Fujitsu T850 User Manual

PRIMERGY T850

System Configurator and Order Information Guide

October 2003

Contents

Instructions Configuration diagram Configurator

0 System software I Basic unit II Processor III Memory IV Graphics V Accessible drives VI Hard disk drives VII SCSI / Fibre Channel controller VIII Disk Array IX Communication / Network X System Management Products (RemoteView) XI Miscellaneous XII PCI Extension Box XIII SCSI / Fibre Channel controller for PCI Extension Box XIV Disk Array for PCI Extension Box XV Communikation / Network for PCI Extension Box XVI Communikation / Network for PCI Extension Box

Change report

PRIMERGY Server

System configurator and order-information guide

PRIMERGY T850 Status 2003-09-23

Instructions

This document contains basic product and configuration information that will enable you to configure your system via

PC-/ SystemArchitect.

Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete

PRIMERGY Rack system.

You can configure your individual PRIMERGY server in order to adjust your specific requirements.

The System configurator is divided into several chapters that are identical to the current price list and PC-/ SystemArchitect.

Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through

the configurator by following the lines from the top to the bottom.

Section

In one chapter you can only select as many components (here 4x) as the arrow indicates.

Please note that there are information symbols which indicate necessary information.

Further information in the internet see:

http://www.primergy.com

(internet)

http://extranet.fujitsu-siemens.com/primergy

(extranet)

Prices and availability see price list and PC-/ SystemArchitect.

Subject to change and errors excepted.

X times

III

S26361-XXX-XXX S26361-XXX-XXX

Memory XXX MB Memory XXX MB

max. X times per system max. X times per system

Memory, example

There are X memory slots which can be equipped with XXX MB. It is permissible to make up to X passes through the memory upgrade options.

Fujitsu Siemens Computers

Enterprise Products - PRIMERGY Server

2 of 18

System configurator and order-information guide

PRIMERGY T850 Status 2003-09-23

Configuration diagram PRIMERGY T850

Xeon MP

Extension slots

Graphics ( IV )

SCSI controller ( VII )

1st PS

2nd PS

Disk array ( VIII )

Communikation/Network ( IX )

Hot-plug 1+1 (redundant) Power Supply

3.5"x0.5"

5.25"x0.5"

RemoteServiceBoard

hot plug

SCSI-drive

TOP VIEW FRONT/REAR VIEW

System unit ( I )

1st System Board

1234567

9101112131415

2nd System Board

1234567

9101112131415

Processor ( II ) Memory ( III ) Processor ( II ) Memory ( III )

Two Power Supplies included

6 PCI-X -slots, 1 slot occupied by RSB

PCI-X long 64 Bit / 133 MHz hot-plug 1050W at 220V or 525W at 110V each

PCI-X long 64 Bit / 133 MHz hot-plug

PCI-X long 64 Bit / 100 MHz hot-plug Floppy disk DVD

PCI-X long 64 Bit / 100 MHz hot-plug

PCI-X long 64 Bit / 66 MHz hot-plug Accessible drives ( V )

(PCI-X long 64 Bit/66 MHz hot-plug)

Hard disk drives ( VI )

3.5"x1" 3.5"x1"

Fujitsu Siemens Computers

Enterprise Products - PRIMERGY Server

3 of 18

System configurator and order-information guide

Start "PRIMERGY T850"

PRIMERGY T850 Status 2003-09-23

http://www.primecluster.com

http://vil.mch.fsc.net/vil/pc/vil/primergy/overview/prince/index_en.htm

for internal users:

http://vil.mch.fsc.net/vil/oec/special/primergy/index_en.htm

for partners:

http://vilpart.fujitsu-siemens.de/vil/oec/special/primergy/index_en.htm

SW Configurator

with OEM-Software without OEM-Software

for PRIMERGY Server for PRIMERGY Server

Later use of OEM operating system

Vmware-Software the use of OEM-software apart from OEM software by

- ESX Server 1.5 (OEM) under ESX. VMware and F5

- ESX Server 2.0 (OEM)(planned) Distributions-/ retailware is

- Virtual SMP for ESX 2.0 (OEM) allowed.

For all SW products listed below please refer to the corresponding software configurator accessible via the Extranet under "PC Configurations, Configurator for PRIMERGY SW", URL see below.

MS - Software: W **) PRIMECLUSTER *)

- Windows 2000 Server - Clustering

- Windows 2000 Advanced Server - Load Balancing

- Windows 2000 Data Center Server (only for certified systems)

- Windows Server 2003, Linux - Software: **) Standard Edition - SuSE Linux Enterprise Server: S Enterprise Edition - SuSE Professional Linux

CITRIX-Software für NT: W1

- Multiuser SW MetaFrame LoadBalancing Additional User Licences

Microsoft does not allowe software is not allowed,

- Red Hat Enterprise Linux

- Red Hat Professional Linux

MultiPath, Duplex Data easy Mirror for Linux Manager for NT; W2K; Linux NT 4, WIN 2000

FSC System Management Software: V *) Pay attention to release information on datasheet under

- RemoteView Software

- RemoteView Service Board

- RemoteView Diagnosis

Backup-Software: U

- ARCserve for NT

You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:

Continue with PRIMERGY HW configurator

**) Pay attention to release and order information in PRINCE -> Operating System

Enterprise Products - PRIMERGY Server

Fujitsu Siemens Computers

4 of 18

System configurator and order-information guide

Start PRIMERGY T850

PRIMERGY T850 Status 2003-09-23

Section

Basic unit

System unit consisting of: * 4U rack mountable housing incl. 2 hot plug power supply modules redundant

- temperature sensor for CPU module and FSC PDA function

* 4 hot replace fans

* Drives / Bays

- 1 drive bay 3.5“/0.5“ high (occupied by 1 floppy disk

- 1 drive bay 5.25"/0.5" high (occupied by 1 DVD-ROM)

- 2 bays for 1“ hard disks

- 6 slots PCI-X 64 Bit (2x 133 MHz, 2x 100 MHz, 2x 64 MHz, (1x occupied by 1 RemoteView serviceboard)

Systemboard, to upgrade to 4 or up to 8 processors with:

- 2x Xeon processors, 100 MHz quad-pumped FSB

- 2-channel U160 SCSI controller on-board

- graphics processor on board 8 MB (PCI)

- LAN Controller 10/100/1000 on-board

- Fast-IDE controller (for DVD-ROM)

- RemoteView Serviceboard in a PCI slot

External Interfaces:

- 1x RS-232-C (serial, 9 pin)

- 1x keyboard (PS/2)

- 1x mouse (PS/2)

- 1x VGA (15 pin)

- 3x USB UHCI (1x front side)

- 1x LAN RJ45

- 3x SMP Interconnect

- 1x PCI extension

- 1x SCSI U160 (UHD68)

Cables:

1. IDE cable for CD/DVD

2. U160 SCSI cable for connection of the HD backplane

3. Power cord

Software:

- ServerStart packet incl. ServerBooks CD, ServerSupport CD and ServerView

Mounting kit for PRIMERGY T850 is part of the basic unit

- 1 pair of telescopic rails (710-815mm)

- 1 pair of carrier rails

- 1 bracket PC-Rack

- 1 cable management PC-racks

Mounting kit for mounting of servers in in FSC 19" PRIMECENTER- racks and all server racks conforming to EIA standard EIA-310-D for 19" racks. Therefore the mounting kit is variable in deepth from 710-815mm

Fujitsu Siemens Computers

Enterprise Products - PRIMERGY Server

5 of 18

System configurator and order-information guide

PRIMERGY T850 Status 2003-09-23

Rack Basic Unit (4U), 8-way Rack Basic Unit (4U), 4-way

including 2x Xeon MP processor including 2x Xeon MP processor 2 system boards 1 system board upgradable to 8 CPUs upgradable to 4 CPUs

S26361-K846-V815 1,5 GHz / 1MB S26361-K846-V415 1,5 GHz / 1MB S26361-K846-V819 1,9 GHz / 1MB S26361-K846-V419 1,9 GHz / 1MB S26361-K846-V820 2,0 GHz / 2MB S26361-K846-V420 2,0 GHz / 2MB

16-way Upgrade S26361-F2738-L308

Requires two Rack Basic Units Ugrade System Board fully equipped with 8 prcessors each. without processor Only available after Special Release enables upgrade to 8 CPUs is granted. max. 1x per system For Windows 2000 Datacenter or VMware 1.5 only. If two system boards are installed, both have

S26361-F2738-E316 to be equipped with processors and memory

The 16-way configuration is only available on request of an Special Release.

PRIMECENTER Rack

SNP:SY-F1647E301-P "Rack-mounting ex factory" Installation ex works for one This service is to be ordered once server or subsystem. per installable server/storage Hereby the rack will be delivered subsystem, in order to get the completely pre-mounted and server/storage subsystem all wired connections are tested. mounted into the PRIMERGY racks.

With racks 12U, 24U, 38U: In case of the 46 U PRIMERGY Rack, Systems and components this service has to be ordered, will be delivered installed in the rack to get the mounting kits and the With racks 46U: cables installed. Systems and components will be delivered separately To be ordered only together with a PRIMERGYPRIMECENTER rack e.g.: S26361-K826-V10x

refer configurator PC-Rack

max. 1x per System

Fujitsu Siemens Computers

Enterprise Products - PRIMERGY Server

6 of 18

+ 12 hidden pages