loading tray

2.VIDEO input Jack [page 11]

Connect to the video output jack of a video
camera, VCR or Video game system.

3.AUDIO L/R input Jacks [page 11]

Connect to the audio output jacks of a video
camera, VCR or Video game system.

4.POWER Button [page 13]

Press to turn the power on and off.

5.VOLUME K/L (VOL. m/n) Buttons

Press to control the volume level.

6.CHANNEL K/L (CH. K/L) Buttons [page 13]

Press to select memorized channel.
Press to change to TV mode when in DVD mode.

[Fig. 1]

[Fig. 2]

7.Remote Sensor Window

8.STOP Button [page 20]

Stops operation of the disc.

9.SKIP H Button [page 22]

Begins playback from beginning of current
chapter or track

SEARCH (REV) E Button (Front Panel)
[page 21]

During playback or in the pause mode, press and
hold button down

for a few seconds to change

reverse playback speed.

10. PLAY Button [page 20]

Begins playback of disc.
Press to change to DVD mode when in TV mode.

11. SKIP G Button [page 22]

Begins playback from beginning of next chapter.

SEARCH (FWD) D Button (Front Panel)
[page 21]

During playback or in the pause mode, press and
hold button down

for a few seconds to change for-

ward playback speed.

12. PAUSE Button [page 21]

Pauses the current disc movement.

13. OPEN/CLOSE Button [page 20]

Press to open disc tray to insert a disc or to open to
remove a disc.

14. HEADPHONE Jack

To connect headphone (not supplied) for personal
listening.

15. MODE Button [pages 23-25]

Activates program playback or random playback
mode when playing CDs or MP3.

16. Number Buttons
TV Mode:

[page 15]

Press two digits to directly access the desired channel.
Remember to press 0 before a single digit channel.

+100 Button

Press to select cable channels which are higher than 99.

DVD Mode: [page 22]

Press to enter the desired number.

–8–

+10 Button

Press to enter the desired numbers which are greater
than 9.

EN

0C28

COAXIAL

ANT.

3938

37

TV/DVD REAR VIEW

[Fig. 3]

17. SLEEP Button [page 16]

Press SLEEP to display the sleep timer and begin
operation. The shut off time can be determined by
the number of times you press this button. (0, 30,
60, 90, or 120 minutes)

18. REV h Button [page 21]

Press to view the DVD picture in fast reverse
motion. Press PAUSE, then press this button to begin
slow motion playback. Press this button repeatedly
to change the reverse speed of slow motion.

FWD g Button [page 21]

Press to fast forward the Disc. Press PAUSE, then
press this button to begin slow motion playback.
Press this button repeatedly to change the forward
speed of slow motion.

19. V.SURR (VIRTUAL SURROUND) Button

[page 25]

Press to set virtual surround on/off.

20. SETUP Button [pages 13,27-29]

Press to enter or exit the TV menu or DVD setup
mode.

21. TITLE Button [page 20]

Displays the title menu on DVD disc.

22. CLEAR Button [pages 22-24]

Resets a setting.

23. DISPLAY Button
TV Mode:

Press to display the channel number on the screen.
If you press it a secound time, the channel number
will disappear.

DVD Mode: [page 26]

Displays the current DVD status on the TV screen.

24. SEARCH MODE Button [page 22]

Press to locate a desired point.

25. AUDIO Button [page 25]

Press to select a desired audio language or sound
mode available on a DVD disc.

26. SUBTITLE Button [page 25]

Press to select a desired subtitle language.

27. REPEAT Button [page 23]

Repeats playback of the current disc, title, chapter
or track.

28. ANGLE Button [page 25]

Press to change the camera angle to see the sequence
being played back from a different angle
a DVD disc

29. REPEAT A-B Button [page 23]

Repeats playback of a selected section.

30. RETURN Button [page 25]

Returns to the previous operation in the DVD setup
mode.

31. ENTER Button [pages 13, 20]

Press to accept a setting.

.

available on

32. Arrow Buttons
TV Mode:

Press to select a setting mode from the menu on the
TV screen.
Press to select or adjust from a particular menu.

DVD Mode: [page 20]

Use when making settings while watching the
display on a TV screen.

33. DISC MENU Button [page 20]

Displays the menus available on a DVD disc.

34. SELECT Button [page 20]

Press to change to TV mode, FRONT A/V input
mode or DVD mode.

NOTE: When you select the DVD mode by this

[page 13]

button, press PLAY or OPEN/CLOSE first.
Otherwise, the DVD features do not function.

35. MUTE Button

Press MUTE to turn off the sound
portion of the TV program. (Volume level display
turns LIGHT RED from LIGHT BLUE.) Press
MUTE again or press VOL.
sound.

36. PICTURE Button [page 15]

Press to enter picture adjustment mode.

37. Power cord

Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook on

38. COAXIAL digital audio out Jack (DVD, CD, MP3
Audio Only)

Connect to the digital input of an external
amplifier or receiver.

39. ANT. in Jack

Connect to an antenna, cable system, or satellite sys­tem.

the back of the TV to avoid breaking a wire
before you connect to a standard AC outlet.

[pages 11, 12]

m or n to restore

INSTALLING THE BATTERIES

1)Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.

2)Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.

3)Replace the cover.

NOTES

¡Do not mix alkaline and manganese batteries.
¡Do not mix old and new batteries.

–9–

EN

0C28

Satellite Box or
Cable Box
(Not supplied)

OUT

PREPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

IN

From Cable System or
Satellite Dish

VHF/UHF Antenna
(Not supplied)

VHF Antenna
(Not supplied)

From
Cable System

75-ohm Coaxial

or

COAXIAL

ANT.

ANT.

VHF/UHF
Combiner

or

(Not supplied)

UHF Antenna
(Not supplied)

Cable (Not supplied)

or

Note to CATVsystem installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.

NOTE:

Before plugging the antenna into the ANT. IN jack of the TV/DVD, check that
the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin
into the ANT. IN jack of the TV/DVD.

VHF/UHF COMBINED ANTENNA

A VHF UHF 75 ohm combination antenna can be
connected to ANT terminal.

CABLE WITH CONVERTER/DESCRAM­BLER BOX OR SATELLITE BOX

If your cable service supplies you with a converter

Flat twin-lead cable

Bent pin

Cable

Plug

(Needs to be straightened)

(Straight pin)

box or if you use a satellite system, you can use the

VHF/UHF SEPARATE ANTENNAS

In some areas it will be necessary to use an outdoor
antenna.

basic connection shown here.
Channel selection must be made with the converter

box or satellite box. This means that channels cannot
be changed using the TV/ DVD Remote Control.

CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX

Use this connection if your cable system connects
directly to your TV/DVD without a converter box.
Use the TV/ DVD Remote Control to select channels.

TO VIEW A SCRAMBLED/UNSCRAMBLED
CHANNEL

1.Set the TV/DVD channel selector to the output
channel of the Cable Converter Box or Satellite
Box. (Ex. CH3)

2.Select the channel to view at your Cable Converter
Box or Satellite Box.

[Fig. 4]

–10–

EN

0C28

CONNECTING TO FRONT A/V INPUT JACKS

COAXIAL

ANT.

Amplifier/Receiver equipped with

digital input jacks.

To COAXIAL DIGITAL
AUDIO INPUT jack

To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD, CD, MP3 AUDIO OUT)

When you watch a program recorded on an another
source (VCR, video camera or Video game system),
use the audio/video input jacks on the front of the
TV/DVD.

Connect the audio/video output

AUX

[Another source]

To th e
audio out­put jacks

[Front of the TV/DVD]

jacks of the source to the AUDIO
L/R and VIDEO jacks of this
TV/DVD. Then press SELECT until
"AUX" appears on the screen.

NOTE:

When you connect a monaural VCR (another

•

source) to this TV/DVD, connect the Audio output
jack of the monaural VCR (another source) to the
AUDIO L jack of this TV/DVD. The audio will

Audio/Video
cables
(not supplied)

etc.

To the video
output jack

VIDEO L–AUDIO–R

distributed in both L and R channel equally.

CONNECTING TO AN AMPLIFIER/RECEIVER EQUIPPED WITH

DIGITAL INPUT JACKS (DVD, CD, MP3 sound only)

Use an audio coaxial digital cable available at retail stores for the audio connections.

[Fig. 5]

NOTES:

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital

•

sound by an MD or DAT deck.
Be sure to turn off the power to all components in the system before making connections.

•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set-

•

tings may generate noise distortion, and may also damage the speakers. (See page 28 to set DOLBY
DIGITAL to OFF.)

This will only allow 2-channel DVD sound to be listened to on the amplifier.

•

–11–

[Fig. 6]

EN

0C28

CONNECTING TO AN AMPLIFIER/ RECEIVER WITH A

COAXIAL

ANT.

Front speaker

(left)

Center

speaker

Front speaker

(right)

Surround

speaker

(left)

Surround

speaker

(right)

Subwoofer

To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack

To COAXIAL DIGITAL
AUDIO INPUT jack

Amplifier/Amplifier/ReceivReceiver wither with

DolbDolby Digital decodery Digital decoder

Amplifier/Receiver with

Dolby Digital decoder

DOLBY DIGITAL DECODER (for DVD)

To use this TV/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/DVD can
outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up
to a receiver with Dolby Digital decoder, you can enjoy high-quality surround sound as enjoyed in movie the­aters.

Use audio coaxial digital cables available at retail stores for the audio connections.

[Fig. 7]

NOTES:

Be sure to turn off the power to all components in the system before connecting another component.

•

Refer to the Owner's Manuals for the components to be connected to the TV/DVD.

•

If connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the

•

setup mode. (See page 28 to set DOLBY DIGITAL to ON.)
Unless connected to a receiver with Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output

•

in the setup mode. Playing a TV/DVD using incorrect settings may generate noise distortion, and may also
damage the speakers.

Only DVD audio is available using the digital audio out jack.

•

Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.

–12–

EN

0C28

SET UP FOR USE

TV SECTION

SELECTING THE LANGUAGE

TV

1 Plug in the TV/DVD power cord

Plug the TV/DVD power cord into a
standard AC outlet.

NOTE:

If any digits appear in the corner of

•

the screen, press POWER without
unplugging the power cord.

Make sure ...

Press POWER to turn on the TV/DVD.

•

NOTE: This function effects only the language on
the screen menu and not the audio source.

2 Select “LANGUAGE”

Press SETUP on the remote control.
Press Arrow (

K/L) to point to

“LANGUAGE”.

3 Select “ENGLISH”, “ESP AÑOL”or “FRANÇAIS”

Select “ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French using ENTER.

4 Exit the Language mode

Press SETUP to return to TV mode.
NOTE: If for some reason the menu is in Spanish or

French, press SETUP, press Arrow (K/L) to point to
“IDIOMA [ESPAÑOL]” or “LANGAGE
[FRANÇAIS]”, then press ENTER, then press
SETUP on the remote control.

- TV SETUP -

CHANNEL SET UP
V-CHIP SET UP

B LANGUAGE [ENGLISH]

CAPTION [OFF]

CHANNEL SET UP

TV

You can program the TVs tuner to program all the
channels you receive in your area.

NOTE: Channel memory programming is NOT
needed when connected to a cable box or satellite
box. Just select the TV/DVD channel selector to the
output channel of the cable box or satellite box (Ex
CH3). Then select the channel to be viewed on the
Cable Box or Satellite Box.

Make sure ...

Press POWER to turn on the TV/DVD.

•

1 Select “CHANNEL SET UP”

Press SETUP on the remote control.
Press Arrow (

K/L) to point to

“CHANNEL SET UP”.
Then, press ENTER.

2 Begin auto ch programming

Press Arrow (K/L) to point to
“AUTO CH PROGRAMMING”.

Then, press ENTER.
The tuner scans and memorizes all

the active channels in your area.

3 After scanning

The tuner stops on the lowest memorized channel.

When AUTO CH PROGRAMMING is activated

•

where there is no TV signal input, “NO TV SIG­NALS” will appear on the display after the com­pletion of the channel scanning.

CHANNEL PRESETTING:

The TV may memorize TV channels as CATV

•

channels if reception conditions are poor. If this
happens, check the antenna connections and try the
AUTO PRESET CH action again, or wait until
reception conditions are better and then try it again.

- TV SETUP -

B CHANNEL SET UP

V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]

– CHANNEL SET UP –

ADD / DELETE CH (CATV)

B AUTO CH PROGRAMMING

–13–

EN

0C28

DELETING (OR ADDING)

CHANNEL

TV

The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)

1 Select “CHANNEL SET UP”

Press SETUP on the remote control.
Press Arrow (

K/L) to point to

“CHANNEL SET UP”.
Then, press ENTER.

- TV SETUP -

B CHANNEL SET UP

V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]

2 Select “ADD/DELETE CH”

Press Arrow (K/L) to point to
“ADD/DELETE CH”.

– CHANNEL SET UP –

B ADD / DELETE CH (CATV)

AUTO CH PROGRAMMING

Press ENTER.

3 Enter the desired channel number

Press Arrow (K/L) until your
desired channel number appears.
(You can also use the number but­tons or CHANNEL(CH.) K/L to

08

ADD / DELETE

enter it) (Example: CH8)

You must proceed single-digit

•

channel numbers with a zero (Example: 02 ... 09).
When selecting cable channels which are higher

•

than 99, press +100 first, then, press the last two
digits. (Example: to select channel 125, first press
+100, then press 2 and 5).

4 Delete (or add) it from (into) memory

Press ENTER. The channel number changes to light
red. The channel is deleted from memory.

To delete another channel, repeat steps [3] and [4].

•

If you press ENTER again, the channel is memo-

•

rized again.

Added channel: Light blue.
Deleted channel: Light red.

5 Exit the channel setup mode

Press SETUP to return to TV mode.
NOTE: To confirm that channel(s) has been deleted

or added, press CHANNEL(CH.) K/L.

–14–

EN

0C28

TV OPERATION

to decrease
brightness

to decrease
contrast

to pale to brilliant

to green
to clear

to purple
to soft

to increase
brightness

to increase
contrast

BRIGHT

CONTRAST

COLOR
TINT
SHAPNESS

Arrow Button { Arrow Button B

WATCHING A TV PROGRAM

TV

1 Turn on the TV/DVD

Press POWER to turn on the TV/DVD.

2 Select the channel number

Press CHANNEL(CH.) K/L to select your desired
channel number, or press the number buttons.

Notes for using the number buttons on the remote
control:

You must proceed single-digit channel numbers

•

with a zero (Example: 02 ... 09).
When selecting cable channels which are higher

•

than 99, press +100 first, then press the last two
digits. (Example: to select channel 125, first press
+100, then press 2 and 5).

Remember:

¡If the TV/DVD is connected to a cable box or

satellite box, the TV/DVD must be on CH3 or
CH4, then the channel to be viewed must be select­ed on the cable box or satellite box.

3 Adjust sound

Press VOLUME(VOL.) XX/YYto
adjust the volume.

VOLUME 20

C C C C C C C C C C C C C C C C

NOTE:

If you press CHANNEL(CH.) K/L in the DVD

•

mode, you can change the TV channels.
When you turn off the TV/DVD in the DVD mode,

when you turn it on again, it will return to the TV
mode.

PICTURE CONTROL

TV

The TV/DVD’s picture controls – BRIGHT, CON­TRAST, COLOR, TINT and SHARPNESS – are

preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for your individual preference.

Make sure ...

TV/DVD power must be turned on.

•

1 Select “PICTURE CONTROL”

Press PICTURE on the remote control.

2 Select item you want to adjust

Press Arrow (K/L) until desired control is displayed.

BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS

3 Adjust the picture control

Press Arrow (s / B) to adjust to your desired level
within 5 seconds.

NOTE:

At step [3], the picture adjustment display will dis-

•

appear from the TV screen after about 5 seconds
unless you press any buttons, even though you may
not be finished. In this case, repeat from step [1].

BRIGHT

PP PP PP PP PP PP PP CC PP PP PP PP PP PP PP

–

+

DEGAUSSING

This television has a degaussing circuit that will clear
up color errors on the TV screen that are caused by
any excess magnetism which happens to get too
close to the TV. This circuit is designed to operate
once when the set is first plugged in. If minor color
errors are seen in some locations on the screen,
please unplug the TV for approximately 15 minutes.
When the TV is plugged back in, the degaussing cir­cuit will operate once to clear them up. Repeat this
procedure any time the TV screen is accidentally
magnetized, or when the TV is moved or relocated.

If there is a power failure of any kind, the unit will

•

retain its memory of the setting you have selected.

–15–

EN

0C28

SLEEP TIMER

TV

T

he Sleep Timer function enables you to shut off the power

without pressing POWER after a selected time period.

NOTE:

If the TV/DVD displays a black
box on the TV screen, this means
that the TV/DVD is set to the
TEXT mode. To clear screen, select
[CAPTION1], [CAPTION2] or
[OFF].

1 Set “SLEEP TIMER”

Press SLEEP on the remote control.
You may change the sleep time
with pressing SLEEP repeatedly.
The timer can be set up to 120 min­utes. Each time SLEEP is pressed,

SLEEP 120 MINUTE

the sleep time increases 30 minutes.

To cancel the sleep timer:

Press SLEEP repeatedly until “SLEEP 0 MINUTE”
is displayed.

NOTES:

When you disconnect the unit from the AC outlet,

•

or if you have a power failure, the sleep time will
be cancelled.

To view the time left for sleep timer press SLEEP

•

once when SLEEP display disappears. After 10
seconds, display will disappear again.

CLOSED CAPTION SYSTEM

TV

You can view specially labeled (cc) TV programs,
movies, news, etc. with either a dialogue caption or
text display.

CAPTION mode: By choosing the caption mode, you

can watch dramas, movies and news while captioning
the dialogues and the contents of news appears.

TEXT mode: By choosing the text mode, you can

watch half screen text information if you want.

1-2: You may view these captions or text information

by selecting either “1” or “2”. Caption “2” is used,
usually for a second language if available.

NOTE:

Not all programs are broadcast with closed captions.
Your television is designed to provide error free
closed captions from high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below:

Automobile ignition noise

•

Electric motor noise

•

Weak or snowy reception on TV screen

•

Multiplex signal reception displaying picture

•

ghosts.

Make sure ...

TV/DVD power must be turned on.

•

1 Select “CAPTION”

Press SETUP on the remote control.
Press

K or L to point to “CAP-

TION”.

CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]

B CAPTION [OFF]

2 Select your desired caption menu

Press ENTER until your desired
caption menu appears.

([CAPTION1], [CAPTION2],

CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]

B CAPTION [OFF]

[TEXT1] or [TEXT2])

3 Exit the caption setting mode

Press SETUP to return to TV mode.

TO CANCELTHE CLOSED CAPTION
SYSTEM

Repeat steps [1] and [2], select [OFF] using ENTER.
Press SETUP on the remote control to return to TV
mode.

WHEN THE CLOSED CAPTION MODE
IS ON

The On-Screen Display will disappear after 5 sec­onds.

This is also true when MUTE is pressed.

•

If there is a power failure of any kind, the unit will

•

retain its memory of this feature.

–16–

- TV SETUP -

- TV SETUP -

EN

0C28

V-CHIP SET UP

TV

V-CHIP enables parents to prevent their children
from watching inappropriate material on TV.

V-CHIP reads the ratings for programming (except
for news and sports programs, unedited movies on
premium cable channels, and Emergency Broadcast
System signals), then denies access to programming
if the program’s rating meets the limitations you
select. In this case, “PROTECTED PROGRAM by
...” message appears on the TV screen.

To block ratings, follow the steps below.

Programming may be rated by the Motion Picture

•

Association of America (MPAA) or according to
the Television Parental Guidelines. In order to
block any inappropriate programming, set your
limits in both places (MPAA RATING and TV
RATING).

TV RATING SET UP

Make sure ...

TV/DVD power must be turned on.

•

1 Select “V-CHIP SET UP”

Press SETUP on the remote control.
Press Arrow (

K/L) to point to “V-

CHIP SET UP”.
Then, press ENTER.

2 Input Access code

Press the number buttons to enter 4­digit access code. The default code
is 0000.

3 Select “TV RA TING”

Press Arrow (K/L) to point to “TV
RATING”.

Then, press ENTER.

4 Select your desired item

Press Arrow (K/L) to point to your
desired item.

Then, press ENTER to select
[BLOCK] or [VIEW].

- TV SETUP -

CHANNEL SET UP

B V-CHIP SET UP

LANGUAGE [ENGLISH]
CAPTION [OFF]

ACCESS CODE

_ _ _ _

– V-CHIP SET UP –

B TV RATING

MPAA RATING
CHANGE CODE

B TV–Y [VIEW]

TV–Y7 ( ) [VIEW]
TV–G [VIEW]
TV–PG( ) [VIEW]
TV–14 ( ) [VIEW]
TV–MA( ) [VIEW]

When you select a rating category and turn it

•

[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.

When you turn “TV-Y” to [VIEW], all ratings will

•

turn to [VIEW] automatically.

Selection Rating Category Explanations

TV-Y Appropriate for all children
TV-Y7 Appropriate for children seven and older
TV -G General Audience
TV-PG Parental Guidance suggested.
TV-14 Unsuitable for children under 14

TV-MA Mature audience only

When you select TV-Y7, TV-PG, TV-14, or TV-MA
and you press ENTER, the sub-ratings will appear
on the TV screen.

If you select the rating category (example: TV-PG)
and turn it [BLOCK] or [VIEW], the sub-ratings
(example: V for Violence) will turn [BLOCK] or
[VIEW] automatically.

You can set the sub-ratings to [BLOCK] or [VIEW]
individually when the rating category is set to
[BLOCK].

To set the sub-ratings individually, follow the steps
below.

When you select [TV-Y7]:

•

Press Arrow (K/L) to select
“FV” (Fantasy Violence).

TV–Y7 [BLOCK]

B FV [BLOCK]

Then, press ENTER to select
[BLOCK] or [VIEW].

When you select [TV-PG], [TV-14] or [TV-MA]:

•

Press Arrow (K/L) to select
“D”(Suggestive Dialog),
“L”(Coarse Language),
“S”(Sexual Situation), or

TV–PG [BLOCK]

B D[BLOCK]

L[BLOCK]
S[BLOCK]
V[BLOCK]

“V”(Violence). Then, press
ENTER to select [BLOCK] or [VIEW].

NOTE: When you select [TV-MA], “D” does not
appear on the TV screen.

The sub-ratings which set to

•

[BLOCK] appears next to the rat­ing category in the TV RATING

B TV–Y [VIEW]

TV–Y7 ( ) [VIEW]
TV–G [VIEW]
TV–PG (DLSV) [BLOCK]
TV–14 (DLSV ) [BLOCK]
TV–MA ( LSV) [BLOCK]

menu.

5 Exit the V-Chip setting mode

Press SETUP on the remote control to return to orig­inal mode.

–17–

EN

0C28

MPAA RATING SET UP

Make sure ...

TV/DVD power must be turned on.

•

1 Select “V-CHIP SET UP”

Press SETUP on the remote control.
Press Arrow (

CHIP SET UP”.
Then, press ENTER.

K/L) to point to “V-

- TV SETUP -

CHANNEL SET UP

B V-CHIP SET UP

LANGUAGE [ENGLISH]
CAPTION [OFF]

CHANGE ACCESS CODE

To change access code, follow the steps.

1 Select “V-CHIP SET UP”

Press SETUP on the remote con­trol.

Press Arrow (

K/L) to point to “V-

CHIP SET UP”.
Then, press ENTER.

B V-CHIP SET UP

- TV SETUP -

CHANNEL SET UP
LANGUAGE [ENGLISH]

CAPTION [OFF]

2 Enter 4-digit access code

Press the number buttons. The
default code is 0000.

3 Select “MPAA RATING”

Press Arrow (K/L) to point to

ACCESS CODE

_ _ _ _

– V-CHIP SET UP –
TV RATING

B MPAA RATING

CHANGE CODE

“MPAA RATING”.
Then, press ENTER.

Selection Rating Category Explanations

G General Audience
PG Parental Guidance suggested.
PG-13 Unsuitable for children under 13
R Restricted; under 17 requires accompa-

nying parent or adult guardian

NC-17 No one under 17 admitted
X Mature audience only

4 Select your desired item

Press Arrow (K/L) to point to your
desired item.

Then, press ENTER to select
[BLOCK] or [VIEW].

When you select the rating cate-

•

gory and turn it [BLOCK], the higher rating will
turn [BLOCK] automatically. Also, the lower rat­ing will turn [VIEW] automatically.

When you turn “G” to [VIEW], all ratings will turn

•

to [VIEW] automatically.

G[VIEW]
PG [VIEW]
PG–13 [VIEW]

B R[BLOCK]

NC–17 [BLOCK]
X[BLOCK]

2 Enter 4-digit access code

Press the number buttons. The

ACCESS CODE

_ _ _ _

default code is 0000.

3 Select “CHANGE CODE”

Press Arrow (K/L) to point to

– V-CHIP SET UP –
TV RATING

MPAA RATING

B CHANGE CODE

“CHANGE CODE".
Then, press ENTER.

4 Enter 4-digit access code

Press the number buttons to enter
your desired access code in the
NEW CODE space. Then, enter the
same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screen.

If you enter wrong code, repeat step 4, making

•

sure you enter the same new code exactly in the
confirm code space.

NEW CODE

_ _ _ _

CONFIRM CODE

_ _ _ _

5 Exit the V-Chip setting mode

Press SETUP on the remote control to return to orig­inal mode.

NOTE: IF YOU FORGET YOUR ACCESS

CODE NUMBER

If you unplug the power cord or if a power failure

•

occurs, your changed access code will be lost and
the code will return to default (0000). Change your
access code again as necessary.

5 Exit the V-Chip setting mode

Press SETUP on the remote control to return to origi­nal mode.

–18–

EN

0C28

ABOUT THE DISCS

Example

Title 1 Title 2

Chapter 1 Chapter 2 Chapter 1 Chapter 2Chapter 3 Chapter 4

Example

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

Example

Group 1 Group 2

Track 1 Track 2 Track 5 Track 6Track 3 Track 4

DVD SECTION

PLAYABLE DISCS

The following discs can be played back on this TV/DVD.

¡

DVD video

¡

DVD+R/RW*

¡

CD-R/RW*

* Depending on the types or the writing method of the

medium some discs can not be played.

• Some DVD-R/RW, DVD+R/RW, or CD-R/RW discs
made on personal computers, or on DVD recorders may
not be played back properly due to the factors such as
scratches, dirt or special properties of the disc.

• Discs made on personal computers may not be played
back properly due to the different environment or the
settings of the application you use. We recommend
always to use the standardized formatted discs.

This TV/DVD conforms to the NTSC color system. You
cannot play discs recorded in other color systems such as
PAL or SECAM.

¡Some discs include region codes as shown below.

¡

DVD-R/RW*

¡

Audio CD

¡

MP3*

DISC TYPES

[

]

DVD

Data on a DVD is divided into sections called "titles", and
then into subsections called "chapters", each of which is
given a title or chapter number. Playback conditions are
preset on some DVD video discs, and these playback con­ditions take priority over user operations on this
TV/DVD. If a function you selected does not run as
desired, refer to the manual accompanying the disc.

[

AUDIO CD

Data on an audio CD is divided into sections called
“tracks”, each of which is given a track number.

]

¡The number inside the symbol refers to a region of the

world, and a disc encoded in a specific region format
can only be played back on TV/DVD with the same
region code.

The following discs cannot be played back on this
TV/DVD.

¡

DVD with region codes other than 1 or ALL

¡

DVD-ROM

¡

DVD-RAM (Never play back, otherwise malfunc-

¡

CD-ROM

¡

VSD

¡

CDV (Only plays back the audio part.)

¡

CD-G (Only plays back the sound.)

¡

CD-I (Never play back, otherwise malfunction

¡

SACD

¡

Photo CD (Never play back, otherwise malfunc-

¡

Video CD (Never play back, otherwise malfunc-

Any other discs without compatibility indications.

tion may result.)

may result.)

tion may result.)

tion may result.)

[

]

MP3

Data on an MP3 is divided into sections called "groups",
and then into subsections called "tracks", each of which is
given a group or track number.

–19–

EN

0C28

PLAYING A DISC

BASIC PLAYBACK

DVD-V

Getting started

1 Press POWER.

¡The power will turn on.

2 Press OPEN/CLOSE to open disc loading

tray.

3 Place the chosen disc in the tray, with the

label facing up.

4 Press PLAY.

¡The tray will close automatically and playback will

then start from the first chapter or track of the disc.
If the playback does not start automatically, press
PLAY.

¡When you playback a DVD which features a title

menu, it may appear on the screen. In this case, refer
to “TITLE MENU”.

5 Press STOP to stop playback.

NOTES

¡When the DVD mode has been switched to the TV

mode, the DVD mode shuts down first and then a
TV picture and sound appears in about 4 seconds.
Similarly, when POWER is pressed to turn off in the
DVD mode, the mode shuts down first and then the
TV/DVD’s power is turned off.

¡A “prohibited icon” may appear at

the top-right on the TV screen dur­ing operation, warning that a pro­hibited operation has been encoun­tered by the DVD or the disc.

¡With DVDs that use titles for playback program sig-

nals, playback may start from the second title, or it
may skip these titles.

¡During the playback of a two layered disc, pictures

may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a mal­function.

MP3CD

GENERAL FEATURES

DVD may contain menus to navigate the disc and
access special features. Press appropriate numerical key
or use Arrow (L/K/s/B) to highlight your selection in
the DVD main menu and press ENTER to confirm.

NOTES

¡Select DVD mode by pressing SELECT on the

remote control. Then, press PLAY or OPEN/CLOSE
before you operate the DVD functions.

¡Unless stated, all operations described are based on

remote control use. Some operations can be carried
out using the menu bar on the TV screen.

DISC MENU

1 Press DISC MENU on the remote control.

¡The DVD main menu will appear.

2 If the feature is not available, symbol

may appear on the TV screen.

3 If disc menu is available on the disc, audio

language, subtitle options, chapters for the
title and other options will appear for selec­tion.

4 Press Arrow (L/K/s/B) to select an item,

and ENTER to confirm selection.

TITLE MENU

1 Press TITLE on the remote control.

¡The title menu will appear.

2 If the feature is not available, symbol

may appear on the TV screen.

3 Press Arrow (L/K/s/B) to select an item,

and ENTER to confirm selection.

RECALLING A MENU SCREEN
DURING PLAYBACK

For DVD-Vs

¡Press DISC MENU to display the DVD menu.
¡Press TITLE to display the title menu.

NOTE

¡Contents of menus and corresponding menu opera-

tions may vary between discs. Refer to the manual
accompanying the disc for details.

–20–

DVD-V

DVD-V

DVD-V

EN

0C28

RESUME

DVD-V

1 During playback, press STOP.

¡Resume message will appear on the TV screen.

2 Press PLAY, playback will resume from the

point at which playback was stopped.

¡To cancel resume, press STOP twice.
¡If the TV/DVD is turned off, resume function will be

cancelled.

¡For MP3, playback will resume from the beginning

of the track at which playback was stopped.

MP3CD

PAUSE

DVD-V

1 During playback, press PAUSE.

¡Playback will pause and sound will be muted.

2 To continue playback, press PLAY.

MP3CD

FAST FORWARD/REVERSE

SEARCH

DVD-V

1 During playback,press FWD g or REV h.

¡“g 1” or “h 1” appears on the screen.

2 To select another speed, repeat step1 until

your required speed appears on the screen.

¡For DVDs, fast forward/reverse search speed is dif-

ferent depending on the disc. Approximate speed is
1(×2), 2(×8), 3(×50) and 4(×100).

¡For audio CDs, approximate speed is ×16.
¡For MP3, approximate speed is ×8
¡When you use buttons on the main unit, press and hold

SKIPG / SEARCHg or SKIPH / SEARCHh
for a few seconds.

3 To return to normal playback, press PLAY.

MP3CD

SLOW FORWARD /

SLOW REVERSE

DVD-V

STEP BY STEP PLAYBACK

DVD-V

1 During playback, press PAUSE.

¡Playback will pause and sound will be muted.

2 The disc goes forward by one frame each

time PAUSE is pressed.

3 To exit step by step playback, press PLAY.

1 During playback, press PAUSE.
2 Press FWD g or REV h .

¡“ 1” or “ 1” appears on the screen.

3 To select another speed, repeat step2 until

your required speed appears on the screen.

¡Slow forward or reverse speed varies with the disc.

Approximate speed is 1(1/16), 2(1/8) and 3(1/2).

¡When you use buttons on the main unit, press and hold

SKIPG / SEARCHg or SKIPH / SEARCHh
for a few seconds.

4 To return to normal playback, press PLAY .

–21–

EN

0C28

SEARCH FUNCTION

TRACK SEARCH

MP3CD

There are three ways to begin playback on an Audio
CD and MP3 at a specific track.

Using the number buttons on the remote control

1 Press the number buttons to enter the

desired track number.

¡Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number

(eg. track 3, press 3).

¡To play track 26, press +10, 2, 6.

Using SEARCH MODE

1 Press SEARCH MODE.

¡The Track search display appears.

2 Within 30 seconds, select a desired track

number using the number buttons.

¡For single digits press 0 first.
¡Playback will start at the selected track.

Using SKIP

During playback, press SKIP G to move the next
track. Press it repeatedly to skip subsequent tracks.
Press SKIP H to go back to beginning of the current
track. Press it repeatedly to go to the previous tracks.

¡If SKIP is pressed while the playback is paused, the

playback will be paused again after skipping to the
next track.

NOTE

¡SKIP HGis not available when playback is

stopped.

HG

TIME SEARCH

DVD-V

1 During playback, press SEARCH MODE

three times (CD: twice) to display the Time
Search on the TV screen.

2 Within 30 seconds, enter a desired disc

time using the number buttons.

¡Playback will start at the specified time.
¡Press CLEAR to erase the incorrect input.
¡When there is no need to enter a number, “0”

appears automatically. For example, “ 0 : 0 - :
appears in the Time Search display if the total time
of the disc is less than 10 minutes.

CD

- -

MARKER SETUP SCREEN

DVD-V

Use markers to memorise your favorite places on a
disc.

1 Press SEARCH MODE four times (CD: three

times) during playback.

¡The display screen and Markers will appear on the

TV screen.

2 Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6,

7, 8, 9, or 10 and ensure that “
appears in the display.

- - - - :- - :- -

3 When you reach the desired point, press

ENTER.

¡The title or track and elapsed playing time will

appear in the TV screen.

CD

”

”

TITLE / CHAPTER SEARCH

DVD-V

1 Press SEARCH MODE once for the Chapter

search, twice for the Title search during
playback.

_/2

2 Enter the desired chapter/title number using

the number buttons.

¡Playback will start at the selected chapter or track.
¡Press CLEAR to erase the incorrect input.
¡For single digits press 0 first.

4 To return to the Marker later, press SEARCH

MODE four times (CD: three times) during
playback and Arrow (
desired marker, then press ENTER.

s / B) to choose the

NOTES

¡Opening the disc tray or turning off the power or

selecting AC at step 2 and pressing ENTER will
erase all Markers.

¡To clear a marker, using Arrow (s/ B

)

, position the
cursor on to the marker number to be cleared and
press CLEAR.

¡You can mark up to 10 points.

5 Press SEARCH MODE or RETURN to exit.

–22–

EN

0C28

SPECIAL PLAYBACK FUNCTION

REPEAT

REPEAT is available only during playback.

REPEAT TITLE / CHAPTER

DVD-V

To activate the repeat function, press REPEAT
during playback.

¡The repeat mode changes as described below every

time you press the button.

CHAPTER TITLE OFF

(current chapter repeat) (current title repeat)

NOTES

¡Repeat Title/Chapter is not available with some

scenes.

¡The REPEAT setting will be cleared when moving

to other title or chapter.

REPEA T TRACK

To activate the repeat function, press REPEAT
during playback.

¡The repeat mode changes as described below every

time you press the button.

TRACK ALL OFF

(current track repeat) (entire disc repeat)

NOTES

¡Repeat setting will be cleared when moving to other

track.

¡Repeat playback does not function during repeat A-

B playback.

REPEAT A-B

DVD-V

1 Press REPEAT A-B at your chosen starting

point.

¡ A- appears briefly on the TV screen.

2 Press REPEAT A-B again at your chosen

end point.

¡ A-B appears briefly on the TV screen, and the

repeat sequence begins.

(repeat

CD

(repeat

CD

off)

off)

PROGRAM

CD

You may determine the order in which tracks will play .

1 In stop mode, press MODE.

¡The PROGRAM screen will appear.

2 Press Arrow (▲/▼) to select a track, then

press ENTER.

¡Press CLEAR to erase the

TOTAL

most recently entered pro­gram.

3 Repeat step 2 until you have selected all the

tracks you want to play in the program.

4 Press PLAY to play the programmed tracks.

NOTES

¡While the program is being played back, the STOP

works as follows.

¡Press STOP once and then PLAY again, playback

will restart from the point where STOP was pressed.
(Program continued)

¡Press STOP twice and then PLAY again, playback will

restart from the track in the usual way. (Program cleared)

¡Up to 99 programs can be entered.
¡To erase all programs at once, select ALLCLEAR at

the bottom of the list at Step2.

¡If you like to repeat the current track in the program,

press REPEAT repeatedly until TRACK appears
during playback. If you like to repeat the entire pro­gram press REPEAT repeatedly until ALL
appears during playback.

RANDOM PLAYBACK

CD

This shuffles the playing order of tracks instead of
playback in sequence as recorded on the disc.

1 In stop mode, press MODE twice.

¡RANDOM screen appears.

RANDOM

CD-DA TOTAL 0:45:55

PLAY

RANDOM PROGRAM

- - no indication - -

3 To exit the sequence, press REPEAT A-B.

NOTES

¡The repeat A-B section can only be set within the cur-

rent title (for DVDs), or current track (for audio CDs).

¡Repeat A-B is not available with some scenes in DVD.
¡To cancel the A point which was set, press CLEAR.
¡Repeat A-B playback does not function during title,

chapter, track or all repeat playback.

2 Press PLAY to start random playback.

NOTE

¡If you like to repeat the current track in the random

selection, press REPEAT repeatedly until
TRACK appears during playback. If you like to
repeat the entire random selection press REPEAT
repeatedly until ALL appears during playback.

–23–

EN

0C28

3

PLAYING A MP3 DISC

MP3 PLAYBACK

MP3

When a CD with MP3 files is loaded into the
TV/DVD, press DISC MENU to display the MP3
menu on the TV screen.

1 In stop mode, press Arrow (K/L) to select

the desired group or
track.

¡If a group is selected, press

or ENTER to go on to the
track selection screen. Press
Arrow (K/L) to choose a

B

folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3

folder name 1

track, then press ENTER.

¡If a track is selected, press ENTER to start playing

tracks. Starting from the one you’ve just chosen the
subsequent tracks will be played.

¡Press TITLE to return to the first item.

2 Press STOP to stop playback.

NOTES

¡Folders are known as Groups; files are known as

Tracks.

¡MP3 files are accompanied by icon.
¡Maximum of 255 folders can be recognized.
¡Maximum of 512 files can be recognized.
¡Up to 8 hierarchies can be created.

This TV/DVD recommends the use of files recorded at
the below specifications:

¡Sampling frequency: 44.1kHz or 48kHz
¡Constant bit rate: 112kbps ~ 320kbps.

REPEAT

REPEAT is available only during playback.

PROGRAM

MP3

This feature allows you to program an MP3 disc to
play in a desired sequence.

1 In stop mode, press MODE.

¡The PROGRAM screen will appear.

2 Select a desired track using Arrow

(

K/L/s/B).Then, press ENTER.

¡Press B when you want to go to the next hierarchy.
¡Press s when you want to go back to the previous

hierarchy.

¡Press CLEAR to erase the most recently entered pro-

gram.

3 Repeat step 2 until you have selected all the

tracks you want to play in the program.

4 Press PLAY to start programmed playback.

NOTES

¡While the program is being played back, the STOP

works as follows.

¡Press STOP once and then PLAY again, playback

will restart from the point where STOP was pressed.
(Program continued)

¡Press STOP twice and then PLAY again, playback will

restart from the first track. (Program cleared)

¡To erase all programs at once, select ALLCLEAR at

the bottom of the list at Step2.

RANDOM PLAYBACK

MP3

1 In stop mode, press MODE twice.

¡RANDOM screen appears.

To activate the repeat function, press REPEAT
during playback.

¡The repeat mode changes as described below every

time you press the button.

TRACK ALL OFF

(current track
repeat)

GROUP

(current group
repeat)

(

entire disc

repeat)

NOTE

¡Repeat setting will be cleared when moving to other

track.

MP3

(repeat

off)

–24–

2 Press PLAY to start random playback.

EN

0C28

CHANGING THE SETTINGS

SUBTITLE LANGUAGE CAMERAANGLE

DVD-V

The TV/DVD allows you to select a language for sub­titles during DVD disc (if available) playback.

1 Press SUBTITLE during playback.
2 Press SUBTITLE repeatedly to select your

desired subtitle language.

¡The subtitle language will be displayed on the dis-

play bar at the top of the screen.

3 To turn off subtitles, press SUBTITLE

repeatedly until OFF appears.

NOTES

¡

Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)

¡If the desired language is not shown after pressing

SUBTITLE several times, the disc does not have
subtitles in that language.

¡If you choose a Language that has a 3 letter language

code, the code will be displayed every time you
change the Subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead.
(Refer to page 27.)

AUDIO LANGUAGE

DVD-V

The TV/DVD allows you to select a language during
DVD disc (if multi languages are available) playback.

1 Press AUDIO during playback.
2 Press AUDIO repeatedly to select your

desired language.

NOTE

¡Pressing AUDIO may not work on some DVDs with

multiple audio languages (e.g. DVDs which allow
audio language setting on the disc menu).

DVD-V

Some DVD discs contain scenes which have been shot
simultaneously from various angles. You can change
the camera angle when the ( ) icon appears on the
screen.

1 Press ANGLE during playback.

¡The selected angle will be displayed on the display

bar at the top of the screen.

2 Press ANGLE repeatedly to select your

desired angle.

BLACK LEVEL SETTING

DVD-V

Adjust the Black Level Settings to make the black
parts of the picture brighter.

1 Press MODE during playback.

OFF

2 Press ENTER to switch ON/OFF.

ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.

3 Press MODE twice or RETURN to exit.

NOTE

¡The setting will be saved even if the TV/DVD is

turned off.

VIRTUAL SURROUND

DVD-V

You can enjoy surround-sound effect over two speak­ers on this TV/DVD.

MP3CD

STEREO SOUND MODE

CD

1 Press AUDIO repeatedly during playback to

select between STEREO, L-CH or R-CH.

¡STEREO - both right and left channels are active

(stereo)
L-CH - only left channel is active
R-CH - only right channel is active

NOTE

¡If the Virtual Surround setting is ON, the sound

mode will be fixed to STEREO, and can not be
changed.

1 Press V.SURR once or MODE twice

(CD/MP3: once) during playback.

OFF

2 Press ENTER to set it 1 (Natural effect) or 2

(Emphasized effect) or OFF.

3 Press V.SURR or MODE or RETURN to exit.

NOTE (for CD play only)

¡Virtual Surround will not be effective if the sound

mode is set to something other than STEREO.

–25–

EN

0C28

THE ON-SCREEN INFORMATION

DVD-V

You can check the information about the current disc by pressing DISPLAY on the remote control.

For DVD-Vs

1 Press DISPLAY during playback to show

current Chapter.

¡The elapsed and remaining

playing time of the current
chapter will be displayed.

9/49 0:00:00 -0:03:30

For audio CDs

1 Press DISPLAY during playback to show the

current T rack.

¡The elapsed and remaining playing time of the cur-

rent track will be displayed.

2 Press DISPLAY again to show current Total

2 Press DISPLAY again to show current Title.

¡The elapsed and remaining playing time of the cur-

rent title will be displayed.

3 Press DISPLAY again.

¡The BIT RATE and the current repeat setting will be

displayed.

¡If you are playing a dual layered disc, the layer num-

ber will also be displayed (L0: Layer 0 is playing.
L1: Layer 1 is playing).

4 Press DISPLAY again to exit the display.

Track.

¡The elapsed and remaining playing time of the cur-

rent track will be displayed.

3 Press DISPLAY again to exit the display.

For MP3

1 Press DISPLAY during playback.

¡The name of the file currently in play will be dis-

played.

2 Press DISPLAY again to show the track

number, the elapsed time , the repeat status,
and the playback status at the top of the
screen.

¡ will be displayed when repeat play has been

selected.

T- indicates Track repeat
G - indicates Group (folder) repeat
A- indicates Disc repeat

MP3CD

3 Press DISPLAY again to exit the display.

–26–

EN

0C28

CHANGING THE DVD SETUP ITEMS

LANGUAGE SETTING

DVD-V

Language options are not available with some discs.

1 Press SETUP twice in STOP mode so that

the DVD SETUP menu appears.

¡ If the menu does not appear, press PLAY, STOP,

then SETUP twice.

SETUP

QUICK
CUSTOM
INITIALIZE

2 Press Arrow L to select “CUSTOM”,then

press ENTER.

¡CUSTOM mode will appear.

3 Press Arrow (K/L) to select “LANGUAGE”,

then press ENTER to confirm.

SETUP CUSTOM

LANGUAGE
DISPLAY
AUDIO
PARENTAL

4 Press Arrow (K/L) to select the next items,

then press ENTER.

AUDIO: Sets the audio language.
SUBTITLE: Sets the subtitle language.
DISC MENU: Sets the language for DVD menu.

5 Press Arrow (K/L) to select a setting, then

press ENTER.

¡If OTHER is selected on the AUDIO, SUBTITLE or

DISC MENU screen, press four-digit number to
enter the code for the desired language. (Refer to the
language code list.)

¡Only the languages supported by the disc can be

selected.

6 Press SETUP to exit.

NOTE

¡Language Setting for Audio and Subtitle is not avail-

able with some discs. Then use the AUDIO and the
SUBTITLE button. Details are on page 25.

TO CHANGE THE ON-SCREEN MENUS

You can access the TV SETUP menu by pressing
SETUP from the DVD mode. Refer to “Selecting the
Language” on page 13 to changing the on-screen
menus.

Language Code

Abkhazian 4748
Afar 4747
Afrikaans 4752
Albanian 6563
Amharic 4759
Arabic 4764
Armenian 5471
Assamese 4765
Aymara 4771
Azerbaijani 4772
Bashkir 4847
Basque 5167
Bengali;Bangla 4860
Bhutani 5072
Bihari 4854
Bislama 4855
Breton 4864
Bulgarian 4853
Burmese 5971
Byelorussian 4851

Cambodian 5759
Catalan 4947
Chinese [CHI] 7254
Corsican 4961
Croatian 5464
Czech 4965
Danish [DAN] 5047
Dutch [DUT] 6058
English [ENG] 5160
Esperanto 5161
Estonian 5166

Faroese 5261
Fiji 5256
Finnish [FIN] 5255
French [FRE] 5264
Frisian 5271
Galician 5358
Georgian 5747
German [GER] 5051
Greek [GRE] 5158
Greenlandic 5758
Guarani 5360
Gujarati 5367
Hausa 5447
Hebrew 5569
Hindi 5455
Hungarian [HUN] 5467

Icelandic [ICE] 5565
Indonesian 5560
Interlingua 5547
Interlingue 5551
Inupiak 5557
Irish [IRI] 5347
Italian [ITA] 5566
Japanese [JPN] 5647
Javanese 5669
Kannada 5760
Kashmiri 5765
Kazakh 5757
Kinyarwanda 6469
Kirghiz 5771
Kirundi 6460
Korean [KOR] 5761
Kurdish 5767

A-B

C-E

F-H

I-K

Language Code

Laothian 5861
Latin 5847
Latvian;Lettish 5868
Lingala 5860
Lithuanian 5866
Macedonian 5957
Malagasy 5953
Malay 5965
Malayalam 5958
Maltese 5966
Maori 5955
Marathi 5964
Moldavian 5961
Mongolian 5960
Nauru 6047
Nepali 6051
Norwegian [NOR] 6061

Occitan 6149
Oriya 6164
Oromo(Afan) 6159
Panjabi 6247
Pashto;Pushto 6265
Persian 5247
Polish 6258
Portuguese [POR] 6266
Quechua 6367
Rhaeto-Romance 6459
Romanian [RUM] 6461
Russian [RUS] 6467

Samoan 6559
Sangho 6553
Sanskrit 6547
Scots Gaelic 5350
Serbian 6564
Serbo-Croatian 6554
Sesotho 6566
Setswana 6660
Shona 6560
Sindhi 6550
Singhalese 6555
Siswat 6565
Slovak 6557
Slovenian 6558
Somali 6561
Spanish [SPA] 5165
Sundanese 6567
Swahili 6569
Swedish [SWE] 6568

Tagalog 6658
Tajik 6653
Tamil 6647
Tatar 6666
Telugu 6651
Thai 6654
Tibetan 4861
Tigrinya 6655
Tonga 6661
Tsonga 6665
Turkish [TUR] 6664
Turkmen 6657
Twi 6669

Ukrainian 6757
Urdu 6764
Uzbek 6772
Vietnamese 6855
Volapuk 6861
Welsh 4971
Wolof 6961
Xhosa 7054
Yiddish 5655
Yoruba 7161
Zulu 7267

L-N

O-R

S

T

U-Z

If you choose a Language that has a 3 letter language
code, the code will be displayed every time you change
the Audio or Subtitle language setting on page 25. If
you choose any other languages, ‘---’ will be displayed
instead. (3 letter language code is written in bracket.)

–27–

EN

0C28

DISPLAY SETTING

AUDIO SETTINGS

DVD-V

You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.

1 Press SETUP twice in STOP mode so that

the DVD SETUP menu appears.

¡ If the menu does not appear, press PLAY, STOP,

then SETUP twice.

SETUP

QUICK
CUSTOM
INITIALIZE

2 Press Arrow L to select “CUSTOM”,then

press ENTER.

¡CUSTOM mode will appear.

3 Press Arrow (K/L) to select “DISPLAY”,

then press ENTER to confirm.

SETUP CUSTOM

LANGUAGE
DISPLAY
AUDIO
PARENTAL

4 Press Arrow (K/L) to select the below

items, then press ENTER.

TV MODE:

¡Press Arrow (K/L) for an item selection, then press

ENTER.

¡Select 4:3 LETTER BOX for black bars to appear on

top and bottom of the screen.

¡Select 4:3 PAN & SCAN for a full height picture

with both sides trimmed.

¡The default setting is 4:3 LETTER BOX.

STILL MODE:

¡Press Arrow (K/L) for an item selection, then press

ENTER.

¡Select “AUTO” usually.
¡If you select “FIELD”, the picture in the still mode

will be stable.

¡If you select “FRAME”, the picture in the still mode

will be highly defined.

ANGLE ICON:

¡Press ENTER repeatedly to turn Angle icon ON or

OFF.

¡The default setting is ON.

AUTO POWER OFF:

¡Press ENTER repeatedly to turn Auto Power of f ON

or OFF.

¡

The default setting is ON and it will turn the TV/DVD
off automatically after 15 minutes of no use.

QUICK

DVD-V

Choose the appropriate Audio settings for your equip­ment as it only affects during the playback of DVD
discs.

1 Press SETUP twice in STOP mode so that

the DVD SETUP menu appears.

¡ If the menu does not appear, press PLAY, STOP,

then SETUP twice.

SETUP

QUICK
CUSTOM
INITIALIZE

2 Press Arrow L to select “CUSTOM”,then

press ENTER.

¡CUSTOM mode will appear.

3 Press Arrow (K/L) to select “AUDIO”, then

press ENTER to confirm.

SETUP CUSTOM

LANGUAGE
DISPLAY
AUDIO
PARENTAL

4 Press Arrow (K/L) to select the below

items, then press ENTER.

DRC (Dynamic Range Control):

¡To compress the range of the difference between

loud and soft sounds.

¡The default setting is ON.

DOWN SAMPLING:

¡Set to ON when outputting a 48 kHz signal.
¡The default setting is ON.

When playing disc with copyright Protection

¡If you select OFF, copyright protection will be acti-

vated and sound will be down sampled at 48kHz.

DOLBY DIGITAL:

QUICK

Set to ON when the unit is connected to an
amplifier/receiver with a Dolby Digital Decoder.

ON: Outputs a Dolby Digital signal
OFF: Converts the Dolby Digital signal into a PCM

(2 channel stereo)

¡The default setting is ON.

5 Press SETUP to exit.

5 Press SETUP to exit.

–28–

EN

0C28

PARENTAL CONTROL

DVD-V

Parental Control limits the disc viewing that exceed
your settings. This feature allows you to prevent discs
with objectionable scenes from being played by your
children.

PARENTAL LEVEL

Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc’s rat­ings exceed the level you select.

CONTROL LEVELS

¡

ALL

All parental lock is cancelled.

¡

Level 8

DVD software of any grade (adult/general/children)
can be played back.

¡

Levels 7 to 2

Only DVD software intended for general use and
children can be played back.

¡

Level 1

Only DVD software intended for children can be
played back, with those intended for adult and
general use is prohibited.

1 Press SETUP twice in STOP mode so that

the QUICK SETUP menu appears.

¡ If the menu does not appear, press PLAY, STOP,

then SETUP twice.

SETUP

QUICK
CUSTOM
INITIALIZE

2 Press Arrow L to select “CUSTOM”,then

press ENTER.

3 Press Arrow (K/L) to select “PARENTAL”,

then press ENTER.

SETUP CUSTOM

LANGUAGE
DISPLAY
AUDIO
PARENTAL

4 Enter your four-digit password then press

ENTER.

5 Press Arrow (K/L) to select PARENTAL

LEVEL, then press ENTER.

6 Press Arrow (K/L) to select the desired

level.

IF Y OU FORGET THE P ASSWORD

1 Press 4, 7, 3, 7 at step 4.Then enter your

new password.

¡Password will be cleared and parental level will be

set to ALL.

2 Follow Steps [5]-[7] again.

INITIALIZE

This allows you to return all selections of SETUP
(except for PARENTAL) to their default settings.

1 Press SETUP twice in STOP mode so that

the INITIALIZE menu appears.

2 Press Arrow (K/L) to select “INITIALIZE”,

then press ENTER.

3 Select “YES”, then press ENTER twice . All

the settings (except for “PARENTAL”) will be
cleared.

¡To cancel the initialization, select “NO”.

4 Press SETUP to exit.

7 Press SETUP to exit

NOTES

¡When doing this for the first time, enter any 4 digits.

(except for 4737) That number will be used as the
default password from the second time onward.

¡To change the password, press Arrow (K/L) to

select CHANGE at step 5, then press ENTER. Enter
the four-digit password, then press ENTER.

¡With some DVDs, it may be difficult to find if they

are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set for each DVD disc in question.

¡Record the password in case you forget it.

–29–

EN

0C28

TROUBLESHOOTING GUIDE

If the TV/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the
TV/DVD, consulting the following checklist.

Problem Corrective Action

No power

The TV/DVD does not respond to
the remote control.

TV Mode

Problem Corrective Action

No Picture or Sound

Bars On Screen

Picture Distorted or Blurred

Picture Rolls Vertically
Lines or Streaks in Picture

No Color

Poor Reception on Some Channels
Ghosts in Picture

Weak Picture

Sound OK, Picture Poor

Picture OK, Sound Poor • Try a new channel, if OK, then possible station trouble.

Different color marks on screen

Make sure the power plug is connected to an AC outlet.

•

Make sure the power is turned on.

•

Check if the power plug is connected to an AC outlet.

•

Check the batteries in the remote control.

•

Aim the remote control directly at the remote sensor. If necessary,

•

remove all the obstacles between the sensor and the remote.
You have to be within 23 feet of the TV/DVD.

•

Check if the correct mode is selected. If not switch the mode by

•

pressing SELECT on the remote control,whichever you need.

•

Try a new channel, if OK, then possible station trouble.

•

Make sure the power is turned on.

•

Press SELECT on the remote control to select TV mode. Then try
other TV feature.

•

Is antenna or cable connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

If outside antenna is being used, check for broken wire.

•

Check for local interference

•

Check incoming CATV cable for loose or bad connections.

•

Try a new channel, if OK, then possible station trouble.

• If outside antenna is being used, check for broken wire.

•

Check incoming CATV cable for loose or bad connections.

•

Try a new channel, if OK, then possible station trouble.

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

•

Check incoming CATV cable for loose or bad connections.

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna or cable connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust COLOR control.

•

Check incoming CATV cable for loose or bad connections.

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna or cable connected to terminal on the back of the set?

• If outside antenna is being used, check for broken wire.

•

Check for local interference.

•

Check incoming CATV cable for loose or bad connections.

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna or cable connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Adjust CONTRAST & BRIGHT control.

•

Check incoming CATV cable for loose or bad connections.

•

Try a new channel, if OK, then possible station trouble.

•

Is antenna or cable connected to terminal on the back of the set?

•

If outside antenna is being used, check for broken wire.

•

Check for local interference.

•

Adjust CONTRAST & BRIGHT control.

• Check for local interference.

•

Magnetism from nearby unsealeded speakers or appliances might
affect the color of the TV picture. Move the TV/DVD away from the
speakers or appliances. The TV/DVD can repair itself automatically
by unplugging the TV/DVD power cord, and then plug it in again 30
minutes or so later.

–30–

EN

0C28

Closed Caption Problem Possible Remedy

My TV/DVD is showing captions • You are watching a live broadcast and spelling errors made by the
that are misspelled. • closed captioning production company may pass through uncorrected.

• A prerecorded program will not show any misspelled words because

• of the time available for editing the captions.

My TV/DVD will not show the text • Captions that are delayed a few seconds behind the actual dialogue
in its entirety or there is a delay of • are common for live broadcast. Most captioning production companies
what is being said. • can display a dialogue to a maximum of 220 words per minute. If a

• dialogue exceeds that rate, selective editing is used to insure that the

• captions remain up-to-date with the current TV screen dialogue.

My captions are scrambled with • Interference caused by building, power lines, thunderstorms, etc.
white boxes on the TV screen. • may cause scrambled or incomplete captions to appear.

My program guide listed a TV show
as being closed captioned but none • actual program so that additional advertising time can be given.
of the captions were displayed. • Since the decoder cannot read the compressed information,

My TV/DVD screen shows a black • You are in the TEXT mode. Select CAPTION mode or CAPTION
box on certain channels. • [OFF].

• Broadcasters may at times use a time compression process to the

• captions will be lost.

DVD Mode

Problem Corrective Action

No picture • Insert a correct video disc that plays on this TV/DVD.

• Press SELECT on the remote control to select DVD mode. Next,
press PLAY or OPEN/CLOSE. Then, try other DVD feature.

Disc cannot be played

No sound

No DTS audio is output
Distorted picture

Audio or subtitle language • The selected language is not available for audio or subtitles on the
does not match the set up DVD disc.

The camera angle cannot be • The DVD disc does not contain sequences recorded from different
changed camera angles. This is not a malfunction

Audio or subtitle language cannot • The DVD disc does not contain audio source or subtitles in the
be changed selected language. This is not a malfunction.

“Prohibited icon” appears on the • That operation is prohibited by the TV/DVD or the disc.
screen, prohibiting an operation This is not a malfunction.
CD sound dropout • Scratched disc. Replace the disc with unscratched one.
No CD reproduction • Dirty disc. Replace or cleaw disc.
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction

• Insert the disc.

• Clean the disc.

• Place the disc correctly, with the label side up.

• Cancel the parental lock or change the control level.

• Connect the audio cables firmly.

• Turn the power of the audio component on.

• Correct the audio output settings.

• Correct the input settings on the audio component.

• This TV/DVD does not support DTS audio. This is not a malfunction.

• There are some cases where pictures may be slightly distorted, which
are not a sign of a malfunction.

• Although pictures may stop for a moment, this is not a malfunction.

This is not a malfunction

NOTES:

Some functions are not available in specific modes, but this is not a malfunction. Read the description in

•

this Owner’s Manual for details on correct operations.
Playback from a desired track and random playback are not available during program playback.

•

–31–

EN

0C28

MAINTENANCE

RecordableRecordable

ReWritableReWritable

CABINET CLEANING

Wipe the front panel and other exterior surfaces of

•

the TV/DVD with a soft cloth immersed in luke­warm water and wrung dry.

Never use a solvent or alcohol. Do not spray insec-

•

ticide liquid near the TV/DVD. Such chemicals
may cause damage and discoloration to the
exposed surfaces.

SERVICING

Should your TV/DVD become inoperative, do not

•

try to correct the problem by yourself. There are no
user-serviceable parts inside. Turn off, unplug the
power cord, and please call our help line at 1-800­488-1222, to locate an Authorized Service Center.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

If the TV/DVD still does not perform properly when it is operated while referring to the relevant sections and to

•

"TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult
your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

DISC HANDLING

Use discs which have the following logos on them.

•

(Optical audio digital discs.)

Handle the discs so that fingerprints and dust do

•

not adhere to the surfaces of the discs.

To clean-off, use a soft cloth.

•

Do not use a hard cloth since this will mar the disc.

•

Wipe the disc in a straight line from center to edge.

•

Never wipe with a circular motion.

•

Do not use detergent or abrasive cleaning agents.

•

Always store the disc in its protective case when it

•

is not used.

–32–

EN

0C28

SPECIFICATIONS

GENERAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS

TV

Sound output: 2 speakers, 1W, 8 ohm

CRT : 20 inch in-line gun,

90˚ deflection tube

Television system: NTSC-M

TV Standard
Closed caption system:
Channel coverage:

VHF: 2 ~ 13
UHF: 14 ~ 69
CATV: 2 ~13, A~ W,

Tuning System: 181 channel

Channel access: Direct access keyboard,

§15.119/FCC

W+1 ~ W+84,

A-5 ~ A-1, 5A

frequency synthesized

tuning system

programmable

scan and up/down

DVD

Discs: DVD video, Audio CD
Output signal format: NTSC color

OTHER SPECIFICATIONS

Terminals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced (F-type)
Video input: RCA connector [ 1
Audio L/R input: RCA connector [ 2
Headphone: 1/8” stereo (3.5 mm)
Coaxial digital
audio output
(DVD, CD, MP3
Audio only): One pin jack,

500m Vpp (75 ohm)

Remote control: Digital encoded

infrared light system

Operating
temperature: 5°C to 40°C

(41°F~104°F)

Power requirements: AC 120V, 60Hz
Power consumption

(Maximum) : 80W
Dimensions : H:20-3/16”(514mm)

W:20-3/16”(512mm)

D:19-13/16”(503mm)

Weight : 49.6lbs(21.0kg)

Designs and specifications are subject to change without notice.

•

If there is a discrepancy between languages, the default language will be English.

•

–33–

EN

0C28

INDICE

■ CONTROLES DE OPERACIÓN Y FUNCIONES. . . . . 34

PANEL FRONTAL DEL TELEVISOR/DVD . . . . . . . . . . 34

MANDO ADISTANCIA. . . . . . . . . . . . . . . . . . . . . . . . . 34

VISTA POTERIOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 35

■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 35

CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 35

CONEXIÓN ATOMAS DE ENTRADA EXTERNA. . . . 36

CONEXIÓN A UN AMPLIFICADOR EQUIPADO
CON TOMAS DE ENTRADA DIGITAL, PLATINA

MD O PLATINA DAT (Para DVD) . . . . . . . . . . . . . . . . . 36

CONEXCIONA UN DECODIFICADOR DOLBY
DIGITAL (Para DVD)

TV SECTION

■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 37

SELECCIÓN DE IDIOMA . . . . . . . . . . . . . . . . . . . . . . . 37

AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

DVD SECTION

■ REPRODUCCIÓN DE UN DVD DE VÍDEO O UN

CD DE AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

REPRODUCCION BASICA . . . . . . . . . . . . . . . . . . . . . . 38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

CONTROLES DE

OPERACIÓN Y FUNCIONES

PANEL FRONTAL DEL

TELEVISOR/DVD

Consulte la figura 1 de la página 8

MANDO A DISTANCIA

Consulte la figura 2 de la página 8

VISTA POSTERIOR

Consulte la figura 3 de la página 9

1. Bandeja de carga del disco

2.Toma de entrada VIDEO

Conecte aquí la toma de salida de vídeo de una
videocámara o de una videograbadora.

3.Tomas de entrada AUDIO L/R

Conecte aquí las tomas de salida de audio de una
videocámara o de una videograbadora.

4. Botón POWER

Púlselo para conectar y desconectar la alimentación.

5. Botones VOLUME o/p(VOL.m/n)

Púlselos para controlar el nivel del volumen para el
DVD y el televisor.

6. Botones CHANNEL o/p(CH.o/p)

Púlselo para seleccionar el canal memorizado.
Púlselo para cambiar a un modo de televisor cuando
esta en el modo de DVD.

Ventanilla del sensor del mando a distancia

7.

8. Botón STOP

Detiene la operación del disco.

9. Botón SKIP H

Reproduce desde el inicio del capítulo o canción actual.

Botón SEARCH (REV) h (panel delantero)

Durante la reproducción o en el modo de pausa,
mantenga presionado el botón durante unos segundos
para cambiar la velocidad de reproducción hacia atrás.

10. Botón PLAY

Inicia la reproducción del contenido del disco.
Púlselo para cambiar a un modo de DVD cuando esta
en el modo de televisor.

11. Botón SKIP G

Reproduce desde el inicio del siguiente capítulo o
canción.

Botón SEARCH (FWD) g (panel delantero)

Durante la reproducción o en el modo de pausa,
mantenga presionado el botón durante unos segundos
para cambiar la velocidad de reproducción en avance.

12. Botón PAUSE

Hace una pausa en la operación del disco.

13. Botón OPEN/CLOSE

Púlselo para insertar discos en la bandeja o retirarlos
de ella.

14.Toma HEADPHONE

Para conectar auriculares (no suministrados) y
escuchar en privado.

15. Botón MODE

Activa el modo de reproducción programada o el
modo de reproducción aleatoria cuand se reproducen
CDs o MP3.

16. Botones de números
Modo del televisor:

Pulse dos dígitos para tener acceso directamente al
canal deseado.
Recuerde pulsar "0" antes de elegir un canal de un
solo dígito.

Botón +100

Púlselo para seleccionar canales de televisión por
cable cuyo número sea igual o superior al 100.

Modo DVD:

Púlselo para introducir el número deseado.

Botón +10

Púlselo para introducir los números deseados cuyo
número sea igual o superior al 10.

17. Botón SLEEP

Pulse el botón SLEEP para visualizar el temporizador
para dormir y activar la función. La hora de apagado
puede determinarse por el número de veces que usted
pulsa el botón. (0, 30, 60, 90 o 120 minutos)

18. Botón REV h

Presione para ver la imagena en DVD en retroceso
rápido. Presione PAUSE y presione este botón para
empezar la reproducción en cámara lenta. Presione
repetidamente este botón para cambiar la velocidad en
avance de la cámara lenta.

Botón FWD g

Presione para avanzar rápidamente en el disco.
Presione PAUSE y presione este botón para empezar
la reproducción en cámara lenta. Presione
repetidamente este botón para cambiar la velocidad
de avance de la cámara lenta.

19. Botón V .SURR

Púlselo para activar/desactivar el envolvente virtual.

20. Botón SETUP

Púlselo para activar o salir del modo de menús de
televisor o preparación de DVD.

–34–

ES

0C28

21. Botón TITLE

Visualiza el menú de títulos.

22. Botón CLEAR

Repone un ajuste.

23. Botón DISPLAY
Modo del televisor:

Púlselo para visualizar el número del canal en la
pantalla. Si lo pulsa de nuevo, el número del canal
desaparecerá.

Modo de DVD:

Visualiza el estado actual en la pantalla del televisor
con fines de comprobación.

24. Botón SEARCH MODE

Púlselo para localizar un punto deseado.

25. Botón AUDIO

Púlselo para seleccionar un idioma de audio o un
modo de sonido deseado.

26. Botón SUBTITLE

Púlselo para seleccionar un idioma de subtítulos
deseado.

27. Botón REPEAT

Repite la reproducción del disco, título, capítulo o
pista actual.

28. Botón ANGLE

Púlselo para cambiar el ángulo de la cámara y ver,
desde un ángulo diferente, la secuencia que está
siendo reproducida.

29. Botón A-B REPEAT

Repite la reproducción de una sección seleccionada.

30. Botón RETURN

Vuelve a la operación anterior en el modo de
instalación del DVD.

31. Botón ENTER

Púlselo para establecer un ajuste.

32. Botones de flechas
Modo de televisor:

Púlselo para seleccionar un modo de ajuste desde el
menú que aparece en la pantalla del televisor.
Púlselo para seleccionar o ajustar desde un menú
particular.

Modo de DVD:

Se utiliza cuando se hacen ajustes mientras se
observa la visualización en una pantalla de televisor.

33. Botón DISC MENU

Visualiza menús en el DVD.

34. Botón SELECT

Púlselo para cambiar a un modo de televisor, modo
de entrada externa o modo de DVD.

NOTA: Cuando seleccione el modo DVD con
este botón, pulse primero PLAY u
OPEN/CLOSE. De lo contrario, las funciones del
DVD no se activarán.

35. Botón MUTE

Pulse el botón MUTE para apagar el sonido de un
programa de TV. (La visualización del nivel del
sonido cambia de ROJO CLARO a AZULCLARO.)
Pulse de nuevo el botón MUTE o el botón VOL m o
n para restaurar el sonido.

36. Botón PICTURE

Presione para entrar en el modo de ajuste de imagen.

37. Cable de alimentaciónConéctelo a una toma de

CA convencional (120 V/60 Hz).

NOTA: Retire el cable de alimentación del gancho

38.Toma de salida de audio digital COAXIAL
(DVD Audio solamente)

Conéctela a la entrada digital de un amplificador o
decodificador externo.

39.Toma de entrada ANT.

Conéctela a una antena, sistema de televisión por
cable o sistema de satélite.

para evitar romperlo antes de conectarlo a una
toma de CA convencional.

PARA INSERTAR LAS PILAS

1) Abra la cubierta del compartimiento de las pilas
empujando la cubierta del mando a distancia en el
sentido de la flecha.

2) Inserte 2 pilas "AA" en el compartimiento de las
pilas, en el sentido indicado por las marcas de
polaridad (+/-).

3) Vuelva a poner la cubierta.

NOTAS:

No mezcle pilas alcalinas y de manganeso.

•

No mezcle pilas viejas y nuevas.

•

PREPARACIÓN PARA LA

UTILIZACIÓN

CONEXIONES DE

ANTENA/CABLE

Consulte la figura 4 de la página 10

Nota para el instalador de sistemas CATV

Esta nota tiene la finalidad de llamar la atención del
instalador de sistemas CATV para que tenga en
cuenta el Artículo 820-40 del NEC, el cual
proporciona consejos para hacer una conexión a
tierra apropiada y, en particular, especifica que la
tierra del cable deberá estar conectada al sistema de
puesta a tierra del edificio, tan cerca del punto de
entrada del cable como sea posible.

NOTA:

Antes de enchufar la antena a la toma ANT.IN del
televisor/DVD, compruebe que la clavija no esté
doblada. Si esta doblada, póngala derecha como se
muestra en la ilustración, y luego conéctela en la
toma ANT.IN del televisor/DVD.

Clavija doblada

Cable

Clavija

(Necesita enderezarse)

ANTENA COMBINADA DE VHF/UHF

La antena combinada de VHF/UHF de 75 ohmios
puede conectarse al terminal ANT.

(Clavija derecha)

–35–

ES

0C28

ANTENA SEPARADAS DE VHF/UHF

En algunas zonas será necesario utilizar una antena
exterior.

TELEVICION POR CABLE SIN CAJA
DE CONVERTIDOR / DECODIFICADOR

Utilice esta conexión si su sistema de televisión por
cable se conecta directamente a su televisor/DVD sin
una caja de convertidor. Utilice el mando a distancia
del televisor/DVD para seleccionar los canales.

NOTA:

Cuando conecte una videograbadora monofónica

•

(otra fuente) a este televisor/DVD, conecte la toma
de salida de audio de la videograbadora
monofónica (otra fuente) a la toma AUDIO L de
este televisor/DVD. El audio saldrá igualmente por
los canales izquierdo y derecho.

Consulte la figura 5 de la página 11

TELEVICION POR CABLE CON CAJA
DE CONVERTIDOR/DECODIFICADOR
O CAJA DE SATRLITE

Si su compañía de televisión por cable le suministra
una caja de convertidor, o si usted utiliza un sistema
de satélite, usted podrá utilizar la conexión básica
mostrada aquí.
La selección de los canales deberá hacerse con la caja
de convertidor o con la caja de satélite. Esto significa
que los canales no se podrán cambiar utilizando el
mando a distancia del televisor/DVD.

PARA VER UN CANAL
CODIFICADO/DECODIFICADO

1) Ponga el selector de canales del televisor/DVD
en la posición del canal de salida de la caja de
convertidor de televisión por cable o de la caja de
satélite. (Ej., CH3)

2) Seleccione el canal que va a ver en su caja de

convertidor de televisión por cable o caja de
satélite.

CONEXIÓN A TOMAS DE

ENTRADA EXTERNA

Cuando vea un programa grabado en otra fuente
(videograbadora o videocámara), utilice las tomas de
entrada de audio/vídeo de la parte delantera del
televisor/DVD.
Conecte las tomas de salida de audio/vídeo de otra

fuente a las tomas AUDIO L/R y VIDEO de este
televisor/DVD. Luego pulse SELECT hasta que
aparezca "AUX" en la pantalla.

CONEXIÓN A UN

AMPLIFICADOR EQUIPADO

CON TOMAS DE ENTRADA

DIGITAL, PLATINA MD O
PLATINA DAT (Para DVD)

Utilice un cable digital coaxial de audio de venta en
el comercio especializado para hacer las conexiones
de audio.

Consulte la figura 6 de la página 11

NOTAS:

La fuente de audio de un disco en un formato de

•

sonido ambiental Dolby Digital de 5,1 canales no
se puede grabar como sonido digital mediante una
platina MD o DAT.

Asegúrese de desconectar la alimentación de todos

•

los componentes antes de conectar otro
componente.

Consulte los manuales del propietario de los

•

componentes que va a conectar al televisor/DVD.
Ponga DOLBY DIGITAL en OFF para la salida de

•

audio en el modo de preparación. La reproducción
en un televisor/DVD utilizando ajustes incorrectos
puede causar distorsión de ruido, y también se
pueden dañar los altavoces. (Consulte la página 28
para poner DOLBY DIGITAL en OFF.)

–36–

ES

0C28

CONEXCIONA UN

DECODIFICADOR DOLBY

DIGITAL (Para DVD)

Si utiliza este televisor/DVD para reproducir un disco
DVD en un formato de sonido ambiental Dolby
Digital de 5,1 canales, el televisor/DVD dará salida a
un flujo de datos DOLBY DIGITAL desde su toma
de salida de audio digital COAXIAL. Conectando el
reproductor a un decodificador Dolby Digital, usted
podrá disfrutar de un ambiente más convincente y
real, con un sonido ambiental potente y de alta
calidad similar al de los cines.
Utilice cables digitales coaxiales de audio disponibles
en el comercio especializado para hacer las
conexiones de audio.

Consulte la figura 7 de la página 12

NOTAS:

Asegúrese de desconectar la alimentación de todos

•

los componentes del sistema antes de conector a
otro componente.

Consulte los manuales del propietario de los

•

componentes que vaya a conectar al televisor/DVD.
Si conecta un decodificador Dolby Digital, ponga

•

DOLBY DIGITAL en ON para la salida de audio
en el modo de preparación. (Consulte la página 28
para poner DOLBY DIGITAL en ON.)

A menos que se haga la conexión a un

•

decodificador Dolby Digital , ponga DOLBY
DIGITAL en OFF para la salida de audio en el
modo de preparación. La reproducción en el
televisor/DVD utilizando ajustes incorrectos puede
generar distorsión de ruido, y también puede
estropear los altavoces.

TV SECTION

PREPARACIÓN PARA LA

UTILIZACIÓN

SELECCIÓN DE IDIOMA

TV

1 Enchufe el cordón de alimentación

del televisor/DVD

Enchufe el cordón de alimentación del
televisor/DVD en una toma de CA están­dar.

NOTA:

Si aparecen algunas cifras en la esquina de la pan-

•

talla, pulse el botón POWER sin desenchufar el
cordón de alimentación.

Asegúrese de que ...

Pulse el botón POWER para encender el televi-

•

sor/DVD.

NOTA: Esta función afecta sólo el idioma en el menú
de la pantalla y no la fuente de audio.

2 Seleccione “LANGUAGE”

Pulse el botón SETUP en el mando
a distancia.

Pulse el botón K o L para señalar
“LANGUAGE”.

3

Seleccione “ENGLISH”,“ESPAÑOL” o “FRANÇAIS”

Seleccione “ENGLISH”, “ESPAÑOL” o
“FRANÇAIS” con el botón ENTER.

- TV SETUP -

CHANNEL SET UP
V-CHIP SET UP

B LANGUAGE [ENGLISH]

CAPTION [OFF]

Fabricado bajo licencia de Dolby
Laboratories.“Dolby” y el símbolo de la D
doble son marcas de fábrica de Dolby
Laboratories.

4 Salga del modo de idioma

Pulse el botón SETUP en el mando a distancia para
volver al modo del televisor.

NOTA: Si, por alguna razón, el menú está en español
o francés, pulse el botón SETUP en el mando a dis­tancia, pulse el botón K para señalar el “IDIOMA
(ESPAÑOL)” o “LANGAGE (FRANÇAIS)”, a con­tinuación, pulse el botón ENTER y pulse el botón
SETUP en el mando a distancia.

–37–

ES

0C28

AJUSTE DE CANAL

DVD SECTION

TV

Puede programar el sintonizador para buscar todos
los canales que recibe en su localidad.

NOTA: El canal preparado NO es necesario cuando
esté conectado a una caja de cable o caja de satélite.
Sólo tiene que seleccionar con el selector de canal del
televisor/videograbadora al canal de salida de la caja
de cabe o caja de satélite (por ejemplo el canal CH3).
Seleccione el canal a ver en la caja de cable o caja de
satélite.

Asegúrese de que ...

Pulse el botón POWER para encender el televi-

•

sor/DVD.

1 Seleccione “AJUSTE DE CANAL”

Pulse el botón SETUP en el mando
a distancia.

Pulse el botón K o L para señalar
“AJUSTE DE CANAL”.

A continuación, pulse el botón
ENTER.

– M E N U –

B AJUSTE DE CANAL

AJUSTE DE V-CHIP
IDIOMA [ESPAÑOL]`
TITULO [OFF]

2 Empiece el prefijado automático

Pulse el botón K o L para señalar
“AUTOPROGRAMACION DE
CA”.

A continuación, pulse el botón
ENTER.

El sintonizador busca y memoriza
todos los canales activos en su localidad.

AJUSTE DE CANAL

–

AGREGAR/BORRAR (CATV)

B AUTOPROGRAMACION DE CA.

–

3 Después de buscar

El sintonizador se detiene en el canal memorizado
más bajo.

Cuando se activa AUTOPROGRAMACION DE

•

CA, donde no hay entrada de señal del televisor,
aparecerá “NO HAY SEÑAL DE TV” en la pan­talla después de terminar la búsqueda de canales.

El televisor/DVD puede reconocer los canales de

•

TV para que sean canales de TV de antena de cable
con las condiciones de recepción. En este caso,
pruebe nuevamente con el prefijado automático en
las condiciones de recepción fina.

REPRODUCCIÓN DE UN

DVD DE VÍDEO O UN CD

DE AUDIO

REPRODUCCION BASICA

MP3CDDVD-V

Para empezar

¡Conecte el interruptor del amplificador y otros

equipos, si fuera necesario.

1 Pulse el boton POWER.

¡La alimentación se conectará.

2 Pulse el botón OPEN/CLOSE.

¡La bandeja de carga del disco se abrirá.

3 Ponga el dlsco en la bandeja con el lado

de la eliguta hacia arriba.

4 Pulse el botón PLAY.

¡La bandeja se cerrará automáticamente y la

reproducción empezará luego desde el primer
capítulo o pista del disco. Si la reproducción no
empieza automáticamente, pulse PLAY.

¡Cuando reproduzca un DVD que tenga grabado un

menú de títulos, el menú aparecerá en la pantalla.

5

Pulse el botón STOP para detener la repro­ducción.

–38–

ES

0C28

MEMO

–39–

ES

0C28

Registered Trademark / TM Trademark /

SM

Service Mark of Sears, Roebuck and Co.

Marca Registrada /

TM

Marca de Fábrica / SM Marca de Servicio de Sears, Roebuck and Co.

MC

Marque de commerce / MD Marque déposée de Sears, Roebuck and Co. © Sears, Roebuck and Co.

Get it fixed, at your home or ours!

Our Home

For repair of carry-in items like vacuums, lawn equipment,

and electronics, call or go on-line for the location of your nearest

Sears Parts & Repair Center.

1-800-488-1222

Call anytime, day or night (U.S.A. only)

www.sears.com

To purchase a protection agreement on a product serviced by Sears:

1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)

Para pedir servicio de reparación

a domicilio, y para ordenar piezas:

1-888-SU-HOGAR

SM

(1-888-784-6427)

Au Canada pour service en français:

1-800-LE-FOYER

MC

(1-800-533-6937)

www.sears.ca

Your Home

For repair- in your home -of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold it!

For the replacement parts, accessories and

owner's manuals that you need to do-it-yourself.

For Sears professional installation of home appliances

and items like garage door openers and water heaters.

1-800-4-MY-HOME

R

(1-800-469-4663)

Call anytime, day or night

(U.S.A. and Canada)

www.sears.com www.sears.ca

R
R

If this (product) experiences any failure due to a def ect in material or workmanship within 90 da ys from the date
of purchase, return it to your nearest Sears Parts & Repair Center, and Sears will repair it free of charge.

After 90 days and until one (1) year from the date of purchase, Sears will replace defective parts free of charge.
You pay for labor.

After 90 days and until two (2) years from the date of purchase, Sears will replace the Picture Tube if it is defec­tive.You pay for labor.

This warranty applies only if this (product) is used for private household purposes.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

90 Day Full Warranty

Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
For the location of a Sears Service Center in your area : 1-800-488-1222

Printed in China 0EMN02492

T9005UF ★★★★★

documentation manual, user maintenance, brochure, user reference, pdf manual

This file has been downloaded from:

User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes..

Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide,

manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product,