FUNAI 22FL532/10, 26FL552/10, 22FL552/10, 26FL532/10, 32FL532/10 User Manual

...

Contents

UNIT INFORMATION ...................................1

Trademark Information ..............................1

Servicing....................................................1

Cabinet Cleaning.......................................1

Panel Cleaning ..........................................1

Remote Control / TV..................................2

INITIAL SETUP ............................................4

OPERATIONS ..............................................5

Watching a TV Programme .......................5

Favourite ...................................................5

EPG (Electronic Programme Guide) .........5

Sound Select .............................................6

Sleep Timer ...............................................6

Subtitle Settings ........................................6

Teletext Settings........................................6

Switching the Input Mode ..........................6

Recording ..................................................7

Photo Playback .........................................8

PC Format .................................................9

OTHER SETTINGS ....................................10

Channel Settings .....................................10

PC Settings .............................................12

Picture Adjustment ..................................13

Sound Adjustment ...................................14

Time Settings ..........................................15

Lock Settings...........................................16

Hotel Mode Settings ................................17

Setup Adjustment ....................................18

TROUBLESHOOTING GUIDE...................21

SPECIFICATIONS......................................23

UNIT INFORMATION

Trademark Information

• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

• DVB is a registered trademark of the DVB Project.

• The “HD TV” Logo is a trademark of

DIGITALEUROPE.

Servicing

• Should your unit become inoperative, do not try to correct the problem by yourself. There are no userserviceable parts inside. Take the unit to a Service Centre for servicing.

Cabinet Cleaning

• Gently wipe the front panel and other exterior surfaces of the unit with a soft cloth.

• Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.

Panel Cleaning

• If the LCD panel should require cleaning, wipe it with a cotton or soft cloth. Before cleaning the panel, disconnect the power cord.

22FL532/10 22FL552/10 26FL532/10 26FL552/10 32FL532/10 32FL552/10

Remote Control / TV

1. (Power)

Turns the unit on and go into the standby mode.

2. SLEEP (p. 6)

3. Number buttons

Selects the desired channel in TV mode and enters the password in the PIN code input field.

4. EXIT (p. 5)

Returns to the previous display.

5. ▲ / ▼ / ◄ / ► (Cursor) (p. 5)

6. OK

7. MENU (p. 10)

8. AUDIO (p. 6)

9. / (p. 5)

To adjust the volume.

10. (Mute) (p. 5)

11. RED / GREEN / YELLOW / BLUE

Uses for

“EPG (Electronic Programme Guide)” (p. 5) /

“[Programme Edit]” (p. 11).

12. DISPLAY

Display the channel number or input source.

13. SOURCE (p. 6)

14. PICTURE MODE (p. 13)

15. SOUND MODE (p. 14)

16. FAV / FAV (p. 5)

17. FAV (p. 5)

18. EPG

“EPG (Electronic Programme Guide)” (p. 5)

19. (p. 5)

To select a channel.

20. (Play / Pause) / (Skip backward) /

(Skip forward) / (Stop) / (Rewind) /

(Fast-forward)

21. REC (Record)

22. (Subtitle) (p. 6)

23. (Expand) / (Subpage) / (Hold) /

(Text) / (Reveal) / (Index) (p. 6)

7 8

10 11

13719

• VOL. ◄ / ► (Front panel) works the same function as ◄ / ► (cursor) on the menu.

• SOURCE (Front panel) works the same function as OK to

determine the setting menu.

• PROG. ▲ / ▼ (Front panel) works the same function as ▲

/ ▼ (cursor) on the menu.

24. CI slot

25. USB terminal (p. 7, 8)

26. Coaxial digital audio output jack

27. PC (VGA) input jack

28. Audio input jack for PC connection

29. (Aerial) input jack

30. Component video, Composite video and Audio (L/R) input jacks

31. AC power cord inlet

32. SCART jack

33. HDMI (HDMI 1 / HDMI 2) input jack

34. Headphone audio output jack

35. Standby / Power indicator

Lights up red when the unit goes into standby mode. Light off when power is on.

36. Infrared sensor window

Receives the infrared rays transmitted from the remote control.

35 / 36

• Data input from USB flash memory only.

• User should not connect any devices to the USB terminal

such as digital camera, keyboard, mouse, etc. (because these will not work.)

• The software update is, in most cases, handled by an authorised service person or in some circumstances the user may be asked to do the software update themselves.

INITIAL SETUP

This section will guide you through the unit's initial setup which includes selecting a language for your onscreen menu and auto scan, which automatically scans and memorises viewable channels.

1 After making all the necessary connections, turns

on the unit using the main power switch, then

press .

2 Use ◄ / ► to select the location.

Use

▲ / ▼

to select

[OSD Language]

, the

n select

the language you want, using ◄ / ►.

4 Use ▲ / ▼ to select [Auto Tuning], then press

OK.

5 Use ▲ / ▼ to select [Country], then select the

country you want, using ◄ / ►.

6 Use ▲ / ▼ to select [Tune Type], then select

[DTV], [ATV] or both channels, using ◄ / ►.

< For DVB-T scanning >

7 Press OK to start scanning.

< For DVB-C scanning >

7 Use ▲ / ▼ to select [Digital Type], then select

[DVB-C], using ◄ / ►.

8 Use ▲ / ▼ to select [Scan Type], then select

[Standard] or [Advanced], using ◄ / ►.

9 Use ▲ / ▼ to select the item you want, and then

adjust the setting, using ◄ / ►.

10 Press OK to start scanning.

• Select [Home Mode], this unit is set to maximise the energy

efficiency for home setting and it can be adjusted through a choice of picture and sound quality according to your preference.

• Select [Retail Mode], this unit will be set up with predefined

setting for retail displays.

• If you select [Retail Mode], the confirm message will

appear.

First Time Installation

Home Mode

English

OSD Language

Auto Tuning

Standard

Auto Tuning

OK Menu

Auto

Symbol Rate

Auto

Frequency

Auto

Network ID

Scan Type

ATV + DTV

Tune Type

Germany

Country

DVB-T

Digital Type

• Scan confirmation menu will appear.

• In case when not all available cable channels are found

through [Standard] scanning mode, these programs can be scanned by selecting [Advanced] mode. Please note, that [Advanced] mode scanning can take additional time.

• Depending on cable TV provider specification, correct subscription to cable signals cannot be guaranteed.

• When the scanning is completed, the lowest memorised digital or analogue channel will be displayed.

• If you press MENU during channel scanning, this operation will be paused, then press MENU again to exit the initial setup.

Standard

Auto Tuning

OK Menu

Auto

Symbol Rate

Auto

Frequency

Auto

Network ID

Scan Type

ATV + DTV

Tune Type

Germany

Country

DVB-C

Digital Type

OPERATIONS

Watching a TV Programme

To select a channel

Use repeatedly to select your desired channel, or use the Number buttons to enter a channel number, then press OK for quicker access. (e.g.) If you want to select the channel 24 without pressing OK, press 2 first, then press 4 within 3 seconds.

To adjust the volume

Use / to adjust the audio volume. Press to turn on or off the sound right away.

Favourite

You can easily find a favourite channel.

1 Press FAV while watching a programme to show

the favourite channel list.

2 Use ▲ / ▼ to select the channel you want, then

press OK.

3 Press EXIT to exit.

EPG (Electronic Programme Guide)

For Digital TV operation

You can easily find a channel or see the detailed channel information. EPG gives you scheduled information of the TV programme.

1 Press EPG and use ▲ / ▼ to select a channel.

2 Press EPG to exit.

Read this first

These operations are accessible by remote control. Some may also be accessible by controls on the main unit.

• You can recover the original volume by pressing again

or / .

• You can set favourite channel at “[Programme Edit]” (p. 11).

• Use FAV / to select the favourite channel while

watching a programme.

• Use ◄ / ► to move to the previous or next page.

OK Fav Menu

Delete Move Skip

Favorite List

DTV

[Record] (RED) :

Press to call up record list. You can choose the time of the appointment to record you want.

[Display] (GREEN) :

Press to display the detail information about the programme.

[Schedule] (YELLOW) :

Press to see the setting you have done before.

[Remind] (BLUE) :

Press to set the time you want to remind the programme you want to see.

• When the time appointment is conflict, it will produce a warning message.

Record

Move View

Display

Next Day

Schedule

Prev Day

Remind

Jan

No Information

PROGRAMME GUIDE

Sound Select

For Digital TV operation

Press AUDIO to display currently selected audio language with the number of available ones and press repeatedly to cycle through them.

For Analogue TV operation

Press AUDIO to display currently selected audio mode and press repeatedly to cycle through the available audio mode. (e.g.)

Sleep Timer

The sleep timer can be set the unit to go to the standby mode after an incremental period of time.

1 Press SLEEP repeatedly to change the sleep

time period.

Subtitle Settings

You can change the subtitle settings used for TV programmes.

1 Press (Subtitle) repeatedly to change the

subtitle language.

Teletext Settings

You can change the teletext settings used for TV programmes.

1 Press (Text) to turn on the teletext decoder.

2 Press (Text) repeatedly to show the teletext in

transparent mode.

3 Press EXIT to turn off the teletext decoder.

Switching the Input Mode

You can switch the input mode to TV mode or external input mode.

1 Press SOURCE .

2 Use ▲ / ▼ to select the input mode you want,

then press OK.

Dolby Digital sound

Dolby Digital Plus sound

HE-AAC sound

no icon :

MPEG sound

NICAM STEREO Mono

NICAM MONO Mono

Stereo Mono

DUAL I DUAL II

Mono

• Each time you press SLEEP, the timer increases from

10 minutes up to 240 minutes.

• Press SLEEP repeatedly until [Off] appears to cancel the

sleep timer.

• If the unit goes into standby mode, the sleep timer will be cancelled.

NICAM DUAL I NICAM DUAL II Mono

• To enlarge fonts, press .

• To select the teletext subpages, press .

• To directly select the page numbers shown at the bottom of

the TV screen, use RED / GREEN / YELLOW / BLUE.

• To call up the hidden information, press .

• To hold the current page, press .

• To go back to the start page, press .

• [Component] will be displayed if you connected

component video cables to this unit.

HDMI2

HDMI1

SCART

Component

ATV

DTV

Media

Input Source

Recording

This unit can record a TV programme. Use a USB flash memory for saving the data.

1 Press SOURCE to display the input mode

and use ▲ / ▼ to select [DTV], then press OK.

Record

2 Select the channel you want, then press REC to

start recording the current programme.

3 Press to stop the recording.

Playback

2 Press (index) to call up the recorded list.

3 Use ▲ / ▼ to select the desired file, then press

OK to start the playback.

Operation in Playback Press OK to display the menu.

4 Press SOURCE and select input mode you

want to exit this mode.

Before you begin

You must connect the USB flash memory to USB terminal of this unit (shown below) and select [DTV] at [Input Source]. Refer to “Switching the Input Mode” (p. 6).

• The USB flash memory is not supplied with this unit.

• The unit recognise a USB flash memory only.

Do not use a USB hub and an extension cord between the USB flash memory and the unit. Always connect the USB flash memory to this unit directly.

• We do not guarantee the all USB flash memory can be supported on this unit.

• When you stop the recording, it will return to normal broadcast television.

• When the storage space of Disk is shortage, it will appear a warning message. Then it stops recording automatically and return to normal broadcast television.

Play FB FF Prev. Next Pause Stop

Press to play or pause the playback.

/ :

Press to rewind or fast-forward the playback. Every press on / will rewind or fast-forward faster up to five.

/ :

Press to skip backward or forward the file.

Press to stop the playback.

EXIT:

Press to disappear the menu during the menu appears.

Recorded List

OK Index

Delete Skip

Programme

Photo Playback

This unit can play JPEG picture files. Use the USB flash memory contains the files.

1 Press SOURCE to display the input mode

and use ▲ / ▼ to select [Media], then press OK.

2 Press OK to enter [PHOTO], and select [C], then

press OK to enter.

3 Use ▲ / ▼ / ◄ / ► to select the desired file, then

press OK.

4 Press OK to display the menu during the

slideshow.

Operation in Slideshow

5 Press SOURCE and select input mode you

want to exit this mode.

Before you begin

You must connect the USB flash memory to USB terminal of this unit (shown below) and select [Media] at [Input Source]. Refer to “Switching the Input Mode” (p. 6).

• The USB flash memory is not supplied with this unit.

• The unit recognise a USB flash memory only.

Do not use a USB hub and an extension cord between the USB flash memory and the unit. Always connect the USB flash memory to this unit directly.

• We do not guarantee the all USB flash memory can be supported on this unit.

Return

PHOTO

Delete

Return

Exit

PHOTO

• Use ◄ / ► to select [Zoom In] or [Zoom Out] and press OK.

The zoom factor: 1x, 2x and 4x

• Use ◄ / ► to select [Playlist] and press OK to display the list.

• Use ◄ / ► to select [Info.] and press OK to display the information.

• Use ◄ / ► to select [Move View] and press OK to move the picture, if the picture big enough to surpasses the screen.

Press to play or pause the slideshow.

/ :

Press to skip backward or forward the file.

Press to stop the slideshow.

[Repeat] (YELLOW) : Press to select the repeat mode; [Repeat None], [Repeat 1] or [Repeat All] in order.

[Rotate] (►) :

Every press on ► will turn the picture clockwise by 90 degrees.

EXIT:

Press to go back to the previous screen.

+ 16 hidden pages

FUNAI 22FL532/10, 26FL552/10, 22FL552/10, 26FL532/10, 32FL532/10 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual