the E
energy efficiency. E
a U.S. registered mark.
E7800CVR
NERGY STAR
®
NERGY STAR
®
guidelines for
®
is
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
If you need additional assistance for set-up or operating
after reading owner’s manual, please call
TOLL FREE : 1-800-968-3429.
Please read before using this equipment.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" with in the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
LASER SAFETY
This unit employs a laser. Only a qualified service person sho uld remove the cover or attempt to service this d evice, due to
possible eye injury.
CAUTION:
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION:
STARE INTO BEAM.
LOCATION:
USE OF CONTROLS OR ADJUSTMENTS OR PE RFORMANCE OF PROCEDURES OTHER THAN THOSE
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEF EAT ED. DO NOT
INSIDE, NEAR THE DECK MECHANISM.
FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.
The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequen cy energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
This Class B di gital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
E7800-UL
- 2 -EN
0D05
IMPORTANT SAFEGUARDS
1) Read Instructions - All the safety and operating instructions should be read before the product is operated.
2) Retain Instructions - The safety and operating instructions
should be retained for future reference.
3) Heed Warnings - All warnings on the product and in the
operating ins tructions shoul d be a dhe r e d to.
4) Follow Instructions - All operating and use instructions
should be follow e d .
5) Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
6) Attachments - Do not use attachments n ot recommended
by the product manufacturer as they may cause hazards.
7) Water an d M oisture - Do not us e th is product near w a ter for example, near a bath tub, wash bowl, ki tchen sink , or
laundry tub; in a wet basement; or near a swimming pool;
and the like.
8) Accessories - Do not place this product on an unstable cart,
stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious
damage to the product. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or
sold with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a mo unting
PORTABLE CART WARNING
(Symbol provided by RETAC)
accessory recommended by the
manufacturer.
9) A product and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product and
cart combination to overturn.
S3125A
10)Ventilation - Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
product and to protect it from overheating, and these openings must not be blocked or covered. The openings should
never be bloc ked by placing the product on a bed, sofa, ru g,
or other similar surface. This product should not be placed
in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manu facturer’s instructions have been adhered to.
11)Power Sources - This product should be operated only from
the type of power source indicated on the marking label. If
you are not sure of the type of pow er s upply to yo ur h ome,
consult your product deal er or local power company . For
products intended to operate from battery power, or other
sources, refer to the operating instructions.
12)Grounding or Polariza tion - This pr oduct ma y be equip ped
with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the outlet, try
reversing the plug. If the pl ug should stil l fail to fit , contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
13)Power-Cord Protecti on - Power-supply cords should b e
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords at plugs, convenience receptacles, and
the point where they exit from the product.
14)Lightning - For added protection for this product during a
lightning s torm, o r when it is lef t unatten ded an d unuse d
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prev ent
damage to the product due to lightning and power-line
surges.
15)Power lines - An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna
system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might
be fatal.
16)Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can result
in a risk of fire or electric shock.
17)Object and Liquid Entr y - Never push objects of any kind
into this product through openings as they may touch
dangerous volt age points or short- out parts that co uld result
in a fire or e lect ric shoc k. Ne ver s pill liq uid of an y ki nd on
the product.
18)Servici ng - D o no t a tt empt t o se rvic e this pr oduc t y our sel f
as opening or remo ving c over s ma y ex pose y ou to da nger ous voltage or other hazards. Refer all servicing to qualified service personnel.
19)Damage R equir ing Se rvice - Unp lug thi s pr oduct from the
wall outlet and refer servicing to qualified service personnel under the fo llowing conditio ns :
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate no rmally by following
the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the pro duct has been dr opped or damag ed in any w ay,
and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
20)Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
21)Safety Check - Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
22)Heat - The product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
E7800-UL
- 3 -EN
0D05
A NOTE ABOUT RECYCLING
This product’ s packag ing materials are recyclab le and can be reused. Please dispose of an y materials in accordance with your local recycling regulations.
Batteries should never be thrown away o r incinerated but dispo sed of in accord ance with your local regulations
concerning chemical wastes.
The serial number of this product may be found on the back of the DVD player. No others have the same serial
number as yours. You should record the number and other v ital information here and retain this book as a permanent
record of your purchase to aid identification in case of thef t. Serial nu mb ers are no t kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
ABOUT COPYRIGHT
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
SUPPLIED ACCESSORIES
Remote control
(N9353UD)
T wo AA batteriesA/V cables
(approx. 100 cm long)
(WPZ0102LG008)
SYMBOLS USED IN THIS MANUAL
The following symbols appear below in some headings and notes in this manual, with the following meanings!
DVD
: Description refers to playback of DVD video discs.
FIJACIÓN DE IDIOMAS...................................................... 36
FIJACION ES DE V ÍD EO........... .......................... .............. ... 36
FIJACIONES DE AUDIO...................................................... 36
BLOQUEO DE PADRES....................................................... 37
OTRAS FIJACIONES............................................................ 37
■
LISTA DE CÓDIGOS DE IDIOM A S................. .. ..... 37
■
PRECAUCIONES DE MANEJO.......................... .. .. . 38
MANEJO DEL DIS C O................... .. .. .............. .............. ....... 38
■
GUÍA PARA SOLUCIÓN DE PROBLEMAS........... 39
E7800-01
- 5 -EN
0D05
FEATURES
●
Dolby Digital sound
This player can handle Dolby Digital surround sound
having 5.1 channels when con nected to a Dolby Digital decoder.
●
Still/fast/s lo w /s te p pl ay ba ck
Various playback modes are available including still
pictures, fast forward/reverse, slow motion and step
frames.
●
Random playba ck for audio CD
This player can shuffle the order of tracks to play
them in random order.
●
Program playback for au di o CD
You can program the order of tracks to play them in
any desired order.
●
DVD menus in a desired lang uage
You can display DVD menus in a desired language,
if available on a DVD.
●
Screen saver and auto pow er- of f fu nc ti on s
Screen saver is automatically activated when there is
no input from the player or the remote control for one
minute in stop mode.
The power is automatically turned off when there is
no input for 31 minutes in still or stop mode.
●
Subtitles in a desired language
You can select a desired languag e for the display subtitles, if that language is available on a disc.
●
Selecting a ca mera angle
You can select the desired camera angle, if a disc
contains sequences recorded from different angles.
●
Choices for audio language and sound mode
You can select the desired audio language and s ound
mode, if different languages and mod es are available
on a disc.
●
Parental lock
You can set the control level to limit playback of
discs which may not be suitable for children.
●
Automatic detection of discs
This player automatically detects if a loaded disc is
DVD or audio CD.
●
On-screen disp la y
Information about the current operation can be displayed on a TV screen, allowing you to confirm the
currently ac tive functions (such as program playback), on the TV screen using the remote contro l.
E7800-01
- 6 -EN
0D05
ABOUT THE DISCS
PLAYABLE DISCS
The following discs can be played back on this DVD
player.
Disc Size
12 cm
8 cm
12 cm
8 cm
(singles)
DVD
Video
Audio
CD
Logo
ContentsDisc Type
Sound
and
Pictures
Sound
This player conforms to the NTSC color system. You
cannot play discs recorded in other color systems such
as PAL or SECAM.
●
Some discs include region codes as shown below.
Maximum
Playback Time
Approx. 4 h
(single-sided)
Approx. 8 h
(double-sided)
Approx. 80 min
(single-sided)
Approx. 160 min
(double-sided)
74 min
20 min
●
Photo CD
(Never play back, otherwise malfunction may result.)
●
Video CD
(Never play back, otherwise malfunction may result.)
Any other discs without compatibility indications
DISC TYPES
[DVD]
Data on a DVD is divided into sections called "titles",
and then into subsections called "chapters", each of
which is given a title or chapter number . Play back con ditions are preset on some DVD video discs, and these
playback conditions take priority over user operations
on this player. If a function you selected do not run as
desired, refer to the manual accompanying the dis c.
The number inside the symbol refers to a region of
the world, and a disc encoded in a specific region
format can only be played back on DVD players with
the same region code.
The following discs cannot be played back on this
DVD player.
●
DVD with region codes ot he r tha n 1 or ALL .
●
DVD-ROM
●
DVD-R/DVD-RAM
(Never play back , oth erwise malf unct ion m ay result.)
●
CD-ROM
●
VSD
●
CDV
(Only plays back the audio part.)
●
CD-G
(Only plays back the sound.)
●
CD-R
(Never play back , oth erwise malf unct ion m ay result.)
●
CD-I
(Never play back , oth erwise malf unct ion m ay result.)
[AUDIO CD]
Data on an au dio CD is divided into sections called
"tracks", each of which is given a track number.
Example
Track 1Track 2Track 3Track 4Track 5Track 6
E7800-01
- 7 -EN
0D05
OPERATING CONTROLS AND FUNCTIONS
FRONT PANEL
REMOTE CONTROL
7
10
8
2
11
12
13
14
15
16
POWER
11223
4556
789
+10
0
SKIP
SELECT
PLAY
REV
MODE
STOP
TITLESETUP
SEARCH MODE
AUDIODISPLAY
ENTER
REPEAT
SUBTITLE
PAUSE
CLEAR
SLOW
FWD
OPEN/
CLOSE
DISC
3
4
MENU
RETURN
A
ANGLE
17
18
19
1.
Disc loading tray
2.
PLAY Button [page 13]
Starts playback of the disc
contents.
3.
STOP Button [page 14]
4.
OPEN/CLOSE Button [page 13]
Stops operation of the disc.
discs into or remove them from the tray.
5.
DISC Number Buttons [page 13]
desired disc or disc tray directly.
6.
DISC SELECT Button [page 13]
desired disc or disc tray.
7.
POWER Button [page 13]
Press to turn the power
on and off.
8.
SKIP Buttons [page 15]
Skip chapters or tracks to
a desired point.
4
5
6
28
3
27
26
25
-
24
B
23
22
21
20
Press to insert
Press to select a
Press to select a
12345
OPEN/CLOSE
DISC
1
2
PLAY
STOP
POWER
3
4
5
SELECT
6789
9.
Display, Remote Sensor Window
10.
Numeric Buttons [page 16]
11.
REV Button [page 15]
Fast reverses playback to a
desired point.
12.
PAUSE Button [page 14]
Pauses the current disc
operation.
13.
MODE Button [pages 16,17]
Activates program
playback or random playback mode.
14.
SETUP Button [page 21]
Press to enter the setup
mode or to change setup items.
15.
TITLE Button [page 14]
16.
CLEAR Button [pages 17]
17.
DISPLAY Button [page 20]
Displays the title menu.
Resets a setting.
Displays the current
status on the TV screen for checking purposes.
18.
SEARCH MODE Button [pages 15,16]
Press to lo-
cate a desired point.
19.
AUDIO Button [page 18]
Press to select a desired
audio language or sound mode.
20.
SUBTITLE Button [page 19]
Press to select a de-
sired subtitle language.
21.
REPEAT Button [page 16]
Repeats playback of the
current disc, title, chapter or track.
22.
ANGLE Button [page 19]
Press to change the camera angle to see the sequence being played back from
a different angle.
23.
A-B REPEAT Button [page 17]
Repeats playback
of a selected section.
24.
RETURN Button
25.
ENTER Button
26.
Arrow Buttons
Returns to the previous operation.
Press to accept a setting.
Use when making settings while
watching the display on a TV screen.
27.
MENU Button [page 13]
28.
FWD Button [page 15]
Displays the DVD menus.
Fast forwards playback to a
desired point.
E7800-01
- 8 -EN
0D05
REAR VIEW
29303132 33 34
Power Cord
29.
COAXIAL DIGITAL AUDIO OUT Jack
30.
S-VIDEO OUT Jack
31.
DISPLAYDISPLAYS DURING
Lit when a CD is inserted
Lit when a DVD is inserted
Displays a chapter or track number
DIGITAL AUDIO OUT
PCM / BITSTREAM
COAXIAL
32.
33.
34.
AUDIO OUTVIDEO OUTS-VIDEO OUT
RL
VIDEO OUT Jack
Right AUDIO OUT Jacks
Left AUDIO OUT Jacks
OPERATION
2
1
Power on
No disc inserted
Tray open
Tray closed
Tray rotation
During
search mode
Displays the time lapse of the
current title or track
Displays a title number
Power off
During disc
load
Disc setting
error
LOADING THE BATTERIES
1. Open the battery compartment
cover.
2. Insert two AA batteries, with
each one oriented correctly.
3. Close the cover.
Notes
●
Do not mix alkaline and manganese batteries.
●
Do not mix old and new batteries.
E7800-01
- 9 -EN
0D05
HOOKUPS
CONNECTING TO A TV
A/V-compatible or
wide screen TV
DIGITAL AUDIO OUT
PCM / BITSTREAM
COAXIAL
AUDIO OUTVIDEO OUTS-VIDEO OUT
RL
2
1
To VIDEO INPUT jackTo VIDEO OUT jack
To Right (red) and Left (white)
AUDIO INPUT jacks
To Right (red) and Left (white)
AUDIO OUT jacks
[Fig. 1]
FOR TVs WITH S-VIDEO INPUT JACK
Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy pictures at higher quality .
A/V-compatible or
wide screen TV
To S-VIDEO INPUT jack
To Right (red) and Left (white)
AUDIO INPUT jacks
To S-VIDEO OUT jack
DIGITAL AUDIO OUT
PCM / BITSTREAM
COAXIAL
To Right (red) and Left (white)
AUDIO OUT jacks
AUDIO OUTVIDEO OUTS-VIDEO OUT
RL
2
1
[Fig. 2]
CONNECTING TO A STEREO SYSTEM
A/V-compatible
or
wide screen TV
Stereo system
To VIDEO INPUT jack
or
To S-VIDEO
INPUT jack
To ANALOG AUDIO INPUT jacks
DIGITAL AUDIO OUT
To S-VIDEO OUT jack
PCM / BITSTREAM
To Right (red) and Left (white)
AUDIO OUT jacks
To VIDEO OUT jack
COAXIAL
AUDIO OUTVIDEO OUTS-VIDEO OUT
RL
2
1
[Fig. 3]
Notes
●
Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be distorted
due to the copy protection system.
●
Be sure to turn off the power to all components in the system before connecting another component.
●
Refer to the Owner’s Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
- 10 -EN
0D05
E7800-01
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGIT AL
INPUT JACKS, MD DECK OR DAT DECK
Use audio coaxial digital cables (commercially available) for the audio con nections .
To VIDEO INPUT jack
A/V-compatible
or
wide screen TV
or
To S-VIDEO
INPUT jack
To S-VIDEO OUT jack
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To COAXIAL DIGITAL
AUDIO INPUT jack
Notes
●
The audio source on a disc in a 5.1 chan nel Dolby Digital s urrou nd fo rmat cannot b e record ed as digital soun d
by an MD or DAT deck.
●
Be sure to turn off the power to all components in the system before connecting another component.
●
Refer to the Owner’s Manuals for the components to be connected to the DVD player.
●
Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a DVD using incorrect
settings may generate noise distortion, and may also damage the speakers.
●
When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you
select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
To VIDEO OUT jack
DIGITAL AUDIO OUT
PCM / BITSTREAM
COAXIAL
To COAXIAL DIGITAL
AUDIO OUT jack
AUDIO OUTVIDEO OUTS-VIDEO OUT
RL
2
1
[Fig. 4]
E7800-01
- 11 -EN
0D05
CONNECTING TO A DOLBY DIGITAL DECODER
OR DTS DECODER
If using this DVD player to play back a DVD in a 5.1 channel Dolby Digital surround or DTS surround format,
the DVD player outputs a Dolby Digital or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By
hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience
with powerful and high-quality surround sound of a professional standard such as can be heard in movie theaters.
Use audio coaxial digital cables (commercially available) for the audio con nections .
A/V-compatible
wide screen TV
Front speaker
(left)
or
To VIDEO INPUT jack
or
To S-VIDEO
INPUT jack
Center
speaker
Front speaker
(right)
To S-VIDEO OUT jack
To VIDEO OUT jack
DIGITAL AUDIO OUT
PCM / BITSTREAM
COAXIAL
To COAXIAL DIGITAL
AUDIO OUTVIDEO OUTS-VIDEO OUT
RL
2
1
AUDIO OUT jack
Dolby Digital
or DTS decoder
To COAXIAL DIGITAL
AUDIO INPUT jack
Surround
speaker
(left)
Surround
speaker
(right)
Subwoofer
[Fig. 5]
Notes
●
Be sure to turn off the power to all components in the system before connecting another component.
●
Refer to the Owner’s Manuals for the components to be connected to the DVD player.
●
If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
●
If connected to a DTS decoder, set DTS to ON for audio output in the setup mode.
●
Unless connected to a Dolby Digital decoder or a DTS decoder, set DOLBY DIGITAL and DTS to OFF for
audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may
also damage the speakers.
●
When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you
select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
E7800-01
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories. Confidential U npublished Works.
DTS is a trademark of Digital Theater Systems
Inc. in the United States of America.
- 12 -EN
0D05
PLAYING A DISC
PLAYING A DVD VIDEO
OR AN AUDIO CD
DVDCD
Getting started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD player.
(Change the input system to suit the DVD player, and
check that the sound volume is correct.)
1 Press the POWER button.
●
The power will turn on.
2 Press the OPEN/CLOSE button.
●
The disc loading tray will open.
3 Press the DISC SELECT button repeatedly or
the DISC Number button.
●
The desired disc tray moves to the front position.
4 Place a disc into the tray.
●
Make sure the disc is sitting properly in the correct
recess, with the label side up.
●
Repeat steps 3 and 4 to load more discs.
Notes
●
A "prohibited icon" may appear at
the bottom right on the TV screen
during operation, warning that a
prohibited operation has been encountered by the DVD player or
the disc.
●
If a disc is dirty or has scratches, the pictures may
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback.
●
With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles.
●
When the DVD player has finished playing the current disc, it will go to the stop mode.
●
You can not change the other disc during playback.
After the DVD player is stopped, press the
OPEN/CLOSE button.
USING THE DVD MENUS
DVD
Right side tray
Left side tray
5 Press the PLAY button.
●
The tray will close automatically, and playback will
then start from the first chapter or track of the disc on
the left side. You may need to press the PLAY button
for some discs when the tray has been closed by
pressing the OPEN/CLOSE button.
●
If the disc has not been set on the tray, the DVD
player will play the disc which is set on the right side
tray.
●
When you want to select the other disc, press the
DISC SELECT button repeatedly or the DISC Number button for your desired disc.
●
When you play back the DVD which a title menu is
recorded, the menu may appear on the screen. In this
case, refer to "USING THE TITLE MENU".
6 Press the STOP button to stop play.
Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a
selection menu for sound, language and other customized settings.
1 Press the MENU button.
●
The DVD menu will appear.
2 Select the desired title.
●
Press the arrow buttons (▼/▲/B/s) to change the
setting, and then press the ENTER button.
3 Playback will start from the selected title.
E7800-01
- 13 -EN
0D05
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.