All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto
is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the content
herein without the obligation to notify any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way
without the express written consent of Funai. All other trademarks used herein remain the exclusive property of
their respective owners. Nothing contained in this manual should be construed as granting, by implication or
otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any
other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights
to the fullest extent of the law.
A91F3UH/A91F0UH/A91F1UH/A91F4UH
090406
Page 2
IMPORTANT SAFETY NOTICE
o
Proper service and repair is important to the safe, reliable operation of all
Funai Equipment. The service procedures recommended by Funai and
described in this service manual are effective methods of performing
service operations. Some of these service special tools should be used
when and as recommended.
It is important to note that this service manual contains various CAUTIONS
and NOTICES which should be carefully read in order to minimize the risk
of personal injury to service personnel. The possibility exists that improper
service methods may damage the equipment. It also is important to
understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE.
Funai could not possibly know, evaluate and advice the service trade of all
conceivable ways in which service might be done or of the possible
hazardous consequences of each way. Consequently, Funai has not
undertaken any such broad evaluation. Accordingly, a servicer who uses a
service procedure or tool which is not recommended by Funai must first
use all precautions thoroughly so that neither his safety nor the safe
operation of the equipment will be jeopardized by the service method
selected.
The LCD panel is manufactured to provide many years of useful life.
Occasionally a few non active pixels may appear as a tiny spec of col
This is not to be considered a defect in the LCD screen.
Prior to shipment from the factory, our products are strictly inspected for recognized product safety and electrical
codes of the countries in which they are to be sold. However, in order to maintain such compliance, it is equally
important to implement the following precautions when a set is being serviced.
Safety Precautions for LCD TV
Circuit
1. Before returning an instrument to the
customer, always make a safety check of the
entire instrument, including, but not limited to, the
following items:
a. Be sure that no built-in protective devices are
defective and have been defeated during
servicing. (1) Protective shields are provided
on this chassis to protect both the technician
and the customer. Correctly replace all missing
protective shields, including any removed for
servicing convenience. (2) When reinstalling
the chassis and/or other assembly in the
cabinet, be sure to put back in place all
protective devices, including but not limited to,
nonmetallic control knobs, insulating
fishpapers, adjustment and compartment
covers/shields, and isolation resistor/capacitor
networks. Do not operate this instrument or
permit it to be operated without all
protective devices correctly installed and
functioning. Servicers who defeat safety
features or fail to perform safety checks
may be liable for any resulting damage.
b. Be sure that there are no cabinet openings
through which an adult or child might be able to
insert their fingers and contact a hazardous
voltage. Such openings include, but are not
limited to, (1) spacing between the Liquid
Crystal Panel and the cabinet mask, (2)
excessively wide cabinet ventilation slots, and
(3) an improperly fitted and/or incorrectly
secured cabinet back cover.
c. Antenna Cold Check - With the instrument AC
plug removed from any AC source, connect an
electrical jumper across the two AC plug
prongs. Place the instrument AC switch in the
on position. Connect one lead of an ohmmeter
to the AC plug prongs tied together and touch
the other ohmmeter lead in turn to each tuner
antenna input exposed terminal screw and, if
applicable, to the coaxial connector. If the
measured resistance is less than 1.0 megohm
or greater than 5.2 megohm, an abnormality
exists that must be corrected before the
instrument is returned to the customer. Repeat
this test with the instrument AC switch in the off
position.
d. Leakage Current Hot Check - With the
instrument completely reassembled, plug the
AC line cord directly into a 120 V AC outlet. (Do
not use an isolation transformer during this
test.) Use a leakage current tester or a
metering system that complies with American
National Standards Institute (ANSI) C101.1
Leakage Current for Appliances and
Underwriters Laboratories (UL) 1410, (50.7).
With the instrument AC switch first in the on
position and then in the off position, measure
from a known earth ground (metal water pipe,
conduit, etc.) to all exposed metal parts of the
instrument (antennas, handle brackets, metal
cabinet, screw heads, metallic overlays, control
shafts, etc.), especially any exposed metal
parts that offer an electrical return path to the
chassis. Any current measured must not
exceed 0.5 milli-ampere. Reverse the
instrument power cord plug in the outlet and
repeat the test.
READING SHOULD
NOT BE ABOVE 0.5 mA
LEAKAGE
DEVICE
BEING
TESTED
TEST ALL EXPOSED
METAL SURFACES
ALSO TEST WITH
PLUG REVERSED
USING AC
ADAPTER PLUG
AS REQUIRED
ANY MEASUREMENTS NOT WITHIN THE
LIMITS SPECIFIED HEREIN INDICATE A
POTENTIAL SHOCK HAZARD THAT MUST
BE ELIMINATED BEFORE RETURNING THE
INSTRUMENT TO THE CUSTOMER OR
BEFORE CONNECTING THE ANTENNA OR
ACCESSORIES.
2. Read and comply with all caution and safety-
related notes on or inside the receiver cabinet, on
the receiver chassis, or on the Liquid Crystal
Panel.
CURRENT
TESTER
+
EARTH
GROUND
_
2-1LTVN_ISP
Page 6
3. Design Alteration Warning - Do not alter or add
to the mechanical or electrical design of this TV
receiver. Design alterations and additions,
including, but not limited to circuit modifications
and the addition of items such as auxiliary audio
and/or video output connections, might alter the
safety characteristics of this receiver and create a
hazard to the user. Any design alterations or
additions will void the manufacturer's warranty and
may make you, the servicer, responsible for
personal injury or property damage resulting
therefrom.
4. Hot Chassis Warning a. Some TV receiver chassis are electrically
connected directly to one conductor of the AC
power cord and maybe safety-serviced without
an isolation transformer only if the AC power
plug is inserted so that the chassis is
connected to the ground side of the AC power
source. To confirm that the AC power plug is
inserted correctly, with an AC voltmeter,
measure between the chassis and a known
earth ground. If a voltage reading in excess of
1.0 V is obtained, remove and reinsert the AC
power plug in the opposite polarity and again
measure the voltage potential between the
chassis and a known earth ground.
b. Some TV receiver chassis normally have 85V
AC(RMS) between chassis and earth ground
regardless of the AC plug polarity. This chassis
can be safety-serviced only with an isolation
transformer inserted in the power line between
the receiver and the AC power source, for both
personnel and test equipment protection.
c. Some TV receiver chassis have a secondary
ground system in addition to the main chassis
ground. This secondary ground system is not
isolated from the AC power line. The two
ground systems are electrically separated by
insulation material that must not be defeated or
altered.
5. Observe original lead dress. Take extra care to
assure correct lead dress in the following areas: a.
near sharp edges, b. near thermally hot parts-be
sure that leads and components do not touch
thermally hot parts, c. the AC supply, d. high
voltage, and, e. antenna wiring. Always inspect in
all areas for pinched, out of place, or frayed wiring.
Check AC power cord for damage.
6. Components, parts, and/or wiring that appear to
have overheated or are otherwise damaged
should be replaced with components, parts, or
wiring that meet original specifications.
Additionally, determine the cause of overheating
and/or damage and, if necessary, take corrective
action to remove any potential safety hazard.
7. Product Safety Notice - Some electrical and
mechanical parts have special safety-related
characteristics which are often not evident from
visual inspection, nor can the protection they give
necessarily be obtained by replacing them with
components rated for higher voltage, wattage, etc.
Parts that have special safety characteristics are
identified by a # on schematics and in parts lists.
Use of a substitute replacement that does not
have the same safety characteristics as the
recommended replacement part might create
shock, fire, and/or other hazards. The product's
safety is under review continuously and new
instructions are issued whenever appropriate.
Prior to shipment from the factory, our products
are strictly inspected to confirm they comply with
the recognized product safety and electrical codes
of the countries in which they are to be sold.
However, in order to maintain such compliance, it
is equally important to implement the following
precautions when a set is being serviced.
2-2LTVN_ISP
Page 7
Precautions during Servicing
A. Parts identified by the # symbol are critical for
safety.
Replace only with part number specified.
B. In addition to safety, other parts and assemblies
are specified for conformance with regulations
applying to spurious radiation. These must also be
replaced only with specified replacements.
Examples: RF converters, RF cables, noise
blocking capacitors, and noise blocking filters, etc.
C. Use specified internal wiring. Note especially:
1) Wires covered with PVC tubing
2) Double insulated wires
3) High voltage leads
D. Use specified insulating materials for hazardous
live parts. Note especially:
1) Insulation Tape
2) PVC tubing
3) Spacers
4) Insulators for transistors.
E. When replacing AC primary side components
(transformers, power cord, etc.), wrap ends of
wires securely about the terminals before
soldering.
F.Observe that the wires do not contact heat
producing parts (heat sinks, oxide metal film
resistors, fusible resistors, etc.)
G. Check that replaced wires do not contact sharp
edged or pointed parts.
H. When a power cord has been replaced, check that
5~6 kg of force in any direction will not loosen it.
I.Also check areas surrounding repaired locations.
J. Use care that foreign objects (screws, solder
droplets, etc.) do not remain inside the set.
K. When connecting or disconnecting the internal
connectors, first, disconnect the AC plug from the
AC supply outlet.
L. When installing parts or assembling the cabinet
parts, be sure to use the proper screws and
tighten certainly.
2-3LTVN_ISP
Page 8
Safety Check after Servicing
Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts and
wires have been returned to original positions. Afterwards, perform the following tests and confirm the specified
values in order to verify compliance with safety standards.
1. Clearance Distance
When replacing primary circuit components, confirm
specified clearance distance (d) and (d') between
soldered terminals, and between terminals and
surrounding metallic parts. (See Fig. 1)
Table 1: Ratings for selected area
Chassis or Secondary Conductor
Primary Circuit
AC Line VoltageRegion
110 to 130 V
Note: This table is unofficial and for reference only. Be
sure to confirm the precise values.
U.S.A. or
Canada
Clearance
Distance (d), (d’)
≥ 3.2 mm
(0.126 inches)
2. Leakage Current Test
Confirm the specified (or lower) leakage current
between B (earth ground, power cord plug prongs) and
externally exposed accessible parts (RF terminals,
antenna terminals, video and audio input and output
terminals, microphone jacks, earphone jacks, etc.) is
lower than or equal to the specified value in the table
below.
Measuring Method: (Power ON)
Insert load Z between B (earth ground, power cord plug
prongs) and exposed accessible parts. Use an AC
voltmeter to measure across both terminals of load Z.
See Fig. 2 and following table.
d'd
Fig. 1
Exposed Accessible Part
Z
AC Voltmeter
(High Impedance)
Earth Ground
B
Power Cord Plug Prongs
Table 2: Leakage current ratings for selected areas
AC Line VoltageRegionLoad ZLeakage Current (i)Earth Ground (B) to:
110 to 130 V
Note: This table is unofficial and for reference only. Be sure to confirm the precise values.
U.S.A. or
Canada
0.15 µF CAP. & 1.5 kΩ
RES. Connected in parallel
2-4LTVN_ISP
i ≤ 0.5 mA rms
Fig. 2
Exposed accessible
parts
Page 9
STANDARD NOTES FOR SERVICING
Circuit Board Indications
1. The output pin of the 3 pin Regulator ICs is
indicated as shown.
Top View
Out
2. For other ICs, pin 1 and every fifth pin are
indicated as shown.
Pin 1
3. The 1st pin of every male connector is indicated as
shown.
Pin 1
Input
In
Bottom View
5
10
Pb (Lead) Free Solder
Pb free mark will be found on PCBs which use Pb
free solder. (Refer to figure.) For PCBs with Pb free
mark, be sure to use Pb free solder. For PCBs
without Pb free mark, use standard solder.
Pb free mark
How to Remove / Install Flat Pack-IC
1. Removal
With Hot-Air Flat Pack-IC Desoldering Machine:
1. Prepare the hot-air flat pack-IC desoldering
machine, then apply hot air to the Flat Pack-IC
(about 5 to 6 seconds). (Fig. S-1-1)
Fig. S-1-1
2. Remove the flat pack-IC with tweezers while
applying the hot air.
3. Bottom of the flat pack-IC is fixed with glue to the
CBA; when removing entire flat pack-IC, first apply
soldering iron to center of the flat pack-IC and heat
up. Then remove (glue will be melted). (Fig. S-1-6)
4. Release the flat pack-IC from the CBA using
tweezers. (Fig. S-1-6)
CAUTION:
1. The Flat Pack-IC shape may differ by models. Use
an appropriate hot-air flat pack-IC desoldering
machine, whose shape matches that of the Flat
Pack-IC.
2. Do not supply hot air to the chip parts around the
flat pack-IC for over 6 seconds because damage
to the chip parts may occur. Put masking tape
around the flat pack-IC to protect other parts from
damage. (Fig. S-1-2)
3-1TVN_SN
Page 10
3. The flat pack-IC on the CBA is affixed with glue, so
be careful not to break or damage the foil of each
pin or the solder lands under the IC when
removing it.
With Soldering Iron:
1. Using desoldering braid, remove the solder from
all pins of the flat pack-IC. When you use solder
flux which is applied to all pins of the flat pack-IC,
you can remove it easily. (Fig. S-1-3)
CBA
Masking
Tape
Tweezers
Hot-air
Flat Pack-IC
Desoldering
Machine
Flat Pack-IC
Fig. S-1-2
Flat Pack-IC
Desoldering Braid
Soldering Iron
Fig. S-1-3
2. Lift each lead of the flat pack-IC upward one by
one, using a sharp pin or wire to which solder will
not adhere (iron wire). When heating the pins, use
a fine tip soldering iron or a hot air desoldering
machine. (Fig. S-1-4)
Sharp
Pin
Fine Tip
Soldering Iron
Fig. S-1-4
3. Bottom of the flat pack-IC is fixed with glue to the
CBA; when removing entire flat pack-IC, first apply
soldering iron to center of the flat pack-IC and heat
up. Then remove (glue will be melted). (Fig. S-1-6)
4. Release the flat pack-IC from the CBA using
tweezers. (Fig. S-1-6)
3-2TVN_SN
Page 11
With Iron Wire:
1. Using desoldering braid, remove the solder from
all pins of the flat pack-IC. When you use solder
flux which is applied to all pins of the flat pack-IC,
you can remove it easily. (Fig. S-1-3)
2. Affix the wire to a workbench or solid mounting
point, as shown in Fig. S-1-5.
3. While heating the pins using a fine tip soldering
iron or hot air blower, pull up the wire as the solder
melts so as to lift the IC leads from the CBA
contact pads as shown in Fig. S-1-5.
4. Bottom of the flat pack-IC is fixed with glue to the
CBA; when removing entire flat pack-IC, first apply
soldering iron to center of the flat pack-IC and heat
up. Then remove (glue will be melted). (Fig. S-1-6)
5. Release the flat pack-IC from the CBA using
tweezers. (Fig. S-1-6)
Note: When using a soldering iron, care must be
taken to ensure that the flat pack-IC is not
being held by glue. When the flat pack-IC is
removed from the CBA, handle it gently
because it may be damaged if force is applied.
Hot Air Blower
2. Installation
1. Using desoldering braid, remove the solder from
the foil of each pin of the flat pack-IC on the CBA
so you can install a replacement flat pack-IC more
easily.
2. The “●” mark on the flat pack-IC indicates pin 1.
(See Fig. S-1-7.) Be sure this mark matches the 1
on the PCB when positioning for installation. Then
presolder the four corners of the flat pack-IC. (See
Fig. S-1-8.)
3. Solder all pins of the flat pack-IC. Be sure that
none of the pins have solder bridges.
Example :
Pin 1 of the Flat Pack-IC
is indicated by a " " mark.
Fig. S-1-7
To Solid
Mounting Point
CBA
Tweezers
Iron Wire
Soldering Iron
Fig. S-1-5
Fine Tip
Soldering Iron
Flat Pack-IC
or
Presolder
Flat Pack-IC
CBA
Fig. S-1-8
Fig. S-1-6
3-3TVN_SN
Page 12
Instructions for Handling Semiconductors
Electrostatic breakdown of the semi-conductors may
occur due to a potential difference caused by
electrostatic charge during unpacking or repair work.
1. Ground for Human Body
Be sure to wear a grounding band (1 MΩ) that is
properly grounded to remove any static electricity that
may be charged on the body.
2. Ground for Workbench
Be sure to place a conductive sheet or copper plate
with proper grounding (1 MΩ) on the workbench or
other surface, where the semi-conductors are to be
placed. Because the static electricity charge on
clothing will not escape through the body grounding
band, be careful to avoid contacting semi-conductors
with your clothing.
<Incorrect>
<Correct>
1MΩ
CBA
Grounding Band
1MΩ
CBA
Conductive Sheet or
Copper Plate
3-4TVN_SN
Page 13
CABINET DISASSEMBLY INSTRUCTIONS
[LC320SLX, 32MF339B/F7, LC320SSX]
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[1] Stand
Assembly
[10] Junction
CBA
[2] Rear Cabinet
[3] Inverter CBA
[4] Jack CBA
[5] Power Supply
CBA
[6] Jack Holder
[7] Digital Main
CBA Unit
[13] LCD Module
Assembly
[14] Front
Cabinet
[8] Speaker
Holder (L,R)
[9] Speaker(s)
[11] IR Sensor
CBA
[12] Function
CBA
Removal
Step/
Loc.
No.
Part
Fig.
Remove/*Unhook/
Unlock/Release/
No.
Unplug/Unclamp/
Desolder
[6]Jack Holder D2 2(S-8)---
Digital Main
[7]
CBA UnitD2D4
4(S-9), 2(S-10),
4(S-11), *CN3902,
Shield Box
Speaker
[8]
Holder
D3 *Hook---
(L,R)
[9]Speaker(s)D3 8(S-12)---
[10]
[11]
[12]
Junction
CBA
IR Sensor
CBA
Function
CBA
D3
Desolder---
D4
D3
2(S-13), *CL103C---
D4
D3
2(S-14)---
D4
LCD
[13]
Module
D3 (S-15)---
Assembly
Front
[14]
↓
(1)
Cabinet
↓
(2)
D3 ------------------
↓
(3)
↓
(4)
Note
---
↓
(5)
2. Disassembly Method
Removal
Step/
Loc.
Part
No.
Stand
[1]
Assembly
Rear
[2]
Cabinet
Inverter
[3]
CBA
[4]Jack CBA
Power
[5]
Supply
CBA
Remove/*Unhook/
Fig.
No.
Unlock/Release/
Unplug/Unclamp/
Desolder
D1 4(S-1)---
D1 13(S-2), 2(S-3), 3(S-4)---
6(S-5), *CN1001,
D2
*CN1003, *CN1050,
D4
*CN1100, *CN1150,
*CN1200, *CN1900
D2
2(S-6), *CL701B---
D4
7(S-7), *CN101,
D2
*CN301, *CN302,
D4
*CN801, *CN802
Note
---
---
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Ta bl e ."
4-1A91F3DC
Page 14
(S-4)
(S-2)
[2] Rear Cabinet
[1] Stand Assembly
(S-2)
(S-1)
(S-3)
(S-4)
(S-2)
(S-4)
(S-2)
Fig. D1
4-2A91F3DC
Page 15
[3] Inverter CBA
(S-5)
(S-11)
[7] Digital Main
CBA Unit
(S-8)
[4] Jack CBA
Shield Box
[6] Jack Holder
(S-6)
(S-9)
(S-10)
(S-9)
(S-7)
(S-7)
(S-7)
(S-5)
[5] Power Supply CBA
Fig. D2
4-3A91F3DC
Page 16
[14] Front Cabinet
[13] LCD Module
Assembly
Hook
[10] Junction
CBA
(S-12)
[9] Speaker
[8] Speaker Holder (L)
(S-15)
Hook
[8] Speaker Holder (R)
[11] IR Sensor CBA
(S-13)
(S-12)
[9] Speaker
[12] Function CBA
(S-14)
Fig. D3
4-4A91F3DC
Page 17
TV Cable Wiring Diagram
Jack
CBA
Inverter CBA
CN1050
Power Supply CBA
CL701B
CN302
CN301
CN101
Digital Main
CBA Unit
CL701A
CN802
To Speaker
CN602
AC CORD
CN801
Junction
CBA
CN201
CN1001
CN1900
CN1003
To LCD Module
Assembly
CN1100
CN1150
CN1200
CN3702
CN3701
CN3902
To LCD Module
Assembly
CN101
IR Sensor CBA
CL103C
4-5A91F3DC
CL102A
Function CBA
CL103B
CL101B
Fig. D4
Page 18
CABINET DISASSEMBLY INSTRUCTIONS
[LC320EMX]
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[1] Stand
Assembly
[12] Junction
CBA
[2] Rear Cabinet
[3] Inverter CBA
[4] Jack CBA
[5] Power Supply
CBA
[6] Jack Holder
[7] Digital Main
CBA Unit
[8] LCD Module
Assembly
[15] Front
Cabinet
[9] Speaker
Holder(s) [R]
[10] Speaker
Holder(s) [L]
[11] Speaker(s)
[13] IR Sensor
CBA
[14] Function
CBA
2. Disassembly Method
Removal
Step/
Loc.
Part
No.
Stand
[1]
Assembly
Rear
[2]
Cabinet
Inverter
[3]
CBA
[4]Jack CBA
Power
[5]
Supply
CBA
Remove/*Unhook/
Fig.
No.
Unlock/Release/
Unplug/Unclamp/
Note
Desolder
D1 4(S-1)---
D1 13(S-2), 2(S-3), 3(S-4)---
6(S-5), *CN1001,
D2
*CN1003, *CN1050,
D4
*CN1100, *CN1150,
*CN1200, *CN1900
D2
2(S-6), *CL701B---
D4
7(S-7), *CN101,
D2
*CN301, *CN302,
D4
*CN801, *CN802
---
---
Removal
Step/
Loc.
No.
Part
Fig.
Remove/*Unhook/
Unlock/Release/
No.
Unplug/Unclamp/
Note
Desolder
[6]Jack Holder D2 2(S-8)---
Digital Main
[7]
CBA UnitD2D4
4(S-9), 2(S-10),
4(S-11), *CN3902,
Shield Box
---
LCD
[8]
Module
D3 (S-12)---
Assembly
Speaker
[9]
Holder(s)
D3 2(S-13)---
[R]
Speaker
[10]
Holder(s)
D3 2(S-14)---
[L]
[11] Speaker(s)D3 ------------------
[12]
[13]
[14]
[15]
↓
(1)
Junction
CBA
IR Sensor
CBA
Function
CBA
Front
Cabinet
↓
(2)
D3
Desolder---
D4
D3
2(S-15), *CL103C---
D4
D3
------------------
D4
D3 ------------------
↓
(3)
↓
(4)
↓
(5)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Ta bl e ."
4-6A91F4DC
Page 19
(S-4)
(S-2)
[2] Rear Cabinet
[1] Stand Assembly
(S-2)
(S-1)
(S-3)
(S-4)
(S-2)
(S-4)
(S-2)
Fig. D1
4-7A91F4DC
Page 20
[3] Inverter CBA
(S-5)
(S-11)
[7] Digital Main
CBA Unit
(S-8)
[4] Jack CBA
Shield Box
[6] Jack Holder
(S-6)
(S-9)
(S-10)
(S-9)
(S-7)
(S-7)
(S-7)
(S-5)
[5] Power Supply CBA
Fig. D2
4-8A91F4DC
Page 21
[15] Front Cabinet
[10] Speaker
Holder(s) [L]
[9] Speaker Holder(s) [R]
(S-13)
[11] Speaker
(S-14)
(S-13)
[11] Speaker
(S-14)
[12] Junction
CBA
(S-15)
[14] Function CBA
[13] IR Sensor CBA
(S-12)
[8] LCD Module
Assembly
Fig. D3
4-9A91F4DC
Page 22
TV Cable Wiring Diagram
Jack
CBA
Inverter CBA
CN1050
Power Supply CBA
CL701B
CN302
CN301
CN101
Digital Main
CBA Unit
CL701A
CN802
To Speaker
CN602
AC CORD
CN801
Junction
CBA
CN201
CN1001
CN1900
CN1003
To LCD Module
Assembly
CN1100
CN1150
CN1200
CN3702
CN3701
CN3902
To LCD Module
Assembly
CN101
IR Sensor CBA
CL103C
4-10A91F4DC
CL102A
Function CBA
CL103B
CL101B
Fig. D4
Page 23
ELECTRICAL ADJUSTMENT INSTRUCTIONS
General Note: “CBA” is abbreviation for
“Circuit Board Assembly.”
Note: Electrical adjustments are required after
replacing circuit components and certain
mechanical parts. It is important to perform
these adjustments only after all repairs and
replacements have been completed.
Also, do not attempt these adjustments unless
the proper equipment is available.
Test Equipment Required
1. NTSC Pattern Generator (Color Bar W/White
Window, Red Color, Dot Pattern, Gray Scale,
Monoscope, Multi-Burst)
2. Remote control unit
3. Color Analyzer
How to make the Service remote
control unit:
[LC320SLX, LC320EMX]
Cut “A” portion of the attached remote control unit as
shown in Fig. 1.
service button
(There is a button under the plastic housing.)
[LC320SSX]
Cut “A” portion of the attached remote control unit as
shown in Fig. 3
service button
A
Fig. 3
How to set up the service mode:
Service mode:
1. Use the service remote control unit.
2. Turn the power on.
3. Press the service button on the service remote
control unit. The following screen appears.
"*" differs depending on the models.
Code :
***********-***
Pic code :
**-***-**-*****-***
MIPS :
Push 0key
A
[32MF339B/F7]
Cut “A” portion of the attached remote control unit as
shown in Fig. 2.
service button
(There is a button under the plastic housing.)
A
Fig. 1
Fig. 2
Tuner :
****-*****-****
safety_Non
Safety :
5-1FL9.1EA
Page 24
1. Purity Check Mode
2. VCOM Adjustment
This mode cycles through full-screen displays of red,
green, blue, and white to check for non-active pixels.
1. Enter the Service mode.
2. Each time pressing [7] button on the service
remote control unit, the display changes as
follows.
Purity Check Mode
White mode
[7] button
[7] button
Black mode
[7] button
Red mode
[7] button
Green mode
[7] button
Blue mode
Test PointAdj. Point
Screen
[CHANNEL UP/DOWN ]
buttons
M. EQ.Spec.
Color analyzerSee below
Figure
To avoid interference from ambinent
light, this adjustment should be
performed in a dark room.
Perpendicularity
L = 3 cm
Color Analyzer
1. Operate the unit for more than 20 minutes.
2. Set the color analyzer and bring the optical
receptor to the center on the LCD-Panel surface
after zero point calibration as shown above.
Note: The optical receptor must be set
perpendicularly to the LCD Panel surface.
3. Enter the Service mode.
4. Press [3] button on the service remote control unit.
5. Press [CHANNEL UP/DOWN] buttons on the
service remote control unit so that the color
analyzer value becomes minimum.
[7] button
White 20% mode
Note:
When entering this mode, the default setting is White mode.
5-2LC7NEA
Page 25
The white balance adjustment should be
performed when replacing the LCD Panel
or Digital CBA.
3. White Balance Adjustment
Purpose: To mix red, green and blue beams correctly
for pure white.
Symptom of Misadjustment: White becomes bluish
or reddish.
Test Point
Screen
Adj. PointModeInput
[VOLUME
DOWN]
button
[VIDEO1]
C/D
M. EQ.Spec.
White Raster
(APL 70%)
or
(APL 40%)
5. [CUTOFF]
Press [1] button to select “COR” for Red Cutoff
adjustment. Press [3] button to select “COB” for
Blue Cutoff adjustment.
[DRIVE]
Press [4] button to select “DR” for Red Drive
adjustment. Press [6] button to select “DB” for Blue
Drive adjustment.
6. In each color mode, press [CHANNEL UP/DOWN]
buttons to adjust the values of color.
7. Adjust Cutoff and Drive so that the color
temperature becomes 12000°K (x
=
0.272 / y
=
0.278 ±0.005).
Pattern Generator,
Color analyzer
x= 0.272 ± 0.005
y= 0.278 ± 0.005
Figure
To avoid interference from ambinent
light, this adjustment should be
performed in a dark room.
Perpendicularity
L = 3 cm
INPUT: WHITE 70%, 40%
Color Analyzer
1. Operate the unit for more than 20 minutes.
2. Input the White Raster(70%=70IRE, 40%=40IRE).
INPUT SIGNAL
0IRE0IRE
Low
Hight
Light
Light
100IRE
40%=40IRE
70%=70IRE
3. Set the color analyzer to the CHROMA mode and
bring the optical receptor to the center on the
LCD-Panel surface after zero point calibration as
shown above.
Note: The optical receptor must be set
perpendicularly to the LCD Panel surface.
4. Enter the Service mode. Press [VOLUME DOWN]
button on the service remote control unit and select
“C/D” mode.
100IRE
5-3LC7NEA
Page 26
HOW TO INITIALIZE THE LCD TV
The purpose of initialization is to place the set in a new out of box condition. The customer will be prompted to
select a language and program channels after the set has been initialized.
To put the program back at the factory-default, initialize the LCD TV using the following procedure.
1. Turn the power on.
2. To enter the service mode, press the service
button on the service remote control unit.
- To cancel the service mode, press [POWER]
button on the service remote control unit.
3. Press [INFO] button on the service remote control
unit to initialize the LCD television.
4. "INITIALIZED" will appear in the upper left of the
screen. "INITIALIZED" color will change to green
from red when initializing is complete.
6-1A91F3INT
Page 27
FIRMWARE RENEWAL MODE
Equipment Required
a. USB memory
b. Remote Control Unit
Firmware Update Procedure
Note: There are two states (the User Upgrade and
the Factory Upgrade) in firmware update.
User UpgradeUpgrade the firmware only.
The setting values are not
initialized.
Factory upgradeUpgrade the firmware and
initialize the setting values.
The identification of User Upgrade and Factory
Upgrade are done by the filename.
1. Turn the power off and unplug the AC Cord.
2. Insert the USB memory to the USB port as shown
below.
Rear Cabinet
USB Memory
The appearance shown in *1 is described as follows.
AppearanceState
Downloading...
Writing...
Downloading the firmware from
the USB memory.
Writing the downloaded firmware
in flash memory.
Checking...Checking the new firmware.
5. When the firmware update is completed, the
following will appear on the screen.
Software Upgrade
The software upgrade is completed.
Remove USB storage device, unplug and replug power code.
Unplug the AC cord and kindly remove the USB
memory from the USB port. Plug the AC cord in
the wall outlet again and turn the power on.
Note:
When the Factory Upgrade is used, after restating
TV, shift to initial screen menu in service mode.
"INITIALIZED" will appear on the upper left of the
screen. "INITIALIZED" color will change to green
from red when initializing is complete.
3. Plug the AC cord in the wall outlet and turn the
power on.
4. The update will start and the following will appear
on the screen.
Software Upgrade
Software upgrade in progress. Please wait.
Do not remove the USB device or turn the TV off
while upgrade is in progress.
*1
Downloading...
0%
Note: If the above screen isn’t displayed, repeat from
step 1.
7-1A91F3FW
Page 28
[ Power Supply Section ]
FLOW CHART NO.1
The power cannot be turned on.
TROUBLESHOOTING
Is the fuse (F601) normal?
Ye s
Is normal state restored when once unplugged
power cord is plugged again several seconds?
Ye s
Is the AL+33V line voltage normal?
Ye s
Check each rectifying circuit of the secondary
circuit and service it if defective.
FLOW CHART NO.2
The fuse blows out.
Check the presence that the primary component
is leaking or shorted and service it if defective.
After servicing, replace the fuse.
FLOW CHART NO.3
When the output voltage fluctuates.
No
No
No
See FLOW CHART No.2 <The fuse blows out.>
Check if there is any leak or short-circuiting on the
primary circuit component, and service it if defective.
(C605, D601, D602, D603, D604, Q601, Q602,
T601)
Check the presence that the rectifying diode or circuit
is shorted in each rectifying circuit of secondary side,
and service it if defective.
Does the photocoupler circuit on the
secondary side operate normally?
Ye s
Check IC601, D609, D611 and their periphery,
circuit and service it if defective.
FLOW CHART NO.4
When buzz sound can be heard in the vicinity of power circuit.
Check if there is any short-circuit on the rectifying diode and the circuit
and service it if defective. (IC631, Q207, Q209, Q210
D631, D632, D633, D638, D641, D642, D646, D647)
FLOW CHART NO.5
AL+33V is not output.
Is approximately +34V voltage supplied to the
cathode of D638?
Ye s
Check D657, R661 and their periphery circuit, and
service it if defective.
Replace Digital Main CBA Unit or LCD Module
Assembly.
No
Check the line between Pin(15, 17, 19) of CN302
and input terminals(JK731, JK732, JK733), and
service it if defective.
8-6A91F3TR
Page 34
[ Audio Signal Section ]
FLOW CHART NO.1
Audio is not outputted normally.(Audio input)
Are the audio(L/R) signals inputted to Pin(2, 15)
of IC771?
Ye s
Are the audio(L/R) signals inputted to each pin of
CN301?
Pin(6) :
Pin(8) :
Pin(2) :
Pin(4) :
Are the audio(L/R) signals inputted to the Pin(1, 44)
of IC801?
Are the audio(L/R) signals inputted to the Pin(3, 5)
of IC871?
Are the audio(L/R) signals outputted to the Pin(1, 2)
of CN801 and CN802?
Are the audio(L/R) signals outputted to the audio
output terminal?
AMP(L)-OUT
AMP(R)-OUT
AUDIO(L)-OUT
AUDIO(R)-OUT
Ye s
Ye s
CN802: SP(L)
CN801: SP(R)
JK871: AUDIO(L)-OUT
JK872: AUDIO(R)-OUT
No
No
No
No
No
Ye s
No
Check the line between Pin(2, 15) of IC771 and
input terminal(JK753, JK754), and service it if
defective.
Replace Digital Main CBA Unit.
Check the line between Pin(6, 8) of CN301 and
Pin(1, 44) of IC801, and service it if defective.
Check the line between Pin(2, 4) of CN301 and
Pin(3, 5) of IC871, and service it if defective.
Check IC801 and their periphery circuit, and
service it if defective.
Check SP801,SP802 and their periphery circuit,
and service it if defective.
Check the line between Pin(1, 7) of IC871 and audio
output terminal(JK871, JK872), and service it if
defective.
8-7A91F3TR
Page 35
FLOW CHART NO.2
Audio is not outputted normally.(Component Audio input)
Are the audio(L/R) signals inputted to the Pin(4, 11)
of IC771?
Ye s
Are the audio(L/R) signals inputted to each pin of
CN301?
Pin(6) :
Pin(8) :
Pin(2) :
Pin(4) :
AMP(L)-OUT
AMP(R)-OUT
AUDIO(L)-OUT
AUDIO(R)-OUT
Ye s
Are the audio(L/R) signals inputted to the Pin
(1, 44)
of IC801?
Are the audio(L/R) signals inputted to the Pin
(3, 5)
of IC871?
Ye s
Are the audio(L/R) signals outputted to the Pin(1, 2)
of CN801 and CN802?
CN802: SP(L)
CN801: SP(R)
Are the audio(L/R) signals outputted to the audio
output terminal?
JK871: AUDIO(L)-OUT
JK872: AUDIO(R)-OUT
No
No
No
No
No
Ye s
No
Check the line between Pin(4, 11) of IC771 and
input terminal(JK741, JK742), and service it if
defective.
Replace Digital Main CBA Unit.
Check the line between Pin(6, 8) of CN301 and
Pin(1, 44) of IC801, and service it if defective.
Check the line between Pin(2, 4) of CN301 and
Pin(3, 5) of IC871, and service it if def
ective.
Check IC801 and their periphery circuit, and
service it if defective.
Check SP801,SP802 and their periphery circuit,
and service it if defective.
Check the line between Pin(1, 7) of IC871 and audio
output terminal(JK871, JK872), and service it if
defective.
8-8A91F3TR
Page 36
FLOW CHART NO.3
Audio is not outputted normally.(Tuner input)
Are the DIF signals outputted to the Pin(26, 28)
of CN302?
Ye s
Are the audio(L/R) signals inputted to each pin of
CN301?
Pin(6) :
Pin(8) :
Pin(2) :
Pin(4) :
AMP(L)-OUT
AMP(R)-OUT
AUDIO(L)-OUT
AUDIO(R)-OUT
Ye s
Are the audio(L/R) signals inputted to the Pin
(1, 44)
of IC801?
Are the audio(L/R) signals inputted to the Pin
(3, 5)
of IC871?
Ye s
Are the audio(L/R) signals outputted to the Pin(1, 2)
of CN801 and CN802?
CN802: SP(L)
CN801: SP(R)
Are the audio(L/R) signals outputted to the audio
output terminal?
JK871: AUDIO(L)-OUT
JK872: AUDIO(R)-OUT
No
No
No
No
No
Ye s
No
Check TU301 and their periphery circuit, and
service it if defective.
Replace Digital Main CBA Unit.
Check the line between Pin(6, 8) of CN301 and
Pin(1, 44) of IC801, and service it if defective.
Check the line between Pin(2, 4) of CN301 and
Pin(3, 5) of IC871, and service it if def
ective.
Check IC801 and their periphery circuit, and
service it if defective.
Check SP801,SP802 and their periphery circuit,
and service it if defective.
Check the line between Pin(1, 7) of IC871 and audio
output terminal(JK871, JK872), and service it if
defective.
8-9A91F3TR
Page 37
BLOCK DIAGRAMS
System Control Block Diagram
AL+3.3V
D104
D105
STANDBY
POWER
SENSOR
REMOTE
RS102
JUNCTION
CBA
CL101B
LED144
REMOTE22
P-ON-H155
KEY-IN166
CL102A
CN101
LED144
REMOTE22
P-ON-H155
KEY-IN166
CN101
Q172
Q171
CN302CN3702
IR SENSOR CBAFUNCTION CBA
CL103C
KEY-IN133
CL103B
KEY SWITCH
CN301
TO
POWER SUPPLY
P-ON-H2
P-ON-H1
CN301CN3701
BLOCK DIAGRAM
PROTECT2
PROTECT1
11
15
CN201
5
TO
INVERTER
BLOCK
DIAGRAM
(CN1001)
PROTECT35BACKLIGHT-SW4BACKLIGHT-ADJ14VCOM
6
DRIVE
IC201,Q203,
29
28
26
Q204,Q205
TU301 (TUNER UNIT)
SCL
4
22
SDA
5
POWER SUPPLY CBA
21
IC3301
(MAIN MICRO CONTROLLER)
KEY-IN12929
AC5
KEY-IN1
P-ON-H199
REMOTE2525
LED12727
P-ON-H211
CN3701
F1
R22
R23
AB13
LED1
P-ON-H2
P-ON-H1
REMOTE
INPUT0
E1
INPUT0
INPUT1
TO AUDI O
AUDIO-MUTE
INPUT1
E2
AB9
AUDIO-MUTE
BLOCK
DIAGRAM
PROTECT1
PROTECT2
11
15
AD4
AD5
PROTECT2
PROTECT1
VCOM-PWM
PROTECT3
5
29
AE5
AC14
PROTECT3
VCOM-PWM
BACKLIGHT-SW
26
AB16
BACKLIGHT-SW
BACKLIGHT-ADJ
28
AB23
BACKLIGHT-ADJ
SCL
22
CN3702CN302
AC18
SCL
SDA
21
AC19
SDA
CLKOUT
E11
3
WP
X3101
CLKIN
N1
N2
25MHz
OSC
DIGITAL MAIN CBA UNIT
SCK
SIN
SOUTCSWP
AB25
AB24
AC25
AC24
652
1
SI
CS
SO
SCK
IC3101 (MEMORY)
9-1
A91F3BLS
Page 38
Video Block Diagram
AUDIO SIGNAL
TO DIGITAL
SIGNAL PROCESS
BLOCK DIAGRAM
VIDEO SIGNAL
VIDEO-IN
S-VIDEO-SW
S-VIDEO-Y-IN
CN302CN3702
WF1WF2
WF3
S-VIDEO-C-IN
VIDEO-IN44
S-VIDEO-C-IN66
COM-VIDEO-Pr-IN
COM-VIDEO-Y-IN
COM-VIDEO-Pb-IN
S-VIDEO-Y-IN88
COM-VIDEO-Y-IN
COM-VIDEO-Pb-IN
S-VIDEO-SW55
1515
1717
COM-VIDEO-Pr-IN
1919
WF6
WF4 WF5
DIF-OUT1
DIF-OUT2
DIF-OUT12626
CN302CN3702
IF-AGC
DIGITAL MAIN CBA UNIT
IF-AGC2424
DIF-OUT22828
3
22
CL701A
VIDEO-IN5
S-VIDEO-C-IN
S-VIDEO-Y-IN 1
S-VIDEO-SW-IN
531
CL701B
CY
JACK CBA
JK752
VIDEO-IN
JK751
S-VIDEO
-IN
COMPONENT
-Y-IN
JK731
JK732
POWER SUPPLY CBA
9
11
10
IF-AGC
DIF-OUT1
DIF-OUT2
TU301
COMPONENT
-Pb-IN
COMPONENT
-Pr-IN
JK733
(TUNER UNIT)
9-2A91F3BLV
Page 39
Audio Block Diagram
AUDIO SIGNAL
TO
DIGITAL
AUDIO(L)
SIGNAL
PROCESS
BLOCK
AUDIO(R)
DIAGRAM
TO
SYSTEM
INPUT0
INPUT1
CONTROL
BLOCK
DIAGRAM
AUDIO-MUTE
IC3802
(D/A CONVERTER)
BCLK
LRCLK
ADATA1
[ LC320SLX, LC320EMX ]
876
D/A
CONVERTER
(L-CH)
(R-CH)
15
14
TO
DIGITAL
SIGNAL
PROCESS
BLOCK
DIAGRAM
ACLK
ADATA0
4
3
39
DSP
(AUDIO DSP)
IC3803
3334373635
IC3801
(D/A CONVERTER)
876
D/A
(L-CH)
15
CONVERTER
(R-CH)
14
5
40
5
SPDIF
2
[ 32MF339B/F7, LC320SSX ]
CL701A
AUDIO(L)-IN77
CL701B
IC771
9
AUDIO(R)-IN
9
(AUDIO SELECTOR)
241
DRIVE
Q873,Q874
MUTE
Q872
MUTE
22
CN3702
SPDIF
CN302
BUFFER
2020
AUDIO-MUTE
IC801 (AUDIO AMP)
Q841
1
PWM1
DRIVE1
9,10
13,14
44
PWM2
DRIVE2
35,36
31,32
CN801CL801
20
MUTE CONTROL
1
2
SP(L)-
SP(L)+
Q801
2
CN802
SP(R)+
POWER SUPPLY CBADIGITAL MAIN CBA UNIT
1
SP(R)-
CN3702CN302
WF7
3
13
5
151112
14
CN3702CN302
AUDIO(L)1313
AUDIO(R)1111
INPUT11010
INPUT01212
Q772
Q771
109
CONTROL
LOGIC
CN3701CN301
AUDIO(R)-OUT44
AMP(R)-OUT88
AUDIO(L)-OUT22
AMP(L)-OUT66
5
IC871
(OP AMP)
7
13
Q871
JACK CBA
COMPONENT-
AUDIO(L)
JK753
-IN
AUDIO(R)
-IN
JK754
JK741
AUDIO(L)-IN
COMPONENT-
JK742
AUDIO(R)-IN
HDMI-
JK721
AUDIO(L)-IN
HDMI-
JK722
AUDIO(R)-IN
9-3
AUDIO(L)-OUT
JK871
AUDIO(R)-OUT
JK872
DIGITAL
JK841
AUDIO-OUT
(COAXIAL)
SP801
SPEAKER
L-CH
CL802
SP802
SPEAKER
R-CH
A91F3BLA
Page 40
Digital Signal Process Block Diagram
LCD MODULE
ASSEMBLY
LLV1P21
LLV1N20
LLV0P23
LLV0N22
LLV2P19
LLV2N18
LLV3P13
LLV3N12
LLV4P11
LLV4N10
LLV5P9
LLV5N8
LLVCLKP16
LLVCLKN15
TP6
POL5
CPV4
OE3
STV1
CN3902
AUDIO SIGNAL
48474645444338373635343342416364303132
VIDEO SIGNAL
IC3901 (TINING CONTROLLER)
IC3301 (DIGITAL SIGNAL PROCESS)
AA3
LVD S
OUTPUT
DATA
INPUT
LATCH
FRC
LINE BUFFER
GAMMA
CORRECTOR
DATA
PROCESSING
IC3201
DATA(0-15)
H1,H3,H7,H9
B1,B9,C2,C8,
F1,F9,G2,G8,
M2,M3,M7,M8,
D1,D3,D7,D9,
A13-15,A18,
A21-23,B13-15,
B17,B19-23
C15,C17-19,
VIDEO
DECODER
B1
ADDESS(0-12)
N2,N3,N7,N8,
P2,P3,P7,P8,R2
C23,C24,D14,
D15,D17-19,
D22,D23
B2
C1C2D1
D2
A1A2A3
B3
B4A4B6A6A7
(DDR2 SDRAM)
B7
LVD S
RX
8
7109
1211161514
AF23
AF22
AE23
AD23
AD24
LVD S
TX
AUDIO I/F
A/D
CONVERTER
DEMODULATOR
SW
V1
V3
U2
U1
U3
/MPEG DECODER
S-VIDEO-SW
IF-AGC
C6
AF7
AF2
AE2
A9
M1
AD9
AD12
AD10
AD11
B9
AC10
AD14
AE22
C8
AD21
AUDI O
C9
AF24
AD22
DIGITAL
SIGNAL
DECODER
B8
A8
13
AE24
PROCESS
B10
A10
A11
B11
HDMI
I/F
A5
B5
C4
C5
S-VIDEO-SWM2AUDIO(R)
DIF-OUT1
DIF-OUT2
VIDEO-IN
S-VIDEO-Y-IN
S-VIDEO-C-IN
COM-VIDEO-Y-IN
COM-VIDEO-Pr-IN
COM-VIDEO-Pb-IN
IF-AGC
DIGITAL MAIN CBA UNIT
TO VIDEO
BLOCK DIAGRAM
TO VIDEO
BLOCK DIAGRAM
AUDIO(L)
BCLK
ACLK
LRCLK
TO AUDI O
BLOCK DIAGRAM
SPDIF
ADATA1
ADATA0
TMDS-D0(+)
TMDS-D0(-)
TMDS-D1(+)
TMDS-D1(-)
TMDS-D2(+)
TMDS-D2(-)
SDA
SCL
TMDS-D0(+)
TMDS-D0(-)
TMDS-D1(+)
TMDS-D1(-)
TMDS-D2(+)
TMDS-D2(-)
TMDS-CLOCK(+)
TMDS-CLOCK(-)
SDA
SCL
TMDS-D0(+)
TMDS-D0(-)
TMDS-D1(+)
TMDS-D1(-)
TMDS-D2(+)
TMDS-D2(-)
TMDS-CLOCK(+)
TMDS-CLOCK(-)
SDA
JK3701
79461
9-4
TMDS-CLOCK(+)
TMDS-CLOCK(-)
3
101216
HDMI-IN1
JK3702
79461
15
3
101216
HDMI-IN2
JK3703
79461
15
HDMI-IN3
SCL
3
101216
15
A91F3BLD
Page 41
Inverter Block Diagram
BACK
LIGHT
1
2
CN1050
786
CN1100
5
BACK
LIGHT
1
2
786
BACK
LIGHT
1
2
CN1150
786
5
5
BACK
1
CN1200
LIGHT
2
786
LCD MODULE
Q1061
ASSEMBLY
OVER VOLTAGE
PROTECTOR
VCOM
10
CN1003
OVER VOLTAGE
OVER VOLTAGE
PROTECTOR
OVER VOLTAGE
Q1161
Q1211
5
PROTECTOR
PROTECTOR
Q1111
T1050
2
INV+16V
4
1
SW+16V
Q1801,Q1802,
Q1803,Q1804
SW+16V
Q1800,Q1815
3
IC1000
(PWM CONTROL)
T1100
VCC
12
4
2
DCT
4
Q1004,
Q1005
3
SW
1
Q1500
Q1501,
Q1502,
3
CURRENT
CONTROL
SWITCH
DRIVE
Q1503
11
15
16
Q1550
Q1551,
PWM
CONTROL
T1150
CURRENT
Q1552,
Q1553
LOGIC
2
2
CONTROL
SWITCH
DRIVE
8
1
4
1
OSC
T1200
3
4
3
1
2
Q1003
Q1001
5 6
Q1972
Q1210
OVER VOLTAGE
PROTECTOR
Q1160
IC1700
(COMPARATOR)
Q1600
OVER VOLTAGE
13
PROTECTOR
12
14
Q1621
Q1110
9
8
OVER VOLTAGE
10
PROTECTOR
Q1060
67523
OVER VOLTAGE
PROTECTOR
1
10
11
14
15
23457
T1950
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
HOT CIRCUIT. BE CAREFUL.
CN1900
ACL2
HOT-GND1
TO POWER
SUPPLY
BLOCK
DIAGRAM
(CN602)
8
Q1930
14
IC1930
SWITCHING
32
Q1932
Q1970
IC1931
14
Q1931
32
Q1971
INVERTER CBA
COLD
HOT
9-5
CN1001
PROTECT3
10
TO SYSTEM
BACKLIGHT-ADJ
VCOM
BACKLIGHT-SW
2
12
11
CONTROL
BLOCK
DIAGRAM
(CN201)
A91F3BLINV
Page 42
Power Supply Block Diagram
LCD+16V
LCD+6.8V
INV+16V
VGH
P-ON+3.3V
P-ON+3V
P-ON+7V
AL+3.3V
P-ON+3.3V
P-ON+5V
AL+33V
P-ON+9V
P-ON+5V
AL+13V
AL+3.3V
TUNER+5V
TO SYSTEM
CONTROL
P-ON-H1
P-ON-H2
BLOCK
DIAGRAM
PROTECT2
PROTECT1
INVERTER CBA
DIGITAL MAIN CBA UNIT
2
13
10
8,9
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
LCD-6.8V13
INV+16V2
VGH10
LCD+16V8,9
CN201CN1001
SW-6.8V
Q211
SW
Q201,Q202,
Q212
For continued protection against risk of fire,
replace only with same type 4 A, 125V fuse.
CAUTION ! :
ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.
SW+24.5V
Q210
10
12
P-ON+3.3V12
P-ON+3V10
CN301CN3701
16
19,20
21,22
P-ON+7V16
P-ON+3.3V19,20
AL+3.3V21,22
SWITCHING
Q207,Q208
13,14
P-ON+5V13,14
Q401
Q501
Q209,D204
SW+16V
SW+16V
Q642
SW+9V
SW+3.3V
Q637,D666
SWITCHING
Q638,Q639
Q640
SW+5V
Q634
SW+5V
Q641,643
IC631
Q635
23
REG.
+3.3V
+5V REG.
4A/125V
11
3
T601
BRIDGE
RECTIFIER
D601- D604
LINE
FILTER
L602
LINE
FILTER
L601
F601
4A/125V
HOT CIRCUIT. BE CAREFUL.
AC601
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F601) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
AC CORD
14
4A/125V
12
4
CN602
TO
INVERTER
ACL2
HOT-GND1
BLOCK
DIAGRAM
17
(CN1900)
FEED
18
13
16
15
19
14
5
7
9
8
IC601
BACK
Q631
32
HOTCOLD
CONTROL
Q602
SWITCHING
POWER SUPPLY CBA
SWITCHING
Q601
9-6
A91F3BLP
Page 43
SCHEMATIC DIAGRAMS / CBA AND TEST POINTS
Standard Notes
WARNING
Many electrical and mechanical parts in this chassis
have special characteristics. These characteristics
often pass unnoticed and the protection afforded by
them cannot necessarily be obtained by using
replacement components rated for higher voltage,
wattage, etc. Replacement parts that have these
special safety characteristics are identified in this
manual and its supplements; electrical components
having such features are identified by the mark “#” in
the schematic diagram and the parts list. Before
replacing any of these components, read the parts list
in this manual carefully. The use of substitute
replacement parts that do not have the same safety
characteristics as specified in the parts list may create
shock, fire, or other hazards.
Notes:
1. Do not use the part number shown on these
drawings for ordering. The correct part number is
shown in the parts list, and may be slightly
different or amended since these drawings were
prepared.
2. All resistance values are indicated in ohms
(K = 10
3. Resistor wattages are 1/4W or 1/6W unless
otherwise specified.
4. All capacitance values are indicated in µF
(P = 10
5. All voltages are DC voltages unless otherwise
specified.
6. This schematic diagrams are masterized version
that should cover the entire FL9.1 chassis models.
Thus some parts in detail illustrated on this
schematic diagrams may vary depend on the
model within the FL9.1 chassis.
Please refer to the parts lists for each models.
7. The Circuit Board layout illustrated on this service
manual is the latest version for this chassis at the
moment of making this service manual.
Depend on the mass production date of each
model, the actual layout of each Board may differ
slightly from this version.
3
, M = 106).
-6
µF).
10-1FL9_1_SC
Page 44
LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON
r
THE FOLLOWING PAGES:
1. CAUTION:
CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME
TYPE_A,_V FUSE.
ATTENTION: UTILISER UN FUSIBLE DE RECHANGE DE MÊME TYPE DE_A,_V.
2. CAUTION:
Fixed Voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F601) is blown, first check to see that all components in the power supply circuit are not
defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components
in the power supply circuit to fail.
3. Note:
1. Do not use the part number shown on the drawings for ordering. The correct part number is shown in the
parts list, and may be slightly different or amended since the drawings were prepared.
2. To maintain original function and reliability of repaired units, use only original replacement parts which are
listed with their part numbers in the parts list section of the service manual.
4. Voltage indications on the schematics are as shown below:
Plug the TV power cord into a standard AC outlet.:
2
(Unit: Volt)
1
5.05.0
3
Power on mode
5. How to read converged lines
1-D3
Distinction Area
Line Number
(1 to 3 digits)
Examples:
1. "1-D3" means that line number "1" goes to the line numbe
"1" of the area "D3".
2. "1-B1" means that line number "1" goes to the line number
"1" of the area "B1".
6. Test Point Information
: Indicates a test point with a jumper wire across a hole in the PCB.
: Used to indicate a test point with a component lead on foil side.
: Used to indicate a test point with no test pin.
: Used to indicate a test point with a test pin.
Voltage
Indicates that the voltage
is not consistent here.
3
2
1
AREA D3
1-B1
AREA B1
1-D3
ABCD
10-2FL9_1_SC
Page 45
10-3
A91F3SCM1
Power Supply 1/4 Schematic Diagram
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F601) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
For continued protection against risk of fire,
replace only with same type 4 A, 125V fuse.
CAUTION ! :
ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.
4A/125V
Page 46
10-4
A91F3SCM2
Power Supply 2/4 Schematic Diagram
Page 47
10-5
A91F3SCM3
Power Supply 3/4 & Jack Schematic Diagram
Page 48
10-6
A91F3SCM4
Power Supply 4/4 Schematic Diagram
Page 49
10-7
A91F3SCINV
Inverter Schematic Diagram
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
Page 50
10-8
A91F3SCF
Function Schematic Diagram
Page 51
10-9
A91F3SCIR
IR Sensor & Junction Schematic Diagram
Page 52
10-10
A91F3SCD1
Digital Main 1/5 Schematic Diagram
The order of pins shown in this diagram is different from that of actual IC3301.
IC3301 is divided into seven and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
1 NOTE:
Page 53
10-11
A91F3SCD2
Digital Main 2/5 Schematic Diagram
The order of pins shown in this diagram is different from that of actual IC3301.
IC3301 is divided into seven and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
1 NOTE:
Page 54
10-12
Digital Main 3/5 Schematic Diagram
A91F3SCD3
The order of pins shown in this diagram is different from that of actual IC3301.
IC3301 is divided into seven and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
1 NOTE:
Page 55
10-13
Digital Main 4/5 Schematic Diagram
A91F3SCD4
The order of pins shown in this diagram is different from that of actual IC3301.
IC3301 is divided into seven and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
1 NOTE:
Page 56
10-14
Digital Main 5/5 Schematic Diagram
A91F3SCD5
The order of pins shown in this diagram is different from that of actual IC3301.
IC3301 is divided into seven and shown as IC3301 (1/5) ~ IC3301 (5/5) in this Digital Main Schematic Diagram Section.
1 NOTE:
Page 57
10-15
BA94F0F01022-A
Power Supply CBA Top View
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
Because a hot chassis ground is present in the power
supply circuit, an isolation transformer must be used.
Also, in order to have the ability to increase the input
slowly,when troubleshooting this type power supply
circuit, a variable isolation transformer is required.
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F601) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
For continued protection against risk of fire,
replace only with same type 4 A, 125V fuse.
CAUTION ! :
ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.
4A/125V
Page 58
10-16
PIN 19 OF
CN302
WF6
PIN 8 OF
CN302
WF2
PIN 15 OF
CN302
WF4
PIN 17 OF
CN302
WF5
PIN 6 OF
CN302
WF3
PIN 13 OF
CN302
WF7
PIN 4 OF
CN302
WF1
Power Supply CBA Bottom View
BA94F0F01022-A
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
Because a hot chassis ground is present in the power
supply circuit, an isolation transformer must be used.
Also, in order to have the ability to increase the input
slowly,when troubleshooting this type power supply
circuit, a variable isolation transformer is required.
For continued protection against risk of fire,
replace only with same type 4 A, 125V fuse.
CAUTION ! :
ATTENTION : Utiliser un fusible de rechange de même type de 4A, 125V.
4A/125V
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F601) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
Page 59
10-17
BA94F0F01032-A
Inverter CBA Top View
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
Because a hot chassis ground is present in the power
supply circuit, an isolation transformer must be used.
Also, in order to have the ability to increase the input
slowly,when troubleshooting this type power supply
circuit, a variable isolation transformer is required.
Page 60
10-18
BA94F0F01032-A
Inverter CBA Bottom View
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
Because a hot chassis ground is present in the power
supply circuit, an isolation transformer must be used.
Also, in order to have the ability to increase the input
slowly,when troubleshooting this type power supply
circuit, a variable isolation transformer is required.
Page 61
10-19
BA94F0F01032-B
BA94F0F01032
Function CBA Top View
Function CBA Bottom View
Junction CBA
Top View
Junction CBA
Bottom View
Page 62
10-20
BA94F0F01022-B
Jack CBA Top View
Jack CBA Bottom View
BA94F0F01032-C
IR Sensor CBA Bottom View
IR Sensor CBA Top View
Page 63
WAVEFORMS
WF1 ~ WF7 = Waveforms to be observed at
Waveform check points.
(Shown in Schematic Diagram.)
Input: NTSC Color Bar Signal (with 1kHz Audio Signal)
WF1
WF2
Pin 4 of CN302
CVBS0.2V20µs
Pin 8 of CN302
S-VIDEO-Y0.2V
20µs
WF5
WF6
Pin 17 of CN302
VIDEO-Pb 0.2V20µs
Pin 19 of CN302
VIDEO-Pr0.2V20µs
WF3
WF4
Pin 6 of CN302
S-VIDEO-C0.2V
Pin 15 of CN302
VIDEO-Y0.2V20µs
20µs
Pin 13 of CN302
WF7
AUDIO0.1V0.5ms
LC7NWF11-1
Page 64
CN3902
BACK
1
CN1050
2
1
STV
XAO
LIGHT
2
CN1900
3
OE1
22
4
POL
CPV
CN1100
CN1001
BACK
1
151
HDMI-
CONNECTOR-1
8
7
6TP5
GND
LLV5(-)
LIGHT
2
142
133
124
9
10
LLV4(-)
LLV5(+)
CN1150
115
WIRING DIAGRAM
HDMI-
CONNECTOR-2
12
11
LLV3(-)
LLV4(+)
BACK
LIGHT
2
1
106
13
LLV3(+)
15
14
GND
LLVCLK(-)
CN1200
610
16
LLVCLK(+)
BACK
1
511
LIGHT
2
412
HDMI-
CONNECTOR-3
19
18
17
GND
LLV2(-)
LLN2(+)
GND
1
CN1003
313
214
115
21
20
LLV1(-)
LLV1(+)
LCD+16V
2
22
LLV0(-)
23
LLV0(+)
24
GND
P-ON+3.3V
GND4VGH3LCD+16V
6
5
GND8LCD-6.8V
P-ON+3.3V
9
7
LCD MODULE
ASSEMBLY
GND10VCOM
11
INVERTER CBA
VIDEO-IN
CL701B
1
2
AUDIO(L)
-IN
JACK CBA
3
4
5
AUDIO(R)
-IN
6
S-VIDEO
-IN
8
9
CL101B
1
GND
1
CL102A
CN101CL101
1
2
REMOTE
2
2
CL103BCL103C
CL103
3
4
AL+3.3V
LED1
3
4
3
4
2
1
GND
AL+3.3V
2
1
5
6
P-ON-H1
KEY-IN1
5
6
5
6
3
KEY-IN1
3
7
NU
7
7
4
NU
4
8
NU
8
JUNCTION CBAIR SENSOR CBAFUNCTION CBA
8
DIGITAL MAIN CBA UNIT
CN3701CN301
S-VIDEO-Y-IN
S-VIDEO-C-IN
S-VIDEO-SW
GND
VIDEO-IN77AUDIO(L)-IN
GND
GND
AUDIO(R)-IN
5
6
8
9
CN602
HOT-GND11ACL
GND
INV+16V
GND
BACKLIGHT-ADJ
BACKLIGHT-SW
PROTECT397GND88LCD+16V79LCD+16V
VGH
GND
P-ON+3.3V
LCD-6.8V
VCOM
GND
CN201
CL701ACL701
1
3
2
4
POWER SUPPLY CBA
TU301 TUNER UNIT
2
6
8
9
7
513
4
CN303CN4001
GND
KEY-IN2
DVD-LED
P-ON-H3(NU)
DVD-MAIN-PWR
DVD-P-ON
DVD-REMOTE
DVD-SDATA
DVD-DISC-IN
1
5
3
2
4
2
6
8
9
7
513
4
15
172220
18
16
141012
13
11
GND
9
7
6
8
10
231921
24
25
11
DVD-CS
11
26
GND
12
27
141012
13
DVD-SCLK
GND
13
14
28
29
15
172220
18
16
DVD-DISC-OUT
LED-CONT
GND
DVD-Pr
15
18
16
17
2
CN3702CN302
GND
DVD-Pb
192321
20
513
4
GND
6
231921
24
25
26
27
28
29
DVD -Y
GND
DVD-AUDIO(L)
DVD-AUDIO-MUTE
DVD-AUDIO(R)
GND
DVD-SPDIF
22
24
8
9
7
GND
25
26
27
28
29
15
172220
18
16
141012
13
11
GND
AL+3.3V
REMOTE
LED1
P-ON-H1
KEY-IN1
NU
1
3
2
CN101
SP801
SPEAKER
L-CH
CL801
1
2
SP(L)-
CN801
SP(L)+
231921
24
25
26
27
28
NU
4
5
6
7
8
SP802
SPEAKER
R-CH
CL802
1
2
SP(R)-
CN802
SP(R)+
29
P-ON-H2
AUDIO(L)-OUT
GND
AUDIO(R)-OUT
PROTECT3
AMP(L)-OUT
GND
AMP(R)-OUT
P-ON-H1
P-ON+3V
PROTECT1
GND
P-ON+5V
P-ON+5V
PROTECT2
1
2
COMPONENT
3
-Y-IN
5
4
COMPONENT
6
-Pb-IN
7
9
8
10
COMPONENT
-Pr-IN
11
COMPONENT-
12
13
14
AUDIO(L)-IN
COMPONENT-
P-ON+7V
15
16
AUDIO(R)-IN
GND
GND
18
17
HDMI-
AUDIO(L)-IN
P-ON+3.3V
P-ON+3.3V
AL+3.3V
192321
20
HDMI-
AUDIO(R)-IN
AL+3.3V
GND
22
DIGITAL
OE2
REMOTE
BACKLIGHT-SW
24
25
26
AUDIO(L)
AUDIO-OUT
(COAXIAL)
LED1
27
-OUT
BACKLIGHT-ADJ
VCOM-PWM
28
29
AUDIO(R)
-OUT
GND
1
SPDIF
GND
3
2
VIDEO-IN
S-VIDEO-SW
S-VIDEO-C-IN
6
5
4
GND
7
S-VIDEO-Y-IN
GND
INPUT1
AUDIO(R)
INPUT0
AUDIO(L)
GND
COM-VIDEO-Y-IN
GND
COM-VIDEO-Pb-IN
GND
COM-VIDEO-Pr-IN
AUDIO-MUTE
SDA
SCL
RESET
IF-AGC
GND
DIF-OUT1
GND
DIF-OUT2
9
8
12
13
15
192321
10
14
AC601
AC CORD
16
17
11
22
18
20
24
KEY-IN1
25
26
27
28
29
A91F3WI12-1
Page 65
13-1A91F3CEX
EXPLODED VIEWS
Cabinet [LC320SLX, 32MF339B/F7, LC320SSX]
A1
A15
A10
A5
L1
L1
L1
L6
L6
L8
L2
L8
See Electrical Parts List
for parts with this mark.
Digital Main CBA Unit
Inverter CBA
AC601
B9
L6
L8
IR Sensor CBA
Function CBA
CL802
CL801
SP801
SP802
Power Supply CBA
B15
A8
A2
A13
Stand Assembly
L8
Jack CBA
L6
B27
L2
L7
L1
L1
L9
L3
L3
B14
B13
B13
B11
B12
S5
L8
L2
L2
L2
A6
LCD1
CL3902
CL1003
B1
L8
L8
B4
L2
L2
L2
B15
B8
L2
L1
L8
L6
Junction CBA
CL101
CL103
B15
B15
A11
B5
L3
L3
CL3701
CL3702
CL701
CL201
[ A ]
[ B, C ]
Comparison Chart of Models and Marks
ModelMark
LC320SLX
32MF339B/F7
LC320SSX
A
B
C
A12
Page 66
13-2A91F4CEX
Cabinet [LC320EMX]
A1
A10
L1
L1
L1
L6
L6
L8
L1
L1
L1
L8
See Electrical Parts List
for parts with this mark.
Digital Main CBA Unit
Inverter CBA
AC601
B9
B9
B8
B8
L6
L8
IR Sensor CBA
Function CBA
CL802
CL801
SP801
SP802
Power Supply CBA
A15
A2
A3
A13
Stand Assembly
L8
Jack CBA
L6
B27
L2
L7
L1
L1
L9
L3
L3
B14
B13
B13
B11
B12
S5
L8
L2
L2
L2
A6
LCD1
CL3902
CL1003
B1
L8
L8
B4
L2
L2
B15
B15
A4
L1
L8
L6
Junction CBA
CL101
CL103
B15
B15
A11
B5
L3
L3
CL3701
CL3702
CL701
CL201
L1
Page 67
Packing [LC320SLX, 32MF339B/F7, LC320SSX]
Some Ref. Numbers are
not in sequence.
Stand
Assembly
S5
X2
Tape
X8X6X10
X1
S5
S9
S3
S2
Packing Tape
S6
S2
S3
Packing Tape
S4
FRONT
Tape
L9
Packing Tape
S5
X3
S3
X4
S1
FRONT
S1
13-3A91F3PEX
Page 68
Packing [LC320EMX]
Some Ref. Numbers are
not in sequence.
Stand
Assembly
S5
X2
Tape
X8X6X10
X1
S5
L9
X7
S3
Packing Tape
S2
S6
S2
Packing Tape
S4
X3
FRONT
Tape
S3
X4
Packing Tape
FRONT
S1
S5
13-4A91F4PEX
Page 69
MECHANICAL PARTS LIST [ LC320SLX ]
PRODUCT SAFETY NOTE: Products marked with a
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTE: Parts that are not assigned part numbers
(---------) are not available.
S1CARTON A91F3UH1EM428077
S2STYROFOAM TOP A91F0UH1EM023566
S3STYROFOAM BOTTOM A91F0UH1EM023567
S4SET BAG (900X850) A8AFFUH1EM324904
S5SERIAL NO. LABEL TD812HC---------S6STAND BAG A94F0UH1EM428757
S9STAND HOLD PAD A94F1UH1EM023746
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTE: Parts that are not assigned part numbers
(---------) are not available.
S1CARTON A91F0UH1EM428117
S2STYROFOAM TOP A91F0UH1EM023566
S3STYROFOAM BOTTOM A91F0UH1EM023567
S4SET BAG (900X850) A8AFFUH1EM324904
S5SERIAL NO. LABEL TD812HC---------S6STAND BAG A94F0UH1EM428757
S9STAND HOLD PAD A94F0UH1EM023745
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTE: Parts that are not assigned part numbers
(---------) are not available.
S1CARTON A91F1UH1EM428119
S2STYROFOAM TOP A91F0UH1EM023566
S3STYROFOAM BOTTOM A91F0UH1EM023567
S4SET BAG (900X850) A8AFFUH1EM324904
S5SERIAL NO. LABEL TD812HC---------S6STAND BAG A94F0UH1EM428757
S9STAND HOLD PAD A94F1UH1EM023746
ACCESSORIES
X1BAG POLYETHYLENE 235X365XT0.030EM408420A
X2#OWNERS MANUAL A91F1UH1EMN24340
X3REMOTE CONTROL NF015UD 170/
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTE: Parts that are not assigned part numbers
(---------) are not available.
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTES:
1. Parts that are not assigned part numbers (---------)
are not available.
2. Tolerance of Capacitors and Resistors are noted
with the following symbols.
C.....±0.25%D.....±0.5%F.....±1%
G.....±2%J......±5%K.....±10%
M.....±20%N.....±30%Z.....+80/-20%
DIGITAL MAIN CBA UNIT
Ref. No.DescriptionPart No.
DIGITAL MAIN CBA UNIT1ESA19845
MPW CBA
Ref. No.DescriptionPart No.
MPW CBA
Consists of the following:
POWER SUPPLY CBA(MPW-1)
JACK CBA(MPW-2)
POWER SUPPLY CBA(MPW-1)
Ref. No.DescriptionPart No.
POWER SUPPLY CBA(MPW-1)
Consists of the following:
CAPACITORS
C201CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C202CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C203CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C204ELECTROLYTIC CAP. 2.2µF/50V MCE1JMASDL2R2
C207CHIP CERAMIC CAP.(1608) B K 0.1µF/16VCHD1CK30B104
C210ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C216CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C217CHIP CERAMIC CAP.(1608) B K 0.1µF/16VCHD1CK30B104
C218CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C219ELECTROLYTIC CAP. 47µF/25V MCE1EMASDL470
C221CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C222ELECTROLYTIC CAP. 470µF/25V MCE1EMASDL471
C223ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C224ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C302CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C303ELECTROLYTIC CAP. 330µF/10V MCE1AMASDL331
C305CHIP CERAMIC CAP.(1608) F Z 0.1µF/50VCHD1JZ30F104
C306ELECTROLYTIC CAP. 1µF/50V MCE1JMASDL1R0
C309CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C310CHIP CERAMIC CAP.(1608) CH J 47pF/50VCHD1JJ3CH470
C311CHIP CERAMIC CAP.(1608) CH J 47pF/50VCHD1JJ3CH470
C501ELECTROLYTIC CAP. 100µF/25V MCE1EMASDL101
C601#METALIZED FILM CAP. 0.47µF/250VCT2E474MS037
1ESA19752
----------
----------
----------
Ref. No.DescriptionPart No.
C602#METALIZED FILM CAP. 0.47µF/250VCT2E474MS037
C605CAP ELECTROLYTIC 470µF/200V MCA2D471DYG07
C609POLYESTER FILM CAP. (PB FREE) 0.047µF/
C611CERAMIC CAP. 470pF/2KVCA3D471PAN04
C612POLYESTER FILM CAP. (PB FREE) 0.068µF/
C647ELECTROLYTIC CAP. 1µF/50V MCE1JMASDL1R0
C648ELECTROLYTIC CAP. 100µF/10V MCE1AMASDL101
C652ELECTROLYTIC CAP. 1000µF/6.3V MCE0KMASDL102
C653ELECTROLYTIC CAP. 220µF/10V MCE1AMASDL221
C654ELECTROLYTIC CAP. 220µF/10V MCE1AMASDL221
C656ELECTROLYTIC CAP. 100µF/16V MCE1CMASDL101
C657ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C676ELECTROLYTIC CAP. 2.2µF/50V MCE1JMASDL2R2
C681CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C682CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C683CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C684CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C691#SAFTY CAP. 1000pF/250V KXCA2E102MR101
C693#SAFTY CAP. 1000pF/250V KXCA2E102MR101
C723CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C724CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C731CHIP CERAMIC CAP. CH J 39pF/50VCHD1JJ3CH390
C732CHIP CERAMIC CAP. CH J 39pF/50VCHD1JJ3CH390
C733CHIP CERAMIC CAP. CH J 39pF/50VCHD1JJ3CH390
C734CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
C735CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
C736CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
C743CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C744CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C771ELECTROLYTIC CAP. 100µF/16V MCE1CMASDL101
C772CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C775CHIP CERAMIC CAP.(1608) CH J 100pF/50VCHD1JJ3CH101
C776CHIP CERAMIC CAP.(1608) CH J 100pF/50VCHD1JJ3CH101
C801CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C802CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C803CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C804CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C805CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C806CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C807CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C808CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C809CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C810CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C811CHIP CERAMIC CAP.(1608) B K 0.47µF/16VCHD1CK30B474
C815CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
100V J
100V J
100V J
100V J
CA2A473DT018
CA2A683DT018
CA2A152DT018
CA2A222DT018
2009020315-1A91F3EL
Page 74
Ref. No.DescriptionPart No.
C816ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C817CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C818CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C819ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C820CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C821CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C822CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C823ELECTROLYTIC CAP. 1000µF/25V MCE1EMZNDL102
C824CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C825CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C826CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C827ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C828CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C829CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C830CHIP CERAMIC CAP.(1608) B K 0.47µF/16VCHD1CK30B474
C832ELECTROLYTIC CAP. 3.3µF/50V MCE1JMASDL3R3
C833CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C834CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C835CHIP CERAMIC CAP.(1608) B K 2700pF/50VCHD1JK30B272
C836CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C837CHIP CERAMIC CAP.(1608) B K 2700pF/50VCHD1JK30B272
C838CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C839CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C841CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C842CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C843CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C844ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C845CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C846CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C847CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C871CHIP CERAMIC CAP.(1608) B K 3300pF/50VCHD1JK30B332
C872CHIP CERAMIC CAP.(1608) B K 3300pF/50VCHD1JK30B332
C873CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C874CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C875CHIP CERAMIC CAP.(1608) CH J 270pF/50VCHD1JJ3CH271
C876CHIP CERAMIC CAP.(1608) CH J 270pF/50VCHD1JJ3CH271
C877CHIP CERAMIC CAP.(1608) B K 6800pF/50VCHD1JK30B682
C878CHIP CERAMIC CAP.(1608) B K 6800pF/50VCHD1JK30B682
C879CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C880ELECTROLYTIC CAP. 100µF/16V MCE1CMASDL101
C882CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C883CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C884CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C885CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
JK751JACK SW DIN PCB L DIN-435C(777D)JYEL040YUQ03
JK752JACK RCA PCB L RCA-101S(1)-03JXRL010YUQ12
JK753JACK RCA PCB L RCA-101S(1)-04JXRL010YUQ13
JK754JACK SW RCA PCB L RCA-102F(RD)JYRL010YUQ05
----------
INVERTER ASSEMBLY
Ref. No.DescriptionPart No.
INVERTER ASSEMBLY
Consists of the following:
INVERTER CBA
FUNCTION CBA
IR SENSOR CBA
JUNCTION CBA
INVERTER CBA
Ref. No.DescriptionPart No.
INVERTER CBA
Consists of the following:
CAPACITORS
C1001CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1002CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1003CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1004CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1005CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1006CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1007CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1008CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1009ELECTROLYTIC CAP. 100µF/25V MCE1EMASDL101
C1011CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1012POLYESTER FILM CAP. (PB FREE) 0.0039µF/
C1013CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1014CHIP CERAMIC CAP.(1608) B K 6800pF/50VCHD1JK30B682
C1040CHIP CERAMIC CAP.(1608) B K 0.47µF/10VCHD1AK30B474
C1052ELECTROLYTIC CAP 100µF/100VCE2AMZNDL101
C1053ELECTROLYTIC CAP 100µF/100VCE2AMZNDL101
C1056ELECTROLYTIC CAP 100µF/100VCE2AMZNDL101
C1061CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1062CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1063ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1064CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1065CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1066CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1067ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1068CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1072CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1111CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1112CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1113ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1114CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1115CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1116CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1117ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1118CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1122CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1161CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1162CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1163ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1164CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1165CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1166CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1167ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1168CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1172CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1211CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1212CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1213ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1214CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1215CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
100V J
1ESA19751
----------
----------
----------
----------
----------
CA2A392DT018
2009020315-5A91F3EL
Page 78
Ref. No.DescriptionPart No.
C1216CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1217ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1218CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1222CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1500CERAMIC CAP. 470pF/2KVCA3D471PAN04
C1502CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1550CERAMIC CAP. 470pF/2KVCA3D471PAN04
C1552CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1600CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1620CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C1702CHIP CERAMIC CAP.(1608) F Z 0.22µF/50VCHD1JZ30F224
C1703CHIP CERAMIC CAP.(1608) F Z 0.22µF/50VCHD1JZ30F224
C1800ELECTROLYTIC CAP. 100µF/25V MCE1EMASDL101
C1801ELECTROLYTIC CAP. 22µF/35V MCE1GMASDL220
C1802CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1905# SAFTY CAP. 2200pF/250V KXCA2E222MR101
C1910CAP ELECTROLYTIC 270µF/200VCEA271DYG005
C1930CERAMIC CAP. 1000pF/2KVCA3D102PAN04
C1931# POLYESTER FILM CAP. (PB FREE) 0.001µF/
C1932POLYESTER FILM CAP. (PB FREE) 0.027µF/
C1933POLYESTER FILM CAP. (PB FREE) 0.1µF/100V JCA2A104DT018
C1940CERAMIC CAP. B K 0.01µF/1KVCCD3AKP0B103
C1970POLYESTER FILM CAP. (PB FREE) 0.047µF/
C1981CHIP CERAMIC CAP. F Z 0.01µF/50VCHD1JZ30F103
C1982ELECTROLYTIC CAP. 0.47µF/50V MCE1JMASDLR47
C1990CERAMIC CAP. B K 820pF/1KVCCD3AKP0B821
C1992# ELECTROLYTIC CAP 470µF/100VCE2AMZNDL471
Q1001TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1003TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1004TRANSISTOR KTA1267-GR-AT/PNQS1KTA1267P
Q1005TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1060TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1061TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1110TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1111TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1160TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1161TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1210TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1211TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1500FET MOS 2SK2417(FT)QFWZSK2417FT
Q1501TRANSISTOR 2SC2120-Y(TE2 F T)QQSY2SC2120F
Q1502TRANSISTOR 2SA950-O (TE2 F T)QQS002SA950F
Q1503TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1550FET MOS 2SK2417(FT)QFWZSK2417FT
Q1551TRANSISTOR 2SC2120-Y(TE2 F T)QQSY2SC2120F
Q1552TRANSISTOR 2SA950-O (TE2 F T)QQS002SA950F
Q1553TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1600TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1621TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1800TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1801TRANSISTOR KTA1267-GR-AT/PNQS1KTA1267P
Q1802TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1803TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1804TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1815TRANSISTOR 2SA950-O (TE2 F T)QQS002SA950F
Q1930# FET MOS 2SK3561(Q) IDSS100UAQFWZ2SK3561Q
Q1931# TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1932# TRANSISTOR 2SC2120-Y(TE2 F T)QQSY2SC2120F
Q1970NPN TRANSISTOR KTC3200-GR-AT/PNQSGKTC3200P
Q1971TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1972TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
RESISTORS
R1001CHIP RES. 1/10W F 22k ΩRRXAFR5H2202
R1002CHIP RES. 1/10W F 1.0k ΩRRXAFR5H1001
R1003CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1004CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1005RES CARBON FILM T 1/4W J 220k ΩRCX4224T1001
R1006RES CARBON FILM T 1/4W J 56k ΩRCX4563T1001
R1007CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1008CHIP RES. 1/10W J 2.2k ΩRRXAJR5Z0222
R1009CHIP RES. 1/10W J 82k ΩRRXAJR5Z0823
R1010CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1011CHIP RES. 1/10W F 10k ΩRRXAFR5H1002
R1012CHIP RES. 1/10W F 24k ΩRRXAFR5H2402
R1013CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1014CHIP RES. 1/10W F 4.7k ΩRRXAFR5H4701
R1015CHIP RES. 1/10W F 7.50 k ΩRRXAFR5H7501
R1016CHIP RES. 1/10W J 120k ΩRRXAJR5Z0124
R1017CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1018RES CARBON FILM T 1/4W J 1.2k ΩRCX4122T1001
R1019WIRE COPPER 6111-06003-0120XZ40C0SHG002
R1021RES CARBON FILM T 1/4W J 10k ΩRCX4103T1001
R1022CHIP RES. 1/10W F 2.2k ΩRRXAFR5H2201
Ref. No.DescriptionPart No.
R1023CHIP RES. 1/10W F 3.3k ΩRRXAFR5H3301
R1024CHIP RES. 1/10W F 100k ΩRRXAFR5H1003
R1026CHIP RES. 1/10W F 220 ΩRRXAFR5H2200
R1028CHIP RES. 1/10W F 36k ΩRRXAFR5H3602
R1030CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1031CHIP RES. 1/10W J 15k ΩRRXAJR5Z0153
R1032RES CARBON FILM T 1/4W J 24k ΩRCX4243T1001
R1033CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1034CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1035RES CARBON FILM T 1/4W J 3.3k ΩRCX4332T1001
R1036RES CARBON FILM T 1/4W J 10k ΩRCX4103T1001
R1040METAL OXIDE FILM RES. 2W J 0.39 ΩRN02R39ZU001
R1041RES CARBON FILM T 1/4W J 33k ΩRCX4333T1001
R1043RES CARBON FILM T 1/4W J 12k ΩRCX4123T1001
R1044METAL OXIDE FILM RES. 2W J 0.39 ΩRN02R39ZU001
R1060CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1061CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1062CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1063CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1064CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1065RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1066CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1067CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1068CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1069CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1070CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1071RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1072CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1080CHIP RES. 1/10W F 22k ΩRRXAFR5H2202
R1081CHIP RES. 1/10W J 5.6k ΩRRXAJR5Z0562
R1110CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1111CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1112CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1113CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1114CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1115RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1116CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1117CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1118CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1119CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1120CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1121RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1122CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1160CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1161CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1162CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1163CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1164CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1165RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1166CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1167CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1168CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1169CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1170CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1171RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1172CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1210CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1211CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1212CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1213CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1214CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1215RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1216CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
2009020315-7A91F3EL
Page 80
Ref. No.DescriptionPart No.
R1217CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1218CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1219CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1220CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1221RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1222CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1500CHIP RES. 1/10W J 12k ΩRRXAJR5Z0123
R1501RES CARBON FILM T 1/4W J 10 ΩRCX4100T1001
R1502RES CARBON FILM T 1/4W J 150 ΩRCX4151T1001
R1503RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1504RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1505CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1506CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1550RES CARBON FILM T 1/4W J 12k ΩRCX4123T1001
R1551RES CARBON FILM T 1/4W J 10 ΩRCX4100T1001
R1552RES CARBON FILM T 1/4W J 150 ΩRCX4151T1001
R1553RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1554RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1555CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1556CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1600CHIP RES. 1/10W J 18k ΩRRXAJR5Z0183
R1601CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1620CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1621CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1630CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1631CHIP RES. 1/10W J 3.3k ΩRRXAJR5Z0332
R1700CHIP RES. 1/10W J 47k ΩRRXAJR5Z0473
R1701CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1800CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1801CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1802CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1803RES CARBON FILM T 1/4W J 4.7k ΩRCX4472T1001
R1804RES CARBON FILM T 1/4W J 1.2 ΩRCX41R2T1001
R1805RES CARBON FILM T 1/4W J 1.0k ΩRCX4102T1001
R1806CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1807CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1808CHIP RES. 1/10W J 5.1k ΩRRXAJR5Z0512
R1809CHIP RES. 1/10W J 1.5k ΩRRXAJR5Z0152
R1810RES CARBON FILM T 1/4W J 4.7k ΩRCX4472T1001
R1811RES CARBON FILM T 1/4W J 100k ΩRCX4104T1001
R1812RES CARBON FILM T 1/4W J 12k ΩRCX4123T1001
R1930RES CARBON FILM T 1/4W J 47 ΩRCX4470T1001
R1931RES CARBON FILM T 1/4W J 47k ΩRCX4473T1001
R1932RES CARBON FILM T 1/4W J 82 ΩRCX4820T1001
R1933RES CARBON FILM T 1/4W J 82 ΩRCX4820T1001
R1934RES CARBON FILM T 1/4W J 82 ΩRCX4820T1001
R1935RES CARBON FILM T 1/4W J 1.5k ΩRCX4152T1001
R1936RES CARBON FILM T 1/4W J 180 ΩRCX4181T1001
R1937# METAL OXIDE FILM RES. 2W J 0.33 ΩRN02R33ZU001
R1939RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1940RES CARBON FILM T 1/4W J 220k ΩRCX4224T1001
R1941RES CARBON FILM T 1/4W J 220k ΩRCX4224T1001
R1942RES CARBON FILM T 1/4W J 180k ΩRCX4184T1001
R1943RES CARBON FILM T 1/4W J 820k ΩRCX4824T1001
R1944RES CARBON FILM T 1/4W J 820k ΩRCX4824T1001
R1945RES CARBON FILM T 1/4W J 390k ΩRCX4394T1001
R1946METAL OXIDE RES. 1W J 47k ΩRN01473ZU001
R1947METAL OXIDE RES. 1W J 47k ΩRN01473ZU001
R1948METAL OXIDE RES. 1W J 47k ΩRN01473ZU001
R1967RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1968RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1969RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1970RES CARBON FILM T 1/4W J 270 ΩRCX4271T1001
Ref. No.DescriptionPart No.
R1971RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1972CHIP RES. 1/10W J 68k ΩRRXAJR5Z0683
R1973CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1974CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1975CHIP RES. 1/10W F 30k ΩRRXAFR5H3002
R1976CHIP RES. 1/10W F 30k ΩRRXAFR5H3002
R1977CHIP RES. 1/10W F 27k ΩRRXAFR5H2702
R1979CHIP RES. 1/10W F 6.8k ΩRRXAFR5H6801
R1980CHIP RES. 1/10W F 360 ΩRRXAFR5H3600
R1981CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1982CHIP RES. 1/10W J 3.3k ΩRRXAJR5Z0332
R1983RES CARBON FILM T 1/4W J 33k ΩRCX4333T1001
R1984RES CARBON FILM T 1/4W J 15k ΩRCX4153T1001
R1986CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1988RES CARBON FILM T 1/4W J 1.0k ΩRCX4102T1001
MISCELLANEOUS
B13HEAT SINK PNA A94F0UH1EM428121
B14HEAT SINK PNB ASSEMBLY A94F0UH1EM428123
BC1301WIRE COPPER 6111-06003-0120XZ40C0SHG002
BC1500COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1501COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1550COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1551COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1930BEADS INDUCTOR FBR07HA121SB-00LLBF00STU030
BC1931BEADS INDUCTOR FBR07HA121SB-00LLBF00STU030
L3SCREW B-TIGHT D3X8 BIND HEAD+GBJB3080
T1050# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1100# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1150# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1200# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1950# TRANS POWER BCK-35-0607LTT3PC0XB048
FUNCTION CBA
Ref. No.DescriptionPart No.
FUNCTION CBA
Consists of the following:
----------
CAPACITOR
C108CAP CERAMIC (AX) 0.1µF/50V/F/ZCA1J104TU062
RESISTORS
R108RES CARBON FILM T 1/4W J 220 ΩRCX4221T1001
R109RES CARBON FILM T 1/4W G 10k ΩRCX4103T1002
R111RES CARBON FILM T 1/4W G 4.7k ΩRCX4472T1002
R112RES CARBON FILM T 1/4W G 2.7k ΩRCX4272T1002
R113RES CARBON FILM T 1/4W G 4.7k ΩRCX4472T1002
R114RES CARBON FILM T 1/4W G 8.2k ΩRCX4822T1002
R115RES CARBON FILM T 1/4W G 18k ΩRCX4183T1002
D104LED GREEN 333GT/E(FNA)NPWZ33GTEFNA
D105LED L-53HTNP4Z000L53HT
RESISTORS
R123RES CARBON FILM T 1/4W J 220 ΩRCX4221T1001
R124RES CARBON FILM T 1/4W J 220 ΩRCX4221T1001
R126CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R127RES CARBON FILM T 1/4W J 3.3k ΩRCX4332T1001
R128RES CARBON FILM T 1/4W J 100 ΩRCX4101T1001
CN101242 SERIES CONNECTOR TUC-P08X-B1 WHT STJCTUB08TG002
----------
2009020315-9A91F3EL
Page 82
ELECTRICAL PARTS LIST [ 32MF339B/F7 ]
PRODUCT SAFETY NOTE: Products marked with a
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTES:
1. Parts that are not assigned part numbers (---------)
are not available.
2. Tolerance of Capacitors and Resistors are noted
with the following symbols.
C.....±0.25%D.....±0.5%F.....±1%
G.....±2%J......±5%K.....±10%
M.....±20%N.....±30%Z.....+80/-20%
DIGITAL MAIN CBA UNIT
Ref. No.DescriptionPart No.
DIGITAL MAIN CBA UNIT1ESA19753
MPW CBA
Ref. No.DescriptionPart No.
MPW CBA
Consists of the following:
POWER SUPPLY CBA(MPW-1)
JACK CBA(MPW-2)
POWER SUPPLY CBA(MPW-1)
Ref. No.DescriptionPart No.
POWER SUPPLY CBA(MPW-1)
Consists of the following:
CAPACITORS
C201CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C202CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C203CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C204ELECTROLYTIC CAP. 2.2µF/50V MCE1JMASDL2R2
C207CHIP CERAMIC CAP.(1608) B K 0.1µF/16VCHD1CK30B104
C210ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C216CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C217CHIP CERAMIC CAP.(1608) B K 0.1µF/16VCHD1CK30B104
C218CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C219ELECTROLYTIC CAP. 47µF/25V MCE1EMASDL470
C221CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C222ELECTROLYTIC CAP. 470µF/25V MCE1EMASDL471
C223ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C224ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C302CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C303ELECTROLYTIC CAP. 330µF/10V MCE1AMASDL331
C305CHIP CERAMIC CAP.(1608) F Z 0.1µF/50VCHD1JZ30F104
C306ELECTROLYTIC CAP. 1µF/50V MCE1JMASDL1R0
C309CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C310CHIP CERAMIC CAP.(1608) CH J 47pF/50VCHD1JJ3CH470
C311CHIP CERAMIC CAP.(1608) CH J 47pF/50VCHD1JJ3CH470
C501ELECTROLYTIC CAP. 100µF/25V MCE1EMASDL101
C601#CAP METALLIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004
1ESA19752
----------
----------
----------
Ref. No.DescriptionPart No.
C602#CAP METALLIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004
C605CAP ELECTROLYTIC 470µF/200V MCA2D471DYG07
C609POLYESTER FILM CAP. (PB FREE) 0.047µF/
C611CERAMIC CAP. 470pF/2KVCA3D471PAN04
C612POLYESTER FILM CAP. (PB FREE) 0.068µF/
C647ELECTROLYTIC CAP. 1µF/50V MCE1JMASDL1R0
C648ELECTROLYTIC CAP. 100µF/10V MCE1AMASDL101
C652ELECTROLYTIC CAP. 1000µF/6.3V MCE0KMASDL102
C653ELECTROLYTIC CAP. 220µF/10V MCE1AMASDL221
C654ELECTROLYTIC CAP. 220µF/10V MCE1AMASDL221
C656ELECTROLYTIC CAP. 100µF/16V MCE1CMASDL101
C657ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C676ELECTROLYTIC CAP. 2.2µF/50V MCE1JMASDL2R2
C681CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C682CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C683CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C684CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C691#SAFTY CAP. 1000pF/250V KXCA2E102MR101
C693#SAFTY CAP. 1000pF/250V KXCA2E102MR101
C723CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C724CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C731CHIP CERAMIC CAP. CH J 39pF/50VCHD1JJ3CH390
C732CHIP CERAMIC CAP. CH J 39pF/50VCHD1JJ3CH390
C733CHIP CERAMIC CAP. CH J 39pF/50VCHD1JJ3CH390
C734CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
C735CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
C736CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
C743CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C744CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C771ELECTROLYTIC CAP. 100µF/16V MCE1CMASDL101
C772CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C775CHIP CERAMIC CAP.(1608) CH J 100pF/50VCHD1JJ3CH101
C776CHIP CERAMIC CAP.(1608) CH J 100pF/50VCHD1JJ3CH101
C801CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C802CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C803CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C804CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C805CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C806CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C807CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C808CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C809CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C810CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C811CHIP CERAMIC CAP.(1608) B K 0.47µF/16VCHD1CK30B474
C815CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
100V J
100V J
100V J
100V J
CA2A473DT018
CA2A683DT018
CA2A152DT018
CA2A222DT018
2009021015-10A91F0EL
Page 83
Ref. No.DescriptionPart No.
C816ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C817CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C818CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C819ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C820CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C821CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C822CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C823ELECTROLYTIC CAP. 1000µF/25V MCE1EMZNDL102
C824CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C825CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C826CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C827ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C828CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C829CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C830CHIP CERAMIC CAP.(1608) B K 0.47µF/16VCHD1CK30B474
C832ELECTROLYTIC CAP. 3.3µF/50V MCE1JMASDL3R3
C833CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C834CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C835CHIP CERAMIC CAP.(1608) B K 2700pF/50VCHD1JK30B272
C836CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C837CHIP CERAMIC CAP.(1608) B K 2700pF/50VCHD1JK30B272
C838CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C839CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C841CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C842CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C843CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C844ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C845CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C846CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C847CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C871CHIP CERAMIC CAP.(1608) B K 3300pF/50VCHD1JK30B332
C872CHIP CERAMIC CAP.(1608) B K 3300pF/50VCHD1JK30B332
C873CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C874CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C875CHIP CERAMIC CAP.(1608) CH J 270pF/50VCHD1JJ3CH271
C876CHIP CERAMIC CAP.(1608) CH J 270pF/50VCHD1JJ3CH271
C877CHIP CERAMIC CAP.(1608) B K 6800pF/50VCHD1JK30B682
C878CHIP CERAMIC CAP.(1608) B K 6800pF/50VCHD1JK30B682
C879CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C880ELECTROLYTIC CAP. 100µF/16V MCE1CMASDL101
C882CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C883CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C884CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C885CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
JK751JACK SW DIN PCB L DIN-435C(777D)JYEL040YUQ03
JK752JACK RCA PCB L RCA-101S(1)-03JXRL010YUQ12
JK753JACK RCA PCB L RCA-101S(1)-04JXRL010YUQ13
JK754JACK SW RCA PCB L RCA-102F(RD)JYRL010YUQ05
----------
INVERTER ASSEMBLY
Ref. No.DescriptionPart No.
INVERTER ASSEMBLY
Consists of the following:
INVERTER CBA
FUNCTION CBA
IR SENSOR CBA
JUNCTION CBA
INVERTER CBA
Ref. No.DescriptionPart No.
INVERTER CBA
Consists of the following:
CAPACITORS
C1001CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1002CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1003CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1004CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1005CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1006CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1007CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1008CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1009ELECTROLYTIC CAP. 100µF/25V MCE1EMASDL101
C1011CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1012POLYESTER FILM CAP. (PB FREE) 0.0039µF/
C1013CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1014CHIP CERAMIC CAP.(1608) B K 6800pF/50VCHD1JK30B682
C1040CHIP CERAMIC CAP.(1608) B K 0.47µF/10VCHD1AK30B474
C1052ELECTROLYTIC CAP 100µF/100VCE2AMZNDL101
C1053ELECTROLYTIC CAP 100µF/100VCE2AMZNDL101
C1056ELECTROLYTIC CAP 100µF/100VCE2AMZNDL101
C1061CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1062CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1063ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1064CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1065CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1066CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1067ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1068CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1072CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1111CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1112CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1113ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1114CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1115CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1116CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1117ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1118CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1122CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1161CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1162CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1163ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1164CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1165CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1166CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1167ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1168CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1172CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1211CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1212CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1213ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1214CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1215CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
100V J
1ESA19751
----------
----------
----------
----------
----------
CA2A392DT018
2009021015-14A91F0EL
Page 87
Ref. No.DescriptionPart No.
C1216CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1217ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1218CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1222CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1500CERAMIC CAP. 470pF/2KVCA3D471PAN04
C1502CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1550CERAMIC CAP. 470pF/2KVCA3D471PAN04
C1552CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1600CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1620CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C1702CHIP CERAMIC CAP.(1608) F Z 0.22µF/50VCHD1JZ30F224
C1703CHIP CERAMIC CAP.(1608) F Z 0.22µF/50VCHD1JZ30F224
C1800ELECTROLYTIC CAP. 100µF/25V MCE1EMASDL101
C1801ELECTROLYTIC CAP. 22µF/35V MCE1GMASDL220
C1802CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1905# SAFTY CAP. 2200pF/250V KXCA2E222MR101
C1910CAP ELECTROLYTIC 270µF/200VCEA271DYG005
C1930CERAMIC CAP. 1000pF/2KVCA3D102PAN04
C1931# POLYESTER FILM CAP. (PB FREE) 0.001µF/
C1932POLYESTER FILM CAP. (PB FREE) 0.027µF/
C1933POLYESTER FILM CAP. (PB FREE) 0.1µF/100V JCA2A104DT018
C1940CERAMIC CAP. B K 0.01µF/1KVCCD3AKP0B103
C1970POLYESTER FILM CAP. (PB FREE) 0.047µF/
C1981CHIP CERAMIC CAP. F Z 0.01µF/50VCHD1JZ30F103
C1982ELECTROLYTIC CAP. 0.47µF/50V MCE1JMASDLR47
C1990CERAMIC CAP. B K 820pF/1KVCCD3AKP0B821
C1992# ELECTROLYTIC CAP 470µF/100VCE2AMZNDL471
Q1001TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1003TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1004TRANSISTOR KTA1267-GR-AT/PNQS1KTA1267P
Q1005TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1060TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1061TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1110TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1111TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1160TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1161TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1210TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1211TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1500FET MOS 2SK2417(FT)QFWZSK2417FT
Q1501TRANSISTOR 2SC2120-Y(TE2 F T)QQSY2SC2120F
Q1502TRANSISTOR 2SA950-O (TE2 F T)QQS002SA950F
Q1503TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1550FET MOS 2SK2417(FT)QFWZSK2417FT
Q1551TRANSISTOR 2SC2120-Y(TE2 F T)QQSY2SC2120F
Q1552TRANSISTOR 2SA950-O (TE2 F T)QQS002SA950F
Q1553TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1600TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1621TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1800TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1801TRANSISTOR KTA1267-GR-AT/PNQS1KTA1267P
Q1802TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1803TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1804TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1815TRANSISTOR 2SA950-O (TE2 F T)QQS002SA950F
Q1930# FET MOS 2SK3561(Q) IDSS100UAQFWZ2SK3561Q
Q1931# TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1932# TRANSISTOR 2SC2120-Y(TE2 F T)QQSY2SC2120F
Q1970NPN TRANSISTOR KTC3200-GR-AT/PNQSGKTC3200P
Q1971TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1972TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
RESISTORS
R1001CHIP RES. 1/10W F 22k ΩRRXAFR5H2202
R1002CHIP RES. 1/10W F 1.0k ΩRRXAFR5H1001
R1003CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1004CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1005RES CARBON FILM T 1/4W J 220k ΩRCX4224T1001
R1006RES CARBON FILM T 1/4W J 56k ΩRCX4563T1001
R1007CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1008CHIP RES. 1/10W J 2.2k ΩRRXAJR5Z0222
R1009CHIP RES. 1/10W J 82k ΩRRXAJR5Z0823
R1010CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1011CHIP RES. 1/10W F 10k ΩRRXAFR5H1002
R1012CHIP RES. 1/10W F 24k ΩRRXAFR5H2402
R1013CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1014CHIP RES. 1/10W F 4.7k ΩRRXAFR5H4701
R1015CHIP RES. 1/10W F 7.50 k ΩRRXAFR5H7501
R1016CHIP RES. 1/10W J 120k ΩRRXAJR5Z0124
R1017CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1018RES CARBON FILM T 1/4W J 1.2k ΩRCX4122T1001
R1019WIRE COPPER 6111-06003-0120XZ40C0SHG002
R1021RES CARBON FILM T 1/4W J 10k ΩRCX4103T1001
R1022CHIP RES. 1/10W F 2.2k ΩRRXAFR5H2201
Ref. No.DescriptionPart No.
R1023CHIP RES. 1/10W F 3.3k ΩRRXAFR5H3301
R1024CHIP RES. 1/10W F 100k ΩRRXAFR5H1003
R1026CHIP RES. 1/10W F 220 ΩRRXAFR5H2200
R1028CHIP RES. 1/10W F 36k ΩRRXAFR5H3602
R1030CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1031CHIP RES. 1/10W J 15k ΩRRXAJR5Z0153
R1032RES CARBON FILM T 1/4W J 24k ΩRCX4243T1001
R1033CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1034CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1035RES CARBON FILM T 1/4W J 3.3k ΩRCX4332T1001
R1036RES CARBON FILM T 1/4W J 10k ΩRCX4103T1001
R1040METAL OXIDE FILM RES. 2W J 0.39 ΩRN02R39ZU001
R1041RES CARBON FILM T 1/4W J 33k ΩRCX4333T1001
R1043RES CARBON FILM T 1/4W J 12k ΩRCX4123T1001
R1044METAL OXIDE FILM RES. 2W J 0.39 ΩRN02R39ZU001
R1060CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1061CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1062CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1063CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1064CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1065RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1066CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1067CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1068CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1069CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1070CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1071RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1072CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1080CHIP RES. 1/10W F 22k ΩRRXAFR5H2202
R1081CHIP RES. 1/10W J 5.6k ΩRRXAJR5Z0562
R1110CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1111CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1112CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1113CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1114CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1115RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1116CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1117CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1118CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1119CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1120CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1121RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1122CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1160CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1161CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1162CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1163CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1164CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1165RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1166CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1167CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1168CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1169CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1170CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1171RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1172CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1210CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1211CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1212CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1213CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1214CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1215RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1216CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
2009021015-16A91F0EL
Page 89
Ref. No.DescriptionPart No.
R1217CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1218CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1219CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1220CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1221RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1222CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1500CHIP RES. 1/10W J 12k ΩRRXAJR5Z0123
R1501RES CARBON FILM T 1/4W J 10 ΩRCX4100T1001
R1502RES CARBON FILM T 1/4W J 150 ΩRCX4151T1001
R1503RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1504RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1505CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1506CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1550RES CARBON FILM T 1/4W J 12k ΩRCX4123T1001
R1551RES CARBON FILM T 1/4W J 10 ΩRCX4100T1001
R1552RES CARBON FILM T 1/4W J 150 ΩRCX4151T1001
R1553RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1554RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1555CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1556CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1600CHIP RES. 1/10W J 18k ΩRRXAJR5Z0183
R1601CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1620CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1621CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1630CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1631CHIP RES. 1/10W J 3.3k ΩRRXAJR5Z0332
R1700CHIP RES. 1/10W J 47k ΩRRXAJR5Z0473
R1701CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1800CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1801CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1802CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1803RES CARBON FILM T 1/4W J 4.7k ΩRCX4472T1001
R1804RES CARBON FILM T 1/4W J 1.2 ΩRCX41R2T1001
R1805RES CARBON FILM T 1/4W J 1.0k ΩRCX4102T1001
R1806CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1807CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1808CHIP RES. 1/10W J 5.1k ΩRRXAJR5Z0512
R1809CHIP RES. 1/10W J 1.5k ΩRRXAJR5Z0152
R1810RES CARBON FILM T 1/4W J 4.7k ΩRCX4472T1001
R1811RES CARBON FILM T 1/4W J 100k ΩRCX4104T1001
R1812RES CARBON FILM T 1/4W J 12k ΩRCX4123T1001
R1930RES CARBON FILM T 1/4W J 47 ΩRCX4470T1001
R1931RES CARBON FILM T 1/4W J 47k ΩRCX4473T1001
R1932RES CARBON FILM T 1/4W J 82 ΩRCX4820T1001
R1933RES CARBON FILM T 1/4W J 82 ΩRCX4820T1001
R1934RES CARBON FILM T 1/4W J 82 ΩRCX4820T1001
R1935RES CARBON FILM T 1/4W J 1.5k ΩRCX4152T1001
R1936RES CARBON FILM T 1/4W J 180 ΩRCX4181T1001
R1937# METAL OXIDE FILM RES. 2W J 0.33 ΩRN02R33ZU001
R1939RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1940RES CARBON FILM T 1/4W J 220k ΩRCX4224T1001
R1941RES CARBON FILM T 1/4W J 220k ΩRCX4224T1001
R1942RES CARBON FILM T 1/4W J 180k ΩRCX4184T1001
R1943RES CARBON FILM T 1/4W J 820k ΩRCX4824T1001
R1944RES CARBON FILM T 1/4W J 820k ΩRCX4824T1001
R1945RES CARBON FILM T 1/4W J 390k ΩRCX4394T1001
R1946METAL OXIDE RES. 1W J 47k ΩRN01473ZU001
R1947METAL OXIDE RES. 1W J 47k ΩRN01473ZU001
R1948METAL OXIDE RES. 1W J 47k ΩRN01473ZU001
R1967RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1968RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1969RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1970RES CARBON FILM T 1/4W J 270 ΩRCX4271T1001
Ref. No.DescriptionPart No.
R1971RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1972CHIP RES. 1/10W J 68k ΩRRXAJR5Z0683
R1973CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1974CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1975CHIP RES. 1/10W F 30k ΩRRXAFR5H3002
R1976CHIP RES. 1/10W F 30k ΩRRXAFR5H3002
R1977CHIP RES. 1/10W F 27k ΩRRXAFR5H2702
R1979CHIP RES. 1/10W F 6.8k ΩRRXAFR5H6801
R1980CHIP RES. 1/10W F 360 ΩRRXAFR5H3600
R1981CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1982CHIP RES. 1/10W J 3.3k ΩRRXAJR5Z0332
R1983RES CARBON FILM T 1/4W J 33k ΩRCX4333T1001
R1984RES CARBON FILM T 1/4W J 15k ΩRCX4153T1001
R1986CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1988RES CARBON FILM T 1/4W J 1.0k ΩRCX4102T1001
MISCELLANEOUS
B13HEAT SINK PNA A94F0UH1EM428121
B14HEAT SINK PNB ASSEMBLY A94F0UH1EM428123
BC1301WIRE COPPER 6111-06003-0120XZ40C0SHG002
BC1500COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1501COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1550COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1551COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1930BEADS INDUCTOR FBR07HA121SB-00LLBF00STU030
BC1931BEADS INDUCTOR FBR07HA121SB-00LLBF00STU030
L3SCREW B-TIGHT D3X8 BIND HEAD+GBJB3080
T1050# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1100# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1150# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1200# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1950# TRANS POWER BCK-35-0607LTT3PC0XB048
FUNCTION CBA
Ref. No.DescriptionPart No.
FUNCTION CBA
Consists of the following:
----------
CAPACITOR
C108CAP CERAMIC (AX) 0.1µF/50V/F/ZCA1J104TU062
RESISTORS
R108RES CARBON FILM T 1/4W J 220 ΩRCX4221T1001
R109RES CARBON FILM T 1/4W G 10k ΩRCX4103T1002
R111RES CARBON FILM T 1/4W G 4.7k ΩRCX4472T1002
R112RES CARBON FILM T 1/4W G 2.7k ΩRCX4272T1002
R113RES CARBON FILM T 1/4W G 4.7k ΩRCX4472T1002
R114RES CARBON FILM T 1/4W G 8.2k ΩRCX4822T1002
R115RES CARBON FILM T 1/4W G 18k ΩRCX4183T1002
D104LED GREEN 333GT/E(FNA)NPWZ33GTEFNA
D105LED L-53HTNP4Z000L53HT
RESISTORS
R123RES CARBON FILM T 1/4W J 220 ΩRCX4221T1001
R124RES CARBON FILM T 1/4W J 220 ΩRCX4221T1001
R126CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R127RES CARBON FILM T 1/4W J 3.3k ΩRCX4332T1001
R128RES CARBON FILM T 1/4W J 100 ΩRCX4101T1001
CN101242 SERIES CONNECTOR TUC-P08X-B1 WHT STJCTUB08TG002
----------
2009021015-18A91F0EL
Page 91
ELECTRICAL PARTS LIST [ LC320SSX ]
PRODUCT SAFETY NOTE: Products marked with a
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTES:
1. Parts that are not assigned part numbers (---------)
are not available.
2. Tolerance of Capacitors and Resistors are noted
with the following symbols.
C.....±0.25%D.....±0.5%F.....±1%
G.....±2%J......±5%K.....±10%
M.....±20%N.....±30%Z.....+80/-20%
DIGITAL MAIN CBA UNIT
Ref. No.DescriptionPart No.
DIGITAL MAIN CBA UNIT1ESA19753
MPW CBA
Ref. No.DescriptionPart No.
MPW CBA
Consists of the following:
POWER SUPPLY CBA(MPW-1)
JACK CBA(MPW-2)
POWER SUPPLY CBA(MPW-1)
Ref. No.DescriptionPart No.
POWER SUPPLY CBA(MPW-1)
Consists of the following:
CAPACITORS
C201CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C202CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C203CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C204ELECTROLYTIC CAP. 2.2µF/50V MCE1JMASDL2R2
C207CHIP CERAMIC CAP.(1608) B K 0.1µF/16VCHD1CK30B104
C210ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C216CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C217CHIP CERAMIC CAP.(1608) B K 0.1µF/16VCHD1CK30B104
C218CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C219ELECTROLYTIC CAP. 47µF/25V MCE1EMASDL470
C221CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C222ELECTROLYTIC CAP. 470µF/25V MCE1EMASDL471
C223ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C224ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C302CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C303ELECTROLYTIC CAP. 1000µF/6.3V MCE0KMASDL102
C305CHIP CERAMIC CAP.(1608) F Z 0.1µF/50VCHD1JZ30F104
C306ELECTROLYTIC CAP. 1µF/50V MCE1JMASDL1R0
C309CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C310CHIP CERAMIC CAP.(1608) CH J 47pF/50VCHD1JJ3CH470
C311CHIP CERAMIC CAP.(1608) CH J 47pF/50VCHD1JJ3CH470
C501ELECTROLYTIC CAP. 100µF/25V MCE1EMASDL101
C601#CAP METALIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004
1ESA19752
----------
----------
----------
Ref. No.DescriptionPart No.
C602#CAP METALIZED FILM 0.47µF/300V K 3.5MMCT2F474DC004
C605CAP ELECTROLYTIC 470µF/200V MCA2D471DYG07
C609POLYESTER FILM CAP. (PB FREE) 0.047µF/
C611CERAMIC CAP. 470pF/2KVCA3D471PAN04
C612POLYESTER FILM CAP. (PB FREE) 0.068µF/
C647ELECTROLYTIC CAP. 1µF/50V MCE1JMASDL1R0
C648ELECTROLYTIC CAP. 100µF/10V MCE1AMASDL101
C652ELECTROLYTIC CAP. 1000µF/6.3V MCE0KMASDL102
C653ELECTROLYTIC CAP. 220µF/10V MCE1AMASDL221
C654ELECTROLYTIC CAP. 220µF/10V MCE1AMASDL221
C656ELECTROLYTIC CAP. 100µF/16V MCE1CMASDL101
C657ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C676ELECTROLYTIC CAP. 2.2µF/50V MCE1JMASDL2R2
C681CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C682CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C683CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C684CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C691#SAFTY CAP. 1000pF/250V KXCA2E102MR101
C693#SAFTY CAP. 1000pF/250V KXCA2E102MR101
C723CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C724CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C731CHIP CERAMIC CAP. CH J 39pF/50VCHD1JJ3CH390
C732CHIP CERAMIC CAP. CH J 39pF/50VCHD1JJ3CH390
C733CHIP CERAMIC CAP. CH J 39pF/50VCHD1JJ3CH390
C734CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
C735CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
C736CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
C743CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C744CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C771ELECTROLYTIC CAP. 100µF/16V MCE1CMASDL101
C772CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C775CHIP CERAMIC CAP.(1608) CH J 100pF/50VCHD1JJ3CH101
C776CHIP CERAMIC CAP.(1608) CH J 100pF/50VCHD1JJ3CH101
C801CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C802CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C803CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C804CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C805CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C806CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C807CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C808CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C809CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C810CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C811CHIP CERAMIC CAP.(1608) B K 0.47µF/16VCHD1CK30B474
C815CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
100V J
100V J
100V J
100V J
CA2A473DT018
CA2A683DT018
CA2A152DT018
CA2A222DT018
2009031015-19A91F1EL
Page 92
Ref. No.DescriptionPart No.
C816ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C817CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C818CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C819ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C820CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C821CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C822CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C823ELECTROLYTIC CAP. 1000µF/25V MCE1EMZNDL102
C824CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C825CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C826CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C827ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C828CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C829CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C830CHIP CERAMIC CAP.(1608) B K 0.47µF/16VCHD1CK30B474
C832ELECTROLYTIC CAP. 3.3µF/50V MCE1JMASDL3R3
C833CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C834CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C835CHIP CERAMIC CAP.(1608) B K 2700pF/50VCHD1JK30B272
C836CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C837CHIP CERAMIC CAP.(1608) B K 2700pF/50VCHD1JK30B272
C838CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C839CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C841CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C842CHIP CERAMIC CAP. F Z 1µF/10VCHD1AZ30F105
C843CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C844ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C845CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C846CHIP CERAMIC CAP.(1608) CH J 470pF/50VCHD1JJ3CH471
C847CHIP CERAMIC CAP.(1608) B K 0.1µF/25VCHD1EK30B104
C871CHIP CERAMIC CAP.(1608) B K 3300pF/50VCHD1JK30B332
C872CHIP CERAMIC CAP.(1608) B K 3300pF/50VCHD1JK30B332
C873CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C874CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C875CHIP CERAMIC CAP.(1608) CH J 270pF/50VCHD1JJ3CH271
C876CHIP CERAMIC CAP.(1608) CH J 270pF/50VCHD1JJ3CH271
C877CHIP CERAMIC CAP.(1608) B K 6800pF/50VCHD1JK30B682
C878CHIP CERAMIC CAP.(1608) B K 6800pF/50VCHD1JK30B682
C879CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C880ELECTROLYTIC CAP. 100µF/16V MCE1CMASDL101
C882CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C883CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C884CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
C885CHIP CERAMIC CAP.(1608) B K 2.2µF/10VCHD1AK30B225
JK751JACK SW DIN PCB L DIN-435C(777D)JYEL040YUQ03
JK752JACK RCA PCB L RCA-101S(1)-03JXRL010YUQ12
JK753JACK RCA PCB L RCA-101S(1)-04JXRL010YUQ13
JK754JACK SW RCA PCB L RCA-102F(RD)JYRL010YUQ05
----------
INVERTER ASSEMBLY
Ref. No.DescriptionPart No.
INVERTER ASSEMBLY
Consists of the following:
INVERTER CBA
FUNCTION CBA
IR SENSOR CBA
JUNCTION CBA
INVERTER CBA
Ref. No.DescriptionPart No.
INVERTER CBA
Consists of the following:
CAPACITORS
C1001CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1002CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1003CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1004CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1005CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1006CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1007CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1008CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1009ELECTROLYTIC CAP. 100µF/25V MCE1EMASDL101
C1011CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1012POLYESTER FILM CAP. (PB FREE) 0.0039µF/
C1013CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1014CHIP CERAMIC CAP.(1608) B K 6800pF/50VCHD1JK30B682
C1040CHIP CERAMIC CAP.(1608) B K 0.47µF/10VCHD1AK30B474
C1052ELECTROLYTIC CAP 100µF/100VCE2AMZNDL101
C1053ELECTROLYTIC CAP 100µF/100VCE2AMZNDL101
C1056ELECTROLYTIC CAP 100µF/100VCE2AMZNDL101
C1061CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1062CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1063ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1064CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1065CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1066CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1067ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1068CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1072CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1111CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1112CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1113ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1114CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1115CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1116CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1117ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1118CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1122CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1161CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1162CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1163ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1164CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1165CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1166CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1167ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1168CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1172CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1211CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
C1212CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1213ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1214CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1215CAP CERAMIC HV 15pF/6KV/SL/JCCA1500TE009
100V J
1ESA19751
----------
----------
----------
----------
----------
CA2A392DT018
2009031015-23A91F1EL
Page 96
Ref. No.DescriptionPart No.
C1216CAP CERAMIC (AX) 1500pF/50V/B/KCA1J152TU061
C1217ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C1218CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1222CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1500CERAMIC CAP. 470pF/2KVCA3D471PAN04
C1502CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1550CERAMIC CAP. 470pF/2KVCA3D471PAN04
C1552CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C1600CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1620CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C1702CHIP CERAMIC CAP.(1608) F Z 0.22µF/50VCHD1JZ30F224
C1703CHIP CERAMIC CAP.(1608) F Z 0.22µF/50VCHD1JZ30F224
C1800ELECTROLYTIC CAP. 100µF/25V MCE1EMASDL101
C1801ELECTROLYTIC CAP. 22µF/35V MCE1GMASDL220
C1802CHIP CERAMIC CAP.(1608) B K 0.1µF/50VCHD1JK30B104
C1905# SAFTY CAP. 2200pF/250V KXCA2E222MR101
C1910CAP ELECTROLYTIC 270µF/200VCEA271DYG005
C1930CERAMIC CAP. 1000pF/2KVCA3D102PAN04
C1931# POLYESTER FILM CAP. (PB FREE) 0.001µF/
C1932POLYESTER FILM CAP. (PB FREE) 0.027µF/
C1933POLYESTER FILM CAP. (PB FREE) 0.1µF/100V JCA2A104DT018
C1940CERAMIC CAP. B K 0.01µF/1KVCCD3AKP0B103
C1970POLYESTER FILM CAP. (PB FREE) 0.047µF/
C1981CHIP CERAMIC CAP. F Z 0.01µF/50VCHD1JZ30F103
C1982ELECTROLYTIC CAP. 0.47µF/50V MCE1JMASDLR47
C1990CERAMIC CAP. B K 820pF/1KVCCD3AKP0B821
C1992# ELECTROLYTIC CAP 470µF/100VCE2AMZNDL471
Q1001TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1003TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1004TRANSISTOR KTA1267-GR-AT/PNQS1KTA1267P
Q1005TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1060TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1061TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1110TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1111TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1160TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1161TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1210TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1211TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1500FET MOS 2SK2417(FT)QFWZSK2417FT
Q1501TRANSISTOR 2SC2120-Y(TE2 F T)QQSY2SC2120F
Q1502TRANSISTOR 2SA950-O (TE2 F T)QQS002SA950F
Q1503TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1550FET MOS 2SK2417(FT)QFWZSK2417FT
Q1551TRANSISTOR 2SC2120-Y(TE2 F T)QQSY2SC2120F
Q1552TRANSISTOR 2SA950-O (TE2 F T)QQS002SA950F
Q1553TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1600TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1621TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1800TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1801TRANSISTOR KTA1267-GR-AT/PNQS1KTA1267P
Q1802TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1803TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1804TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1815TRANSISTOR 2SA950-O (TE2 F T)QQS002SA950F
Q1930# FET MOS 2SK3561(Q) IDSS100UAQFWZ2SK3561Q
Q1931# TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1932# TRANSISTOR 2SC2120-Y(TE2 F T)QQSY2SC2120F
Q1970NPN TRANSISTOR KTC3200-GR-AT/PNQSGKTC3200P
Q1971TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
Q1972TRANSISTOR KTC3198-Y-AT/PNQSYKTC3198P
RESISTORS
R1001CHIP RES. 1/10W F 22k ΩRRXAFR5H2202
R1002CHIP RES. 1/10W F 1.0k ΩRRXAFR5H1001
R1003CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1004CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1005RES CARBON FILM T 1/4W J 220k ΩRCX4224T1001
R1006RES CARBON FILM T 1/4W J 56k ΩRCX4563T1001
R1007CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1008CHIP RES. 1/10W J 2.2k ΩRRXAJR5Z0222
R1009CHIP RES. 1/10W J 82k ΩRRXAJR5Z0823
R1010CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1011CHIP RES. 1/10W F 10k ΩRRXAFR5H1002
R1012CHIP RES. 1/10W F 24k ΩRRXAFR5H2402
R1013CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1014CHIP RES. 1/10W F 4.7k ΩRRXAFR5H4701
R1015CHIP RES. 1/10W F 7.50 k ΩRRXAFR5H7501
R1016CHIP RES. 1/10W J 120k ΩRRXAJR5Z0124
R1017CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1018RES CARBON FILM T 1/4W J 1.2k ΩRCX4122T1001
R1019WIRE COPPER 6111-06003-0120XZ40C0SHG002
R1021RES CARBON FILM T 1/4W J 10k ΩRCX4103T1001
R1022CHIP RES. 1/10W F 2.2k ΩRRXAFR5H2201
Ref. No.DescriptionPart No.
R1023CHIP RES. 1/10W F 3.3k ΩRRXAFR5H3301
R1024CHIP RES. 1/10W F 100k ΩRRXAFR5H1003
R1026CHIP RES. 1/10W F 220 ΩRRXAFR5H2200
R1028CHIP RES. 1/10W F 36k ΩRRXAFR5H3602
R1030CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1031CHIP RES. 1/10W J 15k ΩRRXAJR5Z0153
R1032RES CARBON FILM T 1/4W J 24k ΩRCX4243T1001
R1033CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1034CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1035RES CARBON FILM T 1/4W J 3.3k ΩRCX4332T1001
R1036RES CARBON FILM T 1/4W J 10k ΩRCX4103T1001
R1040METAL OXIDE FILM RES. 2W J 0.39 ΩRN02R39ZU001
R1041RES CARBON FILM T 1/4W J 33k ΩRCX4333T1001
R1043RES CARBON FILM T 1/4W J 12k ΩRCX4123T1001
R1044METAL OXIDE FILM RES. 2W J 0.39 ΩRN02R39ZU001
R1060CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1061CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1062CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1063CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1064CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1065RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1066CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1067CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1068CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1069CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1070CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1071RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1072CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1080CHIP RES. 1/10W F 22k ΩRRXAFR5H2202
R1081CHIP RES. 1/10W J 5.6k ΩRRXAJR5Z0562
R1110CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1111CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1112CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1113CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1114CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1115RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1116CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1117CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1118CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1119CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1120CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1121RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1122CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1160CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1161CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1162CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1163CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1164CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1165RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1166CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1167CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1168CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1169CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1170CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1171RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1172CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1210CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1211CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1212CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1213CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1214CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1215RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1216CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
2009031015-25A91F1EL
Page 98
Ref. No.DescriptionPart No.
R1217CHIP RES. 1/10W J 20k ΩRRXAJR5Z0203
R1218CHIP RES. 1/10W J 390 ΩRRXAJR5Z0391
R1219CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1220CHIP RES. 1/10W F 8.2k ΩRRXAFR5H8201
R1221RES CARBON FILM T 1/4W J 27k ΩRCX4273T1001
R1222CHIP RES. 1/10W J 1M ΩRRXAJR5Z0105
R1500CHIP RES. 1/10W J 12k ΩRRXAJR5Z0123
R1501RES CARBON FILM T 1/4W J 10 ΩRCX4100T1001
R1502RES CARBON FILM T 1/4W J 150 ΩRCX4151T1001
R1503RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1504RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1505CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1506CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1550RES CARBON FILM T 1/4W J 12k ΩRCX4123T1001
R1551RES CARBON FILM T 1/4W J 10 ΩRCX4100T1001
R1552RES CARBON FILM T 1/4W J 150 ΩRCX4151T1001
R1553RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1554RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1555CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1556CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1600CHIP RES. 1/10W J 18k ΩRRXAJR5Z0183
R1601CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1620CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R1621CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1630CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1631CHIP RES. 1/10W J 3.3k ΩRRXAJR5Z0332
R1700CHIP RES. 1/10W J 47k ΩRRXAJR5Z0473
R1701CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1800CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R1801CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1802CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1803RES CARBON FILM T 1/4W J 4.7k ΩRCX4472T1001
R1804RES CARBON FILM T 1/4W J 1.2 ΩRCX41R2T1001
R1805RES CARBON FILM T 1/4W J 1.0k ΩRCX4102T1001
R1806CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1807CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1808CHIP RES. 1/10W J 5.1k ΩRRXAJR5Z0512
R1809CHIP RES. 1/10W J 1.5k ΩRRXAJR5Z0152
R1810RES CARBON FILM T 1/4W J 4.7k ΩRCX4472T1001
R1811RES CARBON FILM T 1/4W J 100k ΩRCX4104T1001
R1812RES CARBON FILM T 1/4W J 12k ΩRCX4123T1001
R1930RES CARBON FILM T 1/4W J 47 ΩRCX4470T1001
R1931RES CARBON FILM T 1/4W J 47k ΩRCX4473T1001
R1932RES CARBON FILM T 1/4W J 82 ΩRCX4820T1001
R1933RES CARBON FILM T 1/4W J 82 ΩRCX4820T1001
R1934RES CARBON FILM T 1/4W J 82 ΩRCX4820T1001
R1935RES CARBON FILM T 1/4W J 1.5k ΩRCX4152T1001
R1936RES CARBON FILM T 1/4W J 180 ΩRCX4181T1001
R1937# METAL OXIDE FILM RES. 2W J 0.33 ΩRN02R33ZU001
R1939RES CARBON FILM T 1/4W J 2.2k ΩRCX4222T1001
R1940RES CARBON FILM T 1/4W J 220k ΩRCX4224T1001
R1941RES CARBON FILM T 1/4W J 220k ΩRCX4224T1001
R1942RES CARBON FILM T 1/4W J 180k ΩRCX4184T1001
R1943RES CARBON FILM T 1/4W J 820k ΩRCX4824T1001
R1944RES CARBON FILM T 1/4W J 820k ΩRCX4824T1001
R1945RES CARBON FILM T 1/4W J 390k ΩRCX4394T1001
R1946METAL OXIDE RES. 1W J 47k ΩRN01473ZU001
R1947METAL OXIDE RES. 1W J 47k ΩRN01473ZU001
R1948METAL OXIDE RES. 1W J 47k ΩRN01473ZU001
R1967RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1968RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1969RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1970RES CARBON FILM T 1/4W J 270 ΩRCX4271T1001
Ref. No.DescriptionPart No.
R1971RES CARBON FILM T 1/4W J 3.9k ΩRCX4392T1001
R1972CHIP RES. 1/10W J 68k ΩRRXAJR5Z0683
R1973CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1974CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1975CHIP RES. 1/10W F 30k ΩRRXAFR5H3002
R1976CHIP RES. 1/10W F 30k ΩRRXAFR5H3002
R1977CHIP RES. 1/10W F 27k ΩRRXAFR5H2702
R1979CHIP RES. 1/10W F 6.8k ΩRRXAFR5H6801
R1980CHIP RES. 1/10W F 360 ΩRRXAFR5H3600
R1981CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R1982CHIP RES. 1/10W J 3.3k ΩRRXAJR5Z0332
R1983RES CARBON FILM T 1/4W J 33k ΩRCX4333T1001
R1984RES CARBON FILM T 1/4W J 15k ΩRCX4153T1001
R1986CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1988RES CARBON FILM T 1/4W J 1.0k ΩRCX4102T1001
MISCELLANEOUS
B13HEAT SINK PNA A94F0UH1EM428121
B14HEAT SINK PNB ASSEMBLY A94F0UH1EM428123
BC1301WIRE COPPER 6111-06003-0120XZ40C0SHG002
BC1500COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1501COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1550COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1551COIL BEADS CORE FBR07VA850TB-00LLBF00ZTU020
BC1930BEADS INDUCTOR FBR07HA121SB-00LLBF00STU030
BC1931BEADS INDUCTOR FBR07HA121SB-00LLBF00STU030
L3SCREW B-TIGHT D3X8 BIND HEAD+GBJB3080
T1050# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1100# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1150# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1200# TRANS INVERTER HVT-153LTZ3PZ0XB009
T1950# TRANS POWER BCK-35-0607LTT3PC0XB048
FUNCTION CBA
Ref. No.DescriptionPart No.
FUNCTION CBA
Consists of the following:
----------
CAPACITOR
C108CAP CERAMIC (AX) 0.1µF/50V/F/ZCA1J104TU062
RESISTORS
R108RES CARBON FILM T 1/4W J 220 ΩRCX4221T1001
R109RES CARBON FILM T 1/4W G 10k ΩRCX4103T1002
R111RES CARBON FILM T 1/4W G 4.7k ΩRCX4472T1002
R112RES CARBON FILM T 1/4W G 2.7k ΩRCX4272T1002
R113RES CARBON FILM T 1/4W G 4.7k ΩRCX4472T1002
R114RES CARBON FILM T 1/4W G 8.2k ΩRCX4822T1002
R115RES CARBON FILM T 1/4W G 18k ΩRCX4183T1002
D104LED GREEN 333GT/E(FNA)NPWZ33GTEFNA
D105LED L-53HTNP4Z000L53HT
RESISTORS
R123RES CARBON FILM T 1/4W J 220 ΩRCX4221T1001
R124RES CARBON FILM T 1/4W J 220 ΩRCX4221T1001
R126CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R127RES CARBON FILM T 1/4W J 3.3k ΩRCX4332T1001
R128RES CARBON FILM T 1/4W J 100 ΩRCX4101T1001
CN101242 SERIES CONNECTOR TUC-P08X-B1 WHT STJCTUB08TG002
----------
2009031015-27A91F1EL
Page 100
ELECTRICAL PARTS LIST [ LC320EMX ]
PRODUCT SAFETY NOTE: Products marked with a
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTES:
1. Parts that are not assigned part numbers (---------)
are not available.
2. Tolerance of Capacitors and Resistors are noted
with the following symbols.
C.....±0.25%D.....±0.5%F.....±1%
G.....±2%J......±5%K.....±10%
M.....±20%N.....±30%Z.....+80/-20%
DIGITAL MAIN CBA UNIT
Ref. No.DescriptionPart No.
DIGITAL MAIN CBA UNIT1ESA19845
MPW CBA
Ref. No.DescriptionPart No.
MPW CBA
Consists of the following:
POWER SUPPLY CBA(MPW-1)
JACK CBA(MPW-2)
POWER SUPPLY CBA(MPW-1)
Ref. No.DescriptionPart No.
POWER SUPPLY CBA(MPW-1)
Consists of the following:
CAPACITORS
C201CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C202CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C203CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C204ELECTROLYTIC CAP. 2.2µF/50V MCE1JMASDL2R2
C207CHIP CERAMIC CAP.(1608) B K 0.1µF/16VCHD1CK30B104
C210ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C216CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C217CHIP CERAMIC CAP.(1608) B K 0.1µF/16VCHD1CK30B104
C218CHIP CERAMIC CAP.(1608) B K 1µF/25VCHD1EK30B105
C219ELECTROLYTIC CAP. 47µF/25V MCE1EMASDL470
C221CHIP CERAMIC CAP.(1608) B K 0.01µF/50VCHD1JK30B103
C222ELECTROLYTIC CAP. 470µF/25V MCE1EMASDL471
C223ELECTROLYTIC CAP. 22µF/50V MCE1JMASDL220
C224ELECTROLYTIC CAP. 10µF/50V MCE1JMASDL100
C302CHIP CERAMIC CAP.(1608) F Z 0.1µF/25VCHD1EZ30F104
C303ELECTROLYTIC CAP. 1000µF/6.3V MCE0KMASDL102
C305CHIP CERAMIC CAP.(1608) F Z 0.1µF/50VCHD1JZ30F104
C306ELECTROLYTIC CAP. 1µF/50V MCE1JMASDL1R0
C309CHIP CERAMIC CAP.(1608) CH J 1000pF/50VCHD1JJ3CH102
C310CHIP CERAMIC CAP.(1608) CH J 47pF/50VCHD1JJ3CH470
C311CHIP CERAMIC CAP.(1608) CH J 47pF/50VCHD1JJ3CH470
C501ELECTROLYTIC CAP. 100µF/25V MCE1EMASDL101
C601#CAP METALLIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004
1ESA19752
----------
----------
----------
Ref. No.DescriptionPart No.
C602#CAP METALLIZED FILM 0.47µF/300V K 3.5MM CT2F474DC004
C605CAP ELECTROLYTIC 470µF/200V MCA2D471DYG07
C609POLYESTER FILM CAP. (PB FREE) 0.047µF/
C611CERAMIC CAP. 470pF/2KVCA3D471PAN04
C612POLYESTER FILM CAP. (PB FREE) 0.068µF/