Fujitsu Stylistic Q509 operation manual

S T Y L I S T I C

User Manual

STYLISTIC Q509

Copyright

Fujitsu Limited has made every effort to
ensure the accuracy and completeness of this
document. However, as ongoing development
efforts are continually improving the capabilities
of our products, we cannot guarantee the
accuracy of the contents of this document. We
disclaim liability for errors, omissions or future
changes.

STYLISTIC is a trademark of Fujitsu Limited.

Microsoft, Windows, MS and Windows 10
are registered trademarks of the Microsoft
Corporation of the United States in the United
States and other countries.

Copyright

Other product names are trademarks or
registered trademarks of their respective
companies.

Copyright© Fujitsu Limited 2019. All rights
reserved. No part of this publication may be
copied, reproduced or translated, without the
prior written consent of Fujistu Limited. No part
of this publication may be stored or transmitted
in any electronic form without the written
consent of Fujitsu Limited.

This device complies with Part 15 of the FCC
rules. Opeartions are subject to the following
two conditions:

Phoenix is a registered trademark of Phoenix
Technologies Corporation of the United States.

ExpressCard™ module technology is a
registered trademark of Personal Computer
Memory Card International Association.

Copyright© 2019 Microsoft Corporation, All
rights reserved.

Copyright© 2019 Phoenix Technologies, Ltd.,
All rights reserved.

DECLARATION OF CONFORMITY

according to FCC Part 15

(1) This device may not be allowed to cause

harmful interferance.

(2) This device must accpet any interference

recevied, inclusding interference that may
cause indesired operation.

The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing, LLC in the United States and other
countries.

Website: http://hk.fujitsu.com/pc

i

IMPORTANT SAFETY
INSTRUCTIONS

Read these instructions carefully. Save these

1.
instructions for future reference.

Follow all warnings and instructions marked

2.
on the product.

3.

Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for
cleaning.

Do not use this product near water.

4.

Do not place this product on an unstable

5.
cart, stand or table. The product may drop,
causing serious damage to the product.

6.

Slots and openings in the cabinet and the
back or bottom are provided for ventilation;
to ensure reliable operation of the product
and to protect it from overheating, these
openings must not be blocked or covered.
The openings should never be blocked by
placing the product on a bed, sofa, rug or
other similar surface. This product should
never be placed near or over a radiator
or heat register or in a built-in installation
unless proper ventilation is provided.

This product should be operated from the

7.
type of power indicated on the marking
label. If you are not sure of the type of power
available, consult your dealer or local power
company.

Do not allow anything to rest on the power

8.
cord. Do not locate this product where
persons will walk on the cord.

If an extension cord is used with this product,

9.
make sure that the total ampere rating of the
equipment plugged into the extension cord
does not exceed the extension cord ampere
rating. Also make sure that the total rating of
all products pugged into the wall outlet does
not exceed 15 amperes.

Never push objects of any kind into this

10.
product through cabinet slots as they may
touch dangerous voltage points that could

result in a re or electric shock. Never spill

liquid of any kind on the product.

Do not attempt to service this product

11.
yourself, as opening or removing covers
may expose you to dangerous voltage points

or other risks. Refer all servicing to qualied

service personnel.

Unplug this product from the wall outlet and

12.

refer servicing to qualied service personnel

under the following conditions:

a.

When the power cord or plug is damaged
or frayed.

b.

If liquid has been spilled into the product.

c.

If the product has been exposed to rain or
water.

If the product dose not operate normally

d.

when the operating instructions are
followed. Adjust only those controls that
are covered by the operating instructions
since improper adjustment of other controls
may result in damage and will often require

extensive work by a qualied technician to

restore the product to normal condition.

e.

If the product has been dropped or the
cabinet has been damaged.

f.

If the product exhibits a distinct change in
performance, indicating a need for service.

ii

CAUTION: When replacing the

13.

battery, be sure to install it with the
polarities in the correct position.
There is a danger of explosion if the
battery is replaced with an incorrect
type or is mistreated. Do not
recharge, disassemble or dispose of
in fire. Replace only with the same
or equivalent type recommended
by the manufacturer. Dispose of
the used battery according to the
manufacturer’s instructions.

Use only the proper type of power cord

14.
set(provided in the accessories box)
for this unit. It should be detachable
type and with respective certification.
Maximum length is 15 feet (4.6 meters).

Copyright

iii

Changes or modifications not expressly
approved by Fujitsu could void this user’s
authority to operate the equipment.

FCC NOTICES

Notice to Users of Radios and Television

These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the
equipment and receiver.

• Connect the equipment into an outlet that is

on a different circuit than the receiver.

• Consult the dealer or an experienced radio/
TV technician for help.

Shielded interconnect cables must be employed
with this equipment to ensure compliance with
the pertinent RF emission limits governing this
device.

Notice to Users of the US Telephone Network*

Your Stylistic maybe supplied with an internal
modern which complies with Part 68 of the FCC
rules. On this Tablet PC is a label that contains
the FCC Registration Number and the Ringer
Equivalence Number(REN) for this equipment

among other information. If requested the user
must provide their telephone company with the
following information:

1. The telephone number to which the
Tablet PC is connected.

2. The Ringer Equivalence Number(REN)
for this equipment.

3. That the equipment requires a standard
modualar jack type USOC RJ-11C which
is FCC Part 68 compliant.

4. The FCC Registration Number.

This equipment is designed to be connected
to the telephone network or premises wiring
using a standard modular jack type USOC
RJ-11C which is FCC Part 68 68 compliant
and a line cord between the modem and the
telephone network with a minimum of 26AWG.

The REN is used to determine the number
of devices that you may connect to your
telephone line and still have all of those
devices ring when your number is called. Too
many devices on one line may result in failure
to ring in response to an incoming call. In
most, but not all, areas the sum of the RENs

of all of the devices should not exceed ve(5).

To be certain of the number of devives you
may connect to your line, as determined by the
RENs, contact your local telephone company.

If this equipment causes harm to the
telephone network your telephone company
may discontinue your service temporarily. If
possible, they will notify you in advance. If
advance notice is not practical they will notify
you as soon as possible. You will also be
advised of your right to file a complaint with
the FCC.

This fax modem also complies with fax branding
requirements per FCC Part 68.

Your telelphone company will probably ask
you to disconnect this equipment from the
telephone network until the problem is
corrected and you are sure that the equipment
is not malfunctioning.

*For model with modern only

iv

Copyright

This equipment may not be used on telephone
provided by your telephone company. Connection
to party lines is subject to state tariffs. Contact
your state’s public utility commission, public
service commission or corporation commission for
more information.

This equipment includes automatic dialing capability.
When programming and/or making test calls to
emergency numbers:

• Remain on the line and briey explain to the

dispatcher the reason for the call.

• Perform such activities in off-peak hours,
such as early morning or late evening.

FCC rules prohibit the use of non-hearing aid
compatible telephones in the following locations
or applications:

• All public or semipublic coin-operated or
credit card telephones.

• Elevators, highways, tunnels ( automobile,
subway, railroad or pedestrian) where a
person with impaired hearing might be
isolated in an emergency.

• Places where telephones are specifically
installed to alert emergency authorities
such as fire, police or medical assistance
personnel.

• Hospital rooms, residential health care
facilities, convalescent homes and prisons.

• Workstations for the hearing impaired.

• Hotel, motel or apartment lobbies.

• Stores where telephones are used by patrons
to order merchandise.

• Public transportation terminals where telephones
are used to call taxis or to reserve lodging or
rental cars.

• In hotel and motel rooms as at least ten percent
of the rooms must contain hearing aid
compatible telephones or jacks for plug-in
hearing aid compatible telephones which will
be provided to hearing impaired customers
on request.

DOC (INDUSTRY CANADA)
NOTICES

Notice to Users of Radios and Television

This Class B digital apparatus meets all
requirements of the Canadian Interference
Causing Equipment Regulations.

Notice to Users of the Canadian Telephone
Network*

The Canadian Industry Canada label
identifies certified equipment. This certification
means that the equipment meets certain
telecommunications network protective,
operational, and safety requirements. The
Department dose not guarantee the equipment
will operate to the user’s satisfaction.

Stylistic is supplied with an internal modem
complies which complies with the Industry
Canada certification standards for
telecommunication network protection and safety
requirements. Before connecting this equipment
to a telephone line the user should ensure
that it is permissible to connect this equipment
to the local telecommunication facilities. The
user should be aware that compliance with the

certication standards does not prevent service

degradation in some situations.

Repairs to telecommunication equipment should
be made by a Canadian authorized maintenance
facility. Any repairs of alterations not expressly
approved by Fujitsu or any equipment failures
may give the telecommunication company
cause to request the user to disconnect the
equipment from the telephone line.

The connecting arrangement code for this
equipment is CA11A.

The Load Number assigned to each telephone
terminal device denotes the percentage of the
total load to be connected to a telephone loop
or circuit which is used by the device to prevent
overloading. The termination on a loop may
consist of any combination of devices such
that the total of the load numbers of all devices
does not exceed 100.

* For model with modem only

v

ENERGY STAR®

Compliance

Notice to Users of Radios and
Television

certication a time of publication). Your Fujitsu

system is an ENERGY STAR ® qualified
mobile PC. By choosing a computer with
the latest energy saving technology, you’re
helping to preserve our environment for future
generations. ENERGY STAR is a joint program
of the U.S. Environmental Protection Agency,
U.S. Department of Energy, Natural Resources
Canada, and other governments around the
world helping us save money while protecting
the environment through energy efficient
products and practices. With energy costs and
global warming top-of-mind for consumers,
Fujitsu is committed to offering solutions that
help consumers conserve energy and improve
the quality of our environment.

Sleep Mode:

You will notice that your computer is initially set
so that the display turns off after no more than
10 minutes of user inactivity, and the computer
goes into system sleep mode after no more
than 30 minutes of user inactivity. When going
into Sleep mode, the computer also reduces the
speed of any active Ethernet network links. To
“wake” the computer from Sleep mode, press
the Suspend/ Resume Button.

Energy saving benets:

Fujitsu ENERGY STAR qualified mobile PCs
use about half as much electricity as standard
equipment – saving half inutility costs. But
more than that, ENERGY STAR also makes a
difference for the environment. Did you know
that the average house can be responsible
for twice the greenhouse gas emissions as
the average car? That’s because every time

you ip on a light switch, run your dishwasher,

or turn on your PC, you use energy, which
means more greenhouse gas emissions from
power plants. So the more energy we can
save through energy efficiency, the more we
help to reduce greenhouse gases and the
risks of global warming. To learn more about
the important ENERGY STAR program, visits:
www.energystar.gov.

(The following is pending

vi

For safety, users should ensure that the
electrical ground of the power utility, the
telephone lines and the metallic water
pipes are connected together.
Users should NOT attempt to make such
connections themselves but should contact
the appropriate electric inspection authority
or electrician. This may be particularly
important in rural areas.

UL Notice

This unit requires an AC adapter to operate. Use
only UL Listed Class 2 adapter, output rating
12VDC, 3A. Refer to the illustration below for the
correct AC Adapter output polarity:

To reduce the risk of fire, use only #26
AWG or larger telecommunications line
cord.

Copyright

For Authorized Repair Technicians Only

For continued protection against risk of re,

replace only with the same type and rating
fuse.

Danger of ecplosion if Lithium (CMOS)
battery is incorrectly replaced. Replace
only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer’s instruction.

Proper Disposal of Battery

Under federal, state or local law, it may be illegal
to dispose of batteries by putting them in the
rubbish bins or trash cans. Please take care of
our environment and dispose of batteries properly
for details regarding recycling or disposing of
unwanted batteries.

Operation Temperature: 35°C

.

vii

NOTE ON USE REQUIRED HIGH
SAFETY

Notice to Users of Radios and Television

This product is designed and manufactured
for general use, household use and ordinary
industrial use.

This product is not designed for or intended for
use under dangerous (fatal) conditions, unless
extreme safety precautions are impemented.

Do not use this product without implementing
high-level safety precautions.

Failure to follow this waring may result in death.
personal injury, severs physical damage or
other loss, if used in or near any or more of the
following:

• nuclear reaction control system in a nuclear
facility

• automatic ight control system in an airplane
or other ight control system

• mass transport control system

• medical instruments for life support system

• missile launching control for weapon system

NOTE ON BACKUP DATA

Please make a backup of the Operating
System, any software programs, and created

les (and update regularly).

If you send this product to Fujitsu, or any of
its affiliates, suppliers, service providers or
resellers for repair, Fujitsu does not guarantee
the data integrity. It is your responsibility to
back data up beforehand.

Fujitsu dose not assume any obligation for
compensation for damages, data integrity,
or restoration, etc., if your data is lost for any
reason, execpt as written in the warranty.

viii

Table of Contents

GETTING TO KNOW YOUR
STYLISTIC

Locating the Controls and Connectors

Top and Side Panel Components ....................

Bottom and Side Panel Components ..............

Right Side Panel Components ........................

Left Side Panel Components ...........................

Contents

1

Troubleshooting

2
3

Identifying the Problem ..............................

4

18

STYISTIC Q509 with Optional Accessories

Cradle..............................................................

Slim Keyboard.................................................

Running the Tablet PC on its Battery

Recharging the Battery....................................

Running the Tablet on its Battery......................

Low Battery Condition.....................................

Using the Stylus Pen

Setting the Pen ...............................................

Using the Integtraed Digitizer .........................

USING YOUR STYLISTIC

Power Sources

Connecting the AC Adapter ............................

Starting Your Tablet PC

Power On ......................................................

Boot Sequence ...............................................

Warranty Registering for Your

Fujitsu STYLISTIC Q509................................

Power Management

Power/Suspend/Resume Button ....................

Suspend Mode ...............................................

Hibernation (Save-To-Disk) Feature ...............

Windows Power Management ........................

Power Off .......................................................

NOTE:
A copy of STYLISTIC User Manual is

5

located in your Microsoft Windows OS or

6

you can nd it in Fujitsu website at

http:hk.fujitsu.com/pc.

You can use this STYLISTIC User’s

7

Manual to nd out more information about

8

the functions and features of your tablet

9

PC.

10
12

13

14
14

14

15
15
16
17
17

ix

Getting to Know Your STYLISTIC

Locating the Controls and Connectors

The following is a brief description of the top and
side features of the Fujitsu STYLISTIC Q509.

1
2
3

54

(This picture is for illustration purpose only and may look different from the actual unit)

Top and Side Panel Components

1.

Ambient Light Sensor

2.

Webcam

3.

Webcam Status LED

4.

Docking Connector

5.

LCD Display

1

1
2

3

9

4 4

(This picture is for illustration purpose only and may look different from the actual unit)

Bottom and Side Panel Components

Rear Webcam Flash

1.

Rear Webcam

2.

Rear Webcam Status LED

3.

Built-in Microphone

4.

Shortcut Button

5.

Volume Button

6.

Power Button

7.

Pen/ Pen Garage

8.

Fingerprint Sensor

9.

5 6

7 8

2

Getting to Know Your STYLISTIC

1

(This picture is for illustration purpose only and may look different from the actual unit)

Right Side Panel Components

1.

Pen Tether Hole

3

1 2 3 4

(This picture is for illustration purpose only and may look different from the actual unit)

Left Side Panel Components

5 6

7

Pen Tether Hole

1.

Audio Combo Jack

2.

Micro SD and Slot

3.

USB 3.1 (Gen 1) Connector

4.

4

USB 3.1 (Gen 1) Type-CTM Connector

5.

Battery Charging Indicator

6.

DC-in

7.

Getting to Know Your STYLISTIC

STYLISTIC Q509 with Optional Accessories

Cradle*

3

4

5

6

1

(This picture is for illustration purpose only and may look different from the actual unit)

Front and Back Side Panel Components

7

2

8

Release Button

1.
To release the Tablet PC from the cradle.

*Optional Accessory

USB 3.1 (Gen 1) Connector

2.

USB 3.1 (Gen 1) Connector

3.

VGA Port

4.

HDMI Port

5.

LAN Port

6.

Kensington Lock

7.

DC Power Jack

8.

5

Slim Keyboard*

1

2

(This picture is for illustration purpose only and may look different from the actual unit)

Front and Back Side Panel Components

Release Button

1.
To release the Tablet PC from the keyboard.

*Optional Accessory

Touchpad

2.
Used as a substitute for a mouse sensor.

Keyboard

3.

3

6

Running the Tablet PC on its
Battery

Recharging the battery

Connect the AC adapter to your Tablet PC. The
moment you connect the AC adapter to your
Tablet PC, the Tablet PC begins to charge the
internal standard battery. The Indicator LED
turns on.

•

Before using the supplied battery
for the very first time after purchase,
remember to charge it fully. If a
charged battery has not been charged
for more than a month, charge it fully
before using it.

•

When the battery is fully charged, the
Status Indicators turn off.

Getting to Know Your STYLISTIC

•

When the battery is 90% or more
charged, it cannot be recharged even if
the AC adapter is connected. The battery
can be recharged when its power level(i.e.
remaining battery life) is 89% or less.

•

When a Tablet PC is turned off, all
indicators on the status LED go off
immediately if the battery is completely

•

charged.

The chargeability of the battery degrades
when it is used in an extremely hot or cold

•

place.

When the battery is very hot, for example
immediately after long usage of the Tablet
PC, the battery protection feature may
be activated to prevent the battery from
being recharged. When the temperature
decreases, the Tablet PC automatically
begins to charge the battery.

7

Running the Tablet PC on its Battery

This section describes the steps to run the Tablet
PC on its internal standard battery.

•

Disconnect the AC adapter from your Tablet PC
and press the power button.

Power Button

•

The power level of the battery
decreases faster when it is used in cold
place.

The chargeability of the battery

•

decreases after it has been used over
a long period of time. If the battery runs
down very fast, replace it with a new
battery.

8

Low Battery Condition

When the battery is discharged to a very low
level, connect the AC adapter to your Tablet PC
immediately to recharge the battery.

•

The use of a weak battery may result
in lost of data you are currently working
on. When the battery runs low, connect
the AC adapter to your Tablet PC as
soon as an external power source is
available or immediately save the data
you are working on, exit all application
and turn off the Tablet PC.

•

Accessing data on the hard disk
consumes a lot of power. Therefore
when the battery is weak, connect an
AC adapter to the Tablet PC before
accessing data on the hard disk.

If a battery is weak and there is no

•

system activity, the Tablet PC may
go into standby(i.e. suspend) mode.
However, if there is system activity,
the Tablet PC will go into standby
mode only after the system activity has
completed its processing.

•

The Tablet PC will go into standby
mode when the indicator reaches 3%.
This is the default setting if the Tablet
PC.

Getting to Know Your STYLISTIC

9

Using the Stylus Pen*

You can use the pen on your Tablet PC as an
electronic writing implement to select items
and to navigate through menu options and
programs. Programs that support handwriting
recognition also allow you to write characters
directly on the screen with the pen. You can
also use the pen as a drawing tool.

The Tablet PC pen is retained securely in the
pen garage. This ensures that the pen cannot
be lost, regardless of the whether you use the
Tablet PC as or transport it while travelling.
Always replace the pen in its garage when you
are not using it.

The Tablet PC is supplied with a pen cord which
you can attach to the eyelets on the pen and on
the Tablet PC.

* Only specific stylus pen can be used in

STYLISTIC Q509.

Eyelet for Pen Tether

Pen Button

The pen of your Tablet PC is an electronic
instrument which can be damaged if used
incorrectly. Handle the pen with care. The
following list contains guidelines for proper
pen handling:

• Do not gesture with the pen.

• Do not use the pen as a pointer.

• Never use the pen on any other surface
than the screen of your Tablet PC.

• Do not try to turn the thumb grip on the
pen.The thumb grip is used to place the
pen in its slot and to take it out of the slot.

• Never store the pen with the lip bearing
the weight of the pen(e.g. with the tip
down in a pen holder). If the pen is
stored with the tip pointing down, this
may have an adverse effect on the
pen mechanism(particularly under high
temperatures). In this case the pen tip
may react as though it is constantly
being pressed down, To avoid damage,
the pen should be stored in the pen slot
when not in use.

The pen can be inuenced by electromagnetic
elds(cursor quivers or jumps). There may

be a few areas on the screen where the
cursor quivers slightly in spite of pressing

the pen down rmly.

Pen Tip

Only use the pen provided with your

•
Tablet PC, Do not use substitute pen
tips that were not specially designed
for your Tablet PC. Replace the stylus
tip if it is worn. The warranty does not
cover a scratched screen.

While writing, you should take care not

•
to scratch the surface of the display.
(e.g. with a wrist watch or bracelet.)

Fujitsu STYLISTIC Q509 Pen

10

The screen responds to entries made with the

tip of the nger or the pen is in direct contact

with the screen.

You can use the pen to perform all the
functions for which you would otherwise use
a mouse. In addition, you can conveniently
delete handwritten pen entries using the pen.

The pen does not support erasing function.

Setting the Pen

Getting to Know Your STYLISTIC

Handling

Selecting menu
entries

Starting programs

Moving
objects/windows

Opening a context
menu

Moving the cursor

Mouse

Click with the left mouse button.

Double click with the left mouse
button.

Drag with the left mouse button
held pressed.

Click with the right mouse button.

-

Pen

Touch the menu entry with the
pen tip.

Briefly touch the program icon
twice with the pen tip.

Place the pen tip directly on the
object/window. Hold the pen
tip pressed against the screen.
Move the desired object/window.

Touch the desired element with
the pen and leave the pen on the
element fo ra moment.

Hover the pen tip on the screen.

11

Using the Integrated Digitizer

The integrated Digitizer allows you to use
the included pen as pointing device. You can
use the pen to click, double-click, drag items
and icons, or to draw like a pen or pencil in
applications that support this behavior, such
as drawing or painting programs. See the
documentation that came with your application
for details.

Clicking

To left-click, touch the object you wish to select
and then lift the pen tip immediately.

To right-click, press the pen button on the
barrel or touch the pen to the screen for a
couple of seconds until the right mouse icon
appears at the tip.

Using the pen with the screen

To avoid potential scratching and damage,
never use anything but the included pen
with the display.

Double-clicking

To double-click, touch the item twice, and then
immediately remove the pen tip.

Double-clicking the screen

•

If the interval between taps is too long,
the double-click will not be executed.

•

Parameters for the Touch Screen can
be adjusted from the Mouse Properties
dialog box located in the Windows
Control Panel.

12

Power Sources

Your Fujitsu STYLISTIC Q509 has two possible
power sources: a primary Lithium ion battery
and an AC adapter.

DC Power Plug

AC Adapter

AC Cable

Connecting the AC Adapter

Connecting the AC Adapter

The AC adapter provides power for operating
your Tablet PC and Charging the batteries.

Connecting the AC Adapter

1. Plug the DC output cable into the DC-in of
your Tablet PC.

2. Plug the AC adapter into an AC electrical
outlet.(Above Figure)

Using Your STYLISTIC

DC Output Cable

Switching from AC Adapter Power to Battery
Power

1. Be sure that you have a charged battery
installed.

2. Remove the AC adapter.

The Lithium ion battery is not charged
upon purchase. Initially, you will need to
connect the AC adapter to use your Tablet
PC.

13

Starting Your Tablet PC

Power On

The Power/Suspend/Resume button is used
to turn on your Fujitsu STYLISTIC Q509 from
its off state. Once you have connected your
AC adapter or charged the internal Lithium Ion
Battery, you can power on your Tablet PC.

When you turn on your Tablet PC be sure
you have a power source. This means that
a battery is installed and charged, or that the
AC adapter is connected and has power.

Press the Power/Suspend/Resume button to
start your system. When you are done working
you dcan either leave your Tablet PC in Standby
mode, or you can turn it off.

When the system display is closed, the
Suspend/Resume button is disabled. This
feature prevents the system from being
accidentally powered up when not in use.

When you Power On your Tablet PC, it will
perform a Power On Self test(POST) to check
the internal parts and configuration for correct
functionality. If a fault is found, your Tablet
PC will emit an audio warning and/or an error
message will be displayed. Depending on the
nature of the problem, you may be able to
continue by starting the operating system or by
entering the BIOS setup utility and revising the
settings.

After satisfactory completion of the Power On
Self Test(POST), your Tablet PC will load your
operating system.

Boot Sequence

The procedure for starting-up your Tablet PC
is termed the Bootup sequence and involves
your Tablet PC’s BIOS. When your Tablet PC
is first turned on, the main system memory
is empty, and it needs to find instructions to
start up your Tablet PC. This information is
in the BIOS program. Each time you power
up or restart your Tablet PC, it goes through
a boot sequence which displays a Fujitsu
logo until your operating system is loaded.
During booting, your Tablet PC is performing a
standard boot sequence including a Power On
Self Test (POST). When the boot sequence
is completed without a failure and without a
request for the BIOS Setup Utility, the system
displays the operating system’s opening
screen.

The boot sequence is executed when:

• You turn on the power to your Tablet PC.

• You restart your Tablet PC from the
Windows Shut Down Dialog box.

• The software initiates a system restart.
Example: When you install a new
application.

• You reset the system by pressing the
three keys [Ctrl+Alt+Del].

Warranty Registering for Your
Fujitsu STYLISTIC Q509

How do I register?

You can register your STYLISTIC by going to
our website:

http://ww3.fujitsu-pcap.com.hk/SUP/

Never turn off your Tablet PC during the
Power On Self Test (POST) or it will cause
an error message to be displayed when you
turn your Tablet PC on the next time.

14

Power Management

Your Fujitsu STYLISTIC has many options and
features for conserving battery power. Some
of these features are automatic and need no
user intervention, such as those for the internal
modem. However, others depend on the
parameters you set to best suit your operating
conditions, such as those for the display
brightness. Internal power managements for
your Tablet PC mat be controlled from settings
made in your operating system, pre-bundled
power management application, or from
settings made in BIOS setup utility.

Besides the options available for conserving
battery power, there are also some things that
you can do to prevent your battery from running
down as quickly. For example you can create
as appropriate power saving profile, put your
Tablet PC into Suspend mode when it is not
performing as operation, and you can limit the
use of high power devices. As with all mobile,
battery power computers, there is a trade-off
between performance and power savings.

Power/Suspend/Resume Button

When your STYLISTIC is active, the Power/
Suspend/Resume button can be used to
manually out your Tablet PC into Suspend
mode. Push the Power/Suspend/Resume
button when your Tablet PC is active, but not
actively accessing anything , and immediately
release the button. You will hear two short
beeps* and your system will enter Suspend
mode.

Using Your STYLISTIC

Suspend Mode

Suspend or Standby mode in Windows
saves the contents of your STYLISTICs
system memory during periods of inactivity by
maintaining power to critical parts. This mode
will turn off the CPU, the display, the hard drive,
and all of the other internal components except
those necessary to maintain system memory
and allow for restarting. Your Tablet PC can be
put in Suspend mode by:

• Pressing the Power/Suspend/Resume
button when your system is turned on.

• Selecting Standby from the Windows Shut
Down menu.

• Timing out from lack of activity.

• Allowing the battery to reach the Dead
Battery warning condition.

Your STYLISTICs system memory typically
stores the file on which you are working you
are working, open application information, and
any other data required to support operation
from Suspend mode, your Tablet PC will return
to the point where it left off. You must see the
Power.Suspend/Resume button to resume
operation, and there must be as adequate
power source available, or your Tablet PC will
not resume.

If your STYLISTIC is suspended, pushing the
Power/Suspend/Resume button returns your
Tablet PC to active operation. You can tell
whether the system is Suspended by looking at
the Power indicator. If the indicator is visible and

not ashing, your Tablet PC is fully operational.
If the indicator is visible and  ashing, your

notebook is in Suspend mode. If the indicator is
not visible, the power is off or your Tablet PC is
in Hibernation mode.

* Only applicable for some models

(See Hibernation Feature)

15

Hibernation (Save-To-Disk) Feature

•

If you are running your STYLISTIC
on battery power, be aware that the
battery continues to discharge while
your Tablet PC is in Suspend mode,
though not as fast as when fully
operational.

•

Disabling the Power/Suspend/Resume
button prevents it from being used to
put your STYLISTIC in Suspend or
Hibernation(Save-to DIsk) mode. The
resume function of the button cannot
be disabled.

•

The suspend or hibernation(Save-to

-Disk) mode should not be used with
certain PC cards. Check your PC Card
documentation for more information.
When PC Cards or external devices
are in use, Hibernation(Save-to-Disk)
mode cannot return to the exact state
prior to suspension, because all of the
peripheral devices will be re-initialized
when the system restarts.

•

If your STYLISTIC is actively accessing
information when you enter the
Suspend or Hibernate (Save-to Disk)
mode, changes to open files are not

lost. The les are left open and memory

is kept active during Suspend mode
or the memory is transferred to the
internal hard drive during hibernation
mode.

The main advantage of using the

•

Hibernation(Save-to-Disk) function is
that power is not required to maintain
your data. This is particularly important
if you wil be leaving your STYLISTIC
in a suspended state for a prolonged
period of time. The drawback of using
Hibernation mode is the it lengthens the
power down and power up sequences
and resets peripheral devices.

The Hibernation feature saves the contents of
your STYLISTIC’s system memory to the hard
drive as a part of the Suspend/Resume mode.
You can enable or disable this feature.

Enable or Disable the Hibernation Feature

Windows 10:

Control Panel.

1. Visit

2. Select "

3. Select "

4. Under "

System and Security

Power Options

select "

Change what power button

do

", and click "

currently unavailable

Hibernate tab. Select the box to enable
or disable this feature and click "

changes

Change settings that are

Shutdown Setting

" to apply.

" and then

"

".

", select the

Save

16

Using Your STYLISTIC

Windows Power Management

The Power Options icon located in the Windows

Control Panel allows you to congure some of

the power managment settings. For example,
you can use the Power Options to set the
timeout values for turning off the display and
hard disks whether you are running the Tablet
PC on battery power or one of the adapters.

Restarting the System

If your system is on and you need to restart it,
be sure that you use the following procedure.

Windows 10

1. Click the Windows icon

2. Click the Power, and select Restarting
from the list.

Turning off your STYLISTIC without
exiting Windows or turning on your Tablet
PC within 10 seconds of the Tablet PC
being shut off may cause an error when
you start the next time.

Power Off

Before turning off power, check that the hard
drive/optical drive access indicator is off. If you
turn off the power while accessing a disk there
is a risk of data loss. To ensure that your Tablet
PC shuts down without error, use the Windows
shut down procedure.

Be sure to close all files, exit all
applications, and shut down your operating

system prior to turning off the power. If les

are open when you turn the power off, you
will lose any changes that have not been
saved, and may cause disk errors.

Using the correct procedure to shut down from
Windows allows your Tablet PC to complete
its operations and turn off power in the
proper sequence to avoid errors. The proper
sequence is:

Windows 10

1. Click the Windows icon

2. Click the
from the list.

If you are going to store your Tablet PC for a
month or more see Care and Maintenance
Section.

Power

, and select

Shut down

17

Troubleshooting

Your Fujitsu STYLISTIC Q509 is sturdy and
subject to few problems in the field. However,
you may encounter simple setup or operating
problems that you can solve on the spot, or
problems with peripheral devices, that you can
solve by replacing the device. The information in
this section helps you isolate and resolve some
of these straightforward problems and identify
failures that require service.

Identifying the Problem

If you encounter a problem that you are
having difficulty in solving, go through the
following procedure before pursuing further
troubleshooting.

1. Turn off your Tablet PC.

2. Make sure the AC adapter is plugged into
your Tablet PC and to an active AC power
source.

3. Make sure that any card installed in the PC Card
slot is seated properly. You can also remove
the card from that slot, thus eliminating it as a
possible cause of failure.

4. Make sure that any devices connected to the
external connectors are plugged in properly.
You can also disconnect such devices, thus
eliminating them as possible causes of
failure.

5.Turn on your Tablet PC. Make sure it has
been off at least 10 seconds before you turn
it on.

6. Go through the boot sequence.

Before you place the call, you should have
the following information ready so that the
customer support representative can provide
you with the fastest possible solution:

• Product name

• Product conguration number

• Product serial number

• Purchase date

• Conditions under which the problem occurred

• Any error messages that have occurred

• Hardware conguration

• Type of device connected, if any

See the Configuration Label on the bottom

of your Tablet PC for conguration and serial

number.

If you keep notes about what you have
tried, your support representative may
be able to help you more quickly by
giving additional suggestions over the
phone.

Do not return a failed Tablet PC to
your supplier until you have talked to a
support representative.

18