Fujitsu PLASMAVISION P42VHA20W, PLASMAVISION P50XHA10U, PLASMAVISION P50XHA10W, PLASMAVISION P42HHA10US, PLASMAVISION P42VHA10US User Manual

...

Download

USER’S MANUAL

42”/50” WIDE PLASMA DISPLAY

P42VHA10W/P42VHA10A/ P42HHA10W/P42HHA10A/ P50XHA10W/P50XHA10A/P50XHA10U/ P42VHA20W/P42VHA20A/P42VHA20U

Contents

Page Page

Before Use

• Safety Precautions ··································· E-2–E-3

• Features ····························································E-4

• Accessories ······················································ E-5

• Handy Tips ······················································· E-5

• Installation ······················································· E-6

Usage

• Part Names and Functions ···················· E-7–E-10

• Using the Remote Control ··················· E-11–E-12

• Connecting the Display to External Equipment

······························································· E-13–E-17

• Basic Operations ·································· E-18–E-19

• Selecting Input Mode ····································· E-20

• Other Basic Operations ································· E-21

• Watching Pictures on the Wide Screen

······························································· E-22–E-23

Adjustments

Others

English

• Adjustment Menu ········································· E-24

• Adjusting Pictures (PICTURE Menu) ··· E-25–E-27

• Adjusting Screen Position and Size (POSITION/SIZE Menu) ························ E-28–E-29

• Adjusting AUDIO (AUDIO Menu) ········ E-30–E-31

• Other Adjustments (FEATURES Menu)

······························································· E-32–E-38

• Initialization of User Adjustment Value (FACTORY DEFAULT) ·····································E-39

• Options ···························································· E-40

• Factory Settings ············································ E-41

• Specification ········································· E-42–E-44

• Cleaning and Maintenance ···························· E-45

Before using the display, read this manual carefully so that you know how to use the display correctly. Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily. * Installation and removal require special expertise. Consult your product dealer for details.

SAFETY PRECAUTIONS

IMPORTANT INFORMATION

IMPORTANT

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: This is a Class A and Class B product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

FCC NOTICE

• P42VHA10W/P50XHA10W: A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

• P42VHA10A/P42HHA10W/P42HHA10A/P50XHA10A/P50XHA10U/P42VHA20W/P42VHA20A/P42VHA20U: A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important Safeguards” carefully before use.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier’s) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit

from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

E-2

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, dose not operate normally, or has been dropped.

– Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. – Do not use attachments not recommended by the product manufacturer as they may cause hazards. – Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire,

electric shock, or other hazards.

– The apparatus shall not be exposed to dripping or splashing. – No objects filled with liquids, such as vases, shall be placed on the apparatus. – Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious

damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount recommended by the manufacturer.

– When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the

product and cart to overturn, damaging equipment or causing possible injury to the operator.

– Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from

overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed, sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhered to.)

For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.

– This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power

supply of your home, consult your product dealer or local power company.

– This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug

into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.

– Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay

particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.

– For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it

from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.

– Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric

shock.

– Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that

could result in a fire or electric shock. Never spill liquid of any kind on the product.

– Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.

Refer all service to qualified service personnel.

–

Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

– When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with

same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

– Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the

product is in proper operating condition.

– The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products

(including amplifiers) that produce heat.

– When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection

against electric shock.

– Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special

hazards when overheated.

– Use only the accessory cord designed for this product to prevent shock.

The power supply voltage rating of this product is AC110–240 V (42”10W/A) and AC220–240 V (50”W/A, 42”20W/A type) and AC 120 V (U type), and the power cord attached conforms to the following power supply voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.

When it is used with other power supply voltage, the power cable must be changed. Use the standard power plug and cord set of the specified country. Consult your product dealer.

Power cord

English

Power supply voltage:

AC 100–125 V

(42”10W, 42”U, 50”U Type:

Included)

AC 200–240 V

(42”20W, 50”W Type:

Included)

AC 240 V (SAA TYPE)

(42”A, 50”A Type:

Included)

E-3

FEATURES

Variety of input signals

• The unit features four video and four S-video input terminals, and five component video terminals.

• In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling DVI standard (HDCP*) high

definition picture quality.

• Depending on the model, the display supports video input for different color television systems as follows: NTSC, PAL, SECAM, PAL60, N-PAL, M-PAL, 4.43NTSC.

Desired screen size

• This display offers a total of five different screen sizes in video input mode: Normal, Wide1, Wide2, Zoom1, and Zoom2.

A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.

• The display has a Compose mode to switch screen size automatically depending on the contents of software.

• Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.

Picture quality

• Pro-setting allows adjustment for even higher picture quality.

• Noise reduction function reduces noise to ensure clear pictures.

• A display suitable for such film materials as movie pictures can be made by 24 frame mode function.

Convenient power saving setting

• When no video signal is input to the display or the remote control is not operated for a long time, this function automatically reduces the power consumption of the unit.

Others

• The white screen and screen orbiter functions are available to minimize phosphor burn-in.

• 3 audio input terminals and 20W + 20W (42”) / 12W + 12W (50”) external speaker output terminal are available.

* The HDCP (High-bandwidth Digital Content Protection) function ensures that high-vision digital contents (movies, etc.) provided with

copy-guard protection can be displayed on the plasma display.

E-4

ACCESSORIES

CHECKING ACCESSORIES

One remote control Two AA batteries

One user’s manual One power cable Two big ferrite

cores

Manual

(42”10W, 42”20U,

50”U Type)

(42”20W, 50”W Type)

(42”A, 50”A Type)

Two small ferrite

cores

HANDY TIPS

• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet (42”)/

1.9 m or 6.3 feet (50”)) from the screen and to look occasionally away while working.

• Have the display inspected and cleaned by your dealer at regular intervals.

• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a

prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly displayed for long periods. (See P. E-37–E-38.)

• The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however, that some pixels constantly remain lit or dimmed.

• The display has a fan to prevent its internal temperature from rising.

• Be careful with the air delivered by the fan. It may be very hot.

• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.

You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote control does not function properly.

• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer for more information.

• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see that the power indicator lamp flashes red.

English

Warning

If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on P. E-45, or contact your dealer.

Information

Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.

E-5

INSTALLATION

To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.

Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the installation.

See the appropriate instruction manual for more information on the installation hardware you select.

To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.

To ensure proper heat radiation, provide at least as much space around the display as shown below.

* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.

* Never attempt to tilt the display sideways or backward.

* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.

* The display can be installed with either of its sides facing down.

Left

Front

Upper

Lower

(cm) (cm)

Right

Side

Wall

Note

The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it.

Reference

See P. E-40 for more information on options.

E-6

PART NAMES AND FUNCTIONS

DISPLAY SECTION – FRONT

①

②

(Right section)

⑨

1 Power indicator lamp

This lamp shows the state of the power supply.

Lit (red): Stand-by

Lit (green): Power ON

Lit (orange): Power saving (DPMS: Power saving

function) mode ON (See P. E-36.)

Flashing (red): Malfunction (Flashes differently depending

on the type of malfunction. See P. E-45 for more information.)

2 Remote control signal receiver

Receives signals from the remote control.

3 Input mode selector button

4 Input mode selector button

Switches between picture input modes.

5 VOL + button

6 VOL – button

Adjusts the sound volume.

7 Wide screen selector button [WIDE]

Switches the screen over to a desired wide screen.

8 ON/OFF button

Turns the power “ON” and “OFF (standby state)”.

[MODE]

English

Control Panel (Right side of display)

Warning

If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.

E-7

PART NAMES AND FUNCTIONS (Continued)

DISPLAY SECTION – LOWER PART

Bottom (P42VHA10 type)

Bottom (P42HHA10 type)

Bottom (50”)

Bottom (P42VHA20 type)

1 /I power switch

When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON ” state, the power indicator lamp goes out and the display is placed in the “OFF” state where power is still partly supplied.

2 RS-232C terminal (RS-232C)

This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC. When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)

3 RGB1 input terminal (RGB1 INPUT/DVI-D)

Connect this terminal to the PC’s display (digital RGB) output terminal. *The connection cable No.88741-8000 made by molex Inc. is recommanded.

4 RGB2 input terminal (RGB2 INPUT/mD-sub)

Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.

5 Power input terminal

Connect this terminal to the power cable supplied with the display. When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)

” state, and the power

E-8

6 External speaker output terminal (EXT SP)

Connect this terminal to the optionally available speaker. When connecting a cable, attach a ferrite core to the cable. (See P. E-13.) *See the speaker instruction manual for more information.

7 Audio1 input terminal (AUDIO1 INPUT) 8 Audio2 input terminal (AUDIO2 INPUT) 9 Audio3 input terminal (AUDIO3 INPUT)

Connect this terminal to the sound output terminal of your VCR, etc. (See P.E-36 for the selection of audio input for video input.)

0 Component video input terminal (VIDEO3 INPUT)

Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.

A S-Video input terminal (VIDEO2 INPUT)

Connect this terminal to the S-video output terminal of your VCR.

B Video input terminal (VIDEO1 INPUT)

Connect this terminal to the video output terminal of your VCR.

C Component video input terminal (VIDEO4 INPUT)

Connect this terminal to the component video output (color difference output) terminal of your HDTV unit or DVD player.

Description of Input Terminals

DVI-D terminal (RGB1 INPUT/DVI-D)

English

RGB2 input terminal (RGB2 INPUT/mD-sub)

RS-232C terminal (RS-232C)

Pin No. Input signal Pin No. Input signal

1 Red 9 —

2 Green 10 Ground

3 Blue 11 —

4— 12—

5 Ground 13 Horizontal synchronization

6 Ground 14 Vertical synchronization

7 Ground 15 —

8 Ground Frame Ground

Pin No. Signal

1 DCD (Data Carrier Detect)

2 RD (Received Data)

3 TD (Transmit Data)

4 DTR (Data Terminal ready)

5 GND (Ground)

6 DSR (Data Set Ready)

7 RTS (Request To send)

8 CTS (Clear To Send)

9 RI (Ring Indication)

E-9

PART NAMES AND FUNCTIONS (Continued)

REMOTE CONTROL

For details, see page .

1 button

Switches between power ON and standby state.

3 DISPLAY OFF button

For showing on-screen-information.

4 PICTURE MODE button

Switches the picture mode.

7 RGB input mode selector button

[RGB 1 – 2]

Selects RGB 1 – 2.

9 Video input mode selector button

[VIDEO 1 – 3]

Selects VIDEO 1 – 3.

A Menu button [MENU] –

Use this button to display a desired menu for adjusting the picture.

B Enter button [ENTER]

Press this button to finalize the selection of a desired menu or option within a menu.

–

2 MUTE button

Temporarily mutes the sound.

5 PICTURE MEMORY button

Recalls the PICTURE MEMORY.

6 WIDE button

Switches the screen over to a desired wide screen.

8 RGB3/VIDEO4 input mode selector

button [RGB3/VIDEO4]

Selects VIDEO4.

0 Volume adjustment buttons

[VOL +/– ]

Adjust the volume. Press the + button to increase the volume. Press the – button to reduce the volume.

C Adjustment buttons [

–

Use these buttons to scroll through options in a menu.

/ / / ]

E-10

USING THE REMOTE CONTROL

PUTTING BATTERIES IN THE REMOTE CONTROL

English

1 To remove the cover, slide it

outwards while pressing it down.

2 Place two AA batteries in the

remote control. Make sure that the batteries are properly oriented.

3 Close the cover until it snaps into

place.

PRECAUTIONS

To prevent malfunction, be sure not to apply any form of severe shock to the remote control.

To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment.

Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.

CAUTION: Be sure to use replacement batteries of the same type as the original ones.

When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/area.

Note

The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.

Do not use rechargeable batteries (Ni-Cd).

E-11

USING THE REMOTE CONTROL (Continued)

EFFECTIVE RANGE FOR THE REMOTE CONTROL

Point the remote control at the display’s signal receiver when using it.

Make sure that there are no obstacles between the remote control and the display’s signal receiver.

Upper

20°

Lower

Display – side

Left

Display – front

30° 30°

5 m (Front)

Right

Information

The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the remote control from a different position.

E-12

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Be sure to turn OFF the power to the display and external equipment before making any connections.

No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information.

RECEPTACLE

Make sure that the power cable’s grounding wire is grounded.

The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information.

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Carefully check the terminals for position and type before making any connections.

Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.

English

Ferrite cores

These ferrite cores are used to attenuate undesired signals.

Two big ferrite cores

When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.

Power Cable

Ferrite Core

Two small ferrite cores

When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.

Ferrite Core

RS-232C Cable

Ferrite Core

E-13

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)

EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS

Speaker

VCR or other external components See P.

Display

Speaker (optional)

Remote control

VCR

DVD player

Satellite tuner

E-14

VCR

• Connect the video signal cable to either the S-video input terminal or the video input terminal.

To audio outputs

To video output

To S-video output

To audio inputs To S-video input

English

To video input

Bottom of Display (Ex.: P42VHA10)

Note

• Unplug the power cord from the AC outlet before you connect external components.

• Also refer to the instructions for the component to be connected.

• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.

E-15

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)

DVD PLAYER

• Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.

• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video

terminal.

To video output

To audio outputs

To component video output

To S-video output

To component video input

To audio inputs

To S-video input

To video input

Bottom of Display (Ex.: P42VHA10)

SATELLITE TUNER

• Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.

• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video

terminal.

To video output

To S-video output

To component video output

To audio outputs

To component video input

E-16

To audio inputs To video input

To S-video input

Bottom of Display (Ex.: P42VHA10)

• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.

• The PC can be connected to either the front side or the rear side, whichever is most convenient.

To RGB output (DVI-D)

To RGB output (mD-sub)

To audio output

To RGB2 input (mD-sub)

English

To audio input

To RGB1 input (DVI-D)

Bottom of Display (Ex.: P42VHA10)

Note

• Unplug the power cord from the AC outlet before you connect external components.

• Also refer to the instructions for the component to be connected.

• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.

E-17

BASIC OPERATIONS

TURNING THE POWER ON AND OFF

* You can also use the buttons

on the display’s control panel to perform these steps.

Press /I to the left at the bottom of the display to the ON

The power lamp lights up.

Press on the remote control.

The color of the power lamp changes from “Red” to “Green”.

Press – or – or

Select the video mode to be input.

Press when the power is ON.

The color of the power lamp changes from “Green” to “Red” and the power turns “OFF”.

state.

E-18

ADJUSTING THE VOLUME

Press the Volume button

Press to increase the volume.

Press

Any value between 0 and 40 can be selected.

* Note that the volume level remains stored even when you

turn OFF the power.

to reduce the volume.

Muting the sound

Press .

The sound is removed.

Press again to restore the sound to the original level.

The mute mode can also be released by pressing the volume buttons.

English

When the volume adjustment button is pressed

E-19

SELECTING INPUT MODE

VIDEO INPUT MODE

Press the – buttons to select the input mode.

You can select from VIDEO1 mode to VIDEO4 mode.

The video modes corresponding to each input terminal are as follows.

• VIDEO1: Video

• VIDEO2: S-video

• VIDEO3: Component video

• VIDEO4: Component video

* For selection of the input terminal, see

“SETTING THE INPUT TERMINALS” on P. E-35.

Video1 mode

* You can also use the buttons

on the display’s control panel to perform these steps.

RGB INPUT MODE

Press – to select the input mode.

You can select between the modes from RGB1 to RGB2.

The input terminal of each RGB mode is as follows.

• RGB1: DVI-D

• RGB2: mD-sub

RGB1 mode

E-20

OTHER BASIC OPERATIONS

CONVENIENT FUNCTIONS

On-screen information (DISPLAY)

Press .

The mode is indicated on the screen for 5 seconds.

Picture Mode (PICTURE MODE)

Press .

This button can be used to switch the picture mode.

In the picture mode, you can switch between the set status and the fine mode.

* For the picture mode settings, see “Setting Picture Mode (P. E-26)”.

Picture Memory (PICTURE MEMORY)

Press .

This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is pressed, the setting changes as follows.

* For the picture memory settings, see “Picture Memory (P. E-27)”.

English

E-21

WATCHING PICTURES ON THE WIDE SCREEN

SWITCHING BETWEEN SCREEN SIZES

* You can also use the buttons

on the display’s control panel to perform these steps.

Press .

The currently selected mode will appear.

Press to select a desired picture mode.

Each time you press , a different picture mode appears. The sequences used are as follows:

When you are in a Video or S-video input mode

When you are in a Comp.video input mode

When you are in an RGB input mode

* Depending on the type of signal, some aspects

may not be selected.

Normal mode

Wide1 mode

Note

• Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.

• A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame

height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same aspect ratio.

• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making

purposes or for a public audience may constitute a copyright infringement.

For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.

Reference

See P. E-28–E-29 for how to adjust the picture size and position.

E-22

SCREEN SIZE

Normal

Displays pictures of normal size (i.e., a 4:3 aspect ratio).

Auto

The screen size changes automatically in accordance with the contents of image software you use.

Wide1

Displays natural-looking pictures of standard size on the wide screen.

Wide2/Wide

Ideal for displaying vertically extended pictures such as squeezed pictures and recorded HDTV programs.

Zoom1/Zoom

Enlarges horizontally extended pictures equally in all directions to maintain the aspect ratio constant.

Zoom2

Reduces the height of horizontally extended pictures with captions, without eliminating the caption. Only the height of pictures is reduced, not the height of the caption.

(Captions may not be easy to read, however, depending on the picture.)

Picture of

standard size

Vertically

extended picture

Horizontally

extended picture

Horizontally extended

picture with caption

English

Wide1

Wide2

Zoom1

Zoom2

ASPECT RATIO

The following aspect ratios are available.

4:3 aspect ratio (VHF/UHF broadcasting, BS broadcasting)

1.85:1 aspect ratio

(Vista Vision size)

Information

You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema Vision size i.e., the sizes used frequently for picture software.

1.85

16:9 aspect ratio (HDTV broadcasting)

2.35:1 aspect ratio (Cinema Vision size)

2.35

E-23

ADJUSTMENT MENU

PICTURE

POSITION/SIZE

AUDIO

FEATURES

FACTORY DEFAULT

Contrast

Brightness

Color

Tint

Sharpness

Picture Mode

PrecisionSetting

Noise Reduction *

Picture Memory

Position

Size

Treble

Bass

Balance

Loudness

Adjustment

Function

On Screen Menu

Input Terminal

Others

Luminance

Black Level

Colour Temp.

User Colour Temp.

*: for other than RGB

Dot Clock

Clock Phase

Clamp Position

Auto Calibration

24 Frame Mode

Can be set when Fine is selected as the Picture Mode.

for RGB2

for RGB2, Comp. video

for RGB2

for Video



OSD

Language

Name Select

Video Input

S-video Input

D-SUB Input

DVI Input

DPMS

Audio Input

Screen Orbiter

Direct Setting

Code Setting

White Screen

Exhibition Mode

Information

for other than RGB1

for RGB

for RGB2

E-24

ADJUSTING PICTURES (PICTURE MENU)

BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]

You can make changes to all picture adjustment options in the PICTURE Menu.

The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any changes.

Press .

The main menu screen will appear.

Press or to select

“PICTURE”.

“PICTURE” selected in the main menu screen (Video Input Mode)

Each time you press or , one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The PICTURE Menu screen will appear.

Press or to select “Tint”.

English

Press

The “Tint” adjustment screen will appear.

Press or to change tint

values.

: More greenish colors

: More purplish colors

Press to store.

Press

* Repeat steps 3, 4, 5 and 6 when you wish to

make changes to other options.

* When

“Default”, the settings are returned to those that were valid when you purchased the set.

when you finish.

is pressed after you have selected

“Tint” selected in the PICTURE Menu screen (Video Input Mode)

“Tint” adjustment screen

* On-screen information disappears if you do not take any action for about 60 seconds.

E-25

ADJUSTING PICTURES (PICTURE MENU) (Continued)

• Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart.

Select the item with

Adjustment Item Adjustment Range/Remarks

Contrast Lower contrast Higher contrast –30 to +30

Brightness Darker screen Brighter screen –60 to +60

Color Lighter colors Darker colors –60 to +60

Tint More purplish colors More greenish colors –60 to +60 (RGB, Comp. video)

Sharpness Softer pictures Sharper pictures –4 to +4 (RGB)

• Setting Picture Mode (Picture Mode)

Can set up the picture mode.

Each time you press or , one of the available choices appears in the following sequence:

Dinamic:Suitable for watching a normal motion picture.(Standard)

Fine: Suitable for watching a dark picture such as movie.

Real 1: Makes a strong contrast picture. Real 2: Makes a bright color picture.

Static: Suitable for watching a still picture.

Press to store.

*Select Dinamic, Fine, Real 1, Real 2 or Static to suit your taste.

, and then adjust with . Finally, press to implement the adjustments.

–30 to +30 (Video, S-video)

–16 to +16 (other than RGB)

• Precision Setting (for more advanced adjustment)

Luminance, Black Level, Color Temperature, and User Color Temperature are adjusted as shown in

the following chart.

Select the item with , and then adjust with . Finally, press to implement the

adjustments.

Adjustment Item Contents of Adjustments Operation

Luminance

Black Level

Color Temperature

User Color Temperature

Adjusts the luminance level. (when the Picture Mode is Fine)

Adjusts the picture when watching a dark image. (when the Picture Mode is Fine)

Set to low to obtain a warm atmosphere, and set to high to obtain a cold atmosphere.

Enables individual adjustment of Red, Green and Blue.

to adjust.

Use

Use to adjust.

Use to select, and use to adjust.

Adjustment Range/Remarks

40 to 100%

–15 to +15

–3500 to +3500

0 to 255

E-26

• Setting Noise Reduction (Noise Reduction)

Can select the noise reduction setting corresponding to the noise level of the input signal.

Each time you press or ,one of the available choices appears in the following sequence:

Off: Noise reduction does not function.

Min.: Weak setting

Std.: Standard setting Max.: Strong setting

Press to store.

*Some type of signal can not be selected.

• Storing the setting of PICTURE (Picture Memory)

Stores 8 patterns of adjustments set by PICTURE.

Read out and store to suit your taste.

In case of “Load”

When setting “Load”: Read out your desired Setting.

(1) Select “Picture Memory” and press .

The “Picture Memory” screen will appear.

(2) Press or to select Load.

(3) Select Data number to make Load.

(4) Press to read out.

English

“Picture Memory” selection screen

In case of “Save”

When setting “Save”: Set to suit your taste and store.

(1) Select “Picture Memory” and press .

The “Picture Memory” screen will appear.

(2) Press or to select Save.

(3) Select Data number to make Save.

(4) Press to save.

“Load” selection screen

* On-screen information disappears if you do not take any action for about 60 seconds.

E-27

ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)

BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION]

You can make changes to all screen adjustment options in the POSITION/SIZE Menu.

The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes.

3 4

Press .



The main menu screen will appear.

Press or to select

“POSITION/SIZE”.

Each time you press or , one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The POSITION/SIZE Menu screen will appear.

Press or to select “Position”.

Press

The “Position” adjustment screen will appear.

Press , , or to

change position values.

: Moves screen up.

: Moves screen down.

: Moves screen to the right.

: Moves screen to the left.

“POSITION/SIZE” selected from the main menu screen

“Position” adjustment screen



E-28

Press to store.

Press

* Repeat steps 3 to 6 when you wish to make

changes to other options.

* When

“Default”, the settings are returned to those that were valid when you purchased the set.

when you finish.

is pressed after you have selected

Adjusting Screen Position (Position)

Horizontal position (Horizontal)

: Moves screen to the right.

→

English

: Moves screen to the left.

Vertical position (Vertical)

: Moves screen up.

: Moves screen down.

Press to store.

Adjusting Screen Size (Size)

Screen width (Width)

: Increases width.

: Reduces width.

Screen height (Height)

: Increases height.

: Reduces height.

→

“Position” adjustment screen

→

“Size” adjustment screen

→

Press to store.

*You cannot adjust screen size in RGB1 (DVI-D) mode.

Setting Range

Video, S-video mode

Position

Size

* Depending on the input signal, the adjustment range may differ.

Horizontal: -30 to +30 Vertical

Zoom: -15 to +15 Others: -7 to +7

-3 to +12 (P42HHA10)

-7 to +16 (P42VHA10/20)

-7 to +12 (P50XHA10)

Comp.video mode

-16 to +16

-2 to +16 (P42HHA10)

-4 to +20 (P42VHA10/20)

-4 to +16 (P50XHA10)

RGB mode

-150 to +150

-12 to +25 (P42HHA10)

-25 to +50 (P42VHA10/P50XHA10/ P42VHA20)

* On-screen information disappears if you do not take any action for about 60 seconds.

E-29

ADJUSTING AUDIO (AUDIO MENU)

BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)]

You can make changes to all sound adjustment options in the AUDIO Menu.

The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any changes.

1 2

Press .

The main menu screen will appear.

Press or to select “AUDIO”.

Each time you press or , one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The AUDIO Menu screen will appear.

Press or to select “Balance”.

Press

The “Balance” adjustment screen will appear.

Press or to adjust the

balance.

“AUDIO” selected in the main menu screen

“Balance” selected in the AUDIO Menu

screen

 



: Higher volume from the right-hand speaker

: Higher volume from the left-hand speaker

Press to store.

Press

* Repeat steps 3 to 6 when you wish to make

changes to other options.

* Audio Input menu will not be displayed when

“No Audio” is selected. (See P. E-36.)

when you finish.

E-30

Adjusting Treble (Treble)

Any value between -6 and +6 can be selected.

: Stronger treble

: Weaker treble

Adjusting Bass (Bass)

Any value between -6 and +6 can be selected.

: Stronger bass

: Weaker bass

Adjusting Volume Balance (Balance)

Any value between -10 and +10 can be selected.

: Higher volume from the right-hand speaker

: Higher volume from the left-hand speaker

Setting Loudness (Loudness)

Corrects the balance between bass and treble for easy listening even with weak volume.

Each time you press sequence:

On : Corrects bass and treble.

Off : Loudness dose not function.

Off

or , one of the available choices appears in the following

English

AUDIO Menu screen

* On-screen information disappears if you do not take any action for about 60 seconds.

E-31

OTHER ADJUSTMENTS (FEATURES MENU)

BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]

You can make the following changes in the FEATURES Menu.

Press .

The main menu screen will appear.

Press or to select

“FEATURES”.

Each time you press or , one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The FEATURES Menu screen will appear.

Press or to select “On Screen Menu”.

• Select a desired option for adjustment/setup from Adjustment, Function, On Screen Menu, Input Terminal and Others.

Press .

• On Screen Menu appears.

Press or to select “Language”.

“FEATURES” selected in the main menu screen

On Screen Menu screen

Press

The “Language” selection screen will appear.

Press or to select the language.

Press

The menu is displayed in the selected language.

Press when you finish.

* Repeat steps 3 to 8 when you wish to make changes

to other options.

“Language” selection screen

E-32

• FEATURES setup screen has the following 5 options.

Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.

Function : Allows setting of 24-frame mode. (See P. E-34.)

On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-34.)

Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-35.)

Others : Can make other settings. (See P. E-36–E-38.)

ADJUSTMENT

Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.

Select the item with , and then adjust with . Finally, press to implement the adjustments.

English

Adjustment Item Contents of Adjustments Operation

Dot Clock (RGB2)

Clock Phase (RGB2)

Clamp Position (RGB2, Comp. video)

Auto Calibration (RGB2)

You may find that pictures blur, depending on the clock frequency of your PC’s processor. If you experience blurring, you can obtain a clearer picture by adjusting the “Dot Clock”.

Pictures may blur as the clock phase of your PC may be different. In this case, adjust the clock phase manually. Normally, the automatic setting ensures the optimal value.

Adjusts the clamp position in accordance with the input signal received from connected equipment. Normally, the automatic setting ensures the optimal value.

Adjusts the dynamic range of images to the optimum. Performed while a white screen signal is received.

Use

to select the optimal value at which blurring of pictures is eliminated.

Use to select the optimal value at which blurring of pictures is eliminated.

Use to select the optimal value.

Display the Auto Calibration screen and select Execute, and then use

to select the item.

Adjustment Range/Remarks

–60 to +60

Auto/Manual Manual: 1 to 32

–8 to +8

Execute/Cancel

* On-screen information disappears if you do not take any action for about 60 seconds.

E-33

OTHER ADJUSTMENTS (FEATURES MENU) (Continued)

FUNCTION

• Displaying the optimum movie pictures (24 Frame Mode) for Video

Can make the optimum display of 24 frames/second signals such as movie pictures.

Each time you press or , one of the available choices appears in the following sequence:

On Off

On : Displays the optimum movie pictures.

Off : Displays normal pictures.

Press to store.

* Some type of signal can not be selected.

ON SCREEN MENU

• Setting Display Information (OSD)

You can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.)

Each time you press or , one of the available choices appears in the following sequence:

On (OSD:bright): On-screen information shown in light color.

On (OSD:dark): On-screen information shown in dark color.

Off: Except for menus and error messages, on-screen information is not displayed.

Press to store.

• Selecting Language (Language)

You can use this option to select the language displayed on the screen.

(1) Select “Language” and press .

The “Language” selection screen will appear.

(2) Press or to select your desired language.

日本語 (Japanese) English

Deutsch (German)

Español (Spanish) Français (French)

Italiano (Italian)

Português (Portuguese)

(3) Press .

The menu is displayed in the selected language.

• Selection of indications

You can change the settings for indications for video inputs and RGB inputs.

Video input

You can change the settings for indications for the VIDEO inputs.

Select the desired indication in accordance with the connected equipment.

Each time is pressed, the setting is switched. (In the case of VIDEO1)

OSD selection screen

“Language” selection screen

Press to store.

RGB input

You can change the settings for indications for the RGB inputs.

Select the desired indication in accordance with the connected equipment.

Each time is pressed, the setting is switched. (In the case of RGB 1)

Press to store.

E-34

SETTING THE INPUT TERMINALS

1234567890123456789012345678901

• Selecting Video Mode (Video Input)

You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.

Each time you press or , one of the available modes appears in the following sequence:

Auto1: Automatically selects NTSC, PAL and SECAM.

Auto2: Automatically selects NTSC and M-PAL. Other than Auto: You need to select a system appropriate to the input signal.

Press to store.

• Selecting S-video Mode (S-video Input)

You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.

Each time you press or , one of the available modes appears in the following sequence:

Auto1: Automatically selects NTSC, PAL and SECAM.

Auto2: Automatically selects NTSC and M-PAL.

Other than Auto: You need to select a system appropriate to the input signal.

Press to store.

• Selecting D-SUB Input (D-SUB Input)

You can use this option to select the signal system it will receive to D-SUB Input terminal.

(1) Select D-SUB Input and press .

D-SUB Input screen appears.

(2) Select the signal system to receive.

Each time you press or , one of the available choices appears in the following sequence:

RGB-PC Decoder

RGB-PC: For using RGB for PC

Decoder: For using digital broadcast tuner

(3) Press or to select Mask.

(4) Select Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following sequence:

Off: Does not mask.

Number: Masks the fringe (top, bottom, right and left) of the screen by the number of pixels

specified.

(5) Press to store.

• DVI Input

You can select the signal method input to the DVI input terminal. Each time or is pressed, the setting is changed.

DVI1 DVI2

DVI1: Used when connecting to a PC.

DVI2: Used when connecting to a DVD player or digital tuner.

Press to store.

* Set according to the signal method before connecting peripheral device.

“D-SUB Input” selection screen

23456789012345678901234567890

This fringe part is masked.

English

* On-screen information disappears if you do not take any action for about 60 seconds.

E-35

OTHER ADJUSTMENTS (FEATURES MENU) (Continued)

OTHER SETTINGS

DPMS for other then RGB1

You can use this option to select the amount of time before the DPMS function starts.

DPMS (which stands for “display power management signaling”) allows the display to maintain an

automatic power saving function.

This function causes on-screen information to disappear until the next input operation, if the power

is ON and the display has not received any signals for the predetermined period of time. When DPMS is active, the power indicator lamp turns orange.

(1) Select DPMS and press .

DPMS screen appears.

(2) Press or to select Time.

(3) Each time you press or , one of the available choices appears in the following sequence:

Off: Disables DPMS

Number: Approximate time before DPMS starts. (Unit: minutes)

* The power indicator lamp turns orange while the DPMS is ON.

* The power turns ON automatically when the display receives a signal.

(4) Can specify background colour.

Press or to select background colour.

Each time you press or , one of the available choices appears in the following sequence:

Black White

Black: Mutes images in Black background.

White: Mutes images in White background.

* Switches approx. 20 seconds after the display stops receiving signals.

(5) Press to store.

• Selecting input terminals (Audio Input)

You can use this option to select one of the three available terminals to receive sound from input

equipment.

(1) Select “Audio Input” and press .

The “Audio Input” selection screen will appear.

(2) Press or to select input equipment.

(3) Select a desired input terminal.

Each time you press or , one of the available choices appears in the following sequence:

DPMS selection screen

“Audio Input” selection screen

No audio: No sound in the corresponding mode.

Audio 1-3: Selects Audio 1 through 3 for receiving sound in the corresponding mode.

* Repeat steps (2) and (3) for each piece of input equipment.

(4) Press to store.

*Audio Input menu will not be displayed when "No Audio"is selected.

E-36

• Minimizing phosphor burn-in (Screen Orbiter) for RGB

You can use this option to move the screen position to minimize phosphor-induced “burn-in”.

Follow the steps below.

(1) Select “Screen Orbiter” and press .

The “Screen Orbiter” setting screen will appear.

(2) Press or to select “Mode/Time”.

(3) Select a desired pattern.

Each time you press or , one of the available choices appears in the following sequence:

Off: Disables Screen Orbiter.

Time: Moves the pattern approximately every one hour.

Mode: Moves the pattern when the power is turned ON or when you switch between modes.

(4) Press or to select “Moving Area”.

(5) Press or to select the range for moving the pattern.

Each time you press or , one of the available choices appears in the following sequence:

Min.: Pattern moves in small range. (About 5 pixels)

Std.: Pattern moves in moderate range. (About 10 pixels)

Max.: Pattern moves in wide range. (About 15 pixels)

(6) Press to store.

* When the Screen Orbiter function is operated in RGB1 mode, some letters at the top, bottom,

right or left of the screen may be missed.

English

“Screen Orbiter” setting screen

• Setting RGB Input Signal Compulsorily (Direct Setting) for RGB

You can use this option to switch the setting for RGB input signal.

Each time you press or , one of the available choices appears in the

following sequence:

For RGB1 mode:

For RGB2 mode:

Auto: The optimum display is obtained automatically for input signals.

Others: The optimum resolution setting is fixed for each signal.

Press to store.

* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may not

be automatically distinguished. Switch to the fixed display when the image is not displayed properly.

* On-screen information disappears if you do not take any action for about 60 seconds.

E-37

OTHER ADJUSTMENTS (FEATURES MENU) (Continued)

• Specifying RGB Input Signal (Code Setting) for RGB2

You can use this option to specify and display the type of RGB input signal by code number.

Each time you press or , one of the available choices appears in the following

sequence:

Auto Manual

Auto: Automatically displays the input signal to the optimum.

Manual: Selects RGB code number.

Press to store.

* In Auto mode, the optimum resolution may not be set up automatically depending on the type of

signal.

Select the type of signal when the image is not displayed properly. However, note that when the type of signal is selected directly, the signal of other resolution may

not be displayed properly.

• Displaying white over entire screen (White Screen)

You can use this option to display white over the entire screen to minimize phosphor burn-in.

Each time you press or , one of the available choices appears in the following sequence:

On Off

Off: Does not display white.

On: Displays a white screen immediately.

Press to store.

• Setting Exhibition Mode (Exhibition Mode)

You can use this option to display the enhanced contrast, which is most suitable for the use by

unspecified persons.

Each time you press or , one of the available choices appears in the following sequence:

On Off

On: Sets up Exhibition mode.

Off: Sets up normal mode.

Press to store.

* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the

adjustment is changed.

* The setup will be cancelled when removing the power plug from the receptacle.

“Code Setting” setting screen

• Displaying System Status (Information)

Displays system operation status.

Select “Information” and press .

The “Information” screen will appear.

Mode: Input mode appears at the upper right corner of the screen.

Freq. Scan Mode: Frequency scanning

Input Signal: Video mode

Input Sync.: Signal type

Freq.: Frequency and polarity (fH, fV)

Preset No.: RGB code number

* On-screen information disappears if you do not take any action for about 60 seconds.

E-38

Information screen (Video Mode)

Information screen (RGB Mode)

INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT)

You can restore the values of the adjustment/setting made in the MENU to factory settings.

Press .

The main menu screen will appear.

English

Press or to select “FACTORY

DEFAULT”.

Each time you press or , one of the available menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The FACTORY DEFAULT Menu screen will appear.

Press .

• Displays the message of whether to proceed with the initialization.

Press or to select the Yes.

Press

• The message of having completed the initialization will be displayed after initializing.

“FACTORY DEFAULT” selected in the main menu screen

Displays the message of whether to proceed the initialization

Press when you finish.

Displays the message of having completed the initialization

E-39

OPTIONS

Wall-mounting unit 0° to 15° mounting angle P-WB4200

Hanging unit 0° to 15° mounting angle P-CT4200

Stand P-TT4200

Speaker P-SP4200 (for 42”)

P-SP5000 (for 50”) (1 set of 2 speakers)

Speaker Stand P-ST4200 (for 42”)

P-ST5000 (for 50”) (1 set of 2 speakers stands)

* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.

* The colors of options do not match the display colors perfectly.

Warning

To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.

CAUTION: This display (P42VHA10/P42HHA10/P50XHA10/P42VHA20) is for use only with Fujitsu

General Limited’s option (P-WB4200, P-CT4200, P-TT4200). Using this display with other option can cause instability resulting in possible injury.

E-40

FACTORY SETTINGS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal.

To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-28–E-29 to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in accordance with the settings you most recently selected.

Main corresponding signals (RGB mode)

English

Display (dots x lines)

640 x 480 31.47 59.94 VGA

640 x 480 37.50 75.00 VGA 75 Hz

640 x 480 43.27 85.01 VGA 85 Hz

720 x 400 31.47 70.09 400 lines

800 x 600 37.88 60.32 SVGA 60 Hz

800 x 600 46.88 75.00 SVGA 75 Hz

800 x 600 53.67 85.06 SVGA 85 Hz

1024 x 768 48.36 60.00 XGA 60 Hz

1024 x 768 60.02 75.03 XGA 75 Hz

1024 x 768 68.68 84.99 XGA 85 Hz

1280 x 1024 63.98 60.02 SXGA 60 Hz

1280 x 1024 79.98 75.03 SXGA 75 Hz

1600 x 1200 75.00 60.00 UXGA 60 Hz

1600 x 1200 106.25 85.00 UXGA 85 Hz

848 x 480 31.02 60.00

852 x 480 31.72 59.97

1360 x 768 47.71 60.01

720 x 485 15.73 59.94 60 fields

720 x 575 15.63 50.00 50 fields

* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make

sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.

* In the DVI-D mode, the input signal can be restricted partly.

Horizontal frequency (kHz) Vertical frequency (Hz)

Signal

DVI-D

In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:

Main corresponding signals (Comp.video mode)

Horizontal

frequency (kHz)

15.73 59.94 SDTV 480I

15.63 50.00 SDTV 576I

31.47 59.94 SDTV 480P

31.25 50.00 SDTV 576P

45.00 60.00 HDTV 720P

37.50 50.00 HDTV 720P

33.75 60.00 HDTV 1080I

28.13 50.00 HDTV 1080I

• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.

•“Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.

• You can check input signals through “Information” on the FEATURES Menu screen. (See P. E-38.)

• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.

• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

Vertical

frequency (Hz)

Signal

Main corresponding signals (Video, S-video mode)

Horizontal

frequency (kHz)

15.73 59.94 NTSC

15.63 50.00 PAL

15.63 50.00 SECAM

15.63 59.52 PAL60

15.63 50.00 N-PAL

15.73 59.95 M-PAL

15.73 59.94 4.43NTSC

Vertical

frequency (Hz)

Signal

E-41

SPECIFICATION

Model P42VHA10W/P42VHA10A P42HHA10W/P42HHA10A

Screen size 42" wide screen: 42" wide screen:

92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal)

36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)

Aspect ratio 16:9 (wide)

Weight 28.5 kg / 62.8 lbs

Outer dimensions 103.7 (W) x 64.2 (H) x 8.5 (D) cm

40.8 (W) x 25.3 (H) x 3.3 (D) inch

Power supply 110–240 VAC 50/60 Hz

Current rating 3.1–1.4 A 4.4–1.9 A

Number of pixels 852 (H) x 480 (V) 1024 (H) x 1024 (V)

Display modes Video, S-video input: Normal/Auto/Wide1/Wide2/Zoom1/Zoom2

Component video input: Normal/Wide1/Wide2/Zoom1/Zoom2

RGB: Normal/Wide/Zoom

Colors 16.77 million

External equipment terminals

Video input terminals VIDEO1 INPUT (Video input) 1 RCA terminal 1 Vp-p/75 Ω

VIDEO2 INPUT (S-video input) 1 S terminal Y: 1 Vp-p/75 Ω

VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω (Component video input) P

– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

Applicable systems NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC

PC input terminal RGB1 input 1 DVI-D terminal (EIA/CEA-861 Compliant)

RGB2 input mD-sub, 3 rows, 15-pin

Picture signal: 0.7 Vp-p/75 Ω Synchronization signal:TTL level

Sound terminals 2 sound input pin jacks (L/R) (3 lines)

500 mVrms/at least 22 kΩ

Control terminal 1 RS-232C connector (D-sub 9-pin)

External speaker output terminal

Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F

Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,

Regulation --- P42VHA10W

• UL, CSA Safety: UL6500, C-UL EMC: FCC Part 15 Class A, ICES-003 Class A

• CE Safety: EN60065 EMC: EN55022 1998, Class A

EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994

• AS Safety: IEC60065 EMC: AS/NZS 3548

Effective max. output: 20 W + 20 W (EIAJ), 4 Ω

Humidity: 20 to 80 %

2 small ferrite cores

Regulation --- P42VHA10A/P42HHA10W/P42HHA10A

• UL, CSA Safety: UL6500, C-UL EMC: FCC Part 15 Class B, ICES-003 Class B

• CE Safety: EN60065 EMC: EN55022 1998, Class B

• AS Safety: IEC60065 EMC: AS/NZS 3548

36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)

C: 0.286 Vp-p/75 Ω

B/CB: 0.7 Vp-p/75 Ω

R/CR: 0.7 Vp-p/75 Ω

EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994

E-42

Model P50XHA10W/P50XHA10A P50XHA10U

Screen size 50" wide screen:

110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal)

43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal)

Aspect ratio 16:9 (wide)

Weight 45.0 kg / 99.2 lbs

Outer dimensions 121.4 (W) x 72.8 (H) x 9.8 (D) cm

47.8 (W) x 28.7 (H) x 3.9 (D) inch

Power supply 220–240 VAC 50/60 Hz 120 VAC 50/60 Hz

Current rating 2.7–2.0 A 4.9 A

Number of pixels 1366 (H) x 768 (V)

Display modes Video, S-video input: Normal/Auto/Wide1/Wide2/Zoom1/Zoom2

Component video input: Normal/Wide1/Wide2/Zoom1/Zoom2

RGB: Normal/Wide/Zoom

Colors 16.77 million

External equipment terminals

Video input terminals VIDEO1 INPUT (Video input) 1 RCA terminal 1 Vp-p/75 Ω

VIDEO2 INPUT(S-video input) 1 S terminal Y: 1 Vp-p/75 Ω

C: 0.286 Vp-p/75 Ω

VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω (Component video input) P

B/CB: 0.7 Vp-p/75 Ω

R/CR: 0.7 Vp-p/75 Ω

Applicable systems NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC

PC input terminal RGB1 input 1 DVI-D terminal (EIA/CEA-861 Compliant)

RGB2 input mD-sub, 3 rows, 15-pin

Picture signal: 0.7 Vp-p/75 Ω Synchronization signal:TTL level

Sound terminals 2 sound input pin jacks (L/R) (3 lines)

500 mVrms/at least 22 kΩ

Control terminal 1 RS-232C connector (D-sub 9-pin)

External speaker output terminal

Effective max. output: 12 W + 12 W (EIAJ), 6 Ω

Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F

Humidity: 20 to 80 %

Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,

2 small ferrite cores

Regulation --- P50XHA10W

• UL, CSA Safety: UL6500, C-UL EMC: FCC Part 15 Class A, ICES-003 Class A

• CE Safety: EN60065 EMC: EN55022 1998, Class A

EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994

• AS Safety: IEC60065 EMC: AS/NZS 3548

Regulation --- P50XHA10A/P50XHA10U

• UL, CSA Safety: UL6500, C-UL EMC: FCC Part 15 Class B, ICES-003 Class B

• CE Safety: EN60065 EMC: EN55022 1998, Class B

EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994

• AS Safety: IEC60065 EMC: AS/NZS 3548

English

• Specifications and external appearance may be change for the sake of improvement.

• is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.

E-43

SPECIFICATION (Continued)

Model P42VHA20W/P42VHA20A P42VHA20U

Screen size 42" wide screen:

92.0 cm (W) x 51.8 cm (H) (106.0 cm diagonal)

36.2 inch (W) x 20.4 inch (H) (41.7 inch diagonal)

Aspect ratio 16:9 (wide)

Weight 29.5 kg / 65.0 lbs

Outer dimensions 103.7 (W) x 64.2 (H) x 8.5 (D) cm

40.8 (W) x 25.3 (H) x 3.3 (D) inch

Power supply 220–240 VAC 50/60 Hz 120 VAC 50/60 Hz

Current rating 1.8–1.5 A 4.3 A

Number of pixels 852 (H) x 480 (V)

Display modes Video, S-video input: Normal/Auto/Wide1/Wide2/Zoom1/Zoom2

Component video input: Normal/Wide1/Wide2/Zoom1/Zoom2

RGB: Normal/Wide/Zoom

Colors 16.77 million

External equipment terminals

Video input terminals VIDEO1 INPUT (Video input) 1 RCA terminal 1 Vp-p/75 Ω

VIDEO2 INPUT(S-video input) 1 S terminal Y: 1 Vp-p/75 Ω

C: 0.286 Vp-p/75 Ω

VIDEO3/VIDEO4 INPUT 3 RCA terminals Y: 1 Vp-p/75 Ω (Component video input) P

Applicable systems NTSC/PAL/SECAM/PAL60/N-PAL/M-PAL/4.43NTSC

PC input terminal RGB1 input 1 DVI-D terminal (EIA/CEA-861 Compliant)

RGB2 input mD-sub, 3 rows, 15-pin

Picture signal: 0.7 Vp-p/75 Ω Synchronization signal:TTL level

Sound terminals 2 sound input pin jacks (L/R) (3 lines)

500 mVrms/at least 22 kΩ

Control terminal 1 RS-232C connector (D-sub 9-pin)

External speaker output terminal

Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F

Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,

Regulation --- P42VHA20W/P42VHA20A

• UL, CSA Safety: UL6500, C-UL EMC: FCC Part 15 Class B, ICES-003 Class B

• CE Safety: EN60065 EMC: EN55022 1998, Class B

EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994

• AS Safety: IEC60065 EMC: AS/NZS 3548

Effective max. output: 12 W + 12 W (EIAJ), 6 Ω

Humidity: 20 to 80 %

2 small ferrite cores

Regulation --- P42VHA20U

• UL, CSA Safety: UL6500, C-UL EMC: FCC Part 15 Class B, ICES-003 Class B

• CE Safety: EN60065 EMC: EN55022 1998, Class B

EN61000-3-2 1995 EN61000-3-3 1995 EN55024 1998 EN61000-4-2 1995 EN61000-4-3 1996 EN61000-4-4 1995 EN61000-4-5 1995 EN61000-4-6 1996 EN61000-4-8 1993 EN61000-4-11 1994

• AS Safety: IEC60065 EMC: AS/NZS 3548

B/CB: 0.7 Vp-p/75 Ω

R/CR: 0.7 Vp-p/75 Ω

• Specifications and external appearance may be change for the sake of improvement.

• is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.

E-44

CLEANING AND MAINTENANCE

Precautions

Be sure to remove the power plug from the receptacle before cleaning the display. Be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the remote control. They can also cause paint to come off these sections.

Cleaning the Screen

Clean the screen gently with a soft cloth. The screen surface is fragile. Never attempt to clean it with a hard material, press on it forcefully, or tap it.

Cleaning the Cabinet and Remote Control

Use a soft cloth for cleaning. If the cabinet or remote control is heavily stained, soak a soft cloth in a mixture of water and detergent and squeeze it dry before wiping off the stains. Use a soft, dry cloth for final cleaning.

Cleaning the ventilation grille

Remove dust from the ventilation grille in the rear of the main unit periodically with a vacuum cleaner as the accumulated dust can increase the internal temperature of the main unit causing machine failure or fire hazard.

HANDY TIPS

In the event of problems with the display, check the following explanations before contacting your dealer for servicing.

Problem

• Power does not turn ON.

• No pictures are displayed.

• Remote control does not function properly.

• The display makes a snapping sound.

• The display makes a buzzing sound.

• There are spots on the screen.

• Degraded colors/tints

• Improper screen position/size

• No sound

• If “Out of range” appears or the screen

turns black and white, the display is receiving a signal whose picture or signal cannot be reproduced by the display.

• If “Error message Condition 1” appears, the fan is defective.

• If “Error message Condition 2” appears, the display’s internal components are extremely hot.

• If “Change refresh rate to 60Hz” appears,

• If the power indicator lamp flashes red.

• Check whether the power plug is securely inserted into the receptacle.

• Check cables for disconnection.

• Check whether the power for all input equipment is ON.

• Check for connection to wrong terminals or for wrong input mode.

• Check whether the input mode display is colored pink.Special setup may have been

made. Return to original setup or initialize the User adjustment value.

• Check for incorrect battery orientation.

• Check for dead batteries.

• Check for distance from the display.

• Check whether you are pointing the remote control transmitter properly at the display’s

receiver.

• Check for any obstacle between the remote control and the display.

• This sound is produced when the cabinet expands or contracts due to variations in

temperature. This sound does not indicate that the display has a problem.

• The display has fans to maintain the temperature of internal components at a constant level. This sound is produced by the fan as it rotates.

• Check whether your AV equipment is affected by interference from automobiles, trains, high-voltage transmission lines, neon signs or other potential sources of interference.

• Check whether all picture adjustments have been properly made. (See “Adjusting Pictures” on P. E-25–E-27.)

• Check whether screen position and size have been properly adjusted. (See “Adjusting Screen Position and Size” on P. E-28–E-29.)

• Check cables for disconnection.

• Input proper signals.

Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/ XGA/UXGA, 75 Hz or less for SXGA.

• Remove the power plug from the receptacle, and contact your dealer for repairs.

• Remove the power plug from the receptacle. (You can turn the power back ON again

when the components have cooled sufficiently.) If the message appears again when you turn the power back on, remove the power plug from the receptacle, and contact your dealer for a repairs.

• The picture may get blurred with vertical frequency of other than 48.3–51.8 or

58.4–61.4 (Hz). Change the setting of your PC,etc.

• Remove the power plug from the receptacle, and inform your dealer about how the lamp flashed. As explained below, the power indicator lamp flashes differently depending on the type of problem:

– Flashes repeatedly: Improper supply voltage level – Flashes once: Malfunction by the fan – Flashes twice: Excessive temperature – Flashes three times or more: Other problems

Action

English

E-45

Fujitsu PLASMAVISION P42VHA20W, PLASMAVISION P50XHA10U, PLASMAVISION P50XHA10W, PLASMAVISION P42HHA10US, PLASMAVISION P42VHA10US User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual