Fujitsu UTY-RNRYZ1, UTY-RNRGZ1, UTY-RNRXZ1 Operating Manual

UTY-RNRYZ1
UTY-RNRGZ1
UTY-RNRXZ1

PART NO. 9380859079

REMOTE CONTROLLER (WIRED TYPE)

[Original instructions]

OPERATING MANUAL

WIRED REMOTE CONTROLLER

Keep this manual for future reference.

BEDIENUNGSANLEITUNG

KABEL-FERNBEDIENUNG

Bewahren Sie dieses Handbuch für eine spätere Bezugnahme auf.

MODE D’EMPLOI

TÉLÉCOMMANDE FILAIRE

Conservez ce manuel pour pour toute référence ultérieure.

MANUAL DE FUNCIONAMIENTO

MANDO A DISTANCIA CON CABLE

Conserve este manual para posibles consultas futuras.

MANUALE DI ISTRUZIONI

UNITÀ DI CONTROLLO A FILO

Conservare questo manuale per consultazione futura.

ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ

ΕΝΣΥΡΜΑΤΟ ΤΗΛΕΧΕΙΡΙΣΤΗΡΙΟ

Διατηρήστε το παρόν εγχειρίδιο για μελλοντική αναφορά.

MANUAL DE FUNCIONAMENTO

CONTROLO REMOTO COM FIOS

Guarde este manual para consulta futura.

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

ПРОВОДНОЙ ПУЛЬТ ДИСТАНЦИОННОГО УПРАВЛЕНИЯ

Сохраните данное руководство для последующего использования.

KULLANIM KILAVUZU

KABLOLU UZAKTAN KUMANDA

Bu kılavuzu ileride başvurmak üzere saklayın.

使用说明书

有线遥控器

使用产品前请仔细阅读本使用说明书

请保留本说明书以供今后参考

EnglishDeutsch

Français

Español

Italiano

EλληvIkά

Português

Русский

Türkçe

中 　 文

OPERATING MANUAL

PART NO. 9380859079
WIRED REMOTE CONTROLLER

3-8 Initial Setting (for administrator).........................17

3-8-1 Language Setting ................................................... 17

3-8-2 Date Setting ...........................................................17

3-8-3 Temp. Unit Setting ..................................................18

3-8-4 R.C.Group Name Setting .......................................19

3-8-5 R.C. Sensor Setting ...............................................19

3-8-6 Password Setting ...................................................19

3-8-7 Display Item Setting ...............................................20

3-9 Maintenance (for administrator)......................... 20

3-9-1 Error History ........................................................... 21

3-9-2 Setting Status List ..................................................21

3-9-3 Filter Sign Reset ..................................................... 21

3-9-4 Version ................................................................... 21

4 OPERATIONTIPS

4-1 Selectable Modes (for VRF system) ................... 22

4-1-1 Heat recovery system ............................................22

4-1-2 When indoor units is connected for cooling only in

heat recovery system ............................................. 22

4-1-3 RB priority connection in heat recovery system .....22

4-1-4 Heat pump system .................................................22

4-1-5

Outdoor unit priority connection in heat pump system

... 22

4-2 Verication screen when setting is complete .. 22

4-3 Settable temperature range ................................ 22

5 OTHERS

5-1 Outline Dimensions ............................................. 23

5-2 Specications ....................................................... 23

5-3 Error Code ............................................................. 23

Contents

INTRODUCTION

■

SAFETY PRECAUTIONS .............................................. 3

■

SYSTEM OUTLINE ........................................................ 3

1 Terminology .................................................................... 3

2 Password conguration .................................................. 4

3 Name of parts ................................................................. 4

1 MONITOR

1-1 Monitor .................................................................... 5

1-1-1 Monitor mode screen ...............................................5

1-1-2 Status display ...........................................................5

1-1-3 Child Lock ................................................................6

1-1-4 Emergency Stop....................................................... 6

2 CONTROL

2-1 On and Off ............................................................... 7

2-2 Operation Settings ................................................. 7

2-2-1 Set the Operation Mode ........................................... 7

2-2-2 Set the Temperature .................................................7

2-2-3 Set the Fan Speed ...................................................7

3 SETTING

3-1 Select the Setting Items ........................................ 8

3-2 Air Flow Direction Setting ..................................... 8

3-2-1 VT Air Flow Direction ................................................ 8

3-2-2 HZ Air Flow Direction ...............................................8

3-2-3 Individual VT Hold .................................................... 8

3-3 Timer Setting .......................................................... 9

3-3-1 On Timer ..................................................................9

3-3-2 Off Timer...................................................................9

3-3-3 Auto Off Timer ........................................................10

3-4 Weekly Timer Setting (for administrator) ...........11

3-4-1 Enable Schedule .................................................... 11

3-4-2 Schedule Setting .................................................... 11

3-4-3 Day Off Setting .......................................................12

3-5 Special Setting ......................................................13

3-5-1 Economy ................................................................13

3-5-2 Set Temp. Auto Return (for administrator) ............. 13

3-5-3 Set Temp. Range Setting (for administrator)..........14

3-5-4 Anti Freeze (for administrator) ...............................14

3-5-5 Human Sensor Setting (for administrator) ............. 14

3-5-6 Fan Control for Energy Saving

(for administrator) ...................................................15

3-6 Summer Time (Daylight Saving Time) Setting

(for administrator) .................................................15

3-7 Preference (for administrator) .............................15

3-7-1 Panel Calibration ....................................................16

3-7-2 Backlight Setting ....................................................16

3-7-3 Contrast Setting .....................................................17

En-1

En-2

1-1-1

2-2-1

3-2

3-3

3-5

3-4

3-6

3-7

2-2-2

2-2-3

1-1-2

3-1

26.0

°C

3-7-1

3-7-2

3-7-3

3-5-1

3-5-2

3-5-4

3-5-3

3-5-5

3-5-6

3-9-1

3-9-2

3-9-3

3-9-4

♦
♦

♦

♦

♦

♦

3-8-1
3-8-2

3-8-3

3-8-4

3-8-5

♦
3-8-6

3-8-7

♦

♦

1 3

26.0

°C

Cool

Auto

Set Temp.

Mode

MenuStatus

Fan

Fri 10:00AM

3-8

3-9

Status

Air Flow Direction

VT

Off

1 3

Off

HZ

Economy

Individual

Anti Freeze

Page 1/ 4

Monitor

Next
Page

Error
Information

Set Temp.

Cancel OK

Mode

Cancel

Cool Dry Heat

Fan

OK

Auto

Monitor

Next
Page

Page 1/ 2

Main Manu

Air Flow Direction
Setting

Weekly Timer
Setting

Timer Setting

Special Setting

Monitor

Previous
Page

Page 2/ 2

Main Manu

Summer Time
Setting

Initial Setting Maintenance

Preference

Back

On Timer [Disable]

[Disable]

[Disable]

Off Timer

Auto Off Timer

Timer Setting

Back

Next
Page

Page 1/ 3

Initial Setting

Language Setting Date Setting

R.C. Group
Name Setting

Temp. Unit
Setting

Back

Next
Page

Previous

Page

Page 2/ 3

Initial Setting

R.C. Secsor
Setting

Password Setting

Master Indoor
Unit Setting

Display Item
Setting

Back

Next
Page

Page 1/ 3

Maintenance

Error History

Setting
Status List

Version

Filter Sign
Reset

Previous
Page

Back

Next
Page

Page 2/ 3

Maintenance

Test Run

R.C. Address
Setting

Function Setting

I.U. Address
Verification

Back

Previous
Page

Page 3/ 3

Maintenance

Initialization

Installer Password
Change

Summer Time Setting

Cancel OK

Enable

Disable

Back

Preference

Panel
Calibration

Backlight
Setting

Contrast

Back

Special Setting

Set Temp.
Range Setting

Set Temp.
Auto Return

Anti Freeze

Economy

Next
Page

Page 1/ 2

Back

Previous
Page

Page 2/ 2

Special Setting

Human Sensor
Setting

Fan Control for
Energy Saving

Back

Previous
Page

Page 3/ 3

Initial Setting

RC Master/
Slave Setting

I.U. Display
Number Setting

• Under Maintenance

• Forced Stop

• Mode Mismatch

Previous
Page

Status

R.C. Prohibition

Special State

Page 2/ 4

Monitor

Next
Page

Error
Information

• Op. Controlled

• Set Temp. Limited

• Energy Saving Operation

• Defrost

• Oil Recovery

Status

Special State

Page 3/ 4

Monitor

Previous
Page

Error
Information

Next
Page

02-01

14,15, 41, 44

Error Information

Page 1/ 5

Address

Error Code

Back

Next
Page

• Human Sensor Setting

• Fan Control for Energy Saving

Status

Special State

Page 4/ 4

Monitor

Previous
Page

Error
Information

Back

Enable Schedule [None]

[None]

[None]

Schedule Setting

Day Off Setting

Weekly Timer Setting

Air Flow Direction Setting

Back

VT HZ
Setting Setting

Individual VT Hold

Fan

Auto

Cancel OK

Screen structure

♦:For installer

INTRODUCTION

■

SAFETY PRECAUTIONS

• The “SAFETY PRECAUTIONS” indicated in the manual
contain important information pertaining to your safety. Be
sure to observe them.

WARNING

This mark indicates procedures
which, if improperly performed,
might lead to the death or serious
injury of the user.

In the event of a malfunction (burning smell, etc.), imme­diately stop operation, turn off the electrical breaker, and
consult authorized service personnel.

Do not repair or modify any damaged cable by yourself. Let
the authorized service personnel to do it. Improper work
will cause an electric shock or a re.

When moving, consult authorized service personnel for
uninstallation and installation of this unit.

Do not touch with wet hands. It may cause an electric
shock.

If children may approach the unit, take preventive mea­sures so that they cannot reach the unit.

Do not repair or modify by yourself. It may cause a fault or
accident.

Do not use ammable gases near the unit. It may cause a
re from leaking gas.

Dispose of the packing materials safely. Tear and dispose
of the plastic packing bags so that children cannot play with
them. There is the danger of suffocation if children play
with the original plastic bags.

This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capa­bilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.

CAUTION

This mark indicates procedures
which, if improperly performed,
might possibly result in personal
harm to the user or damage to
property.

Do not set vessels containing a liquid on this unit.
Doing so will cause heating, re or electric shock.

Do not expose this unit directly to water. Doing so will
cause trouble, electric shock or heating.

Do not place electrical devices within 1 m (40 in) of this
unit. It may cause malfunction or failure.

Do not use re near this unit or place a heating apparatus
nearby. It may cause malfunction.

Do not touch the switches with sharp objects. Doing so will
cause injury, trouble, or electric shock.

Do not insert articles into the slit parts of this unit. Doing so
will cause trouble, heating, or electric shock.

■

SYSTEM OUTLINE

1 Terminology

System related terms (♦ is for VRF system)
(a) VRF system ♦:

VRF (Variable Refrigerant Flow) is a large multi system
that effectively air conditions a wide variety of spaces
from large buildings to personal residences.

(b) Other system:

Multi or single type air conditioning system other than
VRF system.

(c) Heat recovery system ♦:

The indoor unit connects to the outdoor unit via an RB
unit in this system. RB units of single type and 4-system
multi type are available . Indoor units connected to RB
units of a different system perform cooling operation
and heating operation simultaneously. An indoor unit
connected to an outdoor unit without going through an
RB unit are for cooling only.

(d) Heat pump system:

This is standard system. Indoor units connected to the
same outdoor unit do not perform cooling operation and
heating operation simultaneously.

(e) RB Group [for heat recovery system] ♦:

A group of indoor units connected to a single type RB
unit or each system of a multi type RB unit. Cooling op­eration and heating operation are not performed simul­taneously in an RB Group.

(f) R.C. Group (Remote Controller Group):

This forms a group by connecting indoor units by
remote controller cable. One unit of ungrouped indoor
unit makes up an R.C. Group. It is the minimum unit of
operation.

(g) Refrigeration system:

This is a system composed of indoor units and outdoor
units connected by the same refrigerant piping.

(h) System ♦:

This is 1, 2 or more refrigerant systems connected by
the same transmission cable.

(i) Central controller ♦:

A central remote controller can control multiple R.C.
Groups. There is a system controller, Touch panel con­troller, and a central remote controller.

(j) Standard remote controller:

A standard remote controller is a remote controller
which controls 1 R.C. group. This unit corresponds to
this. This unit cannot be used together with a 3-wire
type wired remote controller. A wireless remote control­ler can be used together with this unit.

Address related terms
(k) Indoor unit address ♦:

This is an ID individually assigned to each indoor unit.

(l) Remote controller address:

This is an ID individually assigned separately from the
indoor unit address to indoor units which form an R.C.
Group.

En-3

2 Password conguration

This unit can set the following 2 kinds of passwords:
(a) Password

This is a password for administrator. Password is re­quested by the setting which requires management. For
a description of password setting and change, refer to
[3. SETTING] →[3.8 Initial Setting]→[3-8-6 Password
Setting] .

(b) Installer password

This password is requested for important settings at
installation.

Note

If you forget your password, contact your local dealer.

3 Name of parts

(a)

(b)

(c)

(d)

(a) Touch panel display

• When the screen is touched or the On/Off button is
pressed while backlight is set to Enable, backlight
lights. Backlight goes off 30 or 60 seconds after the
last operation. When backlight is set to Disable, it does
not light. For a description of backlight setting, refer to
[3 SETTING]→[3-7 Preference]→[3-7-2 Backlight Set­ting].

• Lightly touch the touch panel with your nger tips. A
commercially available stylus pen can also be used.
If pushed with too much force or operated with a
rod, pencil, or ballpoint pen, etc., the display may be
scratched or damaged.

• Do not touch 2 or more places simultaneously. Correct
operation cannot be performed.

• When cleaning the touch panel display, setting child
safety lock prevents erroneous operation. (Refer to
[1 MONITOR] → [1-1 Monitor] → [1-1-3 Child Lock].)
When cleaning, do not use detergent or alcohol, paint
thinner, etc. It will cause accidents or loss of appear­ance.

(b) LED lamp (Power indicator)

Lights while the indoor unit is operating. Blinks when an

error is generated.
(c) On/Off button
(d) Room temperature sensor (inside)

Setting is necessary to use this sensor. Refer to [3

SETTING] → [3-8 Initial Setting] → [3-8-5 R.C. Sensor

Setting].

En-4

1MONITOR

1-1 Monitor

1-1-1 Monitor mode screen

Monitor mode screen is the home screen of this unit.

26.0

°C

Cool

Auto

Office

Set Temp.

26.0°C

Mode

MenuStatus

Fan

Fri 10:00AM

Room Temp.

(i)

(c)

(e)

(f)

(d)(a) (i)

(i) (g)(h)

(b)

(a) R.C. group name:

Name of the remote controller group to which this unit is

connected. Refer to [3 Setting] → [3-8 Initial Setting] →

[3-8-4 R.C.Group Name Setting].
(b) Clock:

Refer to [3 SETTING] → [3-8 Initial Setting] → [3-8-2

Date Setting].
(c) Mode:

When this is touched, the display switches to the “Mode”

screen. Refer to [2 CONTROL] → [2-2 Operation Set-

tings] → [2-2-1 Set the Operation Mode].
(d) Set temp.:

When this is touched, the display switches to the tem-

perature setting screen. Refer to [2 CONTROL] → [2-2

Operation Settings] → [2-2-2 Set the Temperature].
(e) Fan:

When this is touched, the display switches to the fan

speed setting screen. Refer to [2 CONTROL] → [2-2

Operation Settings] → [2-2-3 Set the Fan Speed].
(f) Room temp.:

The ambient temperature sensed by this unit is dis-

played. Refer to [3 SETTING] → [3-8 Initial Setting] →

[3-8-7 Display Item Setting].
(g) Menu:

When this is touched, the display switches to the “Menu”

screen. Refer to [3 SETTING].
(h) Status:

When this is touched, the display switches to the “Status”

screen. Refer to [1-1-2 Status display].
(i) Status icons:

An error occurred. Refer to [1-1-2 Status display] →
< Error Information screen >.

Operation from this unit is prohibited by the Central
Controller. Refer to [1-1-2 Status display].

Mode mismatch. The mode which cannot operate
simultaneously is selected. Refer to [1-1-2 Status
display].

The On Timer, Off Timer, or Auto Off Timer is set.
Refer to [3 SETTING] → [3-3 Timer Setting].

The weekly timer is set. Refer to [3 SETTING] →
[3-4 Weekly Timer Setting].

The set temperature automatic return setting is set.
Refer to [3 SETTING] → [3-5 Special Setting] →
[3-5-2 Set Temp. Auto Return].

It shows that it is time to clean the lter. Refer to
[3 SETTING] → [3-9 Maintenance] → [3-9-3 Filter
Sign Reset].

The temperature sensor of this unit is used. Refer
to [3 SETTING] → [3-8 Initial Setting] → [3-8-5 R.C.
Sensor Setting].

For the screen display other than Chinese, this product uses
a Bitmap font made and developed by Ricoh Company, Ltd.

1-1-2 Status display

The remote controller and indoor unit setting status are dis­played.

Touch the [Status] on monitor
mode screen. “Status” screen is
displayed.

26.0

°C

Cool

Auto

Set Temp.

Mode

MenuStatus

Fan

Fri 10:00AM

The “Status” screen has 2, 3 or 4 pages which are switched
by touching the [Next Page] or [Previous Page]. When the
[Monitor] is touched, the display returns to the monitor mode
screen.
(*: Items that indoor unit does not support are not displayed.)

< Page 1 >

Status

Air Flow Direction

VT

Off

1 3

Off

HZ

Economy

Individual

Anti Freeze

Page 1/ 4

Monitor

Next
Page

• Air Flow Direction*:
The air ow direction setting is displayed. The setting will
appear only for indoor units which can set air ow direc­tions.
“Individual” is displayed only when this remote control­ler is connected to the indoor unit which supports the
appropriate function. When setting is performed, [✓] is
displayed. Refer to [3 Setting]→[3-2 Air Flow Direction
Setting]→[3-2-3 Individual VT Hold].

• Economy:
ON or OFF of the economy setting is displayed.

• Anti Freeze*:
ON or OFF of the anti freeze setting is displayed.

< Page 2 >

• Under Maintenance

• Forced Stop

• Mode Mismatch

Previous
Page

Status

R.C. Prohibition

Special State

Page 2/ 4

Monitor

Next
Page

• R.C. Prohibition:
The functions whose operation from this unit and Wireless
type remote controller is prohibited by the Central Control­ler are displayed by icons. The contents of each icon are
as follows:

:All operations :On and Off

:On :Mode setting

:Temperature setting :Timer setting

:Filter sign reset

En-5

When you try to operate or set the
prohibited function, the following
screen is displayed and operation
or setting is not possible. When
the [Close] is touched, the display
returns to the screen before opera­tion was performed.

Setting is prohibited.

Close

< Page 2 (to 3 or 4) >

• Op. Controlled

• Set Temp. Limited

• Energy Saving Operation

• Defrost

• Oil Recovery

Status

Special State

Page 3/ 4

Monitor

Previous
Page

Next
Page

• Human Sensor Setting

• Fan Control for Energy Saving

Status

Special State

Page 4/ 4

Monitor

Previous
Page

• Special State (Page 2, 3 or 4)
The indoor unit status is displayed. When the contents to
be displayed exceeds 3, they are displayed on the next
page (Page 3 or 4). The status contents are as follows:
(Only items that indoor unit supports or operating items
are displayed.)

Under Maintenance:
Indoor unit is inspected. Indoor unit operation is stopped
during this time.

Forced Stop:
Indoor unit is stopped forcibly by external input.

Mode Mismatch:
A mode which cannot be operated simultaneously with a
master indoor unit or other operating indoor unit is set in
the same RB group of a heat recovery system or in the
same refrigerant system of a heat pump system. In this
case, since the mode is switched to the fan mode, reset
to a mode that can be operated simultaneously. Refer to
[4 OPERATION TIPS]→[4.1 Selectable Modes] for the
modes which can be operated simultaneously.

Operation Controlled:
This content is displayed at the Slave indoor unit when
Master indoor unit is set in the refrigerant system or RB
Group to which this unit is connected. When a Master
indoor unit is not set, this shows that there is already
another indoor unit operating. Only a mode set by Master
indoor unit or a mode that can be operated simultaneously
with another operating indoor unit can be selected. Refer
to [4.OPERATION TIPS] for the modes which can be oper­ated simultaneously.

Set Temp. Limited:
Indoor unit temperature setting is limited by the Central
controller.

Energy Saving Operation:
The energy saving is set by the Energy Manager for Sys­tem Controller.

Defrost:
At heating operation, the outdoor unit performs Defrost
operation. The indoor unit fan is stopped during this time.

Oil Recovery:
The outdoor unit performs oil recovery operation. The
indoor unit fan may be stopped during this time.

Human Sensor Setting:
This function is enabled. Refer to [3 Setting]→[3-5 Special
Setting]→[3-5-5 Human Sensor Setting].

Fan Control for Energy Saving:
This function is enabled. Refer to [3 Setting]→[3-5 Special
Setting]→[3-5-6 Fan Control for Energy Saving].

< Error Information screen >

[Error Information] is displayed only when there is an error
history. When the [Error Information] is touched, the display
switches to “Error Information” screen. Refer to [5-3 ERROR
CODE] for the errors.

Status

Air Flow Direction

VT

Off

1 3

Off

HZ

Economy

Individual

Anti Freeze

Page 1/ 4

Monitor

Next
Page

Error
Information

02-01

14,15, 41, 44

Error Information

Page 1/ 5

Address

Error Code

Back

Next
Page

1-1-3 Child Lock

When this screen is displayed by
touching the monitor mode screen,
the unit is in child safety lock.

Child Lock ValidChild Lock Valid

• Child safety lock set/reset:
Press the On/Off button for 4 seconds or more while
touching an area outside the operation section of the moni­tor mode screen (no response even if touched). Set/reset
can be performed even while the indoor unit is stopped.
The setting cannot be performed at screens other than the
monitor mode screen.

26.0

°C

Cool

Auto

Set Temp.

Mode

MenuStatus

Fan

Fri 10:00AM

1-1-4 Emergency Stop

This screen is displayed when the
system was emergency stopped by
operation from the outside. When
emergency stop is reset, the moni­tor mode screen is displayed.

Emergency Stop

En-6

2CONTROL

2-1 On and Off

(1) Press the [On/Off] button.

26.0

°C

Cool

Auto

Set Temp.

Mode

MenuStatus

Fan

Fri 10:00AM

On/Off button

LED lamp

The LED lamp remains lit while the indoor unit is operat­ing.

Note

The On/OFF button cannot be operated at screens other
than the monitor mode screen.

2-2 Operation Settings

2-2-1 Set the Operation Mode

(1) Touch the [Mode] on the monitor mode screen.
(2) “Mode” screen is displayed. Select the operation mode.

(1) (2)

26.0

°C

Cool

Auto

Set Temp.

Mode

MenuStatus

Fan

Fri 10:00AM

Mode

Cancel

Cool Dry Heat

Fan

OK

Auto

Notes

• Only selectable modes are displayed. The selectable
modes may be different depending on the system con­guration and operation status. Refer to [4.OPERATION
TIPS]→[4-1 Selectable modes].

• When the “Fan” is selected, the
temperature cannot be set.

Fan

Auto

Set Temp.

Mode

MenuStatus

Fan

Fri 10:00AM

• When “Auto” is selected at “Master Indoor Unit”, “(Auto)”
is displayed at the monitor mode screen of Slave Indoor
Unit.

• When the operation mode is switched in a heat recovery
system, operation preparations may take some time, but
this is not a malfunction.

(3) When the [OK] is touched, the display returns to the

monitor mode screen.

2-2-2 Set the Temperature

(1) Touch the [Set Temp.] on the monitor mode screen.
(2) “Set Temp.” screen is displayed. Adjust the room tem-

perature with the [

] or [ ].

(1) (2)

26.0

°C

Cool

Auto

Set Temp.

Mode

MenuStatus

Fan

Fri 10:00AM

26.0

°C

Set Temp.

Cancel OK

Notes

• The settable temperature range is different depend­ing on the operation mode. Refer to [4 OPERATION
TIPS]→[4-3 Selectable Temperature Range].

• When the “Set Temp. Range Setting” is set, the select­able temperature conforms to the setting. Refer to [3
SETTING] → [3-5 Special Setting] → [3-5-3 Set Temp.
Range Setting].

(3) When the [OK] is touched, the display returns to the

monitor mode screen.

2-2-3 Set the Fan Speed

(1) Touch the [Fan] on the monitor mode screen.
(2) “Fan” screen is displayed. Select the fan speed with the

[

] or [ ].

(1) (2)

26.0

°C

Cool

Auto

Set Temp.

Mode

MenuStatus

Fan

Fri 10:00AM

Fan

Cancel OK

Auto

(3) When the [OK] is touched, the display returns to the

monitor mode screen.

En-7