FUNAI LC225SL9 User Manual

NEED HELP?

PLEASE CALL TOLL FREE!

1-800-968-3429

OR VISIT OUR WEB SITE AT

www.sylvania-ce.com

22” Digital LCD TV

Owner’s Manual

LC225SL9

WATCHING TVINTRODUCTION PREPARATION INITIAL SETTING OPTIONAL SETTING

HIGH-DEFINITION TELEVISION

TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.

TROUBLESHOOTING

INFORMATION

© 2008 Funai Electric Co., Ltd.

NTRODUCTION

I

The model and serial numbers of this unit may be found on the cabinet.
You should record and retain those numbers for future reference.

Model No.:

Serial No.:

Precautions5

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS

TO RAIN OR MOISTURE.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear or bottom of the cabinet.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
apparatus’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the apparatus.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacture’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing
on it. A falling unit can cause serious injury or even death.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause
harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to
operate this apparatus if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to
radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the apparatus and receiver.

3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

2

EN

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.
Make sure to leave a space of 2.8 inches (7cm) or more around this apparatus.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the instructions.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

•
Do not remove this unit cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to this

•
unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center.
Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.

•
Do not put your fingers or objects into the unit.

•

LOCATION AND HANDLING

The openings should not be blocked by placing the unit on a bed, sofa, carpet, rug, or other similar surface.

•
Do not install the unit near or over a radiator or heat register.

•
Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

•
Avoid a place with drastic temperature changes.

•
Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.

•
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is
placed too close to them. In this case, please ensure enough space between the external devices and the unit.
Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

•

NOTE ABOUT RECYCLING

This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance

•
with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local

•
regulations concerning chemical wastes.

INTRODUCTION

PREPARATION

INITIAL SETTING

WATCHING TV INFORMATION

OPTIONAL SETTING TROUBLESHOOTING

EN

3

NTRODUCTION

I

Supplied Accessories5

owner’s manual
(1EMN23139)

If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free

•
customer support line found on the cover of this manual.
Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters).

•
Contact your local electronics store for these items.

Attaching the Stand

5

You must attach the stand to the unit to display upright. Be sure the front and rear of the stand match the proper direction.

remote control
(NF015UD)

batteries
(AA x 2)

Spread a thick and soft cloth over a table. Place the main

1

unit face down onto it.
Make sure not to damage the screen.

To Remove the Stand from this Unit

Grip the levers on the bottom stand and remove the stand
from the unit slowly.
Be careful not to drop the stand when you remove it.

Insert the stand all the way to the main unit slowly until

2

it clicks.
Make sure not to put the AC cord between the stand
and the unit.

f

f

r

r

o

o

n

n

t

t

s

s

i

i

d

d

e

e

lever

Note:

• When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall,
resulting in injuries as well as damage to the unit.

• Make sure to use a table which can support the weight of this unit and is larger than this unit.

• Make sure the table is in a stable location.

Symbols Used in this Manual

5

The following is the description for the symbols used in this manual.
Description refers to:

: Digital TV operation

DTV

•

If neither symbol appears under the function heading, operation is applicable to both.

Trademark Information

5

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

•
Licensing LLC.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby

•
Laboratories.
Product that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.

•

: Analog TV operation

TV

4

EN

INTRODUCTION

Features5

•

DTV/TV/CATV

-

You can use your remote control to select
channels which are broadcast in digital format and
conventional analog format. Also, cable subscribers
can access their cable TV channels.

•

Information Display (DTV only)

-

You can display the title, contents and other
information of the current DTV program on the TV
screen.

•

Auto Channel Scan

-

This unit automatically scans and memorizes
channels available in your area, eliminating difficult
setup procedures.

•

V-chip

-

This feature allows you to block children’s access to
inappropriate programs.

•

Closed Caption Decoder

-

Built-in closed caption decoder displays text for
closed caption supported programs.

•

MTS/SAP Tuner

-

Audio can be selected from the remote control.

•

Auto Shut Off Function

-

If there is no signal input from the antenna terminal
and no operation for 15 minutes, the unit will turn
itself off automatically.

•

Sleep Timer

-

This feature will automatically turned off the power
of the unit at a specific time.

•

Choices for On-screen Language

-

Select your on-screen language:
English, Spanish or French.

•

Stereo Sound Function

•

PLL Frequency Synthesized Tuning

-

Provides free and easy channel selection and lets
you tune directly to any channel using the channel
number buttons on the remote control.

•

HDMI Input

•

PC Input

•

Component Video Input

•

S-video Input

•

AV Input

•

Digital Audio Coaxial Output

Contents5

INTRODUCTION

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Trademark Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Buttons on the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

PREPARATION

Basic Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

INITIAL SETTING

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

WATCHING TV

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Still Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Switching Each Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Switching Audio Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Screen Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

TV Screen Display Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

OPTIONAL SETTING

Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Manual Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Antenna Confirmation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

DTV Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

CC Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

V-chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

PC Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

HDMI Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

TROUBLESHOOTING

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

INFORMATION

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Cable Channel Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Other Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back cover

© 2008 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in

any storage medium, in any form or for any purpose without the express prior written consent of Funai.
Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the
obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written
consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this
manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein.
Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property
rights to the fullest extent of the law.

EN

PREPARATION

INITIAL SETTING

WATCHING TV INFORMATION

OPTIONAL SETTING TROUBLESHOOTING

5

NTRODUCTION

I

Buttons on the Remote Control5

CH RETURN

1. POWER (p. 13)

Press to turn the unit on and off.

2. Number buttons (p. 15)

•

Press to select channels.

- (hyphen)

Press to shift the minor channel

•
from the major channel.

3. SETUP (p. 13)

Press to display the main menu.

4. s / B / K / L (p. 13)

Press to move left/ right/ up/

down through the items.

5. ENTER (p. 13)

Press to confirm your selection.

6. BACK (p. 17)

Press to return to the previous

menu operation.

7. CH RETURN (p. 15)

Press to return to the previously

viewed channel.

8. VOL. X / Y (p. 15)

Press to adjust the volume.

9. MUTE (p. 15)

Press to turn the sound on and off.

10. INPUT SELECT (p. 16)

Press to switch the input modes.

11. SLEEP (p. 15)

Press to activate the sleep timer.

12. AUDIO (p. 16)

Digital Mode (DTV)

Press to select the audio

•
language.

Analog Mode (TV)

Press to select the audio mode.

•

13. STILL (p. 16)

Press to pause screen image.

14. SCREEN MODE (p. 18)

Press to select aspect ratio
available for the TV screen.

15. INFO (p. 17)

Digital Mode (DTV)

Press to display the channel

•
information, signal type and TV
setting.

Analog Mode (TV)

Press to display the channel

•
number, signal type and TV
setting.

External Input Mode

Press to display the external

•
input modes, signal type and TV
setting.

16. CH K / L (p. 15)

Press to select channels and the
external input modes.

Installing the Batteries

5

Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.

Battery Precautions:

• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries; they can overheat and rupture.

6

EN

INTRODUCTION

Control Panel5

side of this unit

Press to turn the unit on and off.

2. INPUT SELECT/ENTER (p. 16)

Press to switch the input modes.

•

1

2

Press to confirm your selection.

•

3. CHANNEL K / L (p. 15)

PREPARATION

Press to select channels or move up/down through the

1. POWER y (p. 13)

CHANNEL

3

main menu items.

VOLUME

4. VOLUME X / Y (p. 15)

Press to adjust the volume or move right (X) / left (Y)

4

through the main menu items.

INITIAL SETTING

5. SETUP (p. 13)

5

Press to display the main menu.

6. infrared sensor window

Receives infrared rays transmitted from the remote

6

control.

7

7. power on indicator

8

Lights up when power is on.

WATCHING TV INFORMATION

8. stand by indicator

Lights up in standby mode.

Rear Panel5

OPTIONAL SETTING TROUBLESHOOTING

1. PC input jack (p. 12)

VGA cable connection for PC.

2. HDMI input jack (p. 9)

1

HDMI connection for HDMI devices.

3. antenna input jack (p. 8)
RF coaxial cable connection for your antenna or

2

cable/satellite box.

4. AC power cord

Connect to a standard AC outlet to supply power to
this unit.

5. component video and audio input jack (p. 10)

3

RCA component video and RCA audio connection for
external devices.

6. video input jack (p. 11)

RCA video connection for external devices.

7. audio input jack (p. 10)

4

RCA audio connection for external devices.

5

8. audio input jack (p. 9)

RCA audio connection for DVI devices.

6

(For HDMI1 input jack only)

7

9. audio input jack for PC connection (p. 12)

Mini-plug audio cable connection for PC.

8

10. coaxial digital audio output jack (p. 11)

Coaxial digital audio connection for a decoder or an
audio receiver.

11. S-video input jack (p. 10)

9

10

S-video connection for external devices.

VIDEOS-VIDEO

PC-IN

AUDIO COAXIAL

PrPbY

VIDEO 2

VIDEO 1

AUDIOCOMPONENT

R

L

AUDIO

LR

HDMI-IN

AUDIO

LR

11

EN

7

REPARATION

P

Cables not included.

Please purchase the necessary cables at your local store.

Basic Connection

5

This section describes how to connect the unit to an antenna, cable/satellite box, etc.

Note:

• Be sure your antenna or other device is connected properly before plugging in the power cord.

[Antenna Connection]

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

e.g.)

VHF / UHF
antenna

RF coaxial cable

or

cable TV

company

Once connections are completed, turn on the unit and begin initial setup.

*

Channel scanning is necessary for the unit to memorize all available channels in your area.
(Refer to “Initial Setup” on page 13.)

rear of this unit

Note:

• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the
unit.

• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than
settop versions.

• To switch your reception source easily between antenna and cable, install an antenna selector.

• If you connect to the cable system directly, contact the CATV installer.

[Connection to Cable Box or Satellite Box]

Use an RF coaxial cable to connect the antenna input jack of the unit to the antenna output jack of the cable/satellite box.

e.g.)

satellite dish

ANT OUTANT IN

or

cable TV

company

*

Required cables and connecting methods differ depending on the cable/satellite box.
For more information, please contact your cable/satellite provider.

RF coaxial cable

STEREO
PCM

cable/satellite box

RF coaxial cable

rear of this unit

8

EN

Cables not included.

Please purchase the necessary cables at your local store.

External Device Connection

5

[HDMI Connection]

HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through
a single cable. It ensures that the content sent from the source to the unit is of the highest possible resolution.
Use an HDMI cable to connect the unit to external video devices equipped with HDMI output jack.

e.g.)

rear of this unit

PREPARATION

INITIAL SETTING

HDMI cable

TITLE 5
CHAPTER 15
REPEAT A-B

HDMI OUT

DVD player with the HDMI output jack

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals.

• This unit accepts only 2 channel audio signal (LPCM).

• You need to select “PCM” for the digital audio output of the device connected or check the HDMI audio setting.
There may be no audio output if you select “Bitstream”, etc.

• This unit only accepts signals compliant with EIA861.

[HDMI-DVI Connection]

Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack.

e.g.)

cable box or satellite box
with the DVI output jack

DVI OUT

STEREO
PCM

AUDIO OUT

RL

HDMI-DVI
conversion cable

RCA audio cable

To HDMI1 input jack only

rear of this unit

WATCHING TVINTRODUCTION

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

• HDMI-DVI connection requires separate RCA audio connection as well.

• Audio signals are converted from digital to analog for this connection.

• DVI does not display 480i image that is not compliant with EIA/CEA-861/861B.

VIDEO 2

AUDIOCOMPONENT

R

PrPbY

L

VIDEO 1

AUDIO

VIDEOS-VIDEO

LR

HDMI-IN

PC-IN

AUDIO

COAXIAL

AUDIO

LR

9

EN

REPARATION

(red)

(blue)

(green)

P

Cables not included.

Please purchase the necessary cables at your local store.

[Component Video Connection]

RCA component video connection offers better picture quality for video devices connected to the unit.
Use an RCA component video cable to connect the unit to external video devices equipped with component video
output jacks.
If you connect to the unit’s component video input jacks, connect an RCA audio cable to the audio L/R jacks of VIDEO2.

e.g.)

RCA audio cable

RCA component video cable

(red)

(blue)

(green)

TITLE 5
CHAPTER 15
REPEAT A-B

DVD player with
the component video output jacks

AUDIO OUT

RL

COMPONENT VIDEO OUT

Pr/CrPb/CbY

(red)(blue)(green)

PbY

S-VIDEO

PC-IN

AUDIO COAXIAL

VIDEO 2

Pr

VIDEO 1

VIDEO

rear of this unit

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

[S-video Connection]

S-video connection offers good picture quality for video devices connected to the unit.
Use an S-video cable to connect the unit to external video devices equipped with S-video output jack.
If you connect to the unit’s S-video input jack, connect an RCA audio cable to the audio L/R jacks of VIDEO1.

e.g.)

RCA audio cable

S-video cable

TITLE 5
CHAPTER 15
REPEAT A-B

DVD player with
the S-video output jack

AUDIO OUT

S-VIDEO

OUT

RL

VIDEO 2

PbY

Pr

VIDEO 1

VIDEO

S-VIDEO

PC-IN

AUDIO COAXIAL

rear of this unit

Note:

• If you connect to the S-video input jack and the video input jack at the same time, the S-video connection will have priority.

AUDIOCOMPONENT

LR

AUDIO

R

L

HDMI-IN

AUDIO

R

L

AUDIOCOMPONENT

R

L

AUDIO

R

L

HDMI-IN
AUDIO

R

L

10

EN

Cables not included.

Please purchase the necessary cables at your local store.

[Video Connection]

RCA video connection offers standard picture quality for video devices connected to the unit.
Use an RCA video cable to connect the unit to external video devices equipped with video output jack.
If you connect to the unit’s video input jack, connect an RCA audio cable to the audio L/R jacks of VIDEO 1.
When the audio jack of the video device is monaural, connect an RCA audio cable to the audio L input jack.

e.g.)

RCA audio cable

RCA video cable

camcorder video game

AUDIO OUT

STEREO

STAND-BY

VCR

VIDEO

RL

OUT

PbY

S-VIDEO

PC-IN

AUDIO COAXIAL

VIDEO 2

Pr

VIDEO 1

VIDEO

rear of this unit

Note:

• If you connect to the S-video input jack and the video input jack at the same time, the S-video connection will have priority.

[Digital Audio Output Connection (for digital broadcasting only)]

If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital
broadcasting sound.
Use a digital audio coaxial cable to connect the unit to external digital audio devices.

AUDIOCOMPONENT

LR

AUDIO

R

L

HDMI-IN

AUDIO

R

L

PREPARATION

INITIAL SETTING

WATCHING TVINTRODUCTION

OPTIONAL SETTING

TROUBLESHOOTING

e.g.)

Dolby Digital

decoder

DIGITAL AUDIO

COAXIAL IN

digital audio coaxial cable

VIDEO 2

AUDIOCOMPONENT

R

PrPbY

L

VIDEO 1

AUDIO

VIDEOS-VIDEO

LR

HDMI-IN

PC-IN

AUDIO

COAXIAL

AUDIO

LR

rear of this unit

INFORMATION

11

EN

REPARATION

P

Cables not included.

Please purchase the necessary cables at your local store.

[PC Connection]

This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer
monitor.

e.g.)

VGA cable should be
with ferrite core.

personal computer

VGA cable

mini-plug audio cable

VIDEOS-VIDEO

PC-IN

AUDIO COAXIAL

VIDEO 2

PrPbY

VIDEO 1

AUDIOCOMPONENT

R

L

AUDIO

LR

HDMI-IN

AUDIO

LR

rear of this unit

The following signals can be displayed:

Format Resolution V. Frequency Format Resolution V. Frequency

VGA 640 x 480 60Hz

SVGA 800 x 600 60Hz

XGA 1024 x 768 60Hz

WXGA

1280 x 768 60Hz

1360 x 768 60Hz

Other formats or non-standard signals will not be displayed correctly.

Note:

• Please purchase the VGA cable that has a ferrite core.

• The following operations may reduce noise.

- Attach a ferrite core to the AC power cord of your PC.

- Unplug the AC power cord and use the built-in battery of your PC.

12

EN

NITIAL SETTING

I

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

5

Initial Setup

This section will guide you through the unit’s initial setting which includes
selecting a language for your on-screen menu and auto channel scan,
which automatically scans and memorizes viewable channels.

Before you begin:

Make sure if the unit is connected to antenna or cables.

After making all the necessary connections, press

1

[POWER] to turn on the unit.

This operation may take a few moments.

•

Use [Cursor K / L] to select the on-screen language

2

from the choices on the right side of the TV screen.
(English / Español / Français)

Initial Setup

Initial Setup

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

ENTER

Select Enter Exit

•

“Initial Setup” menu on step 3 will be displayed in the
selected language after you press [ENTER].

English

Español

Français

SETUP

Note:

• If you connect the cable system directly, contact the CATV
installer.

• If you press [POWER] or [SETUP] during auto channel
scan, this setting will be canceled.

• The initial auto channel scan function can be executed
for either “Air” or “Cable” only once. When you change the
connection (Air/Cable), set auto channel scan again. (Refer
to page 14.)

• You can cancel or exit the initial auto channel scan menu
by pressing [SETUP].

• If there is no signal input from the antenna terminal and
no operation for several seconds after you turn on the unit,
“Helpful Hints” appears. Follow the instructions listed on
the TV screen.

2-2

No channel is registered.
Press and hold "ENTER" key on the remote control for 3 seconds.
Contact support hotline provided on manual or back of unit.

Sin canal registrado.
Pulse durante 3 segundos la tecla "ENTER" en el control remoto.
Llame teléfono de apoyo en manual o atrás de TV.

Pas de chaîne consign.
Enfoncez "ENTER" 3 secondes sur la télécommande.
Contacter numero d'urgence dans manuel ou arrière appareil.

Main Menu

5

This section describes the overview of the main menu displayed when you
press [SETUP]. For more details, see the reference page for each item.
The main menu consists of the function setting items below.

Press [SETUP].

INITIAL SETTING

WATCHING TVINTRODUCTION PREPARATION

OPTIONAL SETTING

Use [Cursor K / L] to select “Air” for TV channels or

3

“Cable” for CATV channels, then press [ENTER].

Initial Setup

Initial Setup

Make sure the antenna is connected to "ANT.IN" jack.
Select the destination of "ANT.IN" jack.

Air

Or

Cable

ENTER

Select Enter Exit

•

Scanning and memorizing of channels start

ANT.IN

BACK

Back

automatically.

Initial Setup

Initial Setup

Now the system is scanning for channels,please wait.

5%

Analog channels 1ch

Digital channels 0ch

•

When the scanning and memorizing of channels are
completed, the lowest memorized channel will be
displayed.

TROUBLESHOOTING

EXIT

Air
Cable

To exit settings.

PICTURE

You can adjust the picture quality.

SETUP

(Refer to “Picture Adjustment” on page 22.)

SOUND

INFORMATION

You can adjust the sound quality.
(Refer to “Sound Adjustment” on page 23.)

CHANNEL

You can automatically scan the viewable channels and
remove the undesired channels.
(Refer to “Auto Channel Scan” on page 14.)

DETAIL

You can change the display format for closed caption,

SETUP

Exit

which displays the dialogue of a TV program or other
information across the TV screen.
(Refer to “Closed Caption” on page 24.)
You can set the viewing limitations.
(Refer to “V-chip” on page 28.)
You can adjust the position, stability and clarity of the
PC screen.
(Refer to “PC Settings” on page 31.)
You can select the sound input for the HDMI1 input
jack if your unit is connected to an HDMI or DVI device.
(Refer to “HDMI Audio” on page 32.)

13

EN

NITIAL SETTING

I

LANGUAGE

You can change the language (English, Spanish,
French) displayed on the main menu.
(Refer to “Language Selection” on page 14.)

Auto Channel Scan

5

If you switch wires (e.g., between antenna and CATV) or if you move the
unit to a different area after the initial setting, or if you restore the DTV
channel you deleted, you will need to perform auto channel scan.

Before you begin:

Make sure if the unit is connected to antenna or cables.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “CHANNEL” , then press

2

[ENTER].

Use [Cursor K / L] to select “Autoscan”, then press

3

[ENTER].

Note:

• After setting “Auto Channel Scan”, using [CH K / L] on the
remote control skips unavailable programs automatically.

• If you connect the cable system directly, contact the CATV
installer.

• If you press [POWER] or [SETUP] during auto channel
scan, the setting will be canceled.

• Channel settings will be saved even if the power fails.

• If you need the English menus instead of the Spanish or
French menus you are having, press [SETUP]. Use

[Cursor K
[ENTER]. Use [Cursor K / L] to select “English”, then press
[ENTER]. Press [SETUP] to exit the main menu.

• With regard only to the digital channel, even after the
scanning is completed if you unplug the AC power cord
before turning off the unit by pressing [POWER], the
channel setting may be lost.

Language Selection

5

You can choose English, Spanish or French as your on-screen language.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “LANGUAGE”, then press

2

[ENTER].

/ L] to select “IDIOMA” or “LANGUE”, then press

Channel

Channel

Autoscan
Channel List
Manual Register
Antenna

Use [Cursor K / L] to select an appropriate option, then
press [ENTER].

Autoscan

Autoscan

Autoscan will rescan all channels.
This may take a while to complete.

Select the destination of "ANT.IN" jack.

Air

Or

Cable

When aerial antenna is connected, select “Air”.

•
When connected to CATV, select “Cable”.

•
Scanning and memorizing of channels start

•

ANT.IN

automatically.

Now the system is scanning for channels, please wait.

72%

Analog channels 10ch

Digital channels 6ch

SETUP

Exit

Back
Air
Cable
Cable

1 hour

Use [Cursor K / L] to select “English”, “Español” or

3

“Français”, then press [ENTER].

Language

Language

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

Press [SETUP] to exit.

4

English

Español

Français

14

When the scanning and memorizing are completed,

•
the lowest memorized channel will be displayed.

EN

ATCHING TV

W

Channel Selection

5

Select channels by using [CH K / L] or [the Number buttons].

Use

[CH K / L] or [the Number buttons] to select the

memorized channels.

or

Using [the Number buttons]

TV

When selecting analog channel 12

-

DTV

When selecting digital channel 12-1

-

•

Be sure to press [–] before entering the minor
channel number.

•

Press [CH RETURN] to return to the previously
viewed channel.

•

Only [the Number buttons] can be used to select
the non-memorized channels.

About digital TV broadcasting:

With its high definition broadcast, digital broadcasting
far surpasses analog broadcasting in both its picture
and sound quality.

What is the minor channel?

By using high compression technology, digital
broadcasting offers a service that enables multiple
signals to send simultaneously. Therefore, you can
select more than one program per major channel since
digital broadcasting technology distinguishes between
multiple channels broadcast by a single network.

NTSC (analog mode)

: change automatically
: change manually by using [CH

CH4

[Air Time]

18:00

18:30

19:00

19:30

20:00

20:30

major channel

ATSC (digital mode)

No signal

CH4

CH4

(high definition TV)

CH4

CH4-1

CH4

No signal

CH4

CH4-1

minor channel

K / L]

Note:

• “No Signal” will appear on the TV screen after the minor
channel broadcast is over.

• “Audio only program“ message will appear on the TV
screen, when you receive only sound signal.

No signal

No signal

CH4-2

CH4-2

Volume Adjustment

5

This section describes how to adjust the volume. The mute function, which
turns the sound off and on, is also described.

/

X

Use [VOL.

The volume bar will be displayed at the bottom of

•
the TV screen when adjusting the volume.
The volume bar will automatically disappear in a few

•
seconds.

Press [MUTE ] to turn off and on the sound.

“Mute” is displayed on the TV screen for a few

•
seconds.

Press [MUTE ] again or use [VOL.
the original volume.

Sleep Timer

5

The sleep timer can be set to automatically turn off the unit after an
incremental period of time.

Press [SLEEP] to set the sleep timer.

1

Sleep timer display appears on the TV screen.

•

Press [SLEEP] repeatedly to change the amount of time

2

until shut off.

You can set your unit to turn off after a set period of

•
time (from 30 to 120 minutes).
Each press of [SLEEP] will increase the time by 30

•
minutes.
After setup, the sleep timer display can be called up

•
for checking by pressing [SLEEP].

Y

] to adjust the audio volume.

Volume 20

Mute

Sleep

Sleep

/

X

Y

] to recover

Off

120min.

To Cancel the Sleep Timer

Press [SLEEP] repeatedly until “Sleep Off” is displayed
on the TV screen.

Note:

• The sleep timer display will automatically disappear in a
few seconds.

• When you disconnect the unit from the AC outlet or when
a power failure occurs, the sleep timer setting will be
canceled.

EN

INTRODUCTION

PREPARATION INITIAL SETTING OPTIONAL SETTING

WATCHING TV

TROUBLESHOOTING

INFORMATION

15

ATCHING TV

W

Still Mode

5

You can pause the image shown on the TV screen.

Switching Audio Mode

5

This section describes how to switch the audio in the analog mode and how
to switch the audio language in the digital mode.

Press

5

You can easily switch with the remote control to the DTV (ATSC) and TV
(NTSC) or to access external devices when they are connected to the unit.

[STILL] to pause the image shown on the TV

screen.

Still

The sound output will not be paused.

•
If no signal is detected or protected signal is received

•
during still mode, the image remains paused and the
sound output will be muted.
The still function will be released after 5 minutes.

•

To cancel still mode, press any button except [POWER].

Switching Each Input Mode

Press [INPUT SELECT] or [CH K] repeatedly to cycle
through the input modes.

DTV/TV channel

Video1

Video2

HDMI1

TV

Press [AUDIO] to display the currently selected

1

audio mode. While receiving an MTS broadcast,
press repeatedly to cycle through the available audio
channel.

6

When all audio are available

When stereo and monaural audio are available

When SAP and monaural audio are available

When only monaural audio is available

STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio

DTV

Press [AUDIO] to display the currently selected

1

language and the number of available languages.

SAP / STEREO SAP / MONO

SAP / STEREO

MONO / STEREO MONO / STEREO

SAP / MONO SAP / MONO

(Cannot be switched)

SAP / STEREO

MONO

16

HDMI2

PC

Pressing [CH L] reverses the direction of the input

•
modes.
To use the video or S-video input jack on the unit,

•
select “Video1”.
To use the component video input jacks on the unit,

•
select “Video2”.
To use the HDMI1 input jack on the unit, select

•
“HDMI1”.
To use the HDMI2 input jack on the unit, select

•
“HDMI2”.
To use the PC input jack on the unit, select “PC”.

•

EN

6-1

Press [AUDIO] repeatedly to cycle through the

2

available audio languages.

Available languages differ depending on the

•
broadcast. “Other” is displayed when the audio
language cannot be acquired, or the acquired
languages are other than English, Spanish or French.

English 1/3

Note:

• Pressing [AUDIO] does not control external audio devices.

• The information display will automatically disappear in a
few seconds.

Screen Information

5

You can display the currently selected channel or other information such as
the audio mode on the TV screen.

TV

In the analog mode, the current channel number and the audio mode are
displayed.

DTV

In the digital mode, the detailed broadcasting information for the current
channel such as program title, program guides are displayed.

INTRODUCTION

PREPARATION INITIAL SETTING OPTIONAL SETTING

Press [INFO].

6

SAP / STEREO

480i

480i

The current channel number, audio mode, type of

•
resolutions for video signal, TV aspect ratio, CC and
TV program rating are displayed on the top-right
corner of the TV screen.
To clear the display, press [INFO] again. You can also

•
press [BACK].

SD

SD

TV-PG DLSV

4:3

4:3

CC

CC

Press [INFO] to display the details of the currently
selected program.

Broadcasting Information

The following information is displayed.

1 program title
2 broadcast station
3 program guide

(The program guide added to broadcasting
information is displayed. Maximum display of 4
lines.)

4 channel number
5 audio language

(Refer to “Switching Audio Mode” on page 16.)

6 effective scanning lines and scan mode
7 program format
8 program aspect ratio
9 program rating
10 CC (not available if CC is set to “Off”)

1

A Day of Memories

A Day of Memories

A quarter-century ago,which may now qualify as the
good old days of newspapering,run-of-paper sales
accounted for 80 percent of the industry's advertising
revenues.Department stores and supermarket were

39

24

KABC

KABC

English 1/2

1080i

1080i

TV-PG DLSV

6-1

16:9HDHD

16:9

CC

10

WATCHING TV

TROUBLESHOOTING

5

CC

6, 7, 8

Note:

• When the program guide consists of more than 4 lines, use
[Cursor K/ L] to scroll.

• “No description provided.” is displayed when the program
guide is not provided.

• While the program guide is displayed, the closed caption
function is interrupted.

• In external input mode, the following screen is displayed;
e.g.) When an external device is connected to VIDEO1 input

jack.

Video1

480iSDSD

480i

TV-PG DLSV

• The information display will automatically disappear in
1 minute.

CC

CC

INFORMATION

17

EN

ATCHING TV

W

TV Screen Display Mode

5

3-5 types of display modes can be selected when the unit receives 4:3 / 16:9
video signal or PC input signal.

Press [SCREEN MODE ] repeatedly to switch the TV
aspect ratio.

For 4:3 video signal

Wide

(digital mode)

Sidebar

Wide

(

analog /

external input mode

Full

Sidebar

Select to display a 4:3 picture at its original size.
The black bars appear on the left and right sides of the
screen.

Full

Select to display a 4:3 picture to fill the screen.

Cinema

Select to reduce the black bars on top and bottom.

Wide

Digital mode:

Select to display a 4:3 picture to fill the screen and
shrink “FULL” picture horizontally.

Analog / external input mode:

Select to display a 4:3 picture to fill the screen and
stretch “FULL” picture horizontally.

Cinema

)

For 16:9 video signal

Full

Side Cut

Zoom

Full

Select to display a 16:9 picture to fill the screen.

Side Cut

Select to display a 16:9 picture to fill the screen and
stretch “FULL” picture horizontally. The left and right
sides of the picture will be cropped out.

Zoom

Select to enlarge a 16:9 picture without distorting the
aspect ratio.

Cinema

Select to reduce the black bars on top and bottom.

Expand

Select to reduce the black bars on the left and right
sides.

Expand

Cinema

18

EN

INTRODUCTION

PREPARATION INITIAL SETTING OPTIONAL SETTING

For PC input signal

Normal

A

*

Normal

B

*

Full

Dot By Dot

A

Normal

Select to display a vertically stretched picture without
distorting the aspect ratio.
The black bars appear on the left and right sides of the
screen.

Normal

Select to display a horizontally stretched picture
without distorting the aspect ratio.
The black bars appear on the top and bottom sides of
the screen.

Type of display Format Resolution

*

*

Normal

Normal

B

VGA 640 x 480

A

*

B

*

SVGA 800 x 600

XGA 1,024 x 768

WXGA

1,280 x 768
1,360 x 768

Full

Select to display a picture to fill the screen.

Dot By Dot

Select to display a picture in its original size.

Note:

• You may not switch the display mode depending on the
program or resolution.

• You can change the screen resolution on your PC.

WATCHING TV

TROUBLESHOOTING

INFORMATION

EN

19

PTIONAL SETTING

O

Channel List

5

The channel list function lets you remove undesired channels from the
channel registration list.

Manual Register

5

The manual register function lets you add the channels that were not added
by the auto channel scan due to the reception condition at the initial setting.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “CHANNEL”, then press

2

[ENTER].

Use [Cursor K / L] to select “Channel List”, then press

3

[ENTER].

Channel

Channel

Autoscan
Channel List
Manual Register
Antenna

Use [Cursor K / L] to select the channel you want to

4

remove, then press [ENTER].

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “CHANNEL”, then press

2

[ENTER].

Use [Cursor K / L] to select “Manual Register”, then

3

press [ENTER].

Channel

Channel

Autoscan
Channel List
Manual Register
Antenna

Use [the Number buttons] to enter the number of the

4

channel you want to add, then press [ENTER].

The channel will be removed and the display of

•
the list lightens. You will not be able to select the
channel again using [CH K / L].
To reactivate a removed channel, use [Cursor K / L] and

•
press [ENTER], so the channel will be registered and the
display of the list darkens.
When you remove a major channel, its minor

•
channels are removed as well.

Press [SETUP] to exit.

5

Note:

• The channel with the “DTV” indicated on the display is
ATSC. Otherwise the channel is NTSC.

20

EN

Channel List

Channel List

Highlight channels for Ch
Up/Down key selection.

ENTER

Ch Select Watch/Skip Back

DTV66

DTV

DTV 8

DTV 8

DTV 48

DTV 48

DTV 67

BACK

27

9

9

58

58

Manual Register

Manual Register

For analog channels, select a
channel to register using number
keys.
For digital channels, you must
perform Autoscan function.

Ch Change

11

Register

BACK

Back

Press [SETUP] to exit.

5

Note:

• If set up completes successfully,
“Registered to the channel list” is displayed.

• If external input is used, it is not possible to register the
channel and “Unavailable” will be displayed on the TV
screen.

• By using [CH K / L], you can select the memorized
channels only.

Antenna Confirmation

5

DTV

This function lets you check the digital signal strength of each channel.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “CHANNEL”, then press

2

[ENTER].

Use [Cursor K / L] to select “Antenna”, then press

3

[ENTER].

Channel

Channel

Autoscan
Channel List
Manual Register
Antenna

Use [the Number buttons] or [CH K / L] to select the

4

channel for which you want to check the digital signal
strength.

Antenna

Antenna

Now 70 80 Peak

CH

If the channel is set to analog channel or external

•
input, you cannot confirm the antenna condition.

Antenna

Antenna

Indicator is available
for digital broadcasting
only.

WATCHING TVINTRODUCTION PREPARATION INITIAL SETTING

OPTIONAL SETTING

TROUBLESHOOTING

11-1

Back

INFORMATION

Ch Change

11

Back

Press [SETUP] to exit.

5

CH

Ch Change

21

EN

PTIONAL SETTING

O

Picture Adjustment

5

You can adjust brightness, contrast, color, tint and sharpness.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “PICTURE”, then press

2

[ENTER].

Use [Cursor K / L] to select the item you want to adjust,

3

then press [ENTER].

Picture

Picture

Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings
Color Temp.
Back Light

Adjust the picture quality.

4

Picture Mode

Use [Cursor K / L] to select the desired setting, then
press [ENTER]. (Standard, Dynamic, Movie and News)

Picture

Picture

Picture Mode

Brightness
Contrast
Color
Tint
Sharpness
Reset Settings
Color Temp.
Back Light

Dynamic

Neutral

Standard

Dynamic

Movie
News

30
60
36

0
0

0

Cursor

Brightness

Brightness 30

Adjust

Contrast

Contrast

Adjust Move

Color

Color

Adjust Move

s

to decrease

ENTER

Move

Enter

30

30

ENTER

Enter

ENTER

Enter

brightness

to decrease
contrast

to decrease
color

Cursor

to increase
brightness

to increase
contrast

to brighten
color

Tint

Tint

0

Adjust Move

ENTER

Enter

to add red to add green

Sharpness

0Sharpness

Adjust Move

ENTER

Enter

to make soft to make clear

Reset Settings

Use [Cursor K / L] to select “Reset”, then press [ENTER]
to restore the “Picture Mode” settings to the default.

Reset Settings

Reset Settings

This function resets the
"Dynamic" setting for Picture
Mode to factory default.

Color Temp.

Use [Cursor K / L] to select the desired setting, then
press [ENTER]. (Cool, Neutral and Warm)

Picture

Picture

Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings

Color Temp.

Back Light

Back Light

Use [Cursor

/

s

B

] to adjust the brightness of the backlight.

Cancel
Reset

Cool

Neutral

Warm

B

Brightness, Contrast, Color, Tint, Sharpness

Use [Cursor

s

/

B

] to adjust.

22

EN

: To brighten

Back Light 0

Adjust

: To darken

Press [SETUP] to exit.

5

Note:

• To cancel picture adjustment, press [SETUP].

• When this unit is connected to PC or DVI devices,
you cannot select “Sharpness”.

ENTER

Enter

Sound Adjustment

5

You can adjust treble and bass.

Press [SETUP] to display the main menu.

1

Use [Cursor K / L] to select “SOUND”, then press

2

[ENTER].

Reset Settings

Use [Cursor K / L] to select “Reset”, then press [ENTER]
to restore the sound settings to the default.

Reset Settings

Reset Settings

This function resets the Sound
settings to factory default.

Press [SETUP] to exit.

5

Cancel
Reset

Use [Cursor K / L] to select the sound type you want to

3

adjust, then press [ENTER].

Sound

Sound

Treble
Bass
Reset Settings

Adjust the sound setting.

4

Treble, Bass

Use [Cursor s / B] to adjust.

Cursor

Treble

Treble

Bass

Bass

Adjust

Adjust

s

0

0

Move

Move

ENTER

Enter

ENTER

Enter

to decrease
higher-pitched
sounds

to decrease
lower-pitched
sounds

Cursor

to increase
higher-pitched
sounds

to increase
lower-pitched
sounds

B

Note:

WATCHING TVINTRODUCTION PREPARATION INITIAL SETTING

• To cancel sound adjustment, press [SETUP].

0
0

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

EN

23