FUNAI LC195EM9, LC195EM9 2, LC195EM9 B User Manual

EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSO N RADIO CORP., PARSIPPANY, NEW JERS EY, U. S.A.

NEED HELP?

PLEASE CALL TOLL FREE!

1-800-256-2487

OR VISIT OUR WEB SITE AT

www.EmersonAudioVideo.com

19” Digital LCD TV

Owner’s Manual

LC195EM9 B

LC195EM9 2 LC195EM9

WATCHING TVINTRODUCTION PREPARATION INITIAL SETTING OPTIONAL SETTING

HIGH-DEFINITION TELEVISION

TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.

TROUBLESHOOTING

INFORMATION

NTRODUCTION

The model and serial numbers of this unit may be found on the cabinet. You should record and retain those numbers for future reference.

Model No.:

Serial No.:

Precautions5

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS

TO RAIN OR MOISTURE.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS

FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear or bottom of the cabinet.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacture’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.

FCC WARNING

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

RADIO-TV INTERFERENCE

This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the apparatus and receiver.

3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 2.8 inches (7cm) or more around this apparatus.

Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.

WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the instructions.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

• Do not remove this unit cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to this

• unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center. Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.

• Do not put your fingers or objects into the unit.

•

LOCATION AND HANDLING

The openings should not be blocked by placing the unit on a bed, sofa, carpet, rug, or other similar surface.

• Do not install the unit near or over a radiator or heat register.

• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.

• Avoid a place with drastic temperature changes.

• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.

• Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit. Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.

•

NOTE ABOUT RECYCLING

This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance

• with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local

• regulations concerning chemical wastes.

INTRODUCTION

PREPARATION

INITIAL SETTING

WATCHING TV INFORMATION

OPTIONAL SETTING TROUBLESHOOTING

NTRODUCTION

Supplied Accessories5

owner’s manual (1EMN23319)

If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free

• customer support line found on the cover of this manual. Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters).

• Contact your local electronics store for these items.

Attaching the Stand

You must attach the stand to the unit to display upright. Be sure the front and rear of the stand match the proper direction.

remote control (NF606UD)

batteries (AA x 2)

Spread a thick and soft cloth over a table. Place the main

unit face down onto it. Make sure not to damage the screen.

To Remove the Stand from this Unit

Grip the levers on the bottom stand and remove the stand from the unit slowly. Be careful not to drop the stand when you remove it.

Note:

• When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.

• Make sure to use a table which can support the weight of this unit and is larger than this unit.

• Make sure the table is in a stable location.

Insert the stand all the way to the main unit slowly until

it clicks. Make sure not to put the AC cord between the stand and the unit.

lever

Symbols Used in this Manual

The following is the description for the symbols used in this manual. Description refers to:

: Digital TV operation

DTV

•

If neither symbol appears under the function heading, operation is applicable to both.

Trademark Information

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby

• Laboratories. Product that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.

•

: Analog TV operation

INTRODUCTION

Features5

•

DTV/TV/CATV

You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels.

•

Information Display (DTV only)

You can display the title, contents and other information of the current DTV program on the TV screen.

•

Auto Channel Scan

This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.

•

V-chip

This feature allows you to block children’s access to inappropriate programs.

•

Closed Caption Decoder

Built-in closed caption decoder displays text for closed caption supported programs.

•

MTS/SAP Tuner

Audio can be selected from the remote control.

•

Auto Shut Off Function

If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn itself off automatically.

•

Sleep Timer

This feature will automatically turned off the power of the unit at a specific time.

•

Choices for On-screen Language

Select your on-screen language: English, Spanish or French.

•

Stereo Sound Function

•

PLL Frequency Synthesized Tuning

Provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons on the remote control.

•

PC Input

•

Component Video Input

•

S-video Input

•

AV Input

•

Digital Audio Coaxial Output

Contents5

INTRODUCTION

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Trademark Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Buttons on the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Installing the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

PREPARATION

Basic Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

INITIAL SETTING

Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

WATCHING TV

Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Still Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Switching Each Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Switching Audio Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Screen Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

TV Screen Display Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

OPTIONAL SETTING

Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Manual Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Antenna Confirmation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

DTV Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

CC Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

V-chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

PC Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

TROUBLESHOOTING

Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

INFORMATION

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Cable Channel Designations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Other Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back cover

PREPARATION

INITIAL SETTING

WATCHING TV INFORMATION

OPTIONAL SETTING TROUBLESHOOTING

any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

NTRODUCTION

Buttons on the Remote Control5

1. POWER (p. 12)

Press to turn the unit on and off.

1 2

CH.

5 6

2. MUTE

12 13

15 16

Press to turn the sound on and off.

3. SLEEP (p. 14)

Press to activate the sleep timer.

4. Number buttons (p. 14)

•

- (hyphen)

•

5. CH. K / L (p. 14)

Press to select channels and the

external input modes.

6. VOL. X / Y (p. 14)

Press to adjust the volume.

7. ENTER (p. 12)

Press to confirm your selection.

8. SETUP (p. 12)

Press to display the main menu.

9. s / B / K / L (p. 12)

Press to move left/ right/ up/

down through the items.

10. BACK (p. 16)

Press to return to the previous

menu operation.

11. INPUT SELECT (p. 15) Press to switch the input modes.

(p. 14)

Press to select channels.

Press to shift the minor channel from the major channel.

12. INFO

13. AUDIO

14. SCREEN MODE (p. 17)

15. CH. RETURN (p. 14)

16. STILL (p. 15)

(p. 16)

Digital Mode (DTV)

•

Press to display the channel information, signal type and TV setting.

Analog Mode (TV)

•

Press to display the channel number, signal type and TV setting.

External Input Mode

•

Press to display the external input modes, signal type and TV setting.

Digital Mode (DTV)

•

Analog Mode (TV)

•

Press to select aspect ratio available for the TV screen.

Press to return to the previously viewed channel.

Press to pause screen image.

(p. 15)

Press to select the audio language.

Press to select the audio mode.

Installing the Batteries

Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.

21 3

Battery Precautions:

• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries; they can overheat and rupture.

INTRODUCTION

Control Panel5

side of this unit

Press to turn the unit on and off.

2. INPUT SELECT/ENTER (p. 15)

Press to switch the input modes.

•

Press to confirm your selection.

•

3. CH. K / L (p. 14)

PREPARATION

Press to select channels or move up/down through the

1. POWER y (p. 12)

main menu items.

4. VOL. X / Y (p. 14)

Press to adjust the volume or move right (X) / left (Y)

through the main menu items.

INITIAL SETTING

5. SETUP (p. 12)

Press to display the main menu.

6. infrared sensor window

Receives infrared rays transmitted from the remote

control.

7. power on indicator

Lights up when power is on.

WATCHING TV INFORMATION

8. stand by indicator

Lights up in standby mode.

Rear Panel5

OPTIONAL SETTING TROUBLESHOOTING

1. PC input jack (p. 11)

VGA cable connection for PC.

2. antenna input jack (p. 8)

RF coaxial cable connection for your antenna or

cable/satellite box.

3. AC power cord

Connect to a standard AC outlet to supply power to this unit.

4. component video and audio input jack (p. 9)

RCA component video and RCA audio connection for external devices.

5. video input jack (p. 10)

RCA video connection for external devices.

6. audio input jack (p. 9)

RCA audio connection for external devices.

7. audio input jack for PC connection (p. 11)

Mini-plug audio cable connection for PC.

8. coaxial digital audio output jack (p. 10)

Coaxial digital audio connection for a decoder or an

audio receiver.

9. S-video input jack (p. 9)

S-video connection for external devices.

VIDEOS-VIDEO

PC-IN

AUDIO COAXIAL

VIDEO 2

PrPbY

VIDEO 1

AUDIOCOMPONENT

AUDIO

REPARATION

Cables not included.

Please purchase the necessary cables at your local store.

Basic Connection

This section describes how to connect the unit to an antenna, cable/satellite box, etc.

Note:

• Be sure your antenna or other device is connected properly before plugging in the power cord.

[Antenna Connection]

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

e.g.)

VHF / UHF antenna

RF coaxial cable

cable TV

company

Once connections are completed, turn on the unit and begin initial setup.

Channel scanning is necessary for the unit to memorize all available channels in your area. (Refer to “Initial Setup” on page 12.)

rear of this unit

Note:

• For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit.

• If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than settop versions.

• To switch your reception source easily between antenna and cable, install an antenna selector.

• If you connect to the cable system directly, contact the CAT V installer.

[Connection to Cable Box or Satellite Box]

Use an RF coaxial cable to connect the antenna input jack of the unit to the antenna output jack of the cable/satellite box.

e.g.)

satellite dish

ANT OUTANT IN

cable TV

company

Required cables and connecting methods differ depending on the cable/satellite box. For more information, please contact your cable/satellite provider.

RF coaxial cable

STEREO PCM

cable/satellite box

RF coaxial cable

rear of this unit

Cables not included.

Please purchase the necessary cables at your local store.

External Device Connection

[Component Video Connection]

RCA component video connection offers better picture quality for video devices connected to the unit. Use an RCA component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s component video input jacks, connect an RCA audio cable to the audio L/R jacks of VIDEO2.

PREPARATION

e.g.)

RCA audio cable

RCA component video cable

(red)(red)(blue)(blue)(green)(green)

TITLE 5 CHAPTER 15 REPEAT A-B

DVD player with

AUDIO OUT

COMPONENT VIDEO OUT

Pr/CrPb/CbY

the component video output jacks

(red)(blue)(green)

VIDEO 2

PrPbY

VIDEO 1

VIDEOS-VIDEO

PC-IN

AUDIO

COAXIAL

rear of this unit

Note:

• This unit accepts 480i / 480p / 720p / 1080i video signals.

[S-video Connection]

S-video connection offers good picture quality for video devices connected to the unit. Use an S-video cable to connect the unit to external video devices equipped with S-video output jack. If you connect to the unit’s S-video input jack, connect an RCA audio cable to the audio L/R jacks of VIDEO1.

e.g.)

AUDIOCOMPONENT

AUDIO

INITIAL SETTING

WATCHING TVINTRODUCTION

OPTIONAL SETTING

TROUBLESHOOTING

RCA audio cable

S-video cable

TITLE 5 CHAPTER 15 REPEAT A-B

DVD player with

AUDIO OUT

S-VIDEO

OUT

the S-video output jack

VIDEO 2

PrPbY

VIDEO 1

VIDEOS-VIDEO

PC-IN

AUDIO COAXIAL

rear of this unit

Note:

• If you connect to the S-video input jack and the video input jack at the same time, the S-video connection will have priority.

AUDIOCOMPONENT

AUDIO

INFORMATION

REPARATION

Cables not included.

Please purchase the necessary cables at your local store.

[Video Connection]

RCA video connection offers standard picture quality for video devices connected to the unit. Use an RCA video cable to connect the unit to external video devices equipped with video output jack. If you connect to the unit’s video input jack, connect an RCA audio cable to the audio L/R jacks of VIDEO 1. When the audio jack of the video device is monaural, connect an RCA audio cable to the audio L input jack.

e.g.)

RCA audio cable

RCA video cable

camcorder video game

AUDIO OUT

STEREO

STAND-BY

VCR

VIDEO

OUT

S-VIDEO

PC-IN

AUDIO COAXIAL

VIDEO 2

PrPbY

VIDEO 1

VIDEO

rear of this unit

Note:

• If you connect to the S-video input jack and the video input jack at the same time, the S-video connection will have priority.

[Digital Audio Output Connection (for digital broadcasting only)]

If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Use a digital audio coaxial cable to connect the unit to external digital audio devices.

e.g.)

DIGITAL AUDIO

COAXIAL IN

digital audio coaxial cable

Dolby Digital

decoder

VIDEO 2

PrPbY

VIDEO 1

VIDEOS-VIDEO

PC-IN

COAXIAL

AUDIO

rear of this unit

AUDIOCOMPONENT

AUDIO

AUDIOCOMPONENT

AUDIO

Cables not included.

Please purchase the necessary cables at your local store.

[PC Connection]

This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a computer monitor.

e.g.)

VGA cable should be with ferrite core.

personal computer

VGA cable

mini-plug audio cable

VIDEOS-VIDEO

PC-IN

AUDIO COAXIAL

PrPbY

VIDEO 2

VIDEO 1

AUDIOCOMPONENT

AUDIO

rear of this unit

The following signals can be displayed:

Format Resolution V. Frequency Format Resolution V. Frequency

VGA 640 x 480 60Hz

SVGA 800 x 600 60Hz

XGA 1024 x 768 60Hz

WXGA

1280 x 768 60Hz

1360 x 768 60Hz

Other formats or non-standard signals will not be displayed correctly.

Note:

• Please purchase the VGA cable that has a ferrite core.

• The following operations may reduce noise.

- Attach a ferrite core to the AC power cord of your PC.

- Unplug the AC power cord and use the built-in battery of your PC.

PREPARATION

INITIAL SETTING

WATCHING TVINTRODUCTION

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

NITIAL SETTING

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

Initial Setup

This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and auto channel scan, which automatically scans and memorizes viewable channels.

Before you begin:

Make sure if the unit is connected to antenna or cables.

After making all the necessary connections, press

[POWER] to turn on the unit.

This operation may take a few moments.

•

Use [Cursor K / L] to select the on-screen language

from the choices on the right side of the TV screen. (English / Español / Français)

Initial Setup

“Initial Setup” menu on step 3 will be displayed in the

•

selected language after you press [ENTER].

Initial Setup

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

ENTER

Select Enter Exit

English

Español

Français

SETUP

Note:

• If you connect the cable system directly, contact the CAT V installer.

• If you press [POWER] or [SETUP] during auto channel scan, this setting will be canceled.

• The initial auto channel scan function can be executed for either “Air” or “Cable” only once. When you change the connection (Air/Cable), set auto channel scan again. (Refer to page 13.)

• You can cancel or exit the initial auto channel scan menu by pressing [SETUP].

• If there is no signal input from the antenna terminal and no operation for several seconds after you turn on the unit, “Helpful Hints” appears. Follow the instructions listed on the TV screen.

2-2

No channel is registered. Press and hold "ENTER" key on the remote control for 3 seconds. Contact support hotline provided on manual or back of unit.

Sin canal registrado. Pulse durante 3 segundos la tecla "ENTER" en el control remoto. Llame teléfono de apoyo en manual o atrás de TV.

Pas de chaîne consign. Enfoncez "ENTER" 3 secondes sur la télécommande. Contacter numero d'urgence dans manuel ou arrière appareil.

Main Menu

This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below.

Press [SETUP].

Use [Cursor K / L] to select “Air” for TV channels or

“Cable” for CATV channels, then press [ENTER].

Initial Setup

Scanning and memorizing of channels start

•

Initial Setup

Make sure the antenna is connected to "ANT.IN" jack. Select the destination of "ANT.IN" jack.

Air

Cable

ENTER

Select Enter Exit

automatically.

Initial Setup

Now the system is scanning for channels,please wait.

Analog channels 1ch

Digital channels 0ch

When the scanning and memorizing of channels are

• completed, the lowest memorized channel will be displayed.

EXIT

Air Cable

To exit settings.

PICTURE

You can adjust the picture quality.

ANT.IN

BACK

SETUP

Back

(Refer to “Picture Adjustment” on page 21.)

SOUND

You can adjust the sound quality. (Refer to “Sound Adjustment” on page 22.)

CHANNEL

You can automatically scan the viewable channels and remove the undesired channels. (Refer to “Auto Channel Scan” on page 13.)

DETAIL

You can change the display format for closed caption,

SETUP

Exit

which displays the dialogue of a TV program or other information across the TV screen. (Refer to “Closed Caption” on page 23.) You can set the viewing limitations. (Refer to “V-chip” on page 27.) You can adjust the position, stability and clarity of the PC screen. (Refer to “PC Settings” on page 30.)

LANGUAGE

You can change the language (English, Spanish, French) displayed on the main menu. (Refer to “Language Selection” on page 13.)

Auto Channel Scan

If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform auto channel scan.

Before you begin:

Make sure if the unit is connected to antenna or cables.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “CHANNEL” , then press

[ENTER].

Note:

• After setting “Auto Channel Scan”, using [CH. K / L] on the remote control skips unavailable programs automatically.

• If you connect the cable system directly, contact the CAT V installer.

• If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled.

• Channel settings will be saved even if the power fails.

• If you need the English menus instead of the Spanish or French menus you are having, press [SETUP]. Use

[Cursor K [ENTER]. Use [Cursor K / L] to select “English”, then press [ENTER]. Press [SETUP] to exit the main menu.

• With regard only to the digital channel, even after the scanning is completed if you unplug the AC power cord before turning off the unit by pressing [POWER], the channel setting may be lost.

/ L] to select “IDIOMA” or “LANGUE”, then press

INITIAL SETTING

Use [Cursor K / L] to select “Autoscan”, then press

[ENTER].

Use [Cursor K / L] to select an appropriate option, then press [ENTER].

When aerial antenna is connected, select “Air”.

• When connected to CATV, select “Cable”.

• Scanning and memorizing of channels start

• automatically.

Channel

Autoscan Channel List Manual Register Antenna

Autoscan

Autoscan will rescan all channels. This may take a while to complete.

Select the destination of "ANT.IN" jack.

Air

Cable

Now the system is scanning for channels, please wait.

72%

Analog channels 10ch

Digital channels 6ch

SETUP

Exit

ANT.IN

Back Air Cable Cable

1 hour

Language Selection

You can choose English, Spanish or French as your on-screen language.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “LANGUAGE”, then press

[ENTER].

Language

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

English

Español

Français

Use [Cursor K / L] to select “English”, “Español” or

“Français”, then press [ENTER].

Press [SETUP] to exit.

WATCHING TVINTRODUCTION PREPARATION

OPTIONAL SETTING

TROUBLESHOOTING

INFORMATION

When the scanning and memorizing are completed,

• the lowest memorized channel will be displayed.

ATCHING TV

Channel Selection

Select channels by using [CH. K / L] or [the Number buttons].

Use

[CH. K / L] or [the Number buttons] to select the

memorized channels.

Volume Adjustment

This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described.

Use [VOL.

] to adjust the audio volume.

Volume 20

Using [the Number buttons]

When selecting analog channel 12

DTV

When selecting digital channel 12-1

Be sure to press [–] before entering the minor

• channel number. Press [CH. RETURN

• viewed channel.

•

Only [the Number buttons] can be used to select the non-memorized channels.

About digital TV broadcasting:

With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality.

What is the minor channel?

By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously. Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network.

NTSC (analog mode)

CH4

: change automatically : change manually by using [CH.

[Air Time]

] to return to the previously

18:00

18:30

19:00

19:30

20:00

20:30

major channel minor channel

ATSC (digital mode)

No signal

CH4

(high definition TV)

CH4

CH4-1

CH4

No signal

CH4

CH4-1

K / L]

No signal

CH4-2

Note:

• “No Signal” will appear on the TV screen after the minor channel broadcast is over.

• “Audio only program“ message will appear on the TV screen, when you receive only sound signal.

The volume bar will be displayed at the bottom of

• the TV screen when adjusting the volume. The volume bar will automatically disappear in a few

• seconds.

Press [MUTE ] to turn off and on the sound.

Mute

“Mute” is displayed on the TV screen for a few

• seconds.

Press [MUTE ] again or use [VOL. original volume.

Sleep Timer

The sleep timer can be set to automatically turn off the unit after an incremental period of time.

Press [SLEEP ] to set the sleep timer.

Sleep timer display appears on the TV screen.

•

Press [SLEEP ] repeatedly to change the amount of

time until shut off.

•

You can set your unit to turn off after a set period of time (from 30 to 120 minutes).

•

Each press of [SLEEP minutes.

•

After setup, the sleep timer display can be called up for checking by pressing [SLEEP ].

] to recover the

Sleep

] will increase the time by 30

Off

120min.

To Cancel the Sleep Timer

Press [SLEEP ] repeatedly until “Sleep Off” is displayed on the TV screen.

Note:

• The sleep timer display will automatically disappear in a few seconds.

• When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.

Still Mode

You can pause the image shown on the TV screen.

Switching Audio Mode

This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.

INTRODUCTION

Press

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access external devices when they are connected to the unit.

[STILL] to pause the image shown on the TV

screen.

Still

The sound output will not be paused.

• If no signal is detected or protected signal is received

• during still mode, the image remains paused and the sound output will be muted. The still function will be released after 5 minutes.

•

To cancel still mode, press any button except [POWER].

Switching Each Input Mode

Press [INPUT SELECT] or [CH. K] repeatedly to cycle through the input modes.

DTV/TV channel

Pressing [CH. L] reverses the direction of the input

• modes. To use the video or S-video input jack on the unit,

• select “Video1”. To use the component video input jacks on the unit,

• select “Video2”. To use the PC input jack on the unit, select “PC”.

•

Video1

Video2

Press [AUDIO ] to display the currently selected

audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.

When all audio are available

When stereo and monaural audio are available

When SAP and monaural audio are available

When only monaural audio is available

STEREO : Outputs stereo-audio SAP : Outputs second audio program MONO : Outputs mono-audio

DTV

Press [AUDIO ] to display the currently selected

language and the number of available languages.

Press [AUDIO ] repeatedly to cycle through the

available audio languages.

Available languages differ depending on the

• broadcast. “Other” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.

SAP / STEREO SAP / MONO

SAP / STEREO

MONO / STEREO MONO / STEREO

SAP / MONO SAP / MONO

(Cannot be switched)

SAP / STEREO

MONO

6-1

English 1/3

PREPARATION INITIAL SETTING OPTIONAL SETTING

WATCHING TV

TROUBLESHOOTING

INFORMATION

Note:

• Pressing [AUDIO ] does not control external audio devices.

• The information display will automatically disappear in a few seconds.

ATCHING TV

Screen Information

You can display the currently selected channel or other information such as the audio mode on the TV screen.

In the analog mode, the current channel number and the audio mode are displayed.

DTV

In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed.

Press [INFO ].

SAP / STEREO

480i

The current channel number, audio mode, type of

• resolutions for video signal, TV aspect ratio, CC and TV program rating are displayed on the top-right corner of the TV screen. To clear the display, press [INFO ] again. You can

• also press [BACK ].

TV-PG DLSV

4:3

Press [INFO ] to display the details of the currently selected program.

Broadcasting Information

The following information is displayed.

1 program title 2 broadcast station 3 program guide

(The program guide added to broadcasting information is displayed. Maximum display of 4 lines.)

4 channel number 5 audio language

(Refer to “Switching Audio Mode” on page 15.)

6 effective scanning lines and scan mode 7 program format 8 program aspect ratio 9 program rating 10 CC (not available if CC is set to “Off”)

A Day of Memories

A quarter-century ago,which may now qualify as the good old days of newspapering,run-of-paper sales accounted for 80 percent of the industry's advertising revenues.Department stores and supermarket were

KABC

English 1/2

1080i

TV-PG DLSV

6-1

16:9HDHD

16:9

6, 7, 8

Note:

• When the program guide consists of more than 4 lines, use [Cursor K/ L] to scroll.

• “No description provided.” is displayed when the program guide is not provided.

• While the program guide is displayed, the closed caption function is interrupted.

• In external input mode, the following screen is displayed; e.g.) When an external device is connected to VIDEO1 input

jack.

Video1

480iSDSD

480i

TV-PG DLSV

• The information display will automatically disappear in 1 minute.

TV Screen Display Mode

3-5 types of display modes can be selected when the unit receives 4:3 / 16:9 video signal or PC input signal.

INTRODUCTION

Press [SCREEN MODE ] repeatedly to switch the TV aspect ratio.

For 4:3 video signal

Wide

(digital mode)

Sidebar

Wide

(

analog /

external input mode

PREPARATION INITIAL SETTING OPTIONAL SETTING

For 16:9 video signal

Full

Side Cut

)

Expand

WATCHING TV

Cinema

Full

Cinema

Sidebar

Select to display a 4:3 picture at its original size. The black bars appear on the left and right sides of the screen.

Full

Select to display a 4:3 picture to fill the screen.

Cinema

Select to reduce the black bars on top and bottom.

Wide

Digital mode:

Select to display a 4:3 picture to fill the screen and shrink “FULL” picture horizontally.

Analog / external input mode:

Select to display a 4:3 picture to fill the screen and stretch “FULL” picture horizontally.

Zoom

Full

Select to display a 16:9 picture to fill the screen.

Side Cut

Select to display a 16:9 picture to fill the screen and stretch “FULL” picture horizontally. The left and right sides of the picture will be cropped out.

Zoom

Select to enlarge a 16:9 picture without distorting the aspect ratio.

Cinema

Select to reduce the black bars on top and bottom.

Expand

Select to reduce the black bars on the left and right sides.

TROUBLESHOOTING

INFORMATION

ATCHING TV

For PC input signal

Normal

Full

Dot By Dot

VGA 640 x 480

SVGA 800 x 600

XGA 1,024 x 768

WXGA

Normal

1,280 x 768 1,360 x 768

Normal

Select to display a vertically stretched picture without distorting the aspect ratio. The black bars appear on the left and right sides of the screen.

Normal

Select to display a horizontally stretched picture without distorting the aspect ratio. The black bars appear on the top and bottom sides of the screen.

Type of display Format Resolution

Full

Select to display a picture to fill the screen.

Dot By Dot

Select to display a picture in its original size.

Note:

• You may not switch the display mode depending on the program or resolution.

• You can change the screen resolution on your PC.

PTIONAL SETTING

Channel List

The channel list function lets you remove undesired channels from the channel registration list.

Manual Register

The manual register function lets you add the channels that were not added by the auto channel scan due to the reception condition at the initial setting.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “CHANNEL”, then press

[ENTER].

Channel

Autoscan Channel List Manual Register Antenna

Use [Cursor K / L] to select “Channel List”, then press

[ENTER].

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “CHANNEL”, then press

[ENTER].

Channel

Autoscan Channel List Manual Register Antenna

Use [Cursor K / L] to select “Manual Register”, then

press [ENTER].

WATCHING TVINTRODUCTION PREPARATION INITIAL SETTING

OPTIONAL SETTING

Use [Cursor K / L] to select the channel you want to

remove, then press [ENTER].

Channel List

The channel display for the removed channel

•

Highlight channels for Ch Up/Down key selection.

ENTER

Ch Select Watch/Skip Back

darkens. You will not be able to select the channel again using [CH. K / L]. To reactivate a removed channel, use [Cursor K / L] and

•

press [ENTER]. The registered channels are highlighted. When you remove a major channel, its minor

• channels are removed as well.

Press [SETUP] to exit.

Note:

• The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

DTV 6

DTV 8

DTV 48

DTV 67

BACK

Use [the Number buttons] to enter the number of the

channel you want to add, then press [ENTER].

Manual Register

For analog channels, select a channel to register using number keys. For digital channels, you must perform Autoscan function.

Ch Change

BACK

Back

TROUBLESHOOTING

INFORMATION

Press [SETUP] to exit.

Note:

• If set up completes successfully, “Registered to the channel list” is displayed.

• If external input is used, it is not possible to register the channel and “Unavailable” will be displayed on the TV screen.

• By using [CH. K / L], you can select the memorized channels only.

PTIONAL SETTING

Antenna Confirmation

DTV

This function lets you check the digital signal strength of each channel.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “CHANNEL”, then press

[ENTER].

Use [Cursor K / L] to select “Antenna”, then press

[ENTER].

Channel

Use [the Number buttons] or [CH. K / L] to select the

Autoscan Channel List Manual Register Antenna

channel for which you want to check the digital signal strength.

Antenna

Now 70 80 Peak

If the channel is set to analog channel or external

• input, you cannot confirm the antenna condition.

Antenna

Indicator is available for digital broadcasting only.

11-1

Back

Ch Change

Back

Press [SETUP] to exit.

Ch Change

Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “PICTURE”, then press

[ENTER].

Use [Cursor K / L] to select the item you want to adjust,

then press [ENTER].

Cursor

Brightness

Brightness 30

Adjust

Contrast

Adjust Move

Color

Adjust Move

to decrease

ENTER

Move

Enter

ENTER

Enter

ENTER

Enter

brightness

to decrease contrast

to decrease color

Cursor

to increase brightness

to increase contrast

to brighten color

Tint

Adjust Move

ENTER

Enter

to add red to add green

Sharpness

0Sharpness

Adjust Move

ENTER

Enter

to make soft to make clear

Reset Settings

Use [Cursor K / L] to select “Reset”, then press [ENTER] to restore the “Picture Mode” settings to the default.

WATCHING TVINTRODUCTION PREPARATION INITIAL SETTING

Picture

Adjust the picture quality.

Picture Mode Brightness Contrast Color Tint Sharpness Reset Settings Color Temp. Back Light

Picture Mode

Use [Cursor K / L] to select the desired setting, then press [ENTER]. (Standard, Dynamic, Movie and News)

Picture

Picture Mode

Brightness Contrast Color Tint Sharpness Reset Settings Color Temp. Back Light

Brightness, Contrast, Color, Tint, Sharpness

Use [Cursor

] to adjust.

Dynamic

Neutral

Standard

Dynamic

Movie News

Reset Settings

30 30 30

0 0

Reset Settings

This function resets the "Dynamic" setting for Picture Mode to factory default.

Cancel Reset

OPTIONAL SETTING

Color Temp.

Use [Cursor K / L] to select the desired setting, then press [ENTER]. (Cool, Neutral and Warm)

Picture

Picture Mode Brightness Contrast Color Tint Sharpness Reset Settings

Color Temp.

Back Light

Cool

Neutral

Warm

TROUBLESHOOTING

INFORMATION

Back Light

Use [Cursor

] to adjust the brightness of the backlight.

: To brighten

Back Light 0

Adjust

ENTER

Enter

: To darken

Press [SETUP] to exit.

Note:

• To cancel picture adjustment, press [SETUP].

• When this unit is connected to PC or DVI devices, you cannot select “Sharpness”.

PTIONAL SETTING

Sound Adjustment

You can adjust treble and bass.

Press [SETUP] to display the main menu.

Use [Cursor K / L] to select “SOUND”, then press

[ENTER].

Sound

Treble Bass Reset Settings

Use [Cursor K / L] to select the sound type you want to

adjust, then press [ENTER].

Reset Settings

Use [Cursor K / L] to select “Reset”, then press [ENTER] to restore the sound settings to the default.

Reset Settings

Press [SETUP] to exit.

Reset Settings

This function resets the Sound settings to factory default.

Cancel Reset

Note:

• To cancel sound adjustment, press [SETUP].

0 0

Adjust the sound setting.

Treble, Bass

Use [Cursor s / B] to adjust.

Treble

Bass

Adjust

Move

ENTER

Enter

Cursor

to decrease higher-pitched sounds

to decrease lower-pitched sounds

Cursor

to increase higher-pitched sounds

to increase lower-pitched sounds

+ 50 hidden pages