Funai 6727FRE User Manual

Download

COLOR TV/VCR/DVD TRIPLE RECORDER COMBO

Owner’s Manual

6727FRE

SUPPLIED ACCESSORIES

This unit comes with the following accessories. Please confirm that all the accessories are included.

P Owner's Manual

(1EMN20176)

NOTE

If any of accessories are missing, please contact your dealer.

Thank you for purchasing this product. Please make sure to read this manual before using the product and pay particular attention to the Safety Instructions enclosed within. When you have finished reading this manual, store it in a safe place for easy access in the future.

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-605-8453 OR VISIT OUR WEB SITE AT http://www.funai-corp.com.

Before you use this unit, you need to complete connections. Refer to “Connections” on pages 10-13.

To record a program easily, refer to “Easy DVD recording” on pages 46-47 after connections are completed. (You CANNOT copy any copyright protected DVD disc with this unit.)

P Remote Control

(NE237UD)

P AA batteries x 2

INSTRUCCIONES EN ESPAÑOL INCLUDAS.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The important note is located on the rear of the cabinet.

TO REDUCE THE RISK OF ELEC-

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

IMPORTANT SAFETY INSTRUCTIONS

1. Read instructions - All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Cleaning - Unplug the TV/VCR/DVD from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6. Attachments - Do not use attachments not recommended by the TV/VCR/DVD manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this TV/VCR/DVD near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories - Do not place this TV/VCR/DVD on an unstable cart, stand, tripod, bracket, or table. The TV/VCR/DVD may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV/VCR/DVD.

Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

PORTABLE CART WARNING

S3126A

AMEUBLES - Cet appareil ne doit être placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l’installez sur un meuble à roulettes, déplacez les deux ensembles avec précaution. Un arrêt brusque, l’utilisation d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le renverser.

9. Ventilation - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV/VCR/DVD and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV/VCR/DVD on a bed, sofa, rug, or other similar surface. This TV/VCR/DVD should never be placed near or over a radiator or heat register.This TV/VCR/DVD should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to .

10.Power Sources - This TV/VCR/DVD should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TV/VCR/DVD intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization - This TV/VCR/DVD is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

SYMBOLE D'AVERTISSEMENT POUR

LES COMPOSANTES

APPAREIL ET MEUBLE A ROULETTES

S3126A

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING

S2898A

ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

IMPORTANT SAFETY INSTRUCTIONS

13.Outdoor Antenna grounding - If an outside antenna or cable system is connected to the TV/VCR/DVD, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14.Lightning - For added protection for this TV/VCR/DVD receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV/VCR/DVD due to lightning and power-line surges.

15.Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16.Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry - Never push objects of any kind into this TV/VCR/DVD through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/VCR/DVD.

18.Servicing - Do not attempt to service this TV/VCR/DVD yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.Damage Requiring Service - Unplug this TV/VCR/DVD from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into the

TV/VCR/DVD. c. If the TV/VCR/DVD has been exposed to rain or water. d. If the TV/VCR/DVD does not operate normally by follow-

ing the operating instructions. Adjust only those controls

that are covered by the operating instructions, as

improper adjustment of other controls may result in

damage and will often require extensive work by a qual-

ified technician to restore the TV/VCR/DVD to its normal

operation. e. If the TV/VCR/DVD has been dropped or damaged in

any way. f. When the TV/VCR/DVD exhibits a distinct change in

performance-this indicates a need for service.

20.Replacement Parts - When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.

21.Safety Check - Upon completion of any service or repairs to this TV/VCR/DVD, ask the service technician to perform routine safety checks to determine that the TV/VCR/DVD is in proper operating condition.

22.Heat - This TV/VCR/DVD product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

RECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.

FCC WARNING-

ment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

This equipment may generate or use radio frequency energy. Changes or modifications to this equip-

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT. ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

LOCATION

For safe operation and satisfactory performance of your TV/VCR/DVD, keep the following in mind when selecting a place for its installation:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

• Install unit in a horizontal position.

• Avoid locations subject to strong vibration.

• Do not place the TV/VCR/DVD near strong magnetic fields.

• Avoid moving TV/VCR/DVD to locations where temperature differences are extreme.

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to a Authorized Service Center for servicing.

• Do not put your fingers or objects into the TV/VCR/DVD disc loading tray or the cassette compartment.

• Do not place anything directly on top of the unit.

MOISTURE CONDENSATION WARNING

• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry.

REGARDING THIS MANUAL

• Product and company names appearing within this manual are trademarks or registered trademarks of their respective owners.

• Although special care has been taken to ensure that all information contained within this manual is correct at time of writing, the information is subject to change without notice.

• Make sure to read the manual carefully and follow all instructions contained within. We will not be held responsible for any damages caused by improper use or handling of this product.

• Reproducing this manual by any means, in whole or in part, is prohibited.

A NOTE ABOUT RECYCLING

This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.

PRECAUTIONS / SYMBOLS USED IN THIS MANUAL

The serial number of this product may be found on the back of this unit. No other TV/VCR/DVD has the same serial number as yours.You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

Date of Purchase Dealer Dealer Address

YMBOLS USED IN THIS MANUAL

The following is the description for the symbols used in this manual.

DVD-V DVD-RW (Video) DVD-RW (VR) DVD-R

: Refers to DVD video discs. : Refers to DVD-RW in Video mode. : Refers to DVD-RW in VR mode. : Refers to DVD-R discs. : Refers to Audio CDs.

Dealer Phone No. Model No. Serial No.

MP3

VCR

: Refers to CD-R/RW discs with MP3

files.

: Refers to VHS tapes. Use only cas-

settes marked .

ONTENTS

IMPORTANT SAFETY INSTRUCTIONS . . . . . . .2

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .4

SYMBOLS USED IN THIS MANUAL . . . . . . . . . .5

CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

COMPONENT NAMES . . . . . . . . . . . . . . . . . . . .7

Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . .8

Inserting Remote Control Batteries . . . . . . . . . . 9

Remote Control Range . . . . . . . . . . . . . . . . . . . 9

CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . .10

Connection of Main Unit . . . . . . . . . . . . . . . . . . . .10

Connection to Cable Box or Satellite Box . . . . . . . .10

Connection to Audio System . . . . . . . . . . . . . . . . .11

Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

OSD DISPLAY SETTING . . . . . . . . . . . . . . . . . .14

OSD LANGUAGE SETTING . . . . . . . . . . . . . . .15

CHANNEL SETTING . . . . . . . . . . . . . . . . . . . . .16

Auto Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Add/Delete Function . . . . . . . . . . . . . . . . . . . . . . .17

Selecting TV Stereo or SAP . . . . . . . . . . . . . . . . . .17

CLOCK SETTING . . . . . . . . . . . . . . . . . . . . . . .18

Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .18

Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . .19

DAYLIGHT SAVING TIME . . . . . . . . . . . . . . . . .20

SELECTING TV DISPLAY MODE . . . . . . . . . . .21

GUIDE TO DISPLAY MENUS . . . . . . . . . . . . . .21

OPERATING TV

TV FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . .22

Watching TV Program . . . . . . . . . . . . . . . . . . . . . .22

Setting Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . .22

Adjusting Picture . . . . . . . . . . . . . . . . . . . . . . . . . .23

Setting V-CHIP . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Setting MPAA Rating . . . . . . . . . . . . . . . . . . . . 24

Setting TV Rating . . . . . . . . . . . . . . . . . . . . . . 25

Setting V-CHIP Sub Ratings. . . . . . . . . . . . . . . 25

Setting V-CHIP Access Code . . . . . . . . . . . . . . 26

Selecting Closed Caption . . . . . . . . . . . . . . . . . . . .27

OPERATING VCR

VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . .28

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Normal Recording . . . . . . . . . . . . . . . . . . . . . . 28

One-Touch Timer Recording . . . . . . . . . . . . . . 29

Guide to Displays . . . . . . . . . . . . . . . . . . . . . . . . .29

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Auto Rewind-Eject. . . . . . . . . . . . . . . . . . . . . . 30

OPERATING DVD RECORDER

PLAYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

About DVD Playing . . . . . . . . . . . . . . . . . . . . . . . .31

Guide to Displays . . . . . . . . . . . . . . . . . . . . . . 31

Language Setting . . . . . . . . . . . . . . . . . . . . . . . . .32

Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Playback with Disc Menu. . . . . . . . . . . . . . . . . 35

Playback with Title Menu . . . . . . . . . . . . . . . . . 35

Special Playback . . . . . . . . . . . . . . . . . . . . . . . . . .36

Resume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Fast Forward / Fast Reverse . . . . . . . . . . . . . . 36

Slow Forward / Slow Reverse . . . . . . . . . . . . . 36

Step by Step . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Setting Marker . . . . . . . . . . . . . . . . . . . . . . . . 38

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Title/Chapter Search . . . . . . . . . . . . . . . . . . . . 38

Tr ack Search . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Repeat/Random/Program Play . . . . . . . . . . . . . . . .40

Repeat Play. . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Random Play. . . . . . . . . . . . . . . . . . . . . . . . . . 40

Program Play. . . . . . . . . . . . . . . . . . . . . . . . . . 41

Selecting AUDIO / VIDEO Menu . . . . . . . . . . . . . .41

Switching Audio Soundtrack. . . . . . . . . . . . . . . 41

Switching Subtitles . . . . . . . . . . . . . . . . . . . . . 43

Switching Camera Angles . . . . . . . . . . . . . . . . 43

Reducing Block Noise . . . . . . . . . . . . . . . . . . . 44

Virtual Surround Setting. . . . . . . . . . . . . . . . . . 44

GUIDE TO DISPLAYS ON SCREEN MENU . . . .45

EASY DVD RECORDING . . . . . . . . . . . . . . . . .46

RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . .48

About DVD Recording . . . . . . . . . . . . . . . . . . . . . .48

Video mode/VR (Video Recording) mode. . . . . 48

Recording Speed . . . . . . . . . . . . . . . . . . . . . . 48

Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Copy Control . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Format Setting. . . . . . . . . . . . . . . . . . . . . . . . . 49

Reformatting . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . .51

Recording TV Programs. . . . . . . . . . . . . . . . . . 51

Checking the recording picture quality . . . . . . . 52

One-Touch Timer Recording . . . . . . . . . . . . . . . . .53

Finalizing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Protecting Discs . . . . . . . . . . . . . . . . . . . . . . . . . .55

Connecting to External Video Products . . . . . . . . .56

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Recording from External Video Products . . . . . 56

DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

TIMER RECORDING . . . . . . . . . . . . . . . . . . . .58

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . .58

Suggestions for Timer Recording . . . . . . . . . . 60

EDITING DISCS . . . . . . . . . . . . . . . . . . . . . . . .61

About Disc Editing . . . . . . . . . . . . . . . . . . . . . . . . .61

Title List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Editing in Video Mode . . . . . . . . . . . . . . . . . . . 61

Editing in VR Mode . . . . . . . . . . . . . . . . . . . . . 61

Editing Discs in Video Mode . . . . . . . . . . . . . . . . .62

Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . 62

Naming Titles . . . . . . . . . . . . . . . . . . . . . . . . . 63

Setting Chapter Markers . . . . . . . . . . . . . . . . . 63

Editing DVD-RW Discs in VR Mode(Original) . . . . .64

Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . 64

Deleting Parts of Titles. . . . . . . . . . . . . . . . . . . 65

Naming Titles . . . . . . . . . . . . . . . . . . . . . . . . . 65

Setting Chapter Markers . . . . . . . . . . . . . . . . . 66

Setting Pictures for Thumbnails . . . . . . . . . . . . 66

Protecting Titles . . . . . . . . . . . . . . . . . . . . . . . 67

Releasing Title Protect. . . . . . . . . . . . . . . . . . . 67

Editing DVD-RW Discs in VR Mode(Playlist) . . . . . .68

Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . 68

Deleting Parts of Titles. . . . . . . . . . . . . . . . . . . 69

Naming Titles . . . . . . . . . . . . . . . . . . . . . . . . . 69

Setting Chapter Markers . . . . . . . . . . . . . . . . . 70

Setting Pictures for Thumbnails . . . . . . . . . . . . 70

Adding Titles to Playlist . . . . . . . . . . . . . . . . . . 71

Deleting Playlist. . . . . . . . . . . . . . . . . . . . . . . . 71

PARENTAL LOCK LEVEL SETTING . . . . . . . . .72

CHANGING SETUP MENU

SETUP MENU LIST . . . . . . . . . . . . . . . . . . . . .73

OTHERS

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . .74

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .78

LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . .78

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . .79

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .80

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . .82

OMPONENT NAMES

15 1612 1411109785

4 631718

213

2019 21 22

AUDIO OUT

COAXIAL

2 31

Main Unit

Front

Cassette compartment (VCR): Insert a tape here.

Disc tray (DVD): Place a disc on the tray when open.

S-VIDEO input jack (DVD only): Use to connect the

S-Video output of external video components with an S-Video cable.

VIDEO input jack: Use to connect external video

components with a standard video cable.

AUDIO (L/R) input jack: Use to connect external

video/audio components with standard audio cables.

Receiving window for remote control signal:

Sensor that receives signal from the remote control unit.

POWER button: Press to turn the unit on and off.

If timer programmings have been set, press to set the unit in timer-standby mode. Press to cancel the timerstandby mode, then turn the unit on.

VOLUME K/Lbuttons: Press to adjust the sound

level.

C STOP/A EJECT button (VCR): A EJECT button- Press to remove the tape from the

unit. C STOP button- Press to stop tape movement. Press to stop the proceeding timer recording in VCR.

B PLAY button (VCR): Press to start playback.

I RECORD button (VCR): Press once to begin recording. Press repeatedly to start a One-Touch Recording.

RECORD indicator (VCR): Blinks during VCR

recording.

DUBBING button (VCR➔DVD): Press to start VCR to

DVD duplication.

VCR/DVD indicator: Shows the operating status.

Indicator for VCR illuminates during VCR playing and one for DVD illuminates during DVD playing.

CHANNEL K/Lbuttons: Press to change the chan-

nel up or down. During DVD playback, press to change the DVD chapter.

STOP button (DVD): Press to stop playback or record-

ing. Press to stop the proceeding timer recording in DVD.

B PLAY button (DVD): Press to start or resume play.

I RECORD button (DVD): Press once to start recording. Press repeatedly to start a One-Touch Recording.

RECORD indicator (DVD): Illuminates when you

have programmed the DVD or VCR timer recording and blinks during DVD recording.

DUBBING button (VCR DVD): Press to start DVD to

VCR duplication.

A OPEN/CLOSE button (DVD): Press to open or close the disc tray.

HEADPHONE jack: To connect headphone (not sup-

plied) for personal listening.

CONTENTS / COMPONENT NAMES

Rear

AUDIO OUT COAXIAL jack (DVD sound only):

Use to connect an AV receiver with a coaxial digital input jack.

• Only DVD, CD and MP3 audio will be output from this jack.

AC Power Cord: Connect to a standard AC outlet to

supply power to this unit.

ANT. (Antenna input) jack: Use to connect an anten-

na, or cable system.

1 2

4 5

14 15

17 18

23 24

COMPONENT NAMES

Remote Control Unit

POWER button: Press to turn the unit on and off. If

timer programmings have been set, press to place the unit in timer-standby mode. Press to cancel the timer standby mode, then turn the unit on.

DISPLAY button: Press to display or change the on-

screen display.

Number button: Press to select channel numbers.

Press to select a title/chapter/track. Also press to enter values for the settings in the SETUP menu.

PICTURE button: Press to adjust the picture.

SETUP button: Press to display the setup menu.

TOP MENU button (DVD): Press to display the top menu.

ENTER button: Press to confirm or select menu items.

REC SPEED button: Press to switch DVD REC

MODE or VCR REC SPEED.

DVD RECORD button: Press once to start a

recording.

VCR AUDIO button: During playback a HiFi video tape,

press to change the audio out setting "HIFI" or "MONO."

TIME SEARCH button (VCR): Press to call up the

time search menu.

VCR RECORD button: Press once to start a

recording.

DUBBING button:

Press VCR DVD to start dubbing from video tape to DVD. Press VCR DVD to start dubbing from DVD to video tape.

SLEEP button: Press to activate the sleep timer.

MUTE button: Press to eliminate the sound temporarily.

CHANNEL

nel up and down.

G/ H

change the DVD chapter. Press to adjust the video tape playback tracking manually.

VOLUME XX/YYbuttons: Press to adjust the sound

level.

TIMER PROG. button: Press to display the timer

program setting menu.

DISC MENU button (DVD): Press to display the Disc

menu. Press to change "Original" and "Playlist". (VR mode only)

CLEAR button:

• During DVD operation Press to clear the password once entered, to cancel the programming for CD, to clear the selecting marker number in the marker setup mode or to clear the program once entered in the timer recording setting mode, etc.

• During VCR operation Press to reset the tape counter.

K/L

21 22

REC MONITOR button (DVD): Press to check the

video to be recorded before attempting.

RETURN button: Press to return to the previously

displayed menu screen.

PLAY B (DVD) button: Press to start or resume play.

STOP C (DVD) button: Press to stop playback or recording.

REW E button:

• During DVD operation During playback, press to fast reverse. During pause, press to play slow reverse.

• During VCR operation Press to rewind the tape or to view the picture rapidly in reverse during the playback mode.

F.FWD D button:

• During DVD operation During playback, press to play fast forward. During pause, press to play slow forward.

• During VCR operation Press to rapidly advance the tape or view the picture rapidly in forward during playback.

PAUSE F button: Press to pause or recording.

STOP C (VCR) button: Press to stop playback or recording.

PLAY B (VCR) button: Press to start playback.

K/L

buttons: Press to change the chan-

buttons: During DVD playback, press to

s / B buttons: Press to select items or settings.

Within 30 degrees

Approximately

22.8 feet (7 m)

Approximately

16.5 feet (5 m)

Approximately

16.5 feet (5 m)

Inserting Remote Control Batteries

1 Slide the cover of the remote control unit down

until the battery compartment appears.

Insert two AA size batteries, making sure that

their polarities should match the symbols shown inside the battery casing.

3 Slide and close the cover of the remote control

unit.

NOTE

• Do not inser t old and new batteries mixed together.

• Do not inser t different brands or types of batteries mixed together.

• Always insert new batteries for replacement.

COMPONENT NAMES

Remote Control Range

Operate the remote control within 30-degree angle on both sides of the infrared sensor on the main unit. You can operate the remote control from a distance of several feet away from the main unit.

NOTE:

Other devices that use infrared beams, sunlight, fluorescent lights may affect the range and effectiveness of the remote control. Make sure that this unit should be positioned where there is the minimum interference from other devices.

ONNECTIONS

Plug in the AC power cord of this unit.

Cable Signal

Connect

Antenna

AUDIO OUT COAXIAL

(Rear of main unit)

Connection of Main Unit

Connection to Cable Box or Satellite Box

(Cable box or

Satellite box)

OUT

Cable

Signal

AUDIO OUT COAXIAL

(Rear of main unit)

Select this connection when you want to view or record a scrambled channel. With this connection, channels cannot be changed on the TV/VCR/DVD unit. You can view or record ONLY the channels you have selected on the cable box or the satellite box.

• While you are recording, only the recorded channel can be viewed.

To select channels of the cable box or satellite box

1) Turn on this unit by pressing POWER button. Then, press the CHANNEL K/Lbuttons to select channel 3 or 4 (the same channel as the output channel of the cable box or satellite box).

2) At the cable box or satellite box, select the channel you want to view or record.

Note for the Cable TV System Installer:

This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as possible.

Connection to Audio System

• Before changing the connections or installing the unit, all devices should be turned off.

• Refer to each owner's manual for further information on other devices.

Receiver with Dolby Digital decoder

COAXIAL

Digital audio input jack

Audio Coaxial Digital cable

(available wherever consumer

electronics are sold)

CONNECTIONS

AUDIO OUT COAXIAL

AUDIO OUT

COAXIAL

(digital)

AUDIO OUT COAXIAL

NOTE:

• When you play a DVD disc with connecting TV/VCR/DVD to a receiver with a Dolby Digital decoder, set "Dolby Digital" to "Stream" for the "Digital Out" setting in the SETUP menu. (Refer to pages 12-13.)

• The audio source on a DVD disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck.

• If the receiver does not have a Dolby Digital decoder, set "Dolby Digital" to "PCM" for the "Digital Out" setting in the SETUP menu. Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to pages 12-13.)

• Set "Dolby Digital" to "PCM" for the "Digital Out" setting in the SETUP menu for connecting to an MD deck or DAT deck. (Refer to pages 12-13.)

• By hooking this unit up to a Multi-channel receiver with a Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel surround sound as heard in the movie theaters.

Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

NOTE:

• Only DVD, CD and MP3 audio will be available at the AUDIO OUT COAXIAL jack.

CONNECTIONS

Audio Setting

Choose the appropriate audio setting when connecting the unit to an external audio system (sold separately).

NOTE: DVD & CD Audio Only

• Only DVD and CD audio will be available to be amplified through the external audio system.

NOTE:

• Dynamic Range Control function is available only with discs recorded in the Dolby Digital format.

POWER

SETUP

///

ENTER

STOP C (DVD)

STOP C (VCR)

Press STOP C (DVD) or STOP C (VCR) button if you are playing a disc or tape.

1 Press POWER button to turn on the unit.

Press SETUP button to display SETUP/DISC menu.

SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

4 Select "Playback" using

press ENTER button. Option window will appear.

5 Select a desired item using

press ENTER button.

K/L

/s /Bbuttons, then

K/L

buttons, then

Digital Out

Set the digital audio output.

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

4:3 Letter Box

All

English

Original

OFF

4:3 Letter Box

All

English

Original

OFF

PCM

Dolby Digital

OFF

DVD

• Select a setting using K/ buttons, then press ENTER button.

Option window will appear. Proceed to step [A] or [B].

[A] Settings for PCM (Default: Auto)

Original

OFF

PCM

Auto 48kHz

trol

Dolby Digital

OFF

96kHz

dio

• Select a setting using K/Lbuttons, then press ENTER button.

Your setting will be activated. Auto : Select "Auto" for normal playback. 48kHz : If your amplifier/receiver is NOT compati-

ble with 96kHz PCM, select "48kHz". 96kHz sound will be output in 48kHz.

96kHz : If your amplifier/receiver is compatible

with 96kHz PCM, select "96kHz". 96kHz sound will be output.

NOTE:

When playing disc with copyright protection

• If you select "Auto", the sound will be down sampled at 48kHz.

• If you select "96kHz", no digital sound will be output. Select "Auto", so that outputting 48kHz digital sound.

[B] Settings for Dolby Digital (Default : Stream)

Original

OFF

PCM

dio

Dolby Digital

PCM Stream

OFF

trol

• Select a setting using K/Lbuttons, then press ENTER button.

Your setting will be activated. PCM : Convert the Dolby Digital into PCM 2

channel (stereo). When your amplifier/receiver is NOT compatible with Dolby Digital, set to "PCM".

Stream : Outputs a Dolby Digital signal.

When your amplifier has a Dolby Digital decoder, set to "Stream".

NOTE:

When playing a DVD-RW disc recorded in VR mode

• If the audio source on a disc is Dolby Digital format, set "Dolby Digital" to "PCM" so that you can switch to main (L), sub audio (R), or a mix of both (L/R) with your amplifier/decoder.

Dynamic Range Control (Default : ON)

Set to “ON” to compress the range between soft and loud sounds.

Fast Forward with Audio (Default : OFF)

Set to “ON” to hear the sound during playback in fast forward of x2.

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

Press SETUP button to exit SETUP menu.

DVD

4:3 Letter Box

All

English

Original

OFF

DVD

• Select a setting using K/

4:3 Letter Box

All

English

Original

OFF

buttons, then press ENTER button.

Your setting will be activated.

ON OFF

CONNECTIONS

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

DVD

4:3 Letter Box

All

English

Original

OFF

DVD

• Select a setting using K/

4:3 Letter Box

All

English

Original

OFF

buttons, then press ENTER button.

Your setting will be activated.

ON OFF

SD DISPLAY SETTING

POWER

SETUP

///

ENTER

STOP C (DVD)

STOP C (VCR)

Press STOP C (DVD) or STOP C (VCR) button if you are playing a disc or tape.

Press POWER button to turn on the unit.

2 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

Select "Display" using K/L/s /Bbuttons, then

press ENTER button. Option window will appear.

OSD Background Color (Default : 1 Green)

Set the OSD screen color. You can choose one from 1(Green), 2(Blue), and

3(Red).

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

Screen Saver

Caption

V-CHIP Setup

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

Screen Saver

Caption

V-CHIP Setup

VCR DVD

35%

English

10 minutes

OFF

VCR DVD

• Select a setting using K/

35%

1 2

English

10 minutes

OFF

buttons, then press ENTER button.

Your setting will be activated.

Screen Saver (Default : 10 minutes)

Set the time before the screen saver appears on the screen.

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

Screen Saver

Caption

V-CHIP Setup

VCR DVD

35%

English

10 minutes

OFF

5 Select a desired item using

K/L

buttons, then

press ENTER button.

OSD Background Transparency (Default : 35%)

Set the background transparency of OSD screen. You can choose between 0% through 100%.

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

Screen Saver

Caption

V-CHIP Setup

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

Screen Saver

Caption

V-CHIP Setup

VCR DVD

35%

English

10 minutes

OFF

VCR DVD

• Select a setting using K/

100%

35%

85%

English

10 minutes

OFF

buttons, then press ENTER

70% 50%

button.

35% 25% 10% 0%

Your setting will be activated.

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

Screen Saver

Caption

V-CHIP Setup

Press SETUP button to exit SETUP menu.

VCR DVD

• Select a setting using K/

35%

OFF

English

5 minutes 10 minutes

10 minutes

15 minutes

OFF

30 minutes

buttons, then press ENTER button.

Your setting will be activated.

SD LANGUAGE SETTING

You can select the language for on-screen display (OSD).

POWER

SETUP

///

ENTER

1 Press POWER button to turn on the unit.

Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

4 Select "Display" using

K/L

/s /Bbuttons, then

press ENTER button. Option window will appear.

5 Select "OSD Language" using

K/L

buttons, then

press ENTER button.

NOTE:

• Default OSD language setting is English.

6 Select your desired language among "English",

"Français" and "Español" using K/Lbuttons, then press ENTER button.

Your language setting will be activated.

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

Screen Saver

Caption

V-CHIP Setup

Press SETUP button to exit SETUP menu.

VCR DVD

35%

English

English Français

10 minutes

Español OFF

OSD DISPLAY SETTING / OSD LANGUAGE SETTING

HANNEL SETTING

It is recommended that you should preset channels in your area using "Auto Preset" in the Channel Preset of the SETUP menu.

Auto Preset

Number

SETUP

ENTER

Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

3 Select "Channel" using

press ENTER button. Channel Preset menu will appear.

K/L

CHANNEL K/

///

RETURN

/s /Bbuttons, then

5 Press SETUP button to exit.

You can select only the channels memorized in this unit by using the CHANNELK/Lbuttons.

NOTE:

• If CHANNEL K/Lbuttons does not allow you to select chan-

nels after presetting, try Auto Preset again.

To select a channel : You can select a channel by directly entering

channel using the Number buttons on the remote control.

Notes for using the Number buttons:

• When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number. (For example: 117, press 1,1,7)

•You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).

•You can select the line input mode (“AUX”). To select “AUX” by pressing [0], [0]. Details are on page 56.

Auto Presetting Now

K/L

buttons, then

CH 18

4 Select "Auto Preset" using

press ENTER button. The unit will begin scanning channels available

in your area. To cancel the Auto Preset during scanning: Press RETURN button or SETUP button to cancel.

NOTES:

• If the Auto Preset is cancelled before completing the preset, some channels that have not been preset may not be available.

• The selection will depend on how you receive the TV channels.

• Be sure to have some type of reception, cable or antenna

connected to the TV before presetting channels.

Add/Delete Function

The channels you no longer receive or seldom watch can be deleted from the memory. You can also add channels into memory.

The next channel number will appear so that you can continue adding or deleting channels.

7 Press SETUP button to exit.

Selecting TV Stereo or SAP

SETUP

///

ENTER

1 Press SETUP button to display SETUP/DISC menu.

SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

Select "Channel" using K/L/s /Bbuttons, then

press ENTER button. Channel Preset menu will appear.

4 Select "Manual Preset" using

press ENTER button. Manual Preset menu will appear.

Setup > Channel Preset > Manual Preset

CH2

Add Delete

K/L

buttons, then

You can select stereo or SAP (Secondary Audio Program). "Stereo" has been selected as the default.

SETUP

///

ENTER

1 Press SETUP button to display SETUP/DISC menu.

SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

Select "Channel" using K/L/s /Bbuttons, then

press ENTER button. Channel Preset menu will appear.

4 Select "TV Audio Select" using

then press ENTER button. Option window will appear.

K/L

buttons,

CHANNEL SETTING

To select the channel to add or delete;

Press Press

button to move to a lower channel number.

button to move to a higher channel

number.

Setup > Channel Preset > Manual Preset

CH18

Add Delete

Select "Add" or "Delete" using K/Lbuttons, then

press ENTER button. The channel number will be added or deleted

from the channel memory.

Setup > Channel Preset

Auto Preset

Manual Preset

TV Audio Select

Select "Stereo" or "SAP" using K/Lbuttons,

VCR DVD

Stereo

SAP

then press ENTER button. Stereo:

Outputs main-audio.

SAP: (Secondary Audio Program)

Outputs second audio channel. Refer to the item in "Glossary" on page 79 for more information.

6 Press SETUP button to exit.

To view TV channels, press CHANNELK/Lbuttons.

LOCK SETTING

Set the clock before you try timer recording. If a Public Broadcasting Station (PBS) is available in your area, follow Auto Clock Setting below. If not, follow Manual Clock Setting on page 19.

Important

You must know the local PBS station in your area.

Auto Clock Setting

NOTE:

• Make sure that the antenna or cable are connected to the unit.

• If the TV/VCR/DVD is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR/DVD must be set to the output channel of the cable converter box or satellite box (usually channel 3 or 4), to be able to set up or correct the clock automatically.

POWER

Number

SETUP

///

ENTER

5 Select "Manual" using

K/L

buttons, then press

ENTER button.

Enter your PBS channel number using Number buttons or K/Lbuttons, then press ENTER button.

Setup > Clock

Clock Setting

Auto Clock Setting

Daylight Saving Time

Press SETUP button to exit.

VCR DV D

Set Channel No.

OFF

Auto

CH1

Manual

Off

7 Press POWER button to turn off the unit.

This unit will search for the time when the power is off. Leave it off for several minutes to give this unit time to set the clock.

NOTE:

• The clock may set itself automatically after you connect the antenna/cable signal to this unit and plug in the power cord. After setting, turn the power on to check the current time appeared on the TV screen is correct.

• If the current time is not displayed or the displayed clock is not correct, set the clock manually.

1 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

Select "Clock" using K/L/s /Bbuttons, then

press ENTER button. Clock menu will appear.

VCR DV D

OFF

Off

Manual

Off

K/L

buttons,

4 Select "Auto Clock Setting" using

then press ENTER button. Option window will appear.

Setup > Clock

Clock Setting

Auto Clock Setting

Daylight Saving Time

Manual Clock Setting

SETUP

///

ENTER

1 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

2 Select "SETUP" using

ENTER button. SETUP menu will appear.

s /B

buttons, then press

09 : 24 AM

VCR DV D

OFF

Setup > Clock

Clock Setting

Auto Clock Setting

Daylight Saving Time

JAN / 12 / 2004 (MON)

NOTE:

•Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 3 seconds when you set the clock manually.

Press K/Lbuttons to select AM or PM, then

press ENTER button. Clock menu will appear. The settings will be acti-

vated.

Setup > Clock

Clock Setting

Auto Clock Setting

Daylight Saving Time

VCR DV D

OFF

3 Select "Clock" using

K/L

/s /Bbuttons, then

press ENTER button. Clock menu will appear.

Select "Clock Setting" using K/Lbuttons, then

press ENTER button. A clock setting window will appear.

- - : - -

VCR DV D

OFF

Setup > Clock

Clock Setting

Auto Clock Setting

Daylight Saving Time

- - - / - - / - - - - ( - - - )

Press ENTER button. Default date will appear.

5 Enter the date (month / day / year) using

buttons. Press s /Bbuttons to move the cursor.

12 : 00AM

VCR DV D

OFF

Setup > Clock

Clock Setting

Auto Clock Setting

Daylight Saving Time

JAN / 12 / 2004 (MON)

K/L

8 Press SETUP button to exit.

Although seconds are not displayed, they begin counting from zero.

When "Auto Clock Setting" is changed to "Manual", select "OFF" using the following steps.

Repeat steps [1] to [3] in "Manual Clock Setting".

4 Select "Auto Clock Setting" using

then press ENTER button.

5 Select "OFF" using

ENTER button.

Press SETUP button to exit.

K/L

buttons, then press

K/L

buttons,

CLOCK SETTING

6 Enter the time (hour / minute) using

tons.

s /B

Press

buttons to move the cursor.

K/L

but-

AYLIGHT SAVING TIME

When Daylight Saving Time is ON, the clock will automatically move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October.

SETUP

///

ENTER

1 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

Clock Setting

Auto Clock Setting

Daylight Saving Time

s /B

buttons, then press

VCR DV D

OFF

ON OFF

K/L

buttons, then

2 Select "SETUP" using

ENTER button. SETUP menu will appear.

Select "Clock" using K/L/s /Bbuttons, then

press ENTER button. Clock menu will appear.

Select "Daylight Saving Time" using K/Lbut-

tons, then press ENTER button. Daylight Saving Time options will appear.

Setup > Clock

5 Select "ON" or "OFF" using

press ENTER button. Choose "ON" when currently observing the day-

light saving time.

Press SETUP button to exit.

ELECTING TV DISPLAY MODE

Press DISPLAY button.

Press

DISPLAY

button.

Press DISPLAY button.

COUNT 0:00:03SLP

VCR C

VCR status display

DVD-RW

SP 1:25 Rem.

CH 21

Video mode

11 0:00:00

DVD status display

Time and Channel display

Current

time

Current channel number

CH 21

Press DISPLAY button.

12:00AM

DISC C

You can select the TV display mode to your viewing preference for DVD viewing.

"4:3 Letter Box" has been selected as the default.

SETUP

///

ENTER

1 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

2 Select "SETUP" using

ENTER button. SETUP menu will appear.

s /B

buttons, then press

3 Select "Playback" using

K/L

/s /Bbuttons, then

press ENTER button. Playback menu will appear.

Select "TV Mode" using K/Lbuttons, then press

ENTER button. Option window will appear.

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

DVD

16:9 Wide

4:3 Letter Box

4:3 Pan & Scan

English Original

OFF

"4:3 Letter Box": black bars appear on the top and bottom of the screen.

"4:3 Pan & Scan" : full height picture with both sides trimmed.

Select a desired option using K/Lbuttons, then

press ENTER button.

Press SETUP button to exit.

UIDE TO DISPLAY MENUS

Every time you press DISPLAY button, the display will change as follows:

For details, see page 31.

Note:

This menu is available only when a disc is inserted into the unit.

For details, see page 29.

DAYLIGHT SAVING TIME / SELECTING TV DISPLAY MODE / GUIDE TO DISPLAY MENUS

OPERATING TV

POWER

CHANNEL K/

VOLUME X/

Number

SLEEP TIMER [OFF]

SLEEP

V FUNCTIONS

Watching TV Program

Press POWER button to turn on the unit.

2 Select the desired channel using CHANNEL

K/L

buttons or the Number buttons on the

remote control. If the TV/VCR/DVD is connected to a cable box

or satellite box, the TV/VCR/DVD must be on channel 3 or channel 4, then the channel to be viewed must be selected on the cable box or satellite box.

3 Adjust the volume to the desired listening level

using VOLUMEX/Ybuttons.

4 Adjust picture controls for a natural looking

image. Refer to "Adjusting Picture" on page 23.

Setting Sleep Timer

The sleep timer function automatically turns off the power at a specified time period.

1 Press SLEEP button.

Sleep timer menu will appear.

2 Press SLEEP button repeatedly to change the

sleep time. The timer can be set up to 2 hours, by 30 min-

utes each time you press SLEEP button.

Degaussing

Magnetism from nearby appliances and unshielded speaker systems might affect the color of the TV picture.

If this happens, move this TV/VCR/DVD away from the appliance. If the color is still not correct, unplug the power cord, then plug it in again 30 minutes later.

3 To cancel the sleep timer, press SLEEP button

repeatedly until "SLEEP TIMER [OFF]" is displayed.

NOTE:

• If you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time setting will be lost.

• This function does not operate during Recording mode.

Adjusting Picture

PICTURE

///

1 Press PICTURE button.

The adjustments you can make are as follows:

BRIGHT

2 Select the setting item using

NOTE:

•You can use also PICTURE button to select the setting item.

K/L

buttons.

Adjust using s /Bbuttons.

BRIGHT

CONTRAST

COLOR

TINT

SHARPNESS

to decrease brightness

to decrease contrast

to pale

to purple

to soft

to increase brightness

to increase contrast

to brilliant

to green

to clear

CONTRAST

COLOR

SHARPNESS

OPERATING TV

TV FUNCTIONS

TINT

NOTE:

• In the above steps, the picture adjustment display will disappear automatically in about 5 seconds if you do not press any buttons.

ENTER

SETUP

///

Number

• G: General Audience

• PG: Parental Guidance suggested.

• PG-13: Unsuitable for children under 13

• R: Restricted; under 17 requires accompanying parent or adult guardian

• NC-17: No one under 17 admitted

• X: Mature audience only

G[VIEW] PG [VIEW] PG-13 [VIEW] R [VIEW] NC-17 [VIEW] X [VIEW]

- V-CHIP SET UP -

TV RATING MPAA RATING CHANGE CODE

ACCESS CODE

– – – –

OPERATING TV

TV FUNCTIONS

Setting V-CHIP

V-CHIP enables parents to prevent their children from watching inappropriate material on TV.

V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels and Emergency Broadcast System signals), then denies access to programming if the program's rating meets or exceeds the limitations you select. In this case, a "PROTECTED PROGRAM by..." message appears on the TV screen.

To block certain ratings, follow the steps below.

NOTE:

• Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING).

•You cannot access the menu when the "PROTECTED PROGRAM by..." message appears. In this case, change to an unblocked channel, then press SETUP button.

4 Select "V-CHIP Setup" using

K/L

buttons, then

press ENTER button. "ACCESS CODE" screen will appear.

5 Enter the 4-digit access code using Number but-

tons. The default access code is "0000". If you have

not set a personal access code, enter "0000".

6 Select "MPAA RATING" using

press ENTER button.

7 Select the desired limitation using

K/L

buttons, then

K/L

buttons.

Setting MPAA Rating

Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

2 Select "SETUP" using

ENTER button. SETUP menu will appear.

3 Select "Display" using

press ENTER button. Display menu will appear.

s /B

buttons, then press

K/L

/s /Bbuttons, then

Then press ENTER button to select [BLOCK] or [VIEW].

NOTE:

• When you select a rating category and change it to [BLOCK], all higher ratings will change to [BLOCK] automatically. Also, the lower ratings will change to [VIEW] automatically.

• When you turn "G" to [BLOCK] or [VIEW], all ratings will change to [BLOCK] or [VIEW] automatically.

8 Press SETUP button to exit.

Rating Category Explanations

Setting TV Rating

TV-PG [BLOCK]

D [BLOCK] L [BLOCK] S [BLOCK] V [BLOCK]

TV-Y7 [BLOCK]

FV [BLOCK]

• TV-Y: Appropriate for all children

• TV-Y7: Appropriate for children seven and older

• TV-G: General Audience

• TV-PG: Parental Guidance suggested.

• TV-14: Unsuitable for children under 14

• TV-MA: Mature audience only

TV-Y [VIEW] TV-Y7 [VIEW] TV-G [VIEW] TV-PG [VIEW] TV-14 [VIEW] TV-MA [VIEW]

- V-CHIP SET UP -

TV RATING MPAA RATING CHANGE CODE

ACCESS CODE

– – – –

1 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

Select "Display" using K/L/s /Bbuttons, then

press ENTER button. Display menu will appear.

• The sub ratings that are set to [BLOCK] appear next to the rating category in TV RATING menu.

• When you turn "TV-Y" to [BLOCK] or [VIEW], all ratings will change to [BLOCK] or [VIEW] automatically.

Press SETUP button to exit.

Rating Category Explanations

4 Select "V-CHIP Setup" using

K/L

buttons, then

press ENTER button. "ACCESS CODE" screen will appear.

Enter the 4-digit access code using Number

buttons. The default access code is "0000". If you have

not set a personal access code, enter "0000".

Select "TV RATING" using K/Lbuttons, then

press ENTER button.

Select the desired limitation using K/Lbuttons.

Setting V-CHIP Sub Ratings

When you select TV-Y7, TV-PG, TV-14 or TV-MA and press ENTER button, the sub-rating menu will appear.

If you select the rating category (example: TV-PG) and change it to [BLOCK] or [VIEW], the sub-ratings (example: V for Violence) will change to [BLOCK] or [VIEW] automatically.

You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set to [BLOCK]. To set the sub-ratings individually, follow the procedure below.

NOTE:

• When you select TV-Y7: Select "FV" (Fantasy Violence) using K/Lbuttons.

Then, press ENTER button to select [BLOCK] or [VIEW]. Press SETUP button to exit.

• When you select TV-PG, TV-14 or TV-MA: Select "D" (Suggestive Dialog), "L" (Coarse Language), "S" (Sexual Situation) or "V" (Violence) using K/Lbuttons.

OPERATING TV

TV FUNCTIONS

Then press ENTER button to select [BLOCK] or [VIEW].

NOTE:

• Refer to the next section, “Setting V-CHIP Sub Ratings” for the details about the sub-rating menu of TV-Y7, TV-PG, TV14 or TV-MA.

• When you select a rating category and change it to [BLOCK], all higher ratings will change to [BLOCK] automatically. Also, the lower ratings will change to [VIEW] automatically.

Press ENTER button to select [BLOCK] or [VIEW], then press SETUP button to exit.

• When you select TV-MA, "D" will not appear.

ENTER

SETUP

///

Number

ACCESS CODE

– – – –

NEW CODE

– – – –

CONFIRM CODE

– – – –

- V-CHIP SET UP -

TV RATING MPAA RATING CHANGE CODE

OPERATING TV

TV FUNCTIONS

Setting V-CHIP Access Code

To change the access code, follow the procedure below.

1 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

Select "Display" using K/L/s /Bbuttons, then

press ENTER button. Display menu will appear.

4 Select "V-CHIP Setup" using

press ENTER button. "ACCESS CODE" screen will appear.

K/L

buttons, then

6 Select "CHANGE CODE" using

K/L

buttons,

then press ENTER button.

The following screen will appear.

7 Enter the desired access code in NEW CODE

box using Number buttons, then enter the same code in CONFIRM CODE box.Your new access code is set. The display returns to "V-CHIP SET UP" menu.

NOTE:

• If the code in CONFIRM CODE does not match the code in NEW CODE, repeat step [7], making sure you enter exactly the same new code in CONFIRM CODE box.

• If a power failure occurs, the access code returns to the default access code, "0000".

• If you connect the power cord to an AC outlet that is controlled by a wall switch, the access code will be erased every time you turn off the power at the wall switch. The access code returns to the default access code.

Enter the 4-digit access code using Number but-

tons. The default access code is "0000". If you have

not set a personal access code, enter "0000".

8 Press SETUP button to exit.

If You Forget Your Access Code

Return the access code to the default code, "0000". To restore "0000" as the personal access code, unplug the TV's power cord for 10 seconds, then plug it in again.

Selecting Closed Caption

Setup > Display

OSD Background Transparency

OSD Background Color

OSD Language

Screen Saver

10 minutes

English

35%

Caption

V-CHIP Setup

OFF

VCR

OFF CAPTION 1 CAPTION 2 TEXT 1 TEXT 2

ENTER

SETUP

///

You may view specially labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either dialogue captions or text added to the display.

1 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

2 Select "SETUP" using

ENTER button. SETUP menu will appear.

3 Select "Display" using

press ENTER button. Display menu will appear.

Select "Caption" using K/Lbuttons, then press

ENTER button. Option window will appear.

5 Select a desired option using

press ENTER button. Select “OFF” to cancel the closed caption sys-

tem.

s /B

buttons, then press

K/L

/s /Bbuttons, then

K/L

buttons, then

OPERATING TV

TV FUNCTIONS

Press SETUP button to exit.

NOTE:

• If the TV/VCR/DVD displays a black box on the TV screen, this means that the TV/VCR/DVD is set to the TEXT mode. To clear screen, select “CAPTION 1”, “CAPTION 2” or “OFF”.

OPERATING VCR

CR FUNCTIONS

Playback

VCR

POWER

CHANNEL K/

///

PLAY B (VCR)

STOP C (VCR)

1 Press POWER button on the remote control or

the main unit.

Insert a prerecorded tape, then press PLAY B

(VCR) button to begin playback.

NOTE:

• When a tape without the record tab is inserted, the unit will start playback automatically.

•Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press the CHANNELK/Lbuttons on the main unit or CHANNELK/Lbuttons on the remote control.

Recording

Normal Recording

Before recording, make sure:

• Stereo or SAP is selected (page 17).

• The desired channel should be selected by pressing the Number buttons on the remote control or

CHANNELK/Lbuttons on the main unit.

A tape with a record tab should be loaded inside the unit.

•

The desired recording speed should be selected in SP (standard play) or SLP (super long play) mode by pressing REC SPEED button twice on the remote control. Use K/Lbuttons to change the recording speed.

•

Refer to page 58 for instructions on timer recording.

VCR C

Recording speed:

Ta pe speed

Type of tape T160T120

Number

Recording/Playback Time

T60

2-2/3hours2hours1hourSP mode

8hours6hours3hoursSLP mode

CHANNEL K/

VCR

3 Press STOP C (VCR) button to stop playback.

4 Press C STOP/A EJECT button on the main

unit to eject the tape.

REC SPEED

PAUSE F

VCR RECORD

Press VCR RECORD button to begin the recording.

To temporarily stop recording, press PAUSE F button. Press VCR RECORD button to resume the recording. When 5 minutes have passed since the unit entered Pause mode, the recording will automatically stop.

Press STOP C (VCR) button when the recording

is completed.

NOTES:

• You can ONLY watch the same TV program that is being

recorded.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record tab. To record on it later,cover the hole with cellophane tape.

STOP C (VCR)

Record tab

One-Touch Timer Recording

Time Search

VCR

This feature allows you to set the recording length simply by pressing I RECORD (VCR) button on the main unit.

C STOP / A EJECT

I RECORD

(VCR)

1 During normal recording, press I RECORD (VCR)

button on the main unit to begin one-touch timer recording.

You can select a fixed recording time by pressing the I RECORD (VCR) button on the main unit repeatedly.

(Normal recording)

(0:30) (1:00)

(7:30)(8:00)

When one-touch timer recording finishes, the unit will turn off automatically.

To cancel the one-touch timer recording within the specified time, press STOP C (VCR) button.

NOTE:

• If One-Touch Timer Recording finishes in VCR during playback or Record mode in DVD, the VCR will be in Stop mode and the DVD keeps the current mode.

Guide to Displays

Press DISPLAY button repeatedly to bring up the display for VCR status.

HIFIVCR C

COUNT 0:00:03SLP

1. Status of the current tape appears for 5 seconds

2. A recording speed appears for 5 seconds

3. Indicates a Tape Counter

4. Audio status of the played tape

VCR

This feature allows you to go to a specific point on a tape by entering the exact amount of time you wish to skip.

///

TIME SEARCH

1 Press TIME SEARCH button.

Time search menu will appear.

Enter your desired time to skip using K/Lbut-

tons.

TIME SEARCH

2:50

Press s /Bbuttons to start time search.

Forward or Reverse

If you want to move a tape forward, press ton.

If you want to move a tape backward, press button.

After time search, the unit will play the tape automatically.

NOTES:

• Time Search function is not available during recording.

• To stop the time search, press STOP CC(VCR) button at

step [3].

• To exit the time search menu, press RETURN button at

step [2].

• If a tape reaches to the end during the search, this unit

will cancel the search and rewind the tape.

but-

OPERATING VCR

VCR FUNCTIONS

OPERATING VCR

VCR FUNCTIONS

Other Functions

VCR

CHANNEL K/

CLEAR

STOP C (DVD)

VCR AUDIO

PAUSE F

To cue or review picture during playback (Picture Search):

Press g or h buttons during playback. Press it again and the unit will search in super high

speed. (in the SLP mode only)

To freeze the picture on TV screen during playback (Still mode):

Press PAUSE F button. Each time you press the button, the picture will move forward by one frame.

If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing the

CHANNELK/Lbuttons.

E / D

• When you want to enjoy the sound in monaural, select "MONO".

Monaural

program

HIFI

R-channelL-channel

Monaural

Main audio

program

Second audio

program

Your Selection

Type of recorded tape

non Hi-Fi tapes

Hi-Fi tapes recorded in Hi-Fi stereo

Hi-Fi tapes

recorded main

audio program

Hi-Fi tapes

recorded second

audio program

Main audio

Second audio

Auto Rewind-Eject

• When the end of a tape is reached during recording, playback or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the TV/VCR/DVD will eject the tape.

• The tape will not auto-rewind during timer

recording or One-Touch Timer Recording.

MONO

Monaural

L+R

Main audio

program

Second audio

program

VCR

Counter Reset:

Press CLEAR button. The counter appears on the TV screen. Press CLEAR button again to reset.

To playback in slow motion:

Press PAUSE F button during playback, then press D button. Playback in slow motion will start.

If noise bars appear on the TV screen, you can reduce them by pressing CHANNELK/Lbuttons.

NOTE:

• Still/Slow/Pause mode will be automatically cancelled in 5 minutes to prevent damage to the tape and the video head.

•To return to playback from the Picture Search/Still/Slow mode, press PLAY B (VCR) button.

When you playback a tape recorded in Hi-Fi stereo:

Press VCR AUDIO button on the remote control to select Hi-Fi or MONO for playback sound mode.

• When you want to enjoy the sound in stereo, select "HIFI".

OPERATING DVD RECORDER

LAYING

About DVD Playing

Before you play DVD discs, read the following information.

Playable discs

This unit is compatible to play the following discs. To play a DVD, make sure that it meets the requirements

for Region Codes and Color Systems as described below. Discs with the following logos can be played on the unit. Other Disc types are not guaranteed to play.

Color systems

LogoDisc

DVD VIDEO

Region codes

This unit has been designed to play DVD discs with Region One (1). DVDs must be labeled for ALL regions or for Region 1 in order to play on this unit.

You cannot play DVDs labeled for other regions. Make sure to check the symbols below on your DVDs. If these region symbols are not found on your DVD, you cannot play that DVD in this unit.

DVD-RW (VIDEO/VR MODE)

DVD-R (VIDEO MODE)

CD-DA (AUDIO CD)

CD-R (CD-DA FORMAT, MP3 files)

CD-RW (CD-DA FORMAT, MP3 files)

DVDs are recorded in different color systems throughout the world.The most common color systems are NTSC (which are used primarily in the United States and Canada), PAL and SECAM. This unit uses NTSC, so DVDs you play must be recorded in the NTSC system. You cannot play DVDs recorded in other color systems.

Guide to Displays

Press DISPLAY button repeatedly to bring up the display menu for DVD status. This menu will give you the information on the playing disc. Some operations are available while disc is playing.

11 0:00:00

DISC

DVD-RW

Video mode

SP 1:25 Rem.

CH 1

NOTE:

This menu is available only when a disc is inserted into the unit.

The number inside the globe refers to region of the world. Region 1 represents the United States, Canada, Bermuda, the U.S.Virgin Islands and small regions near Australia.

A DVD labeled for a specific region can only play on the unit with the same region code.

DVD playback

The contents of DVD disc are generally divided into titles. Titles may be further subdivided into chapters.

Start Rec. Stop/Start Stop Rec.

Title 1 Title 2

Chapter 1 Chapter 1Chapter 2 Chapter 3 Chapter 2

1. Indicates a disc type and a format mode.

2. Indicates a recording speed and possible recording time left.

3. Indicates a current channel number.

4. Indicates a title number, chapter number and the time elapsed of disc play.

5. Icon Legend:

: Search

: Audio

: Subtitle

: Angle (except VR mode)

: Repeat

: Mar ker

: Noise Reduction

: Zoom

: Virtual Surround

OPERATING DVD RECORDER

VCR FUNCTIONS / PLAYING

OPERATING DVD RECORDER

PLAYING

Language Setting

NOTE:

• Only the languages supported by the disc can be selected.

Number

SETUP

///

ENTER

STOP C (DVD)

STOP C (VCR)

Press STOP C (DVD) or STOP C (VCR) button if you are playing a disc or tape.

Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

2 Select "SETUP" using

ENTER button. SETUP menu will appear.

s /B

buttons, then press

Audio Language (Default : Original)

Set the Audio language.

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

DVD

4:3 Letter Box

All

English

Original

OFF

DVD

• Select a setting using K/

4:3 Letter Box

All

Original

English

Original

French

OFF

Spanish Other

OFF

buttons, then press ENTER button.

Your setting will be activated.

Subtitle Language (Default : OFF)

Set the subtitle language.

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

DVD

4:3 Letter Box

All

English

Original

OFF

3 Select "Playback" using

K/L

/s /Bbuttons, then

press ENTER button. Option window will appear.

Select a desired item using K/Lbuttons, then

press ENTER button.

NOTE:

•Audio Language setting may not be available to some discs.

•You can change or switch off the subtitles on a DVD disc also from the disc menu if it is available.

Disc Menu Language (Default : English)

Set the language for Disc Menu.

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

DVD

4:3 Letter Box

All

English

Original

OFF

DVD

• Select a setting using K/

4:3 Letter Box

All

English

French

Original

Spanish

OFF

Other

OFF

buttons, then press ENTER button.

Your setting will be activated.

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

DVD

• Select a setting using K/

4:3 Letter Box

All

OFF

English

Original

French

OFF

Spanish Other

OFF

buttons, then press ENTER button.

Your setting will be activated.

If "Other" is selected, press 4-digit code using Number buttons.

Setup > Playback

TV Mode

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

4:3 Letter Box

All

English

French

Original

Spanish

OFF

Other

Code Input

- - - -

OFF

• When you finish entering the code, press ENTER button. Refer to the language code table on page 78.

5 Press SETUP button to exit SETUP menu.

Basic Playback

VR mode:

Playback

DVD-R

POWER

TOP MENU

ENTER

Press POWER button.

2 Press

OPEN/CLOSE button on the main unit

to open the disc tray. The disc tray will open.

Place the disc onto the disc tray with its label facing up and make sure to align the disc to the disc tray guide. Press AOPEN/CLOSE button again to close the disc tray.

NOTE:

• This operation may take a few minutes to complete.

• Some discs may start playing automatically.

DVD-RW (VR)DVD-RW (Video)

DISC MENU

///

STOP C (DVD)

Original

1 1 32

JAN/1 12:00AM

JAN/1 1:00AM JAN/1 2:00AM

JAN/1 3:00AM

JAN/1 4:00AM

DISC MENU button

Playlist

1 1 32

JAN/1 12:00AM

JAN/1 1:00AM JAN/1 2:00AM

JAN/1 3:00AM

JAN/1 4:00AM

NOTE:

• Press the TOP MENU button to exit the menu.

• Disc menu is only available for VR mode recorded disc.

•For DVD-R (Video mode) and DVD-RW (Video mode) discs which are already finalized, a title list will be displayed instead of thumbnails as shown below.

Title Menu

Select a desired title using K/L/s /Bbuttons,

CH9612:24AMJAN/1

then press ENTER button. Playback will start.

OPERATING DVD RECORDER

PLAYING

disc tray guide

4 Press TOP MENU button to display the title

menu. You can change "Original" or "Playlist" of VR

mode using DISC MENU button. Video mode:

Title List

1 1 32

JAN/1 12:00AM

JAN/1 1:00AM JAN/1 2:00AM

JAN/1 3:00AM

JAN/1 4:00AM

Press STOP C (DVD) button to stop playback.

NOTE:

•You can resume play from where you stopped playing the disc. (Resume play) Refer to page 36 for details about resume play.

To eject the disc, press AOPEN/CLOSE button to open the disc tray, then remove the disc before turning off the unit.

OPERATING DVD RECORDER

PLAYING

POWER

PLAY B (DVD) STOP C (DVD)

1 Press POWER button.

2 Press

OPEN/CLOSE button on the main unit

to open the disc tray. The disc tray will open.

3 Place the disc onto the disc tray with its label

facing up and make sure to align the disc to the disc tray guide.

Press PLAY B (DVD) button to start playing.

Playback will start.

• If you are playing a DVD-Video disc, a menu may appear. Refer to page 35 for details about a disc menu.

Press STOP C (DVD) button to stop playing.

NOTE:

• Some discs may start playing automatically.

CDDVD-V

MP3

TOP MENU

ENTER RETURN

STOP C (DVD)

1 In stop mode, press TOP MENU button to bring

up the MP3 menu.

List of MP3 Files

DISC NAME

FOLDER NAME 1 FOLDER NAME 2 FOLDER NAME 3 FOLDER NAME 4 FOLDER NAME 5 FOLDER NAME 6 1 FILE NAME 1 2 FILE NAME 2

To exit the menu, press TOP MENU button again.

NOTE:

• If you press AOPEN/CLOSE button to close the disc tray, the automatic playback will not start, but MP3 menu will appear.

2 Press

K/L

buttons to select a desired folder

(group) or track, then press ENTER button.

When selecting track:

Playback will start.

When selecting the folder:

The files in the folder will appear. Press Kor Lbutton to select the track or folder

you want, then press ENTER button.

• Press

button or RETURN button to go to the

previous hierarchy.

• Press STOP C (DVD) button to return to the first item.

Hints for MP3 files:

•

Folders are known as Groups, files are known as Tracks.

• Folders are accompanied by icon.

• MP3 files are accompanied by icon.

Playback will start from the selected track and go to the next one in turn.

• The system can recognize up to 255 groups (or fold-

ers) and up to 255 tracks.

• The name of the group and track can be displayed in

up to 32 characters. Unrecognizable characters will be replaced with asterisks.

•

If the folder includes no files, "No Files" will be displayed.

• The audio source of MP3 files cannot be recorded as

digital sound by an MD or DAT deck.

• Files whole extension other than ".mp3 (MP3)" will

not be listed in the MP3 menu.

• Some unplayable folders or tracks may be listed in the

MP3 menu due to the recording status. This unit recommends the files recorded under the following circumstances:

• Sampling frequency: 44.1kHz or 48kHz.

• Constant bit rate: 112kbps - 320kbps.

1/2

Playback with Disc Menu

Playback with Title Menu

DVD-V

A DVD disc contains a disc menu that describes the contents or allows you to customize the playback. For example, the menu may offer choices for subtitle languages, special features, or chapter selection.

Some disc menus are automatically displayed when you start playback, others only appear when you press DISC MENU button.

Number

DISC MENU

///

ENTER

Press DISC MENU button.

The DVD main menu will appear.

NOTE:

• Menus vary among discs. Refer to the information accompanying the disc for details.

If the feature is not available, may appear on the TV screen.

DVD-V

Some DVDs have a title menu, which lists the titles available on them. It helps you to start playback at a specific title.

Number

TOP MENU

///

ENTER

Press TOP MENU button.

The title menu will appear.

NOTE:

• The TOP MENU button will not always be active with all DVDs.

• Menus vary among discs. Refer to the information accompanying the disc for details.

If the feature is not available, may appear on the TV screen.

OPERATING DVD RECORDER

PLAYING

2 Select an item using

press ENTER button to confirm. Continue this step to set up all the features you

want or to start playing the disc from the menu.

DISC MENU button:

Displays a DVD disc menu which varies with the disc and may be the same as the 'Title menu.'

K/L

s/B

buttons:

Moves the cursor on the screen.

ENTER button:

Selects the currently highlighted menu option.

Number buttons:

Selects a numbered menu option (only for some discs). ENTER button should be pressed after pressing Number buttons.

K/L

/s /Bbuttons, then

3 Press DISC MENU button to exit the menu.

2 Select a title to play using the

then press ENTER button. Playback will begin at the title you selected.

TOP MENU button:

Displays the 'Title menu' of a DVD disc that varies with the disc.

K/L

s/B

buttons:

Moves the cursor on the screen.

ENTER button:

Selects the current highlighted menu option.

Number buttons:

Selects a numbered menu option (only for some discs). ENTER button should be pressed after pressing Number buttons.

Press TOP MENU button to exit the title menu.

K/L

/s /Bbuttons,

OPERATING DVD RECORDER

PLAYING

Special Playback

Resume

DVD-RDVD-V

DVD-RW (VR)

You can resume play from where you stopped playing the disc last.

NOTE:

•For MP3 files, playback will resume from the beginning of the track at which playback was stopped.

PLAY B (DVD) STOP C (DVD)

DVD-RW (Video)

MP3CD

1 During playback, press STOP C (DVD) button.

The resume message will appear.

DISC Resume ON

2 Press PLAY B (DVD) button.

In a few seconds, playback will resume from the point at which it stopped last. You can resume play at the same point even if you turn off the unit.

To cancel the resume play and start playing the disc from the beginning, press STOP C (DVD) button again while the playback is stopped.

Pause

DVD-RDVD-V

DVD-RW (VR)

PAUSE F

DVD-RW (Video)

MP3CD

PLAY B (DVD)

1 During playback, press PAUSE F button.

Playback will pause and sound will be muted.

Fast Forward / Fast Reverse

DVD-RDVD-V

DVD-RW (VR)

DVD-RW (Video)

MP3CD

PLAY B (DVD) E D

1 During playback, press D or E button.

Every time you press D or E button, approximate speed changes as follows.

Normal

x20

For Audio CDs, approximate speed is set at x8 with sound.

For MP3 files, approximate speed is set at x16. To return to the normal playback, press PLAY B

(DVD) button.

NOTE:

•For DVD discs, the sound will be output during playback in fast forward of x2 only if you set "Fast Forward with Audio" to "ON" for the "Playback" setting in the SETUP menu.

•Forward/reverse speed will be indicated with icons as follows. Forward (Approx. Speed) Reverse (Approx. Speed) x2 : x5 : x20: x20: x40: x40:

speed

playback

x2 x20x5 x40x40

Slow Forward / Slow Reverse

DVD-RDVD-V

PAUSE F

DVD-RW (VR)DVD-RW (Video)

PLAY B (DVD) E D

1 During playback, press PAUSE F button, then

press D or E button. Every time you press D or E button, approxi-

mate speed will be changed as follows.

DISC

Press PLAY B (DVD) button to resume play.

x1/8

To return to the normal playback, press PLAY B (DVD) button.

NOTE:

• The sound will remain mute.

•Forward/reverse speed will be indicated with icons as follows. Forward (Approx. Speed) Reverse (Approx. Speed) x1/16: x1/16: x1/8 : x1/8 : x1/2 : x1/4 :

Pause

x1/16 x1/8x1/16 x1/2x1/4

Step by Step

Zoom

DVD-RDVD-V

DVD-RW (VR)DVD-RW (Video)

CHANNEL K/

PLAY B (DVD)

PAUSE F

1 During playback, press PAUSE F button.

Playback will pause and sound will be muted.

DISC

Press CHANNELKbutton repeatedly.

Every time you press the button, the playback will go forward by one frame (or step) with the sound muted.

Press CHANNELLbutton repeatedly. Every time you press the button, the playback

will go backward by one frame.

3 Press PLAY B (DVD) button to resume play.

DVD-RDVD-V

DISPLAY

ENTER

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

11 1:23:45

2 Select icon using

DVD-Video

s /B

buttons, then press

ENTER button. Zoom option menu will appear.

01:23:45

DVD-Video

x1.2 x1.5 x2.0

Three options (x1.2, x1.5, x2.0) excluding the current zoom rate are displayed.

3 Select a desired zoom factor to zoom using

buttons, then press ENTER button. The zoom area will be displayed.

DVD-RW (VR)DVD-RW (Video)

///

OPERATING DVD RECORDER

PLAYING

s /B

Select a desired zoom position using K/L/s /

buttons, then press ENTER button. The zoom play will start.

NOTE: Zoom

• When selecting a smaller factor than the current one, the zoom area will not be displayed.

To remove the zoom menu, press DISPLAY button again at step [1].

•

•To cancel the zoom function, select x1.0 using s / B but- tons, then press ENTER button.

OPERATING DVD RECORDER

PLAYING

Setting Marker

DVD-RDVD-V

DVD-RW (VR)

This feature allows you to assign a specific point on a disc to be returned to later.

DISPLAY

ENTER

During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

11 1:23:45

2 Select icon using

ENTER button. Marker setup menu will appear. Screen for DVD: Screen for CD:

1101:23:45

1 2 3 4 5 6

Select a desired marker number using s /Bbut-

tons. When it reaches the desired point, press ENTER

button.

s /B

DVD-Video

DVD-RW (Video)

CLEAR

DVD-Video

buttons, then press

1 01:23:45

1 2 3 4 5 6

Audio CD

4 To return to the marker later, select the desired

marker number using ENTER button.

NOTE: Marker

•You can mark up to 6 points.

•To clear a marker, select the marker number to be cleared, then press CLEAR button.

•

All markers will be erased by the following operation:

Opening the disc tray Turning off the power Recording to a recordable disc Changing the mode between Original and Playlist

(VR mode)

Editing the disc

s /B

buttons, then press

DVD-RDVD-V

Title/Chapter Search

DISPLAY

Number

ENTER

Using CHANNEL KLbuttons

1 During playback, press CHANNEL

skip the current title or chapter and move to the next.

The title or chapter will move forward by one title at a time.

To go back to the previous title or chapter, press

CHANNELLbutton. The title or chapter will

move backward by one title at a time. Only press CHANNELLbutton once to go back

to the top of the current title.

Using DISPLAY button

DVD-RW (VR)DVD-RW (Video)

CHANNEL K/

///

button to

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

11 1:23:45

Select icon using s /Bbuttons, then press

ENTER button. 'T' for title will be highlighted.

Title:

Enter a desired title number to search using K/ buttons or Number buttons, then press ENTER button. Title search will start.

Chapter:

To move to 'C' for chapter, press Enter a desired chapter number to search using

K/L

buttons or Number buttons, then press

ENTER button.

Chapter search will start.

DVD-Video

B button.

Track Search

Time Search

MP3CD

DISPLAY

CHANNEL K/

Number

///

ENTER

Using CHANNEL KLbuttons

1 During playback, press CHANNEL

button to

skip the current track and move to the next. The track will move forward one at a time. To go back to the previous track, press CHAN-

NELLbutton. The track will move backward one

track at a time.

Using DISPLAY button

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

1 01:23:45

2 Select icon using

Audio CD

s /B

buttons, then press

ENTER button. 'T' for track will be highlighted.

3 Enter a desired track number to search using

K/L

buttons or Number buttons, then press

ENTER button.

Tr ack search will start.

DVD-RDVD-V

DVD-RW (VR)

DISPLAY

Number

ENTER

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears. Screen for DVD:

11 1:23:45

DVD-Video

Screen for CD:

1 01:23:45

2 Select icon using

Audio CD

s /B

buttons, then press

ENTER button. 'T' for title or track will be highlighted. To move to the (clock) icon, press

3 Enter a desired time to search using

tons or Number buttons, then press ENTER but- ton.

Time search will start.

NOTE:

• Time search function is available only in the same track or title.

DVD-RW (Video)

///

button.

K/L

but-

OPERATING DVD RECORDER

PLAYING

OPERATING DVD RECORDER

PLAYING

Repeat/Random/Program Play

Repeat Play

DVD-RDVD-V

DVD-RW (VR)

DISPLAY

ENTER

During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

11 1:23:45

2 Select icon using

ENTER button. Repeat menu will appear.

NOTE:

•To cancel the repeat playback, select OFF.

s /B

1101:23:45

OFF Title Chapter A-B

DVD-RW (Video)

///

DVD-Video

buttons, then press

DVD-Video

Track: CD, MP3 only

The current track will be played repeatedly.

Group: MP3 only

The current group will be played repeatedly.

MP3CD

NOTE:

•You cannot select "Group" during the random playback of MP3 files.

Random Play

MP3CD

You can play tracks on a disc randomly instead of playing it in the recorded sequence.

SETUP

///

ENTER

STOP C (DVD)

1 In the stop mode, press SETUP button to display

SETUP/CD menu. SETUP/CD menu will appear.

Select "CD" using s /Bbuttons, then press

ENTER button. CD Playback Mode menu will appear.

3 Select a desired option to repeat using

tons, then press ENTER button. Title: DVD only

The current title will be played repeatedly.

Chapter: DVD only

The current chapter will be played repeatedly.

All: CD, MP3 and DVD-RW (VR mode only)

The current disc will be played repeatedly.

A-B:

The A-B point will be played repeatedly. When pressing ENTER button while A-B is high-

lighted, the starting point (A) will be decided. Press ENTER button again to select the ending

point (B).

NOTE:

• The A-B Repeat playback can only be set within the current title (for DVDs) or current track (for Audio CDs).

K/L

but-

Select "Random Play" using K/Lbuttons, then

press ENTER button. Random playback will start.

NOTE:

•To cancel random playback, press STOP C (DVD) button during random playback.

Program Play

Selecting AUDIO / VIDEO Menu

You can program tracks on a disc to be played in your desired order.

NOTE:

•You can make program up to 50 tracks.

Number

SETUP

ENTER

PLAY B (DVD)

In the stop mode, press SETUP button to display

SETUP/CD menu. SETUP/CD menu will appear.

2 Select "CD" using

s /B

buttons, then press

ENTER button. CD Playback Mode menu will appear.

3 Select "Program Play" using

press ENTER button. Program Play list will appear.

CD Playback Mode > Program Play

- - - - - - - - - - - - - - - - - - - -

Total 00:00:00

K/L

buttons, then

CLEAR

///

STOP C (DVD)

You can select an audio or video format, as you prefer depending on the contents of the disc you are playing.

Switching Audio Soundtrack

DVD-V

When playing a DVD-Video disc recorded with two or more soundtracks (mostly in different languages), you can switch between them anytime during playback.

NOTE:

• Some discs will only allow you to change the soundtrack from the disc's menu. Press TOP MENU button or DISC MENU button to display the disc's menu.

• On DVD-RW discs recorded in VR mode that may have both a main and a sub audio channel, you can switch to main (L), sub audio (R) or a mix of both (L/R).

DISPLAY

ENTER

During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

11 1:23:45

DVD-Video

DVD-RW (VR)

///

OPERATING DVD RECORDER

PLAYING

Select a desired track using K/L buttons, then

press ENTER button or

button.

A cursor will move to the next.

CD Playback Mode > Program Play

- - - - - - - - - - - - - -- -- -

- -

- - - - - - - - - - - - - -- -- -

- -

- - - - - - - - - - - - - -- -- -

- -

- - - - - - - - - - - - - -- -- -

- -

Total 00:04:30

NOTE:

•You may also select a desired track using Number buttons.

•To erase tracks you selected, press CLEAR button.

Press PLAY B (DVD) button to start program playback. Program playback will start according to your program.

NOTE:

•To cancel program playback, press STOP C (DVD) button twice during program playback.

2 Select icon using

s /B

ENTER button. Audio menu will appear. <DVD-Video>

11 1:23:45

1 Dolby Digital 5.1ch English 2 Dolby Digital 2ch Japanese

<DVD-RW VR mode>

11 1:23:45

1 Dolby Digital Dual L/R 2 Dolby Digital 2ch ----

Continue on next page.

buttons, then press

DVD-Video

DVD-RW VR Original

OPERATING DVD RECORDER

PLAYING

3 Select a desired audio soundtrack using

K/L

buttons, then press ENTER button. <DVD-Video> Audio soundtrack will switch. <DVD-RW VR mode> You can switch to main (L), sub audio (R) or a

mix of both (L/R). In this case, follow the step [4].

11 1:23:45

1 Dolby Digital Dual 2 Dolby Digital 2ch

4 Select a desired audio channel using

DVD-RW VR Original

L/R L R

K/L

tons, then press ENTER button. Audio channel will switch.

NOTE:

• This unit CANNOT record in both stereo and SAP (Secondary Audio Program) at the same time.

but-

MP3CD

When playing Audio CDs or MP3 files you can switch between stereo, the left channel only or the right channel only.

DISPLAY

///

ENTER

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

1 1:23:45

Select icon using s /Bbuttons, then press

ENTER button. Audio menu will appear.

Audio CD

Select a desired audio channel using K/Lbut-

tons, then press ENTER button. Audio channel will change.

1 1:23:45

L/R L R

Audio CD

Switching Subtitles

Switching Camera Angles

DVD-V

DVD-RW (VR)

Many DVD Video discs have subtitles in one or more languages. The case usually tells you which subtitle languages are available. You can switch subtitle languages anytime during playback.

NOTE: Top Menu / Disc Menu

• Some discs allow you to change the subtitle only from the disc's menu. Press TOP MENU button or DISC MENU button to display the disc's menu.

DISPLAY

DISC MENU

///

ENTER

During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

11 1:23:45

DVD-Video

DVD-V

DISPLAY

ENTER

Some DVD Video discs feature scenes shot from two or more angles, check the case of the DVD for details: it should be marked with an angle icon if it contains multi-angle scenes.

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

1101:23:45

DISC

DVD-Video

OPERATING DVD RECORDER

2 Select icon using

s /B

buttons, then press

ENTER button. Subtitle menu will appear.

11 1:23:45

OFF 1English 2Japanese

Select a desired subtitle language using K/

DVD-Video

buttons, then press ENTER button. Subtitle will be displayed in the selected lan-

guage.

When selecting "OFF", subtitle will disappear.

Angle icon appears when a switching camera

PLAYING

angle is available.

Select icon using s /Bbuttons, then press

ENTER button. Angle will switch each time you press ENTER

button.

OPERATING DVD RECORDER

PLAYING

Reducing Block Noise

DVD-RDVD-V

This function reduces noise in the playback picture.

DISPLAY

ENTER

DVD-RW (VR)DVD-RW (Video)

///

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

OFF Type 1 Type 2

DVD-Video

11 1:23:45

Select icon using s /Bbuttons, then press

ENTER button. NR menu will appear.

11 1:23:45

Virtual Surround Setting

DVD-RDVD-V

Switching to virtual surround setting allows you to enjoy DVD disc with a surround effect.

DISPLAY

ENTER

DVD-RW (VR)DVD-RW (Video)

///

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

11 1:23:45

Select icon using s /Bbuttons, then press

ENTER button. Virtual surround menu will appear.

1101:23:45

DVD-Video

ON OFF

Select a desired option using K/Lbuttons, then

press ENTER button. Your setting will be activated. When playing back discs recorded in long time

mode such as SLP or SEP mode, select "Type 1" or "Type 2". ("Type 2" is more effective.) When playing back prerecorded DVD discs with little or no noise, select "OFF".

3 Select "ON" using

K/L

buttons, then press

ENTER button. Virtual surround setting will be activated.

NOTE:

•To turn off virtual surround, select "OFF" in Virtual Surround menu screen.

UIDE TO DISPLAYS ON SCREEN MENU

This unit uses the following types of display for most operations. SETUP/DISC/CD menu, Title List, and DISPLAY, which allows you to change the playing status of disc during play.

SETUP/DISC/CD menu

Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by pressing s /B buttons.Then, press ENTER button to display each menu. This provides entries to all main functions of the unit.

"SETUP" is available only in the Stop mode.

Setup Menu

Setup

1 2 3

4 5 6

Playback Setting

"DISC" can be only selected when a DVD-R/RW disc is inserted into the unit. When a prerecorded DVD Video disc, a new DVD-R disc or the finalized DVD-R disc is inserted into the unit, you cannot select "DISC".

Disc Setting

Disc

Edit Format Finalize

Disc Protect OFF ON

1 2 3

"CD" is available only when an Audio CD disc or a CD-R/RW disc with MP3 files is inserted into the unit.

CD Playback Mode

Random Play Program Play

1 2

OPERATING DVD RECORDER

1. Playback:

To set up the unit to play discs to your preference.

2. Recording:

To set up the unit to record to discs or VHS tape.

3. Display:

To set up the OSD screen.

4. Select Video:

To choose a line input to record to DVD discs or VHS tapes from other video components.

5. Clock:

To set up the clock.

6. Channel:

To preset the TV channels.

You will need to finalize the DVD discs before they can be played in other DVD players.

1. Edit:

Tu r ns on a title list, (when a disc with VR mode is inserted, 'Original' or 'PlayList' is available), which shows the recorded titles on the disc.

2. Format:

Allows you to erase all of the recorded content on the disc. The disc will be completely blank.

3. Finalize:

Allows you to finalize a disc recorded titles.

4. Disc Protect (VR mode only) :

Allows you to protect a disc from accidental editing or recording.

1. Random Play:

To set the random CD tracks playback.

2. Program Play (Audio CD only):

To activate the programmed playback of CD tracks.

PLAYING / GUIDE TO DISPLAYS ON SCREEN MENU

DVD-RW VR DVD-RW Video

You want to

Record TV programs Reuse by deleting unwanted contents Edit recorded contents Edit/Record from connected equipment Copy discs for distribution Play on other DVD equipment

DVD-RW VR DVD-RW Video

Features

Recording

Rewritable? Yes Yes Can create chapters at fixed intervals (auto.) Yes Yes Can create chapters wherever you like (manual) Yes No Can record 16:9 size pictures Yes Yes Can record Copy-Once programs Yes No

Editing

Can perform basic edit functions Yes Yes Can perform advanced edit functions (Playlist edit) Yes No

Ye s

DVD-RW (VR mode) can only be played on DVD equipment that is VR compatible.

NOTE:

For details of the above functions and implied restrictions, see the explanations inside the manual.

DVD-R

: Most suitable. : Can be used. : Some functions are limited. : Cannot be used.

OPERATING DVD RECORDER

ASY DVD RECORDING

The following will help you to understand easily how to record to DVD discs.

NOTE:

• Make sure that you have completed connections and batteries should be inserted in the remote control.

Step 1: Choose a disc

type

There are several types of DVD disc recordable to choose from. Choose an applicable type by "DVD disc types" on this page.

This unit can record on the following type of discs only.

(or)

* This unit cannot record on the follow-

ing discs.

•DVD-R General Ver 2.0 / 8x

•DVD-RW Ver 1.2 / 2-4x CPRM compatible

For example, when you want to record repeatedly on the same disc or when you want to edit the disc after recording, select the rewritable DVD-RW type disc. When you want to save recordings without any alteration, a nonrewritable DVD-R can be your choice.

Step 2:

Insert a blank disc

Tu rn on the unit

Open the disc tray

Close the disc tray

Remote Control

NOTE:

• This operation may take a few minutes to complete.

Step 3: Select the

Recording speed

To select the recording speed, press REC SPEED button once, then change the recording speed using buttons.

K/L

SP 1:01 Rem.

DVD disc types

Important

Format the disc

Insert the disc in the unit, then format the disc from SETUP menu. Video format (Video mode) or Video recording format (VR mode) will be available depending on the disc type inserted. This is necessary to prepare the disc for recording. Details are on pages 48-49. * When you format, the

entire contents on that disc will be erased.

Finalize the disc

After recording, you will need to finalize the DVD discs recorded in this unit before they can be played in other DVD players. See page 54.

Step 4: Select the

desired channel

Step 5: Press DVD

RECORD button

Step 6: Stop the

Recording

58%

CH 1

DISC

Writing to Disc

DISC

NOTE:

• This operation may take a few minutes to complete.

Playing the recorded contents

You can select the title you want to play from a displayed menu and immediately start to play. Recorded contents are very accessible on a disc, the procedure is really simple as you choose a title on a chapter from the menu screen.

What are titles and chapters?

The contents of DVD disc are generally divided into titles. Titles may be further subdivided into chapters.

Start Rec. Stop/Start Stop Rec.

Title 1 Title 2

Chapter 1 Chapter 1Chapter 2 Chapter 3 Chapter 2

Editing the recorded disc

You will find editing discs very easy. This unit offers convenient edit functions, which are possible only with DVD-R/RW discs.

You can edit the following from a Title list.

• Naming titles

• Setting pictures for thumbnails (VR mode)

• Setting/clearing chapter markers

• Deleting title part or scene (VR mode) Title Delete : This deletes an entire scene permanently from the disc. Scene Delete : This allows a user to edit within a specific scene (ex. commercials).

Original and Playlist (VR mode)

You can edit the recordings in Playlist without changing the original recordings. Any Playlist does not take up much disc space.

What "Original" or "Playlist" is for?

Throughout this manual, you will find Original and Playlist to refer to the actual content and the edited version.

• Original content refers to what's actually recorded on the disc.

• Playlist content refers to the edited version of the disc; how the Original content is to be played.

OPERATING DVD RECORDER

EASY DVD RECORDING

Finalize the Disc

• This will allow a disc that is recorded on our unit to be played back on a different DVD player without finalization it will not be playable on another player.

• After finalizing a disc if the recording was in video mode, you can not edit any information that is on that disc.

• If you have recorded in VR mode on DVD-RW disc then editing is still permitted after finalizing. See page 54.

OPERATING DVD RECORDER

ECORDING

About DVD Recording

This unit can record to DVD-R and DVD-RW discs.When recording, you will need to select a recording format between Video mode and VR mode depending on the disc format.The disc format for DVD-R is always "Video format," so a recording format will be "Video mode". On the other hand, when recording to DVD-RW, a recording format will be "Video mode" or "VR mode" because a disc format is available between "Video Recording format" and "Video format" for DVD-RW.

Logo Attributes

12cm, single-sided, single layer disc Approx. max. recording time (SEP mode):

DVD-RW

DVD-R

* This unit cannot record on the following discs.

•DVD-R General ver 2.0/8x

•DVD-RW ver 1.2/2-4xCPRM compatible.

600 minutes (4.7GB)

12cm, single-sided, single layer disc Approx. max. recording time (SEP mode): 600 minutes (4.7GB)

Important

Video mode / VR (Video Recording) mode

Video Format Select the Video Recording Mode to record discs that can

played back on most standard DVD players.Video Recording Mode creates discs compatible with most DVD players, but there is no capability to edit the recordings. DVD-R discs can only be formatted in the Video mode, DVD-RW discs can be formatted in the Video mode or the VR mode.

VR Format Select the VR Recording Mode to record discs that can

be edited, but can be played back only on DVD recorders and players that support the VR mode with DVD-RW discs. DVD-R discs cannot be formatted in the VR mode, only DVD-RW discs can be formatted in the VR mode.

Disc type Disc format

Video mode

DVD-RW (Video)

VR mode

DVD-RW

DVD-RW (VR)

Video mode

DVD-R

Functions

Playing, limited recording, limited editing

Playing, recording, Original/Playlist editing

Playing, limited recording, limited editing

Recording Speed

You can select a recording speed among 6 options. The recording time depends on the recording speed you select as follows:

Recording speed

XP (1H)

SP (2H)

LP (4H)

EP (6H)

SLP (8H)

SEP (10H)

* This table is designed for a new single-sided 12cm

disc as the standard. The recording time shown above may differ from actual recording time.

* The audio and video quality is poorer as the

recording time becomes longer.

* Discs recorded in SLP or SEP on this recorder

may not be playedback on other DVD recorders or DVD players.

Recording time *

60 min

120 min

240 min

360 min

480 min

600 min

Video/Sound Quality

(Highest)

(Lowest)

DVD players with can play DVD-RW recorded in VR mode.

NOTE:

• This unit cannot record CD-R or CD-RW discs. DVD-R/RW and CD-R/RW discs recorded on a personal computer or

• a DVD or CD recorder may not be played in this unit if the disc is damaged or dirty or if there is dirt of condensation on the units lens.

•Even if you record a disc using a personal computer in a compatible format, you may not play it in this unit due to the application software used to create the disc. (Check with the software distributor for more detailed information.)

• Discs recorded in Video mode on this unit cannot be recorded additionally using other DVD recorders.

Restrictions

You cannot record copy-protected video using this unit. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, the unit will pause or stop automatically and an error message will be displayed on-screen. "Copy-once only" video can be recorded only using a DVD-RW disc in VR mode with CPRM (see below).When recording a TV broadcast or through an external input, copy control information can be displayed on screen.

What is "CPRM"? CPRM is a copy protection system with scramble

system regarding the recording of "copy once" broadcast programs. CPRM stands for Content Protection for Recordable Media. This unit is CPRM compatible, which means that you can record copy-once broadcast programs, but you cannot make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs formatted in VR mode, and CPRM recordings can only be played on players that are specifically compatible with CPRM.

Copy Control

Some satellite broadcasts include copy-protected contents. Refer to the following condition on copy control.

Disc type / format

ver.1.1

DVD-RW

ver.1.1 CPRM compatible

ver.1.1

Video

DVD-RW

ver.1.1 CPRM compatible

DVD-R

ver.2.0

Recordable Not Recordable

Copy-free Copy-once

Copyprohibited

Formatting

Format Setting

DVD-RW (VR)DVD-RW (Video)

When inserting a blank disc, the unit starts to initialize the blank disc. After that, you can record to the disc in the recording format selected in SETUP menu.You can set a specified time for chapter marks.

NOTE:

• The recording format setting is available only for DVD-RW discs. You cannot change the recording format on a DVD-R disc. DVD-R discs will always be in Video mode.

•You cannot mix two formats on one DVD-RW disc. When you load a disc once recorded before, the recording format cannot be changed even if you change it in SETUP menu.

• When inserting a blank DVD+R or DVD+RW disc, the error message ("Disc Error") will appear. This unit is not compatible with a DVD+R/RW disc.

• PLAYLIST will be created automatically when recording on DVD-RW in VR mode.

SETUP

///

ENTER

1 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

Select "Recording" using K/L/s /Bbuttons, then

press ENTER button. Recording menu will appear.

OPERATING DVD RECORDER

RECORDING

4 Select "DVD-RW Recording Format" using

buttons, then press ENTER button. Option window will appear.

Setup > Recording

DVD-RW Recording Format Auto Chapter Timer Programming

Video mode DVD Player Compatibility mode. VR mode Editing possibility mode.

Video mode has been selected as the default.

Continue on next page.

DVD

Video mode

VR mode

10 minutes

K/L

OPERATING DVD RECORDER

RECORDING

5 Select "Video mode" or "VR mode" using

buttons, then press ENTER button. The recording mode will be set.

Select "Auto Chapter" using K/Lbuttons, then

press ENTER button. Option window will appear.

Setup > Recording

DVD-RW Recording Format Auto Chapter Timer Programming

"10 minutes" has been selected as the default.

Select a desired time option using K/Lbuttons,

then press ENTER button. Chapter marks will be put as you specified.

• The time for chapter marks is not accurate in Video mode.

Press SETUP button to exit SETUP menu.

NOTE: 2 formats on same disc

You cannot mix both recording formats on a single DVD disc.

NOTE: Finalize

You must "Finalize" all recorded discs before they can be played on other DVD players. Without finalization, Video mode discs cannot be played back on other DVD players, and VR mode discs cannot be played back on other VR compatible players. See page 54.

VR mode

OFF 5 minutes

10 minutes

10 minutes 15 minutes

VCR DVD

30 minutes 60 minutes

DVD

K/L

Reformatting

DVD-RW (VR)DVD-RW (Video)

If you are using a DVD-RW disc, by default it will be Video mode.

You can change this to VR mode from SETUP menu.

Caution: Erasing - Reformatting

• Reformatting will erase the contents of the disc. Once erased, the material cannot be retrieved.

SETUP

///

ENTER

1 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

2 Select "DISC" using

ENTER button. DISC menu will appear.

Select "Format" using K/Lbuttons, then press

ENTER button. Option window will appear. * VR mode only

s /B

buttons, then press

Disc

Edit Format Finalize Disc Protect OFF ON

Yes No

Select "Yes" using s /Bbuttons, then press

ENTER button. Option window will appear. * VR mode only

Disc

Edit Format Finalize Disc Protect OFF ON

Yes No

Are you sure?

Yes No

5 Select "Yes" using

ENTER button. Formatting will start.

NOTE:

• Select "No" to cancel formatting.

s /B

buttons, then press

Basic Recording

Recording TV Programs

DVD-R

Follow the steps below to record TV programs.

DVD-RW (VR)DVD-RW (Video)

Formatting

58%

6 Formatting is complete.

100% will be indicated.

Formatting

NOTE:

• This operation may take a few minutes to complete.

100%

Number

CHANNEL K/

REC SPEED

DVD RECORD

STOP C (DVD)

PAUSE F

Tu rn on the unit and load a recordable disc.

NOTE:

• This operation may take a few minutes to complete.

Press REC SPEED button, then change the

recording speed using K/Lbuttons.

SP 1:01 Rem.

Refer to "Recording speed" on page 48.

3 Make sure that the recording format is set to the

desired mode. Refer to "Formatting" on pages 49-50.

When a DVD-RW disc is loaded:

Choose Video mode or VR mode from SETUP menu. "Video mode" has been selected as the default. Refer to "Format Setting" on pages 49-

50.

When a DVD-R disc is loaded:

DVD-R discs will always be in Video mode.

NOTES:

•If the clock has not been set, the space for a date

and time of title names in the original or playlist will be blank.

•

You cannot mix two formats on one DVD-RW disc. When you load a disc once recorded before, the recording format cannot be changed even if you change it in SETUP menu.

OPERATING DVD RECORDER

RECORDING

Continue on next page.

OPERATING DVD RECORDER

RECORDING

4 Select a desired channel to record using CHAN-

NELK/Lbuttons or Number buttons.

CH 1

5 Press DVD RECORD button to start recording.

NOTE:

• Recording starts immediately and continues until the disc is full or you stop recording.

DISC

I mark will be displayed for 5 seconds.

DISC

To pause the recording, press PAUSE F button. Press DVD RECORD button to restart the recording.

NOTE:

•You cannot change the recording speed during the REC pause mode.

•You can change a channel during the REC pause mode.

6 Press STOP C (DVD) button to stop recording.

NOTE:

• This operation may take a few minutes to complete.

Checking the recording picture quality

DVD-R

You can confirm the recording speed you have selected before recording to a DVD disc.

REC SPEED

DVD-RW (VR)DVD-RW (Video)

REC MONITOR

1 While the unit is in STOP or REC with a record-

able DVD disc inserted, press REC MONITOR button.

The TV program will be shown on the screen

with the recording speed you have selected. Please confirm this is the speed you wish to record.

NOTE:

• The recording picture can be confirmed with the Rec monitor function. (See "Recording Speed" on page 48.)

XP 0:30 Rem

CH 18

Rec Monitor

To change the recording speed, press REC

SPEED button, then use K/Lbuttons. The recording speed will change as you press

the button as shown.

XP SP LP

SEP

EPSLP

DVD mode

NOTE:

•You cannot change the recording speed during recording.

4 Press REC MONITOR button again to exit.

One-Touch Timer Recording

DVD-R

DVD-RW (VR)DVD-RW (Video)

This is a simple way to set the recording time in blocks of 30 minutes. Check that the disc you are recording onto has enough space for the time you set.

Remote control

Number

REC SPEED

CHANNEL K/

STOP C (DVD)

Main Unit

C STOP

(DVD)

I RECORD (DVD)

1 Tu rn on the unit and load a recordable disc.

NOTE:

• This operation may take a few minutes to complete.

2 Press REC SPEED button, then change the

recording speed using K/Lbuttons. Refer to "Recording speed" on page 48.

3 Make sure that the recording format is set to the

desired mode. Refer to " Format Setting " on pages 49-50.

When a DVD-RW rewritable disc is loaded:

Choose Video mode or VR mode from SETUP menu.

"Video mode" has been selected as the default. Refer to " Format Setting" on pages 49-50.

When a DVD-R disc is loaded:

DVD-R discs will always be in Video mode.

0:30

DISC

0:30

OFF (Normal Recording)

1:00

8:00 7:30

When the unit reaches the specified time, it will turn off automatically.

NOTE: Automatic Turn Off

• The unit will turn off automatically under the following conditions:

1) No space remained on the disc.

2) When a power failure occurs.

• If One-Touch Timer Recording finishes in DVD during playback or in REC mode in VCR, the DVD will be in STOP mode and the VCR keeps the current mode.

To cancel the one-touch timer recording within the specified time, press STOP C (DVD) button.

OPERATING DVD RECORDER

NOTE:

• This operation may take a few minutes to complete.

Important

You must "Finalize" all recorded discs before they can be played on other DVD players. Without finalization, Video mode discs cannot be played back on other DVD players and VR mode discs cannot be played back on other VR com-

RECORDING

patible players. See page 54.

4 Select a desired channel to record using CHAN-

NELK/Lbuttons or Number buttons.

5 Press I RECORD (DVD) button on the main

unit repeatedly until a desired recording time (30 minutes to 8 hours) appears on the TV screen.

Recording will start.

OPERATING DVD RECORDER

RECORDING

Finalizing Discs

DVD-R

Finalizing*

DVD player

This Unit

*You cannot finalize discs in other DVD recorders.

Finalizing may take several minutes up to an hour. (A disc recorded in Video mode can take up to 15 minutes. A disc recorded in VR mode can take up to 60 minutes.)

A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization.

After finalizing:

• Once DVD-R/RW (Video mode) is finalized, you cannot record additionally or edit.

• Even if DVD-RW (VR mode) is finalized, you can record additionally to or edit.

• When DVD-R/RW (Video mode) is finalized, title menu will be created automatically.

To play in other DVD players, finalize discs recorded on this unit with the following condition.

Disc type Mode

DVD-R

ver.2.0

DVD-RW

ver.1.1 ver.1.1 CPRM compatible

DVD-RW (VR)DVD-RW (Video)

Playable

Not Playable

Video mode

Video mode VR mode

Yo u cannot cancel finalizing the DVD-R disc once it starts.

SETUP

///

ENTER

STOP C (DVD)

Press SETUP button to display SETUP/DISC menu. SETUP/DISC menu will appear.

2 Select "DISC" using

s /B

buttons, then press

ENTER button. DISC menu will appear.

Select "Finalize" using K/Lbuttons, then press

ENTER button. Option window will appear.

Disc

Edit Format Finalize

Disc Protect OFF ON

Yes No

* VR mode only

Select "Yes" using s /Bbuttons, then press

ENTER button. Finalizing will start.

Finalizing

58%

NOTE: Finalizing

• This operation may take a few minutes to complete. Finalizing discs in Video mode automatically create title menus.

•

• Once you have finalized a disc recorded in Video mode, you cannot edit or record any contents on that disc. Discs recorded in VR mode can still be recorded and edited on this unit even after finalized.

•To cancel finalizing, press STOP C (DVD) button. Select "Yes" using s/ B buttons, then press ENTER button.

• When you insert a DVD-RW disc finalized with this unit, "Undo Finalize" will appear instead of "Finalize".

Disc

Edit Format

To release the finalizing for the disc, select "Undo Finalize" at step [3].

•If appear when pressing STOP C (DVD) button, you cannot cancel finalizing because the finalizing has been in certain progress. When selecting "No", press ENTER or RETURN button, finalizing will be continued.

Undo Finalize

Protecting Discs

DVD-RW (VR)

TO CANCEL THE DISC PROTECT :

• When you insert a disc protected with this unit, “Disc Protect ON ➔ OFF” will appear instead of “OFF ➔ ON”.

To prevent accidental recording, editing or erasing the titles, you can protect them.

SETUP

///

ENTER

Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

2 Select "DISC" using

s /B

buttons, then press

ENTER button. DISC menu will appear.

3 Select "Disc Protect OFF ➔ ON" using

K/L

but-

tons, then press ENTER button. Option window will appear.

Disc

Edit Format Finalize Disc Protect OFF ON

Yes No

Disc

Edit Format Finalize Disc Protect ON OFF

Yes No

To release the protect for the disc, select “Disc Protect ON ➔ OFF” at step [3], then select “Yes”.

OPERATING DVD RECORDER

RECORDING

4 Select "Yes" using

s /B

buttons, then press

ENTER button. A disc will be protected.

Writing to Disc

58%

NOTE:

• This operation may take a few minutes to complete.

• The Disc Protect setting is available only when a disc with VR mode is inserted.

•You can only select Disc Protect Menu when a protected disc is inserted.

OPERATING DVD RECORDER

RECORDING

Connecting to External Video Products

Connections

Connect the external video products properly to the unit by using input jacks on the front of this unit.

Use S-Video or video cable and an audio cable for this connection.

S- VIDEO

OUTPUT

VIDEO

AUDIO

Other devices (ex. VCR camcorder etc.)

Video

cable

S-Video cable

S-VIDEO Recording onto DVD only

To record onto a VHS tape, use the VIDEO input.

Audio cable

1 Press SETUP button to display SETUP/DISC

menu.

Select "SETUP" using s /Bbuttons, then press

ENTER button.

3 Select "Select Video" using

K/L

/s /Bbuttons,

then press ENTER button.

Setup > Select Video

Line

DVD

AUX

Press ENTER button. Option window will appear.

Select the input jack type to connect using K/

buttons, then press ENTER button. If you want to use S-VIDEO INPUT, select "S". If you want to use VIDEO INPUT (Composite),

select "AUX".

Setup > Select Video

Line

Video In

AUX S

DVD

5 Press SETUP button to exit.

Recording from External Video Products

DVD-R

DVD-RW (VR)DVD-RW (Video)

Before recording from an external video product, see the instructions for the connection in the previous section, “Connections”.

DVD RECORD

REC SPEED

VCR RECORD

VCR

CHANNEL K/

STOP C (DVD)

STOP C (VCR)

1 Tu rn the unit on.

When you want to record onto a DVD:

Press AOPEN/CLOSE button on the main unit to open the disc tray, then place the disc to record properly, then press AOPEN/CLOSE button again to close the disc tray.

NOTE:

• This operation may take a few minutes to complete.

When you want to record to a tape:

Insert the tape with a safety tab into the cassette compartment.

3 Select the external input mode (“AUX” or “S”)

using CHANNELK/Lbuttons.

4 Press REC SPEED button (For VCR, press REC

SPEED button twice), then change the recording

speed using K/Lbuttons until your desired speed is displayed. Refer to "Recording Speed" on page 48 for DVD or page 28 for VCR.

XP SP LP

SEP

DVD mode

Press DVD RECORD button or VCR RECORD

EPSLP

SP SLP

VCR mode

button to start recording.

Press PLAY button on the external video product.

7 For disc:

Press STOP C (DVD) button to stop recording.

NOTE:

• This operation may take a few minutes to complete.

For tape:

Press STOP C (VCR) button to stop recording.

UBBING

DVD-R

You can copy a DVD disc to a videotape or copy a videotape to a DVD disc.This function will be possible only if the DVD disc or the tape is not copy protected. Before starting this function, prepare for the recording on the DVD-R/RW disc or the videotape. Refer to pages 48-55, 28-30.

NOTE: Load Recording Media

• Insert a DVD disc or videotape with the available recording space.

REC SPEED

VCR DVD VCR DVD

VCR to DVD DVD to VCR

The DVD recording speed and format should be selected first. Refer to "Recording" on page 48 and "Formatting" on pages 49-50.

DVD-RW (VR)DVD-RW (Video)

VCR

STOP C (DVD)

STOP C (VCR)

The tape's record tab should be intact. The videotape should have enough available space

to record the DVD disc.

OPERATING DVD RECORDER

1 Press REC SPEED button first, and select a

recording speed using K/Lbuttons.

2 Press VCR DVD button on the remote control

or on the main unit. VCR to DVD duplication will start.

3 Press STOP C (DVD) or STOP C (VCR) button

on the remote control or on the main unit to stop the recording.

NOTE:

•After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is not a malfunction. Be advised to playback the tape until the picture is stabilized, then set the starting point you wish to start recording, and start VCR to DVD duplication.

Press REC SPEED button twice and select a

recording speed using K/Lbuttons.

Press VCR DVD button on the remote control

or on the main unit.

DVD to VCR duplication will start.

Press STOP C (DVD) or STOP C (VCR) button

on the remote control or on the main unit to stop the recording.

NOTE: DVD Dubbing

• Duplicating operation from DVD to VCR is only available when DVD stops or during DVD playing, and when VCR stops.

•You cannot make a dub from a DVD disc protected by copyright, such as a prerecorded DVD.

RECORDING / DUBBING

OPERATING DVD RECORDER

IMER RECORDING

Timer Recording

DVD-R

DVD-RW (VR)DVD-RW (Video)

You can program up to 7 programs 1 year in advance. Daily or weekly program recordings are also available.

NOTE: Time must be set

• Be sure to set the clock before making a timer programming.

•Insert a recordable disc or a tape with a safety tab.

POWER

SETUP

ENTER

Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

Select "SETUP" using s /Bbuttons, then press

ENTER button. SETUP menu will appear.

3 Select "Recording" using

K/L

/s /Bbuttons, then

press ENTER button. Recording menu will appear.

4 Select "Timer Programming" using

then press ENTER button. Timer Programming list will appear.

NOTE: Timer Program Menu

• Timer Programming menu can also be selected by pressing

TIMER PROG. button. In this case, continue with step [5].

• If you have not set the clock yet: A clock setting window will appear after step [4]. Before making a timer programming, press ENTER button then finish setting the clock, referring to the step [5] in "Manual Clock Setting" on page 19.

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

Date Start End CH

- - -

Select the blank program using K/Lbuttons,

then press ENTER button.

DVD

Speed

VCR

TIMER PROG.

///

K/L

buttons,

6 Enter the date using K/L buttons, then press B

button.

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

Date Start End CH

JAN / 01

- - : - -

- - -

e.g. January 1st

NOTE:

• When pressing L button at the current date, timer recording mode will change as follows:

JAN/01

Daily

MON-SAT

MON-FRI

SAT

FRI

SUN

DEC/31

Enter the time to start and to end using K/Lbut-

tons, then press

button.

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

Date Start End CH

JAN/01

10 :00PMCH8 DVD

- - -

NOTE:

• Press s or B buttons to move the cursor to the left and the right in the timer programming menu.

Select the channel number to record using K/

buttons, then press

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

Date Start End CH

JAN/01

10:00

- - -

• To record from external input, select “AUX”.

9 Select a recording media using

then press

• To record on to a tape, select VCR.

• To record on to a disc, select DVD.

button.

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

Date Start End CH

JAN/01

10:00

- - -

- - : - -

CH8 DVD

- - : - -

button.

10:30

CH8 DVD

10:30

CH8 DVD

DVD

Speed

VCR

DVD

Speed

VCR

DVD

Speed

VCR

K/L

buttons,

DVD

Speed

VCR

Select a recording speed using K/L buttons.

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

Date Start End CH

JAN/01

10:00

- - -

10:30

CH8 DVD

DVD

Speed

VCR

Refer to "Recording speed" on page 48 for DVD or page 28 for VCR.

• If you set Recording speed to “Auto” at step [10], this unit will automatically adjust the recording speed so that the program will fit into one disc. (You can select “Auto” in the first program only.)

Press ENTER button when all information

required is entered. Your program setting will be entered.

• To set another program, repeat steps [5] to [11].

• To exit, press SETUP button.

Press POWER button to turn off.

Important

When you set the timer program in either DVD mode or VCR mode, RECORD indicator (DVD) will illuminate on the front of the TV. See item No.19 on page 7.

NOTE:

• If power is not turned off and you continue watching TV, “TIMER REC STANDBY” starts flashing on the TV screen 2 minutes before the programmed start time. In this case, press POWER button to turn off to activate the timer recording.

•You may turn on the unit once the timer recording has started.

Checking, canceling, or correcting the timer programming information

POWER

TIMER PROG. CLEAR

///

ENTER

1 Press POWER button.

Press TIMER PROG. button. Timer Programming

list will appear.

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

Date Start End CH

JAN/01

10:00

- - -

10:30

CH8 DVD

DVD

Speed

VCR

3 Check the information.

4 To clear the timer programming, select your

desired program using K/Lbuttons, then press CLEAR button.

To correct the timer programming, select your desired program using K/Lbuttons, then press ENTER button.

Next, correct the timer programming using

K/L

s /B

buttons.

Finally, press ENTER button again.

5 Press TIMER PROG. button to exit.

OPERATING DVD RECORDER

TIMER RECORDING

6 Press POWER button to return to the timer

standby mode.

NOTE:

• Press TIMER PROG. button to check the timer programming

in process. When the timer recording is in process, that program will be highlighted in red. In this case, you cannot select any other program.

To stop the timer recording in process

Press POWER button first to turn on the unit. Then, on the front panel of the unit, press STOP C (DVD) button to stop the recording or C STOP/A EJECT to stop the tape recording. STOP C button on the remote control does not work for timer recording.

OPERATING DVD RECORDER

TIMER RECORDING

Suggestions for Timer Recording

• If there is a power failure or this unit has been unplugged for more than 3 seconds, the clock setting and all timer settings will be lost.

• If a disc is not on the tray, timer recording cannot be performed. Please insert a recordable disc.

• If a tape with a record tab is not in the cassette compartment, timer recording cannot be performed. Please insert a recordable tape. See "Accidental erasure prevention" on page 28.

• The main unit automatically ejects a tape without a record tab inserted in the compartment when you turn off the power and move to timer standby mode.

• When all the timer recording is completed, the RECORD indicator disappears.To play the recorded disc (or the tape), press POWER button first and then press PLAY B (DVD) or PLAY B (VCR). To eject the recorded disc (or the tape), press AOPEN/CLOSE (or C STOP/A EJECT) button.

• The timer recording is not performed in DVD and VCR at the same time. If you set two programs with the same channel and time both in DVD and VCR, the program that has priority will be recorded.

• During timer recording or timer standby (RECORD indicator is on the front display), any operations on the unit will not be available. To make these operations available, cancel the timer recording or timer standby first (RECORD indicator disappears).

• To cancel the timer standby mode, press POWER button.

• When the Start and the End time are the same, the length of the recording will be set for 24 hours.When the disc reaches at the end during the recording, the unit turns itself off.

• When the programmed Start and End time are earlier than the current time, the recording will be set on the same date in the next year.

• If your programmed Start time for DVD recording is within 2 minutes from the current time, the power will turn on for recording standby right after you turn the power off. For a videotape recording, the power will turn on shortly before the Start time.

• If a videotape ends during timer recording, the unit will stop, eject the videotape and turn itself off.

• When two or more programmings are overlapped, "Overlap" will be displayed.

The priority of overlapped settings

This unit records the programs according to priority if the timer programs are overlapped. The timer program set first is given priority. A timer recording of lower priority will be canceled, begin from the middle or stopped at the end. Check the overlapped timer programs and change the priority if necessary.

A programming set previously has priority

When the starting time is the same:

A program set previously (PROG.A) has priority.

ex.1

PROG. A

PROG. B

Actual recording

PROG. A PROG. B

When some programming have been made at the end time of the programming currently being recorded:

A program set previously (PROG. B) has priority.

ex. 2

PROG. A

PROG. B

PROG. C

Actual recording

PROG. A PROG. B

When the recording time is partially overlapped:

PROG. A will start after PROG. B is complete to be recorded.

PROG. A

PROG. B

Actual recording

PROG. B PROG. A

Note for DVD timer recording

• When the recording time of two programs are overlapped or the End time of a program and the Start time of another is the same, the first 20-90 seconds of the subsequent program will be cut off.

Example: When the end time of the programming currently being recorded and the starting time of the one to be recorded sequentially are same:

PROG. A

PROG. B

Actual recording

When the recording time is entirely overlapped:

PROG. A will not be recorded.

PROG. A

PROG. B

Actual recording

PROG. BPROG. A

The first 20-90 seconds will be cut off.

PROG. B

DITING DISCS

About Disc Editing

Title List

Title list allows you to check the titles recorded on the disc easily. You can choose a title to edit from this screen and easily edit the titles as you prefer.

Disc > Edit > Original

1 1 32

JAN/1 1:00AM

JAN/1

Disc > Edit > Original

JAN/1 1:00AM CH12 XP

7 4

1. Titles recorded on the disc can be selected to

edit by pressing ENTER button with the cursor on the title.

2. Protect icon, which appears when the title has been protected.

3. The arrow icon, which means the title list includes a next or a previous page. Press following direction of the icon.

4. The menus for editing titles as you prefer. The available menu depends on the disc type and the format type.

5. The details of the title, which can be changed to the title name you will edit.

6. Time status bar of the title.

7. The selected title thumbnails from the title list.

8. Playback status of the current disc.

JAN/1 2:00AM JAN/1 3:00AM

JAN/1

4:00AM

5:00AM

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF

6 5

JAN/1 6:00AM

0:01:25

B or s button by

Editing in Video Mode

You can edit the following items for discs in Video mode. Be sure that once you edit titles, they will not remain as recorded originally.

• Deleting titles (Refer to page 62)

• Putting names on titles (Refer to page 63)

•

Setting or clearing chapter markers (Refer to page 63)

NOTE: Finalized Discs

• Once a disc is finalized, editing the disc or recording to the disc will not be available. (Except DVD-RW discs in VR mode.)

•A playlist is not available with the DVD-R discs and DVD-RW discs in Video mode.

Editing in VR Mode

For discs in VR mode, you can edit from "Original" menu or "Playlist" menu, which is created from the original.

Editing original titles

The following operations can be used to edit the original titles.

-Deleting titles (Refer to page 64)

-Deleting parts of titles (Refer to page 65)

-Putting names on titles (Refer to page 65)

-Setting or clearing chapter markers (Refer to page 66)

-Setting pictures for thumbnails (Refer to page 66)

-Setting titles to protect (Refer to page 67)

-Releasing titles from protecting (Refer to page 67)

Editing playlists

You can create a playlist from original titles, so that you can edit as you prefer without losing original titles. The following operations you can edit with a playlist.

-Deleting titles (Refer to page 68)

-Deleting parts of titles (Refer to page 69)

-Putting names on titles (Refer to page 69)

-Setting or clearing chapter markers (Refer to page 70)

-Setting pictures for thumbnails (Refer to page 70)

-Adding titles to a playlist (Refer to page 71)

-Deleting a playlist (Refer to page 71)

NOTE: Original Titles

•Original titles once edited will not remain as recorded originally. When you want to leave the original as it is, edit the playlist as you prefer. (Refer to pages 68-71.)

OPERATING DVD RECORDER

EDITING DISCS

OPERATING DVD RECORDER

EDITING DISCS

Editing Discs in Video Mode

Deleting Titles

DVD-R

Caution:

You can delete titles that you do not need anymore. The titles once deleted cannot be recovered to the disc. When the last title in the title list in Video mode is deleted, the disc space to record will be increased. For DVD-R disc, the disc space to record will not be changed.

SETUP

ENTER

1 Press SETUP button. Select "DISC" using

buttons, then press ENTER button. DISC menu will appear.

Disc

Edit Format Finalize

DVD-RW (Video)

///

s /B

4 Select "Title Delete" using

K/L

buttons, then

press ENTER button. Option window will appear.

Disc > Edit

JAN/ 1 1:00AM CH12 XP

Select "Yes" using s /Bbuttons, then press

Title Delete Edit Title Name Chapter Mark

Yes No

0:01:25

ENTER button. Title will be deleted.

NOTE:

• This operation may take a few minutes to complete.

6 After writing to disc is completed, press SETUP

button to exit DISC menu.

Select "Edit" using K/Lbuttons, then press

ENTER button. Title list will appear.

Disc > Edit

1 1 32

JAN/1 1:00AM

JAN/1 2:00AM JAN/1 3:00AM

JAN/1 4:00AM

JAN/1 5:00AM

3 Select a desired title using

K/L

/s /Bbuttons,

then press ENTER button. Edit menu will appear.

Disc > Edit

JAN/ 1 1:00AM CH12 XP

Title Delete Edit Title Name Chapter Mark

0:01:25

• You cannot select “Chapter Mark” when a DVD-R disc is inserted into this unit.

Naming Titles

Setting Chapter Markers

DVD-R

DVD-RW (Video)

You can name the titles and change the names from this menu.

The title names will be displayed on a Title List.

SETUP

///

ENTER

Follow the steps [1] to [3] on page 62 to display the Edit menu.

Select "Edit Title Name" using K/Lbuttons, then

press ENTER button. A window for entering a title name will appear.

Disc > Edit > Edit Title Name

JAN/ 1 1:00AM CH12 XP

A B C

a b c 1 2 3

@ ! ?

0:01:25

2 To enter a title name, follow the steps shown in

"Guide to edit title name" below.

Disc > Edit > Edit Title Name

JAN/ 1 1:00AM CH12 XP

When you finish entering a title name, press ENTER button.

[

Guide to edit title name

Select

Press

Select "Yes" using s /Bbuttons, then press

ABC

<space>

*1 *1

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

abc

123

! ” # $ % & , ( ) * + , - . / : ;

< = > ? @ [ ] ^

abc

def

ghi

jkl

mno

pqrs

tuv

wxyz

_ { | }

ENTER button. The name you entered will be activated for the title.

NOTE:

• This operation may take a few minutes to complete.

A B C

a b c 1 2 3 @ ! ?

0:01:25

]

@ ! ?

[

Step1]: Select a desired character set using

K/L buttons, then press ENTER button.

[

]

Step2

: Press Number buttons following by the

list.

Press button, character set will be changed to the " @

Press to buttons, character set

will be changed to the previous input mode

automatically.

・

To delete letters, press CLEAR button repeatedly.

・To go on to the next entering area for

　letters, press button.

・You can enter up to 30 letters.

character set

area for entering title names

A B C

a b c

1 2 3

@ ! ?

" mode automatically.

DVD-RW (Video)

You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search. You can set chapter markers at a specified time you selected for titles with more than 5 minutes.

NOTE:

•

You cannot select a time for putting markers beyond a length of a title.

•

When recording at the recording speed other than XP or SEP, the length of chapters may be slightly longer or shorter than the one specified at the step [2].

•

A chapter marker may be delayed according to the recording content.

SETUP

///

ENTER

Follow the steps [1] to [3] on page 62 to display the Edit menu.

Select "Chapter Mark" using K/Lbuttons, then

press ENTER button. Option window will appear.

Disc > Edit

JAN/ 1 1:00AM CH12 XP

Title Delete

OFF

Edit Title Name

5 minutes

Chapter Mark

10 minutes 15 minutes 30 minutes 60 minutes

0:01:25

2 Select a desired time using K/L buttons, then

press ENTER button. Option window will appear.

Disc > Edit

JAN/ 1 1:00AM CH12 XP

Select "Yes" using s /Bbuttons, then press

Title Delete

OFF

Edit Title Name

5 minutes

Chapter Mark

10 minutes 15 minutes 30 minutes 60 minutes

Yes No

0:01:25

ENTER button. Chapter marks will be put as you specified.

NOTE:

• This operation may take a few minutes to complete.

4 After writing to disc is completed, press SETUP

button to exit DISC menu.

OPERATING DVD RECORDER

EDITING DISCS

4 After writing to disc is completed, press SETUP

button to exit DISC menu.

OPERATING DVD RECORDER

EDITING DISCS

Editing DVD-RW Discs in VR Mode (Original)

Deleting Titles

DVD-RW (VR)

When a title is deleted from an original list in VR mode, the disc space to record will be increased.

Caution:

Be advised that the titles once deleted cannot be brought back to the disc.

SETUP

///

ENTER

Press SETUP button. Select "DISC" using s /

buttons, then press ENTER button. DISC menu will appear.

Disc

Edit Format Finalize Disc Protect OFF ON

4 Select a desired title using

K/L

/s /Bbuttons,

then press ENTER button. Original menu will appear.

Disc > Edit > Original

JAN/ 1 1:00AM CH12 XP

Select "Title Delete" using K/Lbuttons, then

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF

0:01:25

press ENTER button. Option window will appear.

Disc > Edit > Original

JAN/ 1 1:00AM CH12 XP

Title Delete Scene Delete Edit Title Name Chapter Mark Index Picture Protect OFF

Yes No

0:01:25

Caution:

Once erased, the material cannot be retrieved.

Select "Yes" using s /Bbuttons, then press

ENTER button. Title will be deleted.

NOTE:

• This operation may take a few minutes to complete.

7 After writing to disc is completed, press SETUP

button to exit DISC menu.

2 Select "Edit" using

K/L

buttons, then press

ENTER button. Original/PlayList menu will appear.

Disc > Edit

Original

Select "Original" using s /Bbuttons, then press

ENTER button. Original list will appear.

Disc > Edit > Original

1 1 32

JAN/1 1:00AM

JAN/1 2:00AM JAN/1 3:00AM

JAN/1 4:00AM

JAN/1 5:00AM

Deleting Parts of Titles

Naming Titles

DVD-RW (VR)

You can delete part of a title so that the disc space to record will increase.

Caution:

Be advised that the parts once deleted cannot be recovered.

SETUP

///

ENTER

Follow the steps [1] to [4] on page 64 to display the Original menu.

Title Delete Scene Delete

Start

Edit Title Name

End

Chapter Mark

Preview

Index Picture

Delete

Protect OFF

Title Delete Scene Delete

Start

Edit Title Name

End

Chapter Mark

Preview

Index Picture

Delete

Protect OFF

Yes No

K/L

buttons, then

0:00:55

0:01:25

1 Select "Scene Delete" using

press ENTER button. Option window will appear.

Disc > Edit > Original

JAN/ 1 1:00AM CH12 XP

Press ENTER button to decide a start point, then

press ENTER button to decide an end point. A cursor will move to "Preview." You can check a preview.

Before editing

Edited

Select "Delete" using K/L buttons, then press

ENTER button. Option window will appear.

Select "Yes" using s /Bbuttons, then press

ENTER button. Part of a title will be deleted.

NOTE:

• This operation may take a few minutes to complete.

•You cannot select "Scene Delete" when the number of chapter markers in the original or playlist is more than 900.

After writing to disc is completed, press SETUP

button to exit DISC menu.

Start point End point

Disc > Edit > Original

JAN/ 1 1:00AM CH12 XP

DVD-RW (VR)

You can name the titles and change the names from this menu.

The title names will be displayed on a Title List.

SETUP

///

ENTER

Follow the steps [1] to [4] on page 64 to display the Original menu.

Select "Edit Title Name" using K/Lbuttons, then

press ENTER button. A window for entering a title name will appear.

Disc > Edit > Original > Edit Title Name

JAN/ 1 1:00AM CH12 XP

A B C

a b c 1 2 3 @ ! ?

0:01:25

2 To enter a title name, follow the steps shown in

"Guide to edit title name" below.

Disc > Edit > Original > Edit Title Name

JAN/ 1 1:00AM CH12 XP

A B C

a b c 1 2 3 @ ! ?

character set

area for enter-

0:01:25

ing title names

When you finish entering a title name, press ENTER button.

[

Guide to edit title name

Select

Press

Select "Yes" using s /Bbuttons, then press

ABC

<space>

*1 *1

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

abc

abc

def

ghi

jkl

mno

pqrs

tuv

wxyz

]

@ ! ?

123

[

Step1]: Select a desired character set using

K/L buttons, then

! ” # $ %

press ENTER button.

& , ( ) * + , - . / : ; < = > ? @ [ ] ^

[

]

: Press Number buttons following by the

Step2

_ { | }

list.

Press button, character set will be changed to the " @

Press to buttons, character set

will be changed to the previous input mode

automatically.

・

To delete letters, press CLEAR button repeatedly.

・To go on to the next entering area for

　letters, press button.

・You can enter up to 30 letters.

" mode automatically.

A B C a b c 1 2 3 @ ! ?

ENTER button. The name you entered will be activated for the title.

NOTE:

• This operation may take a few minutes to complete.

4 After writing to disc is completed, press SETUP

button to exit DISC menu.

OPERATING DVD RECORDER

EDITING DISCS

OPERATING DVD RECORDER

EDITING DISCS

Setting Chapter Markers

DVD-RW (VR)

You can put chapter markers in each title. Once a chapter is marked, you can use it for chapter search.

You can put a chapter marker anywhere you want.

NOTE:

• When the number of chapter markers in the original list comes to 999 in total, you cannot add any more chapter markers.

SETUP

///

ENTER

Follow the steps [1] to [4] on page 64 to display the Original menu.

Select "Chapter Mark" using K/Lbuttons, then

press ENTER button. Option window will appear.

Disc > Edit > Original

Chapter 1/1

JAN/ 1 1:00AM CH12 XP

2 Select "Add" or "Delete" using

press ENTER button. Option window will appear. <Add>: <Delete>:

Disc > Edit > Original

Chapter 1/1

JAN/ 1 1:00AM CH12 XP

Title Delete Scene Delete Edit Title Name

Add

Chapter Mark

Delete

Index Picture Protect OFF

Yes No

0:01:25

Title Delete

Scene Delete Edit Title Name

Add

Chapter Mark

Delete

Index Picture

Protect OFF

0:01:25

K/L

buttons, then

Disc > Edit > Original

Chapter 2/2

JAN/ 1 1:00AM CH12 XP

Title Delete Scene Delete Edit Title Name

Add

Chapter Mark

Delete

Index Picture Protect OFF

Yes No

0:01:25

Setting Pictures for Thumbnails

DVD-RW (VR)

You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default.

SETUP

///

ENTER

PLAY B (DVD)

PAUSE F

Follow the steps [1] to [4] on page 64 to display the Original menu.

Select "Index Picture Set" using K/Lbuttons.

H, G, E, D

Use

, PLAYB(DVD) and PAUSE F buttons to decide the picture you want to select as a thumbnail, then press ENTER but- ton.

Option window will appear.

Disc > Edit > Original

JAN/ 1 1:00AM CH12 XP

2 Select "Yes" using

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set

Protect OFF

Yes No

0:01:25

s /B

buttons, then press

ENTER button. A picture for thumbnail will be set.

NOTE:

• This operation may take a few minutes to complete.

• If a selected picture for a thumbnail is deleted by deleting a part of a title, a default picture will be selected.

• You cannot delete the first chapter marker of each title.

3 Select "Yes" using

s /B

buttons, then press

ENTER button. A chapter marker will be added or deleted.

NOTE:

• These operations may take a few minutes to complete.

After writing to disc is completed, press SETUP

button to exit DISC menu.

After writing to disc is completed, press SETUP

button to exit DISC menu.

Protecting Titles

Releasing Title Protect

DVD-RW (VR)

To prevent accidental editing or erasing the titles, you can protect them from the original menu.

SETUP

///

ENTER

Follow the steps [1] to [4] on page 64 to display the Original menu.

0:01:25

K/L

buttons,

1 Select "Protect OFF ➔ ON" using

then press ENTER button. Option window will appear.

Disc > Edit > Original

JAN/ 1 1:00AM CH12 XP

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF

Yes No

DVD-RW (VR)

You can release the title protection once you protected.

SETUP

///

ENTER

Follow the steps [1] to [3] on page 64 to display the Original list.

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON

K/L

/s /Bbuttons,

OFF

0:01:25

1 Select a desired title using

then press ENTER button. Original menu will appear.

Disc > Edit > Original

JAN/ 1 2:00AM CH12 XP

OPERATING DVD RECORDER

Select "Yes" using s /Bbuttons, then press

ENTER button.

Disc > Edit > Original

JAN/ 1 1:00AM CH12 XP

Writing to Disc

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect OFF

Yes No

NOTE:

• This operation may take a few minutes to complete.

After writing to disc is completed, press SETUP

button to exit DISC menu.

To protect a whole disc (DVD-RW VR mode Only):

Select "Disc Protect" from Disc menu, then select "Yes". Refer to page 55.

NOTE: Title Protection

• Once you protect the titles, other editing operations are not available until you release the title protection.

"Protect ON ➔ OFF" is selected.

2 Press ENTER button.

Option window will appear.

Disc > Edit > Original

JAN/ 1 2:00AM CH12 XP

Select "Yes" using s /Bbuttons, then press

ENTER button.

NOTE:

• This operation may take a few minutes to complete.

After writing to disc is completed, press SETUP

button to exit DISC menu.

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set Protect ON

Yes No

OFF

0:01:25

EDITING DISCS

OPERATING DVD RECORDER

EDITING DISCS

Editing DVD-RW Discs in VR Mode (Playlist)

Deleting Titles

DVD-RW (VR)

In VR mode, even when a title is deleted from a Playlist, the original title will remain in an Original list. The disc space to record will not increase.

SETUP

///

ENTER

Press SETUP button. Select "DISC" using s /

buttons, then press ENTER button. DISC menu will appear.

Disc

Edit Format Finalize Disc Protect OFF ON

4 Select a desired title using

K/L

/s /Bbuttons,

then press ENTER button. Playlist menu will appear.

Disc > Edit > Playlist

JAN/ 1 1:00AM CH12 XP

Select "Title Delete" using K/Lbuttons, then

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set

0:01:25

press ENTER button. Option window will appear.

Disc > Edit > Playlist

JAN/ 1 1:00AM CH12 XP

Select "Yes" using s /Bbuttons, then press

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set

Yes No

0:01:25

ENTER button. Title will be deleted.

NOTE:

• This operation may take a few minutes to complete.

7 After writing to disc is completed, press SETUP

button to exit DISC menu.

2 Select "Edit" using

K/L

buttons, then press

ENTER button. Original/PlayList menu will appear.

Disc > Edit

Original

Select "PlayList" using s /Bbuttons, then press

ENTER button. Playlist will appear.

Disc > Edit > Playlist

1 1 32

JAN/1 1:00AM

JAN/1 2:00AM JAN/1 3:00AM

Add New

Title

Delete

JAN/1 4:00AM

JAN/1 5:00AM

Playlist

Deleting Parts of Titles

Naming Titles

DVD-RW (VR)

Important

You can delete a specific part of a title. Even when a title is deleted from the Playlist, the original title will remain. The disc space to record will not be increased.

SETUP

///

ENTER

Follow the steps [1] to [4] on page 68 to display the Playlist menu.

1 Select "Scene Delete" using

K/L

buttons, then

press ENTER button. Option window will appear.

Disc > Edit > Playlist

JAN/ 1 1:00AM CH12 XP

Title Delete Scene Delete

Start

Edit Title Name

End

Chapter Mark

Preview

Index Picture

Delete

0:00:55

2 Press ENTER button to decide a start point, then

press ENTER button to decide an end point. A cursor will move to "Preview". You can check a preview.

Before editing

Edited

Select "Delete" using K/Lbuttons, then press

Start point End point

ENTER button. Option window will appear.

Disc > Edit > Playlist

JAN/ 1 1:00AM CH12 XP

4 Select "Yes" using

Title Delete

Scene Delete

Start

Edit Title Name

End

Chapter Mark

Preview

Index Picture

Delete

Yes No

0:01:25

s /B

buttons, then press

ENTER button. Part of a title will be deleted.

NOTE:

• This operation may take a few minutes to complete.

•You cannot select "Scene Delete" when the number of chapter markers in the original or playlist is more than 900.

5 After writing to disc is completed, press SETUP

button to exit DISC menu.

DVD-RW (VR)

ou can name the titles and change the names from this menu.

The title names will be displayed on a Title List.

SETUP

///

ENTER

Follow the steps [1] to [4] on page 68 to display the Playlist menu.

1 Select "Edit Title Name" using

K/L

buttons, then

press ENTER button. A window for entering a title name will appear.

Disc > Edit > Playlist > Edit Title Name

JAN/ 1 1:00AM CH12 XP

A B C

a b c 1 2 3 @ ! ?

0:01:25

2 To enter a title name, follow the steps shown in

"Guide to edit title name" below.

Disc > Edit > Playlist > Edit Title Name

JAN/ 1 1:00AM CH12 XP

When you finish entering a title name, press ENTER button.

[

Guide to edit title name

Select

Press

3 Select "Yes" using

ABC

<space>

*1 *1

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

abc

123

! ” # $ % & , ( ) * + , - . / : ;

< = > ? @ [ ] ^

abc

def

ghi

jkl

mno

pqrs

tuv

wxyz

_ { | }

s /B

ENTER button. The name you entered will be activated for the title.

NOTE:

• This operation may take a few minutes to complete.

After writing to disc is completed, press SETUP

button to exit DISC menu.

A B C

a b c 1 2 3 @ ! ?

0:01:25

]

@ ! ?

[

Step1]: Select a desired character set using

K/L buttons, then press ENTER button.

[

]

: Press Number buttons following by the

Step2

list.

Press button, character set will be changed to the " @

Press to buttons, character set

will be changed to the previous input mode

automatically.

・

To delete letters, press CLEAR button repeatedly.

・To go on to the next entering area for

　letters, press button.

・You can enter up to 30 letters.

buttons, then press

character set

area for entering title names

A B C a b c 1 2 3 @ ! ?

" mode automatically.

OPERATING DVD RECORDER

EDITING DISCS

OPERATING DVD RECORDER

EDITING DISCS

Setting Chapter Markers

DVD-RW (VR)

You can put chapter markers in each title. Once a chapter is marked, you can use it for the chapter search.

You can put a chapter marker anywhere you want.

NOTE:

• When the number of chapter markers in the original list comes to 999 in total, you cannot add any more chapter markers.

SETUP

///

ENTER

Follow the steps [1] to [4] on page 68 to display the Playlist menu.

Select "Chapter Mark" using K/Lbuttons, then

press ENTER button. Option window will appear.

Disc > Edit > Playlist

Chapter 1/1

JAN/ 1 1:00AM CH12 XP

2 Select "Add" or "Delete" using

press ENTER button. Option window will appear. <Add>: <Delete>:

Disc > Edit > Playlist

Chapter 1/1

JAN/ 1 1:00AM CH12 XP

• You cannot delete the first chapter of each title.

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set

Add Delete

Yes No

0:01:25

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set

Add Delete

0:01:25

K/L

buttons, then

Disc > Edit > Playlist

JAN/ 1 1:00AM CH12 XP

Chapter 2/2

Title Delete Scene Delete Edit Title Name

Add

Chapter Mark

Delete

Index Picture Set

Yes No

0:01:25

Setting Pictures for Thumbnails

DVD-RW (VR)

You can set a picture to each title for a thumbnail. It helps you to remember the contents of the title you are playing. The beginning picture has been selected as the default.

SETUP

///

ENTER

PLAY B (DVD)

K/L

buttons.

PAUSE F

Follow the steps [1] to [4] on page 68 to display the Playlist menu.

1 Select "Index Picture Set" using

H, G, E, D

Use

PAUSEFbuttons to decide the picture you want

to select as a thumbnail. Then, press ENTER button.

Option window will appear and the video in the thumbnail will begin to play.

Select "Yes" using s /Bbuttons, then press

ENTER button. A picture for thumbnail will be set.

NOTE:

• This operation may take a few minutes to complete.

• If a selected picture for a thumbnail is deleted by deleting a part of a title, a default picture will be selected.

After writing to disc is completed, press SETUP

button to exit DISC menu.

, PLAYB(DVD), and

Disc > Edit > Playlist

JAN/ 1 1:00AM CH12 XP

Title Delete

Scene Delete Edit Title Name Chapter Mark Index Picture Set

Yes No

0:01:25

3 Select "Yes" using

s /B

buttons, then press

ENTER button. A chapter marker will be added or deleted.

NOTE:

• These operations may take a few minutes to complete.

After writing to disc is completed, press SETUP

button to exit DISC menu.

Adding Titles to Playlist

Deleting Playlist

DVD-RW (VR)

You can add or delete a title in the playlist as you prefer. You can add titles to a Playlist up to 99.

SETUP

///

ENTER

Follow the steps [1] to [3] on page 68 to display the Playlist.

1 Select "Add New Title" using

then press ENTER button. Original list will appear.

Disc > Edit > Playlist > Add New Title

1 1 32

JAN/12 5:00PM JAN/12 8:00PMJAN/10 10:30AM

Select a desired title using K/L/s /Bbuttons,

then press ENTER button. The selected title will be added in Playlist.

Disc > Edit > Playlist > Add New Title

K/L

/s /Bbuttons,

DVD-RW (VR)

A Playlist can be deleted if no longer needed.

SETUP

///

ENTER

Follow the steps [1] to [3] on page 68 to display the Playlist.

Select "Delete Playlist" using K/L/s /Bbuttons,

then press ENTER button. Option window will appear.

NOTE: Playlist

• Deleting a Playlist will not increase the available recording time on disc.

Disc > Edit > Playlist

1 1 32

JAN/1 2:00AM JAN/1 3:00AM

JAN/1 1:00AM

JAN/1 4:00AM

Select "Yes" using s /Bbuttons, then press

ENTER button. Playlist will be erased. The display will return to

TV screen.

JAN/1 5:00AM

Add New

Title

Delete

Playlist

Yes No

OPERATING DVD RECORDER

EDITING DISCS

Writing to Disc

Disc > Edit > Playlist

1 1 32

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 4:00AM

JAN/1 5:00AM

58%

JAN/1 3:00AM

JAN/12 8:00PM

3 After writing to disc is completed, press SETUP

button to exit DISC menu.

• To delete a title from Playlist, refer to "Deleting Titles" on page 68.

• To delete a Playlist, refer to "Deleting Playlist" in the next section.

OPERATING DVD RECORDER

ARENTAL LOCK LEVEL SETTING

Some DVD-Video discs feature a Parental Lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material.

NOTE: Parental Lock Availability

•Parental lock function may not be available to some discs.

• With some DVDs, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates as you have set.

SETUP

///

ENTER

STOP C (DVD)

Press STOP (DVD) button if you are playing a disc.

1 Press SETUP button to display SETUP/DISC

menu. SETUP/DISC menu will appear.

2 Select "SETUP" using

ENTER button. SETUP menu will appear.

Select "Playback" using K/L/s /Bbuttons, then

press ENTER button. Option window will appear.

Select "Parental Lock" using K/Lbuttons, then

press ENTER button.

Parental Lock (Default :All)

Set the Parental Lock level.

Setup > Playback

TV Mode Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio

4:3 Letter Box All English Original OFF

ON OFF

s /B

buttons, then press

DVD

[A] A password has not been set yet

Setup > Playback

TV Mode Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio

DVD

4:3 Letter Box

Change Password?

All

Yes No

All 7

English 6 Original

5 OFF

4 3 2

ON 1 OFF

• If you select "No", proceed to step [5].

Ye s

Setup > Playback

TV Mode Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio

DVD

• Select "Yes" using s /Bbut-

4:3 Letter Box

Password

All

- - - -

All 7

English 6 Original

5 OFF

4 3 2

ON 1 OFF

tons, then enter a new password using Number buttons. Then, press ENTER button. Your setting will be activated.

[B] A password has been set already

Setup > Playback

TV Mode Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio

Setup > Playback

TV Mode Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio

DVD

4:3 Letter Box

All

Password

All

* * * *

7 English

6 Original 5

OFF

4 3 2

ON 1 OFF

DVD

4:3 Letter Box

Change Password?

All

Yes No

All 7

English 6 Original

5 OFF

4 3 2

ON 1 OFF

• Enter the current password using Number buttons.

• If you select "No", proceed to step [5].

Ye s

Change the password

Setup > Playback

TV Mode Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio

DVD

• Select "Yes" using s /Bbut-

4:3 Letter Box

Password

All

- - - -

All 7

English 6 Original

5 OFF

4 3 2

ON 1 OFF

tons, then enter a new password using Number buttons, then press ENTER button. Your setting will be activated.

NOTE: Forget Password

• Record the password in case you forget it.

• Press CLEAR button to erase numbers entered incorrectly.

• When you forget the password or you want to clear all settings in Parental lock, enter 4,7,3,7 using Number buttons in option window. Password will be cleared and parental levels will be set to All.

Setup > Playback

TV Mode Parental Lock Disc Menu Language Audio Language Subtitle Language Digital Out Dynamic Range Control Fast Forward with Audio

DVD

• Change the parental level

4:3 Letter Box

All 8

All

English

Original

OFF

4 3 2

OFF

using K/Lbuttons, then press ENTER button.

Option window will appear. Proceed to step [A] or [B].

5 Press SETUP button to exit SETUP menu.

CHANGING SETUP MENU

ETUP MENU LIST

The following table shows the contents you can set, including the default settings. Refer to the following table for useful operation.

SETUP menu ContentsItems (highlight is the default)

Language setting

Page 32

Disc Menu Language

English French Spanish

Set the language for disc menu.

2.Audio setting

Pages 12-13

OSD Display setting

3. Pages 14-15,

24-27

Audio Language

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

OSD Background Tr ansparency

OSD Background Color

OSD Language

Screen Saver

Original English French

OFF English French

PCM Auto

48kHz 96kHz

Dolby Digital PCM

Stream

ON OFF

100%

35% 25%

1 2 3

English Français Español

OFF 5 minutes 10minutes

Set the language for audio.

Set the language for subtitle.

Set whether the sound recorded in 96kHz will be down sampled in 48kHz.

Set the type of sound signal which outputs from the digital audio output jack.

Compressing the range of sound volume.

Outputting the sound during play in fast forward.

Set the background transparency of OSD screen.

Set the OSD screen color. 1 (Green), 2 (Blue), 3 (Red)

Select the language for OSD.

Set the time to work the screen saver on the screen.

CHANGING SETUP MENU

Caption

V-CHIP Setup

4.Parental setting

Page 72

NOTE:

• If you change the setting in SETUP menu, the information remains even when the power is turned off.

Parental Lock

(Change password)

OFF CAPTION1

TV RATING MPAA RATING CHANGE CODE

ALL level 8 to 1

Enter the current four-digit password

Set the closed caption mode.

Prevent their children from watching inappropriate material on TV.

Set the parental level of your DVD discs.

Set and change the password.

PARENTAL LOCK LEVEL SETTING / SETUP MENU LIST

OTHERS

Symptom Remedy

Power

The power does not turn on. • Check that the AC power cord is connected securely.

Picture

There is no picture.

• Re-connect the connecting cord securely.

• The connecting cords are damaged.

• The Setup Display appears. Press SETUP or RETURN

button to turn off the display.

•

Check antenna/cable wire and the fittings at each end of the wire.

Picture noise appears.

• The disc is dirty or flawed.

• Head cleaning for VCR may be necessary. Refer to "AUTO HEAD CLEANING".

•

Adjust tracking control for better picture by pressing CHANNEL K/L buttons while you are playing a video tape.

•

Check antenna/cable wire and the fittings at each end of the wire.

TV program pictures are distorted.

• Adjust antenna.

• Adjust the picture.

•

Place this unit and any bunched antenna cables farther apart.

•

Check antenna/cable wire and the fittings at each end of the wire.

TV program reception does not fill the screen.

•

Tr y to set the channels with "Auto Preset" in SETUP menu (page 16).

• Select a channel of any TV program using the CHANNEL

buttons.

•

Check antenna/cable wire and the fittings at each end of the wire.

Sound

No sound is output. • Adjust volume control.

• The disc is dirty or flawed.

• Re-connect all connections securely.

• The connecting cord is damaged.

• Check the connections to the amplifier input.

• The input source setting on the amplifier is incorrect.

• The unit is in Pause mode or in Slow-motion play mode.

• The unit is in fast forward or fast reverse mode.

•

If the audio signal does not come through the AUDIO OUT COAXIAL jack, check the Audio Setup settings (pages 12-13).

TV channels cannot be changed.

• Connect the antenna cable correctly (page 10).

•Perform auto channel preset on page 16.

•

Check antenna/cable wire and the fittings at each end of the wire.

Distorted color appears on screen

• Magnetism from nearby appliances and unshielded speakers and geomagnetism might affect the color of the TV picture. Move the TV/VCR/DVD away from the appliances or unshielded speakers, the TV/VCR/DVD can repair itself automatically. If you want to repair immediately, unplug the power cord, then plug it in again after 30 minutes later or so.

Sound is noisy.

• The disc is dirty or flawed.

•

When playing a DTS-CD, noise may come from the speakers. This unit is not compatible with DTS-CD.

No DTS sound is output.

• This unit is not compatible with DTS sound.

ROUBLESHOOTING

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple corrections may solve the problem and restore the proper operation.

Symptom Remedy

Playback

Recording/Timer recording/Editing

The disc does not play. • No disc is inserted.

The disc does not start playback from the beginning.

The unit starts playing from the disc automatically.

Some functions such as Stop, Search, or Slow-motion Play cannot be performed.

The language for the sound track cannot be changed.

The subtitle language cannot be changed or turned off.

The angles cannot be changed. •

The channel cannot be changed from the channel you are recording.

Recording does not start immediately after you press DVD RECORD or VCR RECORD button.

Nothing was recorded even though you set the timer setting correctly.

Recording does not stop immediately after you press STOP C button.

Timer recording is not completed or did not start from the beginning.

Timer recording is not available. • Make sure that the recordable tape or disc should be

•A blank disc is inserted.

• No cassette tape is inserted.

• The disc is upside down. Insert the disc with the labeled side facing up.

• The disc is not correctly inserted.

•

The unit cannot play certain discs (such as a CD-ROM) (page 31).

•

The region code on the DVD VIDEO does not match the unit (page 31).

• Moisture has condensed inside the unit. Remove the disc and leave the unit turned on at least for 2 hours until the moisture evaporates (page 5).

• If the disc was recorded on other recorder, the unit cannot play the disc if it was not finalized (page 54).

•

Resume play was activated (page 36). Press STOP C (DVD) button twice.

•

You have inserted a disc whose Title menu or DVD menu automatically appears on the TV screen when it is first inserted.

• The DVD VIDEO features an auto playback function.

•

Depending on the disc, you may not be able to do some of the operations above. See the instruction manual supplied with the disc.

• Multilingual tracks are not recorded on the DVD VIDEO, DVD-R or DVD-RW being played.

• The DVD VIDEO prohibits the changing of the language for the sound track.

•Try changing the language using the DVD VIDEO's menu.

• Multilingual subtitle are not recorded on the DVD VIDEO.

• The DVD VIDEO prohibits changing of the subtitles.

•Try changing the subtitle using the DVD VIDEO's menu. Multi-angles are not recorded on the DVD VIDEO being played.

•You are trying to change the angles when icon does not appear on the TV screen (page 43).

• The DVD VIDEO prohibits changing angles.

•Try changing the angle using the DVD VIDEO’s menu.

•You can only watch the channel currently being recorded.

• An unused DVD-R or DVD-RW was inserted. It takes a while for the unit to automatically format a disc.

•

Make sure the tape has a record tab when you record to a cassette tape. If needed, cover the hole with cellophane tape.

• There was a power failure during recording.

•

The units internal clock stopped due to a power failure that lasted for more than 3 seconds. Reset the clock (page 19).

• Disconnect the AC power cord from the AC outlet and connect it again.

•

The program contains copy protection signals that restrict copying.

• The timer setting overlapped with another setting that was set later or has priority.

• It will take a few seconds for the unit to input disc data before recording stops.

• The timer setting overlapped with another setting that was set later or has priority (page 60).

• Disc space was not enough.

inserted in the unit. If not, press POWER button.

OTHERS

TROUBLESHOOTING

OTHERS

TROUBLESHOOTING

Symptom Remedy

Remote control

The remote control does not function. • Batteries are weak.

Others

The unit does not operate properly. • When static electricity causes the unit to operate

The disc tray does not open when you press A OPEN/CLOSE button in the main unit.

My TV/VCR/DVD is showing captions that are misspelled.

My TV/VCR/DVD will not show the text dialogue in its entirety or there is a delay of what is being said.

My captions are scrambled with white boxes on the TV screen.

My program guide listed a TV show as being closed captioned but none of the captions were displayed.

My prerecorded video tape does not show any captions. The tape box mentions it being closed captioned.

My TV screen shows a black box on certain channels.

"Repairing" appears on the display. • If there is a power failure or unplugging during recording,

Repairing

The DVD disc that I recorded will not be played on other DVD units.

The edited Playlist can not be used with other DVD units.

I have finalized the DVD disc, but it will still not be played back on other DVD units.

• There are obstacles between the remote control unit and the main unit.

• The remote control unit is far from the main unit.

• There are no batteries in the remote control unit.

•

The remote control is not pointed at the remote sensor on the unit.

• Check if a cassette tape is in this unit.

abnormally, unplug the unit and wait a few minutes, then plug it in again.

• It may take a few seconds for the disc tray to open after you have recorded or edited a disc.

• The unit may be adding disc data to the disc.

• The unit may still be recording.

•You are watching a live broadcast and spelling errors made by the closed captioning production company may pass through uncorrected. A prerecorded program will not show any misspelled words because of the normal time available for editing the captions.

• Captions that are delayed a few seconds behind the actual are common for live broadcast. Most captioning production companies can display a dialogue to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-todate with the current TV screen dialogue.

• Interference caused by building, power lines, thunderstorms, etc. may cause scrambled or incomplete captions to appear.

• Broadcasters may at times use a time compression process to speed up the actual program so that additional advertising time can be given. Since the decoder cannot read the compressed information, captions will be lost.

• The video tape was either an illegal copy or the tape duplicating company accidentally left out the captioning signals during the copying process.

•You are in the TEXT mode. Set CAPTION mode to CAPTION [OFF].

finalizing, formatting or editing, a Repairing process will begin automatically just after turning the unit on again. It may take several minutes up to about four hours.

•You must "Finalize" all recorded discs before they can be played on other DVD players. Without finalization, Video mode discs cannot be played back on other DVD players and VR mode discs cannot be played back on other VR compatible players (See "Finalizing Discs" on page 54).

• Confirm that the disc is recorded in VR mode and finalized properly.

• This feature may not be available according to circumstances.

• Not all DVD recordable discs will be played on all DVD units. This is inherent in the DVD recordable format.

Disc Error

--- Please eject the disc. --- Playback feature may not be

available on this Disc.

Region Error

--- Please eject the disc. --- Playback is not authorized in your

region.

Parental Lock On

--- Please eject the disc. --- The current selected parental level

Prohibits playback.

Recording Error

This program is not allowed to be recorded.

Recording Error

This program is not recordable in Video mode.

Recording Error

Can not record on this disc.

Recording Error

This program is not allowed to be recorded on this disc.

Recording Error

This disc is protected and not recordable.

Recording Error

Disc is full.

(No area for new recording)

Recording Error

You cannot record more than 99 titles on one disc.

(The maximum is 99)

Recording Error

You cannot record more the 999 chapters on one disc.

(The maximum is 999)

Recording Error

You cannot record on this disc as Control Information is full.

Recording Error

You cannot record on the disc as Power Calibration Area is full.

Recording Error

This disc is already finalized.

CauseError message Solution

Unplayable disc is inserted in the DVD recorder.

Playback is not authorized because the region code of the DVD video disc you inserted is different.

The current selected parental level in the SETUP Menu prohibits playback.

The recording function encountered the copy prohibited program.

You are trying to record the copyonce program onto the DVD-RW disc in Video mode or the DVD-R disc.

You are trying to record onto the disc which is unrecordable, or the disc status prevents recording.

You are trying to record a copyonce program onto a DVD-RW disc which is not compatible with CPRM.

You are trying to record on to the protected disc which is set in the Disc Setting Menu.

You are trying to record onto the disc which has no space for recording.

You are trying to record onto the disc on which the number of recording titles comes up to the maximum (99).

You are trying to record onto the VR mode DVD-RW disc on which the number of recording chapters comes up to the maximum (999).

This disc has no space to write the Control Information when recording or deleting contents.

When editing has been repeatedly performed, the control Information area may come up to be full even the recording area has enough space.

This disc's working area for recording is full.

When recordings are performed repeatedly onto an unstable disc, this area may fill up.

You are trying to record onto the disc already finalized.

Insert the standardized disc which bear the marks on page 31.

Insert the DVD-Video disc with region codes 1 or ALL.

Check the "Parental Lock" setting (page 72).

You cannot record copy prohibited programs.

Set "DVD-RW Recording Format" to "VR mode" (page 49-50).

Insert the recordable disc, and ensure the disc status satisfies the recording requirements (pages 48-55).

Insert a ver.1.1 CPRM compatible DVD-RW disc (page 49).

Release the disc protect setting in the Disc Setting menu (page 55).

Insert the recordable disc with enough recording space.

Delete unnecessary titles (pages 62, 64).

Delete unnecessary chapter markers (pages 63, 66).

Delete unnecessary titles (pages 62, 64).

Insert a new disc.

Release the finalizing for this disc (page 54).

OTHERS

TROUBLESHOOTING

OTHERS

AINTENANCE

CLEANING DISCS

•

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion.

• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records.

CLEANING THE DISC LENS

• If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING GUIDE” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

DISC HANDLING

• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is not used.

CABINET CLEANING

Wipe the front panel and other exterior surfaces of the TV/VCR/DVD with a soft cloth immersed in lukewarm water and wrung dry.

•

•Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR/DVD. Such chemicals may cause damage and discoloration to the exposed surfaces.

AUTO HEAD CLEANING

•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

• Playback picture may become blurred of interrupted while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your TV/VCR/DVD may need to be cleaned.

1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-605-8453, to locate an

Authorized Service Center.

NOTES:

• Remember to read the instructions included with the video head cleaner before use.

• Clean video heads only when problems occur.

SERVICING

•

Should your TV/VCR/DVD become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Please refer to the warranty statement page at the rear of this manual.

ANGUAGE CODE

Language Code Language Code Language CodeLanguage Code

(Afan) Oromo 6159 Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772 Bashkir 4847 Basque 5167 Bengali;Bangla 4860 Bhutani 5072 Bihari 4854 Bislama 4855 Breton 4864 Bulgarian 4853 Burmese 5971 Byelorussian 4851 Cambodian 5759 Catalan 4947 Chinese 7254 Corsican 4961 Croatian 5464 Czech 4965 Danish 5047 Dutch 6058 English 5160 Esperanto 5161 Estonian 5166 Faroese 5261 Fiji 5256

Finnish 5255 French 5264 Frisian 5271 Galician 5358 Georgian 5747 German 5051 Greek 5158 Greenlandic 5758 Guarani 5360 Gujarati 5367 Hausa 5447 Hebrew 5569 Hindi 5455 Hungarian 5467 Icelandic 5565 Indonesian 5560 Interlingua 5547 Interlingue 5551 Inupiak 5557 Irish 5347 Italian 5566 Japanese 5647 Javanese 5669 Kannada 5760 Kashmiri 5765 Kazakh 5757 Kinyarwanda 6469 Kirghiz 5771 Kirundi 6460 Korean 5761 Kurdish 5767 Laothian 5861 Latin 5847 Latvian; Lettish 5868

Lingala 5860 Lithuanian 5866 Macedonian 5957 Malagasy 5953 Malay 5965 Malayalam 5958 Maltese 5966 Maori 5955 Marathi 5964 Moldavian 5961 Mongolian 5960 Nauru 6047 Nepali 6051 Norwegian 6061 Occitan 6149 Oriya 6164 Panjabi 6247 Pashto; Pushto 6265 Persian 5247 Polish 6258 Por tuguese 6266 Quechua 6367 Rhaeto-Romance 6459 Romanian 6461 Russian 6467 Samoan 6559 Sangho 6553 Sanskrit 6547 Scots Gaelic 5350 Serbian 6564 Serbo-Croatian 6554 Sesotho 6566 Setswana 6660 Shona 6560

Sindhi 6550 Singhalese 6555 Siswat 6565 Slovak 6557 Slovenian 6558 Somali 6561 Spanish 5165 Sundanese 6567 Swahili 6569 Swedish 6568 Tagalog 6658 Tajik 6653 Tamil 6647 Tatar 6666 Telugu 6651 Thai 6654 Tibetan 4861 Tigrinya 6655 Tonga 6661 Tsonga 6665 Tu r kish 6664 Tu r kmen 6657 Tw i 6669 Ukrainian 6757 Urdu 6764 Uzbek 6772 Vietnamese 6855 Volapuk 6861 Welsh 4971 Wolof 6961 Xhosa 7054 Yiddish 5655 Yo r uba 7161 Zulu 7267

LOSSARY

Analog audio

An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also "Digital audio".

Aspect ratio

The width of a TV screen is relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high).

Chapter

Just as a book is split up into several chapters, a title on a DVD disc is usually divided into chapters. See also "Title".

CPRM (Content Protection for Recordable Media)

CPRM is a copy protection system with scramble system regarding the recording of "copy-once" broadcast programs (e.g. some satellite broadcasts).

Digital audio

An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44,100 times a second for CD audio) by an analog-to-digital converter, generating a stream of numbers. On playback, a digitalto-analog converter generates an analog signal based on these numbers. See also "Sampling frequency" and "Analog audio".

Dolby Digital

The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo(2ch) or multi-channel audio (up to 6 channels (5.1ch)).

MP3 (MPEG Audio Layer 3)

MP3 is a method of compressing files.You can copy MP3 files on CD-R/RW discs from the computer and play the files on this unit.

Finalize

To make DVD discs, which have been recorded on, possible to play in other DVD players. With this unit, it is possible to finalize DVD-R/DVD-RW discs.

PCM (Pulse Code Modulation)

The most common system of encoding digital audio, found on CDs and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also "Digital audio".

Playlist

From this list you can play contents of a disc as your desired order or in sequence. Also it is allowed to search a specific scene directly.

Regions code

Regions associate discs and players with particular areas of the world. This unit will only play discs that have compatible region codes.You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions).

Sampling frequency

The sound rate is measured by a specified interval to turn into digital audio data. The numbers of sampling in one second defines as sampling frequency. The higher the rate, the better the sound quality as possible as it is.

SAP (Secondary Audio Program)

Second-audio channel delivered separately from main-audio channel. This audio channel is used as an alternate in bilingual broadcasting.

S-Video output

It delivers independently each signal of color(C) and luminance (Y) to TV as video signals, so that higher-quality picture will be gained.

Title (DVD only)

A collection of chapters on DVD disc. See also "Chapter".

Track

Audio CDs use tracks to divide up the content of a disc. The DVD equivalent is called a chapter. See also "Chapter".

OTHERS

MAINTENANCE / LANGUAGE CODE / GLOSSARY

OTHERS

PECIFICATIONS

GENERAL SPECIFICATIONS

CRT 27 inch in-line gun,

90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary four-head Tape width : 1/2 inch Tape speed

SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec.

Tuner channel

TV VHF Low : #2~#6 TV VHF High : #7~#13 TV UHF : #14~#69 CATV VHF : 5A MID band : A5~A1, A~I SUPER band : J~W HYPER band : W+1~W+84

System: DVD-Video, DVD-R/RW,

CD-DA, CD-R/RW

(playback only)

ELECTRICAL SPECIFICATIONS

Sound output: 2 speakers, 1W, 8 ohm

OTHER SPECIFICATIONS

Te r minals

Antenna input: VHF/UHF/CATV

75 ohm unbalanced (F-type) S-Video input: 75 ohm 4 pin mini DIN Video input: RCA connector [ 1 Audio L/R input: RCA connector [ 2 Headphone: 1/8” stereo (3.5 mm) Coaxial digital audio output: One pin jack,

500m Vpp (75 ohm)

Remote control: Digital encoded

infrared light system

Operating temperature: 5°C to 40°C

(41°F~104°F)

Operating humidity: Power requirements: AC 120V, 60Hz Power consumption (Maximum): 143W Picture tube: 27 Pure Flat Dimensions: W:30-9/16” (776mm)

Weight: 94.8 lbs (43kg)

5% to 85% (no condensation)

D:19-15/16” (507mm)

H:25-3/8” (644mm)

NOTE:

• The specifications and design of this product are subject to change without notice.

As an ENERGY STAR ® Partner, our company has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. E

NERGY STAR

is a U.S. registered mark.

MEMO

ESPAÑOL

Enchufe el cable de alimentación CA de esta unidad.

Señal de

Cable

Conecte

Antena

AUDIO OUT COAXIAL

(Trasera de la unidad principal)

ONEXIONES

Conexión de la Unidad Principal

Conexión al Dispositivo de cable o al Dispositivo de satélite

Señal de

Cable

Seleccione esta conexión cuando quiera visualizar o grabar un canal codificado. Con esta conexión, no se puede cambiar de canal en la unidad TV/VCR/DVD. Puede visualizar o grabar ÚNICAMENTE los canales seleccionados en el dispositivo de cable o en el dispositivo de satélite.

• Mientras está grabando, sólo se puede visualizar el canal grabado.

Para seleccionar canales del dispositivo de cable o del dispositivo de satélite

1) Encienda esta unidad pulsando el botón

POWER.Posteriormente, pulse los botones CHANNEL K/L para seleccionar el canal 3 o 4

(el mismo canal que el canal de salida del dispositivo de cable o del dispositivo de satélite).

2) En el dispositivo de cable o del satélite, selec-

cione el canal que quiere visualizar o grabar.

(Dispositivo de cable o

Dispositivo de satélite)

OUT

(Trasera de la unidad principal)

Conexión al Sistema de Audio

• Antes de cambiar las conexiones o instalar la unidad, todos los dispositivos deben estar apagados.

• Lea los manuales de usuario del resto de dispositivos para obtener más información.

Receptor con descodificador Dolby Digital

Clavija de entrada de

COAXIAL

audio digital

Cable de Audio

Coaxial Digital (disponible en tiendas de electrónica)

AUDIO OUT COAXIAL (digital)

NOTA:

• Cuando reproduce un disco DVD con conexión del

AUDIO OUT COAXIAL

TV/VCR/DVD a un receptor con descodificador Dolby Digital, seleccione el "Dolby Digital" en la posición "Stream" para el ajuste "Salida Digital" en el menú SETUP.

• La fuente de audio en un disco DVD en formato de sonido envolvente de canal Dolby Digital 5.1 no puede grabarse en modo de audio digital con una pletina MD o DAT.

• Si el receptor no cuenta con un descodificador Dolby Digital, seleccione "Dolby Digital" en la posición "PCM" para el ajuste "Salida Digital" en el menú SETUP. La reproducción de un DVD utilizando ajustes incorrectos puede acarrear distorsiones de sonido y también puede dañar los altavoces.

• Seleccione "Dolby Digital" en la posición "PCM" para el ajuste "Salida Digital" en el menú SETUP para la conexión a una pletina MD o DAT.

• Mediante la conexión de esta unidad a un receptor multicanal con un descodificador Dolby Digital, puede disfrutar de sonido envolvente de canal Dolby Digital 5.1 de alta calidad similar al obtenido en las salas de cine.

Fabricado bajo licencia de Dolby Laboratories. “Dolby” y el símbolo con una doble D son marcas comerciales de Dolby Laboratories.

NOTA:

• Sólo se podrá reproducir audio de DVD, CD y MP3 en la clavija AUDIO OUT COAXIAL.

AUDIO OUT

COAXIAL

AUDIO OUT COAXIAL

JUSTE DEL IDIOMA DE LOS OSD

ENTER

SETUP

///

CHANNEL K/

RETURN

Numéricos

Puede seleccionar el idioma de los menús en pantalla (OSD).

POWER

SETUP

///

ENTER

1 Pulse el botón POWER para encender la unidad.

Pulse el botón SETUP para acceder al menú

SETUP/DISC. Aparecerá el menú SETUP/DISC.

Seleccione "SETUP" utilizando los botones s /B,

después pulse el botón ENTER. Aparecerá el menú SETUP.

JUSTE DE CANALES

4 Seleccione "Display" utilizando los botones

K/L

s /B

, después pulse el botón ENTER.

Aparecerá la ventana de opciones.

Seleccione "OSD Language" utilizando los

botones K/L, después pulse el botón ENTER.

NOTA:

• El idioma por defecto de los OSD es el inglés.

Seleccione el idioma deseado de entre

"English", "Français" y "Español" utilizando los botones K/L, después pulse el botón ENTER.

Se activará el ajuste de idioma seleccionado.

Preparación > Pantalla

Transpa. de Fondo OSD Color de Fondo de OSD Ajste d Idioma de OSD1Inglés Ahorro de la Pantalla Titulo Ajuste de V-CHIP

VCR DVD

35%

English Français

10 minutos Español

OFF

7 Pulse el botón SETUP para salir del Menú de

Preparación.

1 Pulse el botón SETUP para acceder al menú

2 Seleccione "SETUP" utilizando los botones

SETUP/DISC. Aparecerá el menú SETUP/DISC.

s /B

después pulse el botón ENTER. Aparecerá el Menú de Preparación.

Seleccione "Channel" utilizando los botones

K/L

s /B

, después pulse el botón ENTER.

Aparecerá el menú Ajuste de Canal.

Seleccione "Ajuste Auto" utilizando los botones

K/L

, después pulse el botón ENTER.

La unidad comenzará a realizar una búsqueda de los canales disponibles en su zona.

Para cancelar el Ajuste Auto durante la búsqueda: Pulse el botón RETURN o el botón SETUP para

cancelar la operación.

CH 18

Ahora en Ajuste Auto

ESPAÑOL

NOTA:

• Si se cancela la operación Ajuste Auto antes de completar el ajuste previo, puede que algunos canales que no se hayan ajustado previamente no se encuentren disponibles.

La selección dependerá de cómo recibe los canales de televisión.

•

Pulse el botón SETUP para salir del menú.

Puede seleccionar únicamente los canales memorizados en esta unidad utilizando los botones CHANNELK/L.

Para seleccionar un canal: Puede seleccionar un canal introduciendo direc-

tamente el mismo utilizando los botones numéricos del mando a distancia.

Notas para la utilización de los botones

numéricos:

• Cuando seleccione los canales de cable superiores al número 99, introduzca los números de canal como dígito de tres cifras. (Por ejemplo: 117, pulse 1,1,7)

• Debe introducir delante de los números de canales de una cifra el número cero (Por ejemplo: 02, 03, 04 y en adelante).

Puede seleccionar el modo de entrada en línea (“AUX”). Para

• seleccionar “AUX” pulse [0], [0]. Más información en la página 56.

CONEXIONES / AJUSTE DEL IDIOMA DE LOS OSD / AJUSTE DE CANALES

POWER

CHANNEL K/

VOLUME X/

Numéricos

ESPAÑOL

UNCIONES DE TELEVISIÓN

Visualización de un programa de televisión

Pulse el botón POWER para encender la unidad.

UNCIONES VCR

Reproducción

VCR

POWER

CHANNEL K/

2 Seleccione el canal deseado utilizando los

botones CHANNELK/Lo los botones numéricos del mando a distancia.

Si la unidad TV/VCR/DVD está conectada a un dispositivo de cable o de satélite, el TV/VCR/DVD deberá encontrarse en el canal 3 o 4 y, en tal caso, el canal que desee visualizar deberá seleccionarlo desde el dispositivo de cable o del satélite.

Ajuste el volumen al nivel deseado utilizando los

botones VOLUMEX/Y.

4 Ajuste el control de la imagen para obtener un

aspecto natural.

Cuando termine de ver la televisión, pulse el

botón POWER para apagar el televisor.

Introduzca la cinta pregrabada y pulse el botón

PLAY B (VCR) para comenzar la reproducción.

NOTA:

• Cuando se introduce una cinta sin etiqueta de grabación, la reproducción comenzará automáticamente.

• El rastreo de pistas se ajustará automáticamente cuando comience la reproducción. Para ajustarlo manualmente, pulse los botones CHANNELK/Lde la unidad principal o los botones CHANNELK/Ldel mando a distancia.

PLAY B (VCR)

STOP C (VCR)

1 Pulse el botón POWER para encender la unidad.

///

Pulse el botón STOP C (VCR) para detener la

reproducción.

4 Pulse el botón C STOP/

principal para extraer la cinta.

EJECT de la unidad

UNCIONES DE DVD

Reproducción

DVD-RDVD-V

DVD-RW (VR)

POWER

TOP MENU

ENTER

Pulse el botón POWER.

2 Pulse el botón

principal para abrir la bandeja de discos. La bandeja de discos se abrirá.

Coloque el disco en la bandeja de discos con la

etiqueta hacia arriba y asegúrese de que se ajuste perfectamente a la guía. Pulse el botón

OPEN/CLOSE otra vez para cerrar la bande-

ja de discos.

NOTA:

• Esta operación puede tardar unos minutos en completarse.

• Puede que algunos discos se reproduzcan automáticamente.

• Si reproduce un disco de vídeo DVD, puede que aparezca un menú.

OPEN/CLOSE de la unidad

DVD-RW (Video)

DISC MENU

///

STOP C (DVD)

Modo de VR:

Original

MP3CD

ENE/1 12:00AM

ENE/1 3:00AM

1 1 32

ENE/1 1:00AM ENE/1 2:00AM

ENE/1 4:00AM

Botón DISC MENU

Playlist

1 1 32

ENE/1 12:00AM

ENE/1 1:00AM ENE/1 2:00AM

ENE/1 3:00AM

ENE/1 4:00AM

MP3:

Lista de Archivos MP3

NOMBRE DEL DISCO

NOMBRE DE LA CARPETA 1 NOMBRE DE LA CARPETA 2 NOMBRE DE LA CARPETA 3 NOMBRE DE LA CARPETA 4 NOMBRE DE LA CARPETA 5 NOMBRE DE LA CARPETA 6 1 NOMBRE DEL ARCHIVO 1 2 NOMBRE DEL ARCHIVO 2

1/2

NOTA:

• Pulse el botón TOP MENU para salir del menú.

•Para discos DVD-R (Modo de Video) y DVD-RW (Modo de Video) que ya han sido ultimados, se mostrará una lista de títulos en lugar de pequeñas reseñas tal y como se muestra posteriormente.

Menú Título

CH9612:24AMENE/1

ESPAÑOL

guía de la bandeja de discos

4 Pulse el botón TOP MENU para acceder al

menú de títulos. Puede cambiar entre los modos "Original" o

"Playlist" de VR utilizando el botón DISC MENU. Modo de Video:

Lista de Títulos

1 1 32

ENE/1 12:00AM

ENE/1 1:00AM ENE/1 2:00AM

ENE/1 3:00AM

ENE/1 4:00AM

Seleccione el título deseado pulsando los

botones K/L/

s /B

, posteriormente pulse el

botón ENTER. Comenzará la reproducción.

6 Pulse el botón STOP C (DVD) para detener la

reproducción. Para extraer el disco, pulse el botón AOPEN/CLOSE

para abrir la bandeja del disco y después retírelo antes de apagar la unidad.

FUNCIONES DE TELEVISIÓN / FUNCIONES VCR / FUNCIONES DE DVD

DVD-RW VR DVD-RW Video

Desea

Grabar programas de televisión Reutilizar borrando contenidos no deseados Editar los contenidos grabados Editar / Grabar desde un equipo conectado Copiar discos para su distribución Reproducir en otro equipo de DVD

DVD-RW VR DVD-RW Video

Características

Grabación

¿Regrabable? Sí Sí Puede crear capítulos en intervalos fijos (auto.) Sí Sí Puede crear capítulos allí donde lo desee (manual) Sí No Puede grabar imágenes de 16:9 Sí Sí Puede grabar programas de una sola copia Sí No

Edición

Puede efectuar funciones de edición básicas Sí Sí Puede efectuar funciones de edición avanzadas (Edición de Playlist)

Sí No

No Sí No Sí No

Sí No

El DVD-RW (Modo de VR) sólo puede reproducirse en equipos de DVD compatibles con VR.

NOTA:

Para más información acerca de las funciones anteriormente descritas y sus restricciones implícitas, diríjase a las explicaciones contenidas en el manual.

DVD-R

: El más adecuado. : Puede utilizarse. : Algunas funciones están limitadas. : No puede utilizarse.

Cargando

ESPAÑOL

RABACIÓN FÁCIL DE DVD

Lo que sigue a continuación de ayudará a comprender fácilmente cómo grabar discos DVD.

NOTA

• Asegúrese de haber completado las conexiones y de haber colocado pilas en el mando a distancia.

Paso 1: Escoja el tipo de

disco

Existen varios tipos de discos de DVD grabables entre los que escoger. Escoja el tipo seleccionado de entre los “Tipos de disco DVD” de esta página.

Esta unidad sólo puede grabar sobre los siguientes tipos de discos.

(o)

* Esta unidad no puede grabar sobre

los siguientes discos.

•DVD-R General Ver 2.0 / 8x

•DVD-RW Ver 1.2 / 2-4x CPRM compatible

Por ejemplo, cuando desee grabar repetidamente sobre el mismo disco o cuando desee editar el disco después de la grabación, escoja el tipo de disco regrabable DVD-RW. Cuando desee guardar grabaciones sin efectuar cambios, puede escoger un disco no regrabable DVD-R.

Paso 2: Introduzca

un disco en blanco

Encienda la unidad

Abra la bandeja

de discos Cierre la bandeja

de discos

Mando a distan-

NOTA:

• Esta operación puede llevarle unos minutos.

Paso 3: Seleccione la

velocidad de grabación

Para seleccionar la velocidad de grabación, pulse una vez el botón REC SPEED, posteriormente, cambie la velocidad de grabación pul-

K/L

sando los botones

SP 1:01 Rem.

Tipos de disco DVD

Importante

Formatee el disco

Introduzca el disco en la unidad. Posteriormente, formatee el disco desde el menú SETUP. Se encontrarán disponibles las opciones de formateo de Vídeo (Modo de Video) o formateo de grabación de Vídeo (Modo de VR) en función del tipo de disco introducido. Esto es esencial para preparar el disco para la grabación. Más información en las páginas 48-49. * Cuando efectúa el forma-

teo, todos los contenidos del disco se borran.

Finalización del disco

Después de la grabación, deberá finalizar los discos DVD grabados en esta unidad antes de poder reproducirlos en otros reproductores de DVD. Diríjase a la página 54.

Paso 4: Seleccione

el canal deseado

Paso 5: Pulse el

botón DVD RECORD

Paso 6: Detenga la

Grabación

58%

CH 1

DISC

Escrit de datos

DISC

NOTA:

• Esta operación pude llevarle varios minutos.

Reproducción de los contenidos grabados

Puede seleccionar el título que desee reproducir desde un menú mostrado y comenzar inmediatamente la reproducción. Los contenidos graba-

Comenzar la

Grabación.

dos son muy accesibles en un disco, el procedimiento es realmente sencillo cuando selecciona un título en un capítulo del menú de pantalla.

¿Qué son los títulos y los capítulos?

Los contenidos del disco DVD se dividen normalmente en títulos. Los títulos pueden dividirse además en capítulos.

Título 1 Título 2

Capítulo 1 Capítulo 1Capítulo 2 Capítulo 3 Capítulo 2

Detener / Comenzar

Detener la

Grabación.

Edición del disco grabado

Le resultará muy fácil editar discos. Esta unidad ofrece sencillas funciones de edición que sólo se encuentra disponibles en discos DVD-R/RW.

Puede editar lo siguiente a partir de una lista de Títulos.

• Nombrar títulos

• Establecer imágenes para pequeñas reseñas (Modo de VR)

•Establecer / eliminar marcadores de capítulo

• Borrar partes de título o escena (Modo de VR) Borrar título : Esta función borra una escena completa de forma permanente del disco. Borrar escena :

Original y Playlist (Modo de VR)

Puede editar las grabaciones en una Playlist sin modificar las grabaciones originales. Las Listas de Reproducción no ocupan mucho espacio en el disco.

¿Para qué sirve “Original” o “Playlist”?

A lo largo de este manual, encontrará los términos Original y Playlist para referirse al contenido real de la versión editada.

• Contenido Original se refiere a lo que realmente hay grabado en el disco.

• Contenido de la Playlist se refiere a la versión editada del disco, cómo debe reproducirse el contenido original.

Esto permite al usuario editar una escena específica (p.e., anuncios publicitarios).

ESPAÑOL

GRABACIÓN FÁCIL DE DVD

Finalización del Disco

• Esto le permitirá reproducir un disco grabado en nuestra unidad en otro reproductor de DVD. Sin efectuar esta operación, no podrá reproducirlo en otro reproductor.

•Tras finalizar un disco, si la grabación se encontraba en Modo de Video, no podrá editar ninguna información dentro del disco.

• Si ha grabado en Modo de VR en un disco DVD-RW, entonces podrá editar el disco después de la finalización. Véase la página 54.

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the

date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not supplied by FUNAI CORP. or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO A FUNAI AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE.

To locate your nearest SYLVANIA Authorized Service Center or for general service procedure, please call 1-800-605-8453 or write to the following:

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Tel :1-800-605-8453

http://www.funai-corp.com

Head Office: 100 North Street, Teterboro, NJ 07608

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Printed in Malaysia 1EMN20176

T2021UB ★★★★★

documentation manual, user maintenance, brochure, user reference, pdf manual

This file has been downloaded from:

User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes..

Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide,

manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product,

Funai 6727FRE User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual