Fujitsu PLASMAVISION P50XCA10UH, PLASMAVISION P42HCA10UH, PLASMAVISION P42HCA11UH, PLASMAVISION P42VCA21UH, PLASMAVISION P42VCA12UH User Manual

USER’S MANUAL

42”/50” WIDE PLASMA DISPLAY

P42VCA10/P42HCA10/P50XCA10/P42VCA20/
P42VCA11/P42HCA11/P50XCA11/P42VCA21/
P42VCA12/P42HCA12/P50XCA12/P42VCA22

English

Before Use

• Safety Precautions ··································· E-2–E-3

• Features ····························································E-4

• Accessories ······················································ E-5

• Handy Tips ······················································· E-5

• Installation ······················································· E-6

Usage

• Part Names and Functions ····················· E-7–E-11

• Using the Remote Control ·····························E-12

• Connecting the Display to External
Equipment ············································ E-13–E-15

• Basic Operations ············································ E-16

• Selecting Input Mode ·····································E-17

•

Watching Pictures on the Wide Screen ···

E-18–E-19

Contents

Page Page

Adjustments

• Adjusting Pictures (PICTURE Menu) ··· E-20–E-21

• Adjusting Screen Position and Size
(POSITION/SIZE Menu) ························ E-22–E-23

• Adjusting Audio (AUDIO Menu) ········· E-24–E-25

•

Other Adjustments (FEATURES Menu) ···

• Initialization of User Adjustment Value
(FACTORY DEFAULT) ·····································E-34

Others

• Options ···························································· E-35

• Factory Settings ············································ E-36

• Specification ········································· E-37–E-40

• Cleaning and Maintenance ···························· E-41

E-26–E-33

Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the
safety precautions.
Keep this manual where the user can see it easily.
* Installation and removal require special expertise. Consult your product dealer for details.

SAFETY PRECAUTIONS

IMPORTANT INFORMATION

IMPORTANT

The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in

which case the user may be required to take adequate measures.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

FCC NOTICE

• P42VCA10/P42HCA10/P50XCA10/P42VCA20: A class A digital device

• P42VCA11/P42HCA11/P50XCA11/P42VCA21: A class A digital device

• P42VCA12/P42HCA12/P50XCA12/P42VCA22: A class A digital device

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards
incorporated into this product, observe the following basic rules for its installation, use and service. Please read these “Important
Safeguards” carefully before use.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifier’s) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit

from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

E-2

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, dose not operate normally, or has been dropped.

– Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

– Do not use attachments not recommended by the product manufacturer as they may cause hazards.

– Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire,

electric shock, or other hazards.

– The apparatus shall not be exposed to dripping or splashing.

– No objects filled with liquids, such as vases, shall be placed on the apparatus.

– Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious

damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount
recommended by the manufacturer.

– When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the

product and cart to overturn, damaging equipment or causing possible injury to the operator.

– Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from

overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed,
sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided and the manufacturer’s instructions have been adhered to.)

For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.

– This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power

supply of your home, consult your product dealer or local power company.

– This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug

into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.

– Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay

particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.

– For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it

from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.

– Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric

shock.

– Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that

could result in a fire or electric shock. Never spill liquid of any kind on the product.

– Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.

Refer all service to qualified service personnel.

–

Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following
the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.

– When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with

same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

– Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the

product is in proper operating condition.

– The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products

(including amplifiers) that produce heat.

– When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection

against electric shock.

– Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special

hazards when overheated.

– Use only the accessory cord designed for this product to prevent shock.

The power supply voltage rating of this product is AC110–240 V (42”10/11/12 W/E/A) and AC220–240 V (42”20/21/22 W/E/A, 50” W/
E/A type) and AC 120 V (U type), and the power cord attached conforms to the following power supply voltage. Use only the power
cord designated by our dealer to ensure Safety and EMC.

When it is used with other power supply voltage, the power cable must be changed.

Use the standard power plug and cord set of the specified country.

Power cord

Consult your product dealer.

English

Power supply voltage:

AC 100–125 V

(42”10/11/12W, 42”U, 50”U

Type: Included)

AC 200–240 V

(42”20/21/22W, 42”E, 50”W,

50”E Type: Included)

AC 240 V (SAA TYPE)

(42”A, 50”A Type: Included)

E-3

FEATURES

This display uses a plasma display panel and is only 8.5 cm (42”) /9.8 cm (50”) deep. With its high picture quality and performance, it is
perfectly suited for multimedia applications.

Variety of input signals

• RGB input is compatible with mD-sub terminals and BNC terminals.

• The display has an RGB input terminal to receive signals, including VGA, SVGA, XGA, SXGA and UXGA.

3 screen sizes (RGB input mode)

• Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.

Vertical installation

• The display can be installed vertically, enabling advertisement to be displayed. In this case, you can set up the display so that on-screen
information, such as input modes and menus, is displayed properly.

Power management function

• The display features a DPMS (Display Power Management Signaling) function that ensures automatic power saving capability.

Flexible as part of a system

• You can operate the display by remote control using the RS-232C interface.

• If you have two or more displays, you can assign a unique number to each of them so that you can select which one you want to use.

• Input Priority function for selecting automatic switching to desired mode is provided to avoid troublesome operation.

Others

• You can specify the color temperature.

• The white screen and screen orbiter functions are available to minimize phosphor burn-in.

E-4

ACCESSORIES

CHECKING ACCESSORIES

English

One remote control Two AA batteries

One user’s manual One power cable Two big ferrite

cores

Manual

(42”10/11/12W,

42”U, 50”U Type)

(42”20/21/22W, 42”E,

50”W, 50”E Type)

(42”A, 50”A Type)

Two small ferrite

cores

(P42VCA11/

P42HCA11/
P50XCA11/

P42VCA21 only)

HANDY TIPS

• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet (42”)/

1.9 m or 6.3 feet (50”)) from the screen and to look occasionally away while working.

• Have the display inspected and cleaned by your dealer at regular intervals.

• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a
prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly
displayed for long periods. (See P. E-31–E-32.)

• The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however,
that some pixels constantly remain lit or dimmed.

• The display has a fan to prevent its internal temperature from rising.

• Be careful with the air delivered by the fan. It may be very hot.

• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.

You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote
control does not function properly.

• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer
for more information.

• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see
that the power indicator lamp flashes red.

Warning

If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on
P. E-41, or contact your dealer.

Information

Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.

E-5

INSTALLATION

To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.

Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be
sure that your dealer performs the installation.

See the appropriate instruction manual for more information on the installation hardware you select.

To ensure proper heat radiation, provide at least as much space around the display as shown below.

* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.

* Never attempt to tilt the display sideways or backward.

* To prevent the power and other cables from being accidentally pulled, be sure to make the wiring work along the wall or through the

corners of floor.

* To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.

Horizontal type

Front Side

(cm) (cm)

Upper

10

Left

10

5

Lower

10

Right

Wall

4

Note

The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing
materials originally supplied with the display when repacking it.

Reference

See P.E-35 for more information on options.

E-6

PART NAMES AND FUNCTIONS

Front (both 42" and 50")

①

②

English

1 Power indicator lamp

This lamp shows the state of the power supply.

Lit (red): Power OFF (stand-by)

Lit (green): Power ON

Lit (orange): Power saving (DPMS: Power saving

function) mode ON

Flashing (red): Malfunction (Flashes differently depending

on the type of malfunction. See P. E-41 for
more information.)

2 Remote control signal receiver

Receives signals from the remote control.

Warning

If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.

E-7

PART NAMES AND FUNCTIONS (Continued)

Bottom (42” VCA 10/11/12 type)

Bottom (42” HCA type)

Bottom (50”)

Bottom (42” VCA 20/21/22 type)

1 OFF/STD-BY switch

OFF :

STD-BY :The power indicator lamp lights red, and the power can be turned on or off by the power button.

2 RS-232C terminal (RS-232C)

This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.

When connecting a cable, attach a ferrite core to the cable. (See P. E-13.)

3 RGB1 input terminal (RGB1 INPUT/mD-sub)

Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.

The power indicator lamp goes off, and the power can’t be turned on by the power button. The power is partly supplied.

E-8

4 Power input terminal

Connect this terminal to the power cable supplied with the display.

When connecting a cable,attach a ferrite core to the cable. (See P. E-13)

5 External speaker output terminal (EXT SP)

Connect this terminal to the optionally available speaker.

(When using other speaker than the optional one, use 4–16 Ω speaker.)

When connecting a cable, attach a ferrite core to the cable. (See P. E-13)

* See the speaker instruction manual for more information.
* P42VCA11/P42HCA11/P50XCA11/P42VCA21 only.

6 Sound 1 input terminal (AUDIO1 INPUT)

7 Sound 2 input terminal (AUDIO2 INPUT)

8 Sound 3 input terminal (AUDIO3 INPUT)

Connect this terminal to the sound output terminal of your computer, etc. (See P.E-30 for the selection of audio input for video input.)

* This terminal is not available for P42VCA10/P42HCA10/P50XCA10/P42VCA20.

9 RGB2 input terminal (RGB2 INPUT/BNC)

Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner,etc.) output terminal.

0 RGB2 synchronization switch (SYNC SW TTL/ANALOG (75 Ω))

This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB2 input terminals, with 75 Ω .

TTL : Does not terminate.

ANALOG (75 Ω): Terminates.

English

E-9

PART NAMES AND FUNCTIONS (Continued)

Description of Input Terminals

RGB1 terminal (RGB1 INPUT/mD-sub)

RS-232C terminal (RS-232C)

Pin No. Input signal Pin No. Input signal

1 Red 9 —

2 Green 10 Ground

3 Blue 11 —

4— 12—

5 Ground 13 Horizontal synchronization

6 Ground 14 Vertical synchronization

7 Ground 15 —

8 Ground Frame Ground

Pin No. Signal

1 DCD (Data Carrier Detect)

2 RD (Received Data)

3 TD (Transmit Data)

4 DTR (Data Terminal ready)

5 GND (Ground)

6 DSR (Data Set Ready)

7 RTS (Request To send)

8 CTS (Clear To Send)

9 RI (Ring Indication)

E-10

Remote Control

1

3

8

1 Power ON button [POWER ON] ➝ (See P. E-16.)

2 Power OFF button [POWER OFF] ➝ (See P. E-16.)

2

3 RGB input mode selector button [RGB] ➝ (See P. E-17.)

5

4 Video input mode selector button [VIDEO]

4

6

7

9

=

Unused.

5 Wide screen selector button [WIDE] ➝ (See P. E-18–E-19.)

6 Menu button [MENU] ➝ (See P. E-20–E-34.)

Use this button to display a desired menu for adjusting the picture.

7 Volume adjustment buttons [VOL +/-] ➝ (See P. E-16.)

Adjust the volume. Press the + button to increase the volume.

Press the - button to reduce the volume.

* Not used with P42VCA10/P42HCA10/P50XCA10/P42VCA20.

8 Adjustment buttons [

Use these buttons to scroll through options in a menu and change values.

9 Enter button [ENTER] ➝ (See P. E-20–E-34.)

Press this button to finalize the selection of a desired menu or option within a menu.

0 Display selector buttons [SHIFT 1–4] ➝ (See P. E-32.)

When you use two or more displays, you can use these buttons to control up to four displays
by assigning a unique number to each display.

/ / / ] ➝ (See P. E-20–E-34.)

English

PUTTING BATTERIES IN THE REMOTE CONTROL

1 To remove the cover, slide it

outwards while pressing it down.

2 Place two AA batteries in the

remote control. Make sure that the
batteries are properly oriented.

CAUTION: Be sure to use replacement batteries of the same type as the original ones.

When disposing of used batteries, please comply with governmental regulations or environmental
public institution’s rules that apply in your country/area.

3 Close the cover until it snaps into

place.

Note

The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.

Do not use rechargeable batteries (Ni-Cd).

E-11

USING THE REMOTE CONTROL

PRECAUTIONS

To prevent malfunction, be sure not to apply any form of severe shock to the remote control.

To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or
heating equipment.

Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.

EFFECTIVE RANGE FOR THE REMOTE CONTROL

Point the remote control at the display’s signal receiver when using it.

Make sure that there are no obstacles between the remote control and the display’s signal receiver.

30°

5 m (Front)

30°

Upper

20°

20°

Lower

RightLeft

Information

The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the
remote control from a different position.

E-12

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Be sure to turn OFF the power to the display and external equipment before making any connections.

No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC
model. Contact your dealer for more information.

RECEPTACLE

Make sure that the power cable’s grounding wire is grounded.

The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you
will need to have it replaced. Contact your dealer for more information.

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Carefully check the terminals for position and type before making any connections.

Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.

English

Ferrite cores

These ferrite cores are used to attenuate undesired signals.

Two big ferrite cores

When connecting a cable to the power input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal.

Power Cable

Ferrite Core

Two small ferrite cores

When connecting a cable to the external speaker output terminal attach one of these ferrite cores to the cable near the terminal.
(P42VCA11/P42HCA11/P50XCA11/P42VCA21 only.)

Ferrite Core

RS-232C Cable

Ferrite Core

Ferrite Core

E-13

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)

EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS

Speaker

VCR or other external
components See P.

Display

Speaker (optional)

Remote

control

PC

E-14

PC

• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.

English

To RGB output (mD-sub)

To audio output

To audio
input

To RGB1 input
(mD-sub)

Bottom of Display (Ex.: P42VCA11 series)

Note

• Unplug the power cord from the AC outlet before you connect external components.

• Also refer to the instructions for the component to be connected.

* When inputting voice see “Selecting input terminals (page E-30)”

* The sound terminal is not available for P42VCA10/P42HCA10/P50XCA10/P42VCA20.

E-15

BASIC OPERATIONS

TURNING ON THE POWER

Select the OFF/STD-BY switch

1

2

at the STD-BY

When you do so, the power indicator lamp turns
red.

Press on the remote
control.

When you do so, the power indicator lamp turns
green.

of the display.

TURNING OFF THE POWER

Press when the power is ON.

The power indicator lamp turns red.

ADJUSTING THE VOLUME

Press to increase the volume.

Press

Any value between 0 and 40 can be selected.

* “No Audio” appears if you press

selected “No Audio” for “Audio Input”. (See P. E-30.)

* Note that the volume level remains stored even when you

turn OFF the power.

* Not used with P42VCA10/P42HCA10/P50XCA10/

P42VCA20.

to reduce the volume.

or after you have

When the volume adjustment button is pressed

E-16

SELECTING INPUT MODE

RGB INPUT MODE

1

English

Press to select a desired
input mode.

Each time you press , a different input mode
appears. The sequence is as follows:

RGB1:Displays pictures from equipment

connected to the RGB1 (mD-sub) terminal.

RGB2:Displays pictures from equipment

connected to the RGB2 (BNC x 5)
terminal.

RGB1 mode

RGB2 mode

E-17

WATCHING PICTURES ON THE WIDE SCREEN

SWITCHING BETWEEN SCREEN SIZES

1

2

Press .

The currently selected mode will appear.

Press to select a desired
picture mode.

Each time you press , a different picture mode
appears. The sequences used are as follows:

When you are in an RGB input mode

* Depending on the type of signal, some aspects

may not be selected.

Normal mode

Wide mode

Note

• Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.

• A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame

height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same
aspect ratio.

• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making

purposes or for a public audience may constitute a copyright infringement.

For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.

Reference

See P. E-22–E-23 for how to adjust the picture size and position.

E-18

SCREEN SIZE

Normal

Displays pictures of normal size (i.e., a 4:3 aspect ratio).

Wide

Ideal for displaying vertically extended pictures such as squeezed pictures and recorded
HDTV programs.

Zoom

Enlarges horizontally extended pictures equally in all directions to maintain the aspect
ratio constant.

Vertically

extended picture

Horizontally

extended picture

English

Wide

Zoom

ASPECT RATIO

The following aspect ratios are available.

4:3 aspect ratio
(VHF/UHF broadcasting, BS broadcasting)

1.85:1 aspect ratio

(Vista Vision size)

4

3

1.85

1

16:9 aspect ratio
(HDTV broadcasting)

9

2.35:1 aspect ratio
(Cinema Vision size)

1

16

2.35

Information

You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema
Vision size i.e., the sizes used frequently for picture software.

E-19

ADJUSTING PICTURES (PICTURE MENU)

BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]

You can make changes to all picture adjustment options in the PICTURE Menu.

The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any
changes.

1

2

3

4

Press .

The main menu screen will appear.

Press or to select “PICTURE”.

Each time you press or , one of the available
menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The PICTURE Menu screen will appear.

Press or to select “Tint”.

Press

The “Tint” adjustment screen will appear.

.

“PICTURE” selected in the main menu
screen

“Tint” selected in the PICTURE Menu
screen

E-20

5

6

Press or to change tint
values.

: More greenish tint

: More purplish tint

Press to store.

Press

* Repeat steps 3, 4, 5, and 6 when you wish to

make changes to other options.

when you finish.

“Tint” adjustment screen

• Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart.

Select the item with

Adjustment Item Adjustment Range/Remarks

, and then adjust with . Finally, press to implement the adjustments.

Contrast Lower contrast Higher contrast –30 to +30

Brightness Darker screen Brighter screen –60 to +60

Color Lighter colors Darker colors –60 to +60

Tint More purplish colors More greenish colors –60 to +60

Sharpness Softer pictures Sharper pictures –4 to +4

• Setting Picture Mode (Picture Mode)

Can set up the picture mode.

Each time you press or , one of the available choices appears in the following sequence:

Dynamic: Suitable for watching a normal motion picture.(Standard)
Real: Makes a strong contrast picture.
Static: Suitable for watching a still picture.

Press to store.

* Select Dynamic, Real or Static to suit your taste.

• Setting Luminance

Luminance can be set.

Use or to select a value between 40 and 100.

Press to store.

* Settings can only be done when the Picture Mode is Static.

• Adjusting Color Temperature (Color Temp.)

Use or to specify a desired color temperature. Each time you press or , one of the
available choices appears in the following sequence:

English

–3500: More reddish colors
Standard: Standard color temperature
+3500: More bluish colors
User: User Color Temp. setup

Press to store.

• Setting User Color Temp. (User Color Temp.)

Can set up when User is selected in Color Temp.
Press or to select Red, Green or Blue and press or to make adjustment in the range
of 0 to 255.
Press to store.
* Color Temp. setup is switched to User. The initial value of User Color Temp. is adjusted

individually at the factory.

User Color Temp.adjustment screen

* On-screen information disappears if you do not take any action for about 60 seconds.

E-21

ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)

BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN

POSITION

You can make changes to all screen adjustment options in the POSITION/SIZE Menu.

The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.

]

1

2

3

Press .

The main menu screen will appear.

Press or to select
“POSITION/SIZE”.

Each time you press or , one of the available
menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The POSITION/SIZE Menu screen will appear.

Press or to select
“Position”.

“POSITION/SIZE” selected from the main
menu screen

4

5

6

7

Press

The “Position” adjustment screen will appear.

Press or to select
“Horizontal” values of screen
position.

Press
horizontal values.

: Moves screen to the right.

: Moves screen to the left.

Press to store.

Press

* Repeat steps 3 to 7 when you wish to make

changes to other options.

.

or to change

when you finish.

“Position” adjustment screen

E-22

Adjusting Screen Position (Position)

Horizontal position (Horizontal)

: Moves screen to the right.

English

→

: Moves screen to the left.

Vertical position (Vertical)

: Moves screen up.

: Moves screen down.

Press to store.

Adjusting Screen Size (Size)

Screen width (Width)

: Increases width.

: Reduces width.

Screen height (Height)

: Increases height.

: Reduces height.

→

“Position” adjustment screen

→

→

→

→

“Size” adjustment screen

→

→

Press to store.

Setting Range

RGB mode

Position

Size

* Depending on the input signal, the adjustment range may differ.

-150 to +150

-12 to +25 (P42HCA10/11/12)

-25 to +50 (P42VCA10/11/12, P50XCA10/11/12, P42VCA20/21/22)

* On-screen information disappears if you do not take any action for about 60 seconds.

E-23

ADJUSTING AUDIO (AUDIO MENU)

BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)]

You can make changes to all sound adjustment options in the AUDIO Menu.

The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any
changes.

Press .

1

The main menu screen will appear.

Press or to select “AUDIO”.

2

Each time you press or , one of the available
menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The AUDIO Menu screen will appear.

“AUDIO” selected in the main menu screen

3

4

5

6

Press or to select
“Balance”.

Press

The “Balance” adjustment screen will appear.

Press or to adjust the
balance.

: Higher volume from the right-hand speaker

: Higher volume from the left-hand speaker

Press to store.

Press

* Repeat steps 3 to 6 when you wish to make

changes to other options.

* Audio Input menu will not be displayed when

“No Audio” is selected. (See P. E-30.)

.

when you finish.

ＡＵＤＩＯ
Ｔｒｅｂｌｅ

−−−−−−−−−

Ｂａｓｓ

−−−−−−−−−

Ｂａｌａｎｃｅ

−−−−−−−−−

＜＞ ａｄｊｕｓｔ

“Balance” selected in the AUDIO Menu
screen

０

０

０

E-24

Adjusting Treble (Treble)

Any value between -6 and +6 can be selected.

: Stronger treble

: Weaker treble

ＡＵＤＩＯ
Ｔｒｅｂｌｅ

−−−−−−−−−

Ｂａｓｓ

−−−−−−−−−

Ｂａｌａｎｃｅ

−−−−−−−−−

English

０

０

０

Adjusting Bass (Bass)

Any value between -6 and +6 can be selected.

: Stronger bass

: Weaker bass

Adjusting Volume Balance (Balance)

Any value between -10 and +10 can be selected.

: Higher volume from the right-hand speaker

: Higher volume from the left-hand speaker

Setting Loudness (Loudness)

Corrects the balance between bass and treble for easy listening even with weak volume.

Each time you press
sequence:

On

Off

On : Corrects bass and treble.

Off : Loudness dose not function.

or , one of the available choices appears in the following

＜＞ ａｄｊｕｓｔ

“Treble” selected in the AUDIO Menu
screen

* On-screen information disappears if you do not take any action for about 60 seconds.

* Cannot be set with P42VCA10/P42HCA10/P50XCA10/P42VCA20.

E-25

OTHER ADJUSTMENTS (FEATURES MENU)

BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]

You can make the following changes in the FEATURES Menu.

1

2

3

4

Press .

The main menu screen will appear.

Press or to select “FEATURES”.

Each time you press or , one of the available
menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The FEATURES Menu screen will appear.

Press or to select "On Screen
Menu".

• Select a desired option for adjustment/setup from
Adjustment, Function, On Screen Menu, Input
Terminal and Others.

Press .

• On Screen Menu appears.

“FEATURES” selected in the main menu
screen

On Screen Menu screen

5

6

7

8

Press or to select
“Language”.

Press

The “Language” selection screen will appear.

Press or to select the
language.

Press

The menu is displayed in the selected language.

Press when you finish.

* Repeat steps 3 to 8 when you wish to make changes

to other options.

.

.

“Language” selection screen

E-26

• FEATURES setup screen has the following 4 options.

Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.

On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-28.)

Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-28–E-29.)

Others : Can make other settings. (See P. E-30–E-33.)

ADJUSTMENT

• Adjusting Dot Clock (Dot Clock)

You may find that pictures blur, depending on the clock frequency of your PC’s processor.

If you experience blurring, you can obtain a clearer picture by adjusting the “Dot Clock”.

Use or to select a value between -60 and +60.

Press to store.

• Adjusting Clock Phase (Clock Phase)

You may find that pictures blur, depending on the clock phase of your PC’s processor. If you
experience blurring, you can obtain a clearer picture by adjusting the “Clock Phase”.

Use or to select "Auto" or "Manual".

Auto: Makes automatic adjustment.

Manual: Makes manual adjustment.

Use or to specify a value between 1 and 32.

Press to store.

English

When selecting Manual by Clock Phase

• Adjusting Clamp Position (Clamp Position)

Adjusts clamp pulse in accordance with the input signal received from connected equipment.

Use or to specify a value between -8 and 8.

Press to store.

• Selecting the Optimum Dynamic Range of Images (Auto Calibration)

Receives a white screen signal and adjusts the dynamic range of images to the optimum.

(1) Select Auto Calibration and press .

Auto Calibration screen appears.

(2) Select Execute and press .

Press or to select Yes or No.

Yes: Stores the data of Auto Calibration.

No: Disables the execution result of Auto Calibration.

(3) Press to execute.

"Auto Calibration" setting screen

"Yes/No" screen to select

* On-screen information disappears if you do not take any action for about 60 seconds.

E-27

OTHER ADJUSTMENTS (FEATURES MENU)(Continued)

ON SCREEN MENU

• Setting Display Information (OSD)

You can use this option to select whether to display information other than menus. (Error messages

are displayed regardless of what choice you make for this option.)

Each time you press , one of the available choices appears in the following sequence:

On Off

On : Displays all information.

Off : Displays only menus and error messages.

Press to store.

• Selecting Language (Language)

You can use this option to select the language displayed on the screen.

(1) Select “Language” and press .

The “Language” selection screen will appear.

(2) Press or to select your desired language.

English

Deutsch (German)

Español (Spanish)
Français (French)

Italiano (Italian)

Português (Portuguese)
Pyccкий(Russian)

(3) Press .

The menu is displayed in the selected language.

* Russian can only be set with the E-model.

"Language" selection screen

E-28

INPUT TERMINAL

1234567890123456789012345678901

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1234567890123456789012345678901

1234567890123456789012345678901

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1234567890123456789012345678901

• Selecting BNC Input (BNC-Input)

You can use this option to select the signal system it will receive to BNC Input terminal.

(1) Select BNC Input and press .

BNC Input screen appears.

(2) Select the signal system to receive.

Each time you press or , one of the available choices appears in the following

sequence:

RGB-PC: For using PC wih RGB signal input.

Decoder: For using decoder with RGB signal input.

(3) Press or to select Mask.

(4) Select RGB-Video or Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following

sequence:

Off: Does not mask.

Number:

(5) Press to store.

Masks the fringe (top, bottom, right and left) of the screen by the number of pixels specified.

"BNC-Input" selection screen

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

This fringe part is masked.

English

• Selecting D-SUB Input (D-SUB Input)

You can use this option to select the signal system it will receive to D-SUB Input terminal.

(1) Select D-SUB Input and press .

D-SUB Input screen appears.

(2) Select the signal system to receive.

Each time you press or , one of the available choices appears in the following

sequence:

RGB-PC Decoder

RGB-PC: For using RGB for PC

Decoder: For using digital broadcast tuner

(3) Press or to select Mask.

(4) Select Decoder by FUNCTION to set up Mask.

Each time you press or , one of the available choices appears in the following
sequence:

Off: Does not mask.

Number: Masks the fringe (top, bottom, right and left) of the screen by the number of

pixels specified.

(5) Press to store.

"D-SUB Input" selection screen

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

23456789012345678901234567890

This fringe part is masked.

* On-screen information disappears if you do not take any action for about 60 seconds.

E-29

OTHER ADJUSTMENTS (FEATURES MENU)(Continued)

OTHERS MENU

• Selecting time before DPMS starts (DPMS)

You can use this option to select the amount of time before the DPMS function starts.

DPMS (which stands for “display power management signaling”) allows the display to maintain an
automatic power saving function.

This function causes on-screen information to disappear until the next input operation, if the power
is ON and the display has not received any signals for the predetermined period of time. When

DPMS is active, the power indicator lamp turns orange.

(1) Select DPMS and press .

DPMS screen appears.

(2) Press or to select Time.

(3) Each time you press or , one of the available choices appears in the following sequence:

Off: Disables DPMS

Number: Approximate time before DPMS starts. (Unit: minutes)

* The power indicator lamp turns orange while the DPMS is ON.

* The power turns ON automatically when the display receives a signal.

(4) Can specify background color.

Press or to select background color.

Each time you press or , one of the available choices appears in the following sequence:

Black White

Black: Mutes images in Black background.

White: Mutes images in White background.

* Switches approx. 20 seconds after the display stops receiving signals.

(5) Press to store.

DPMS selection screen

• Selecting input terminals (Audio Input)

You can use this option to select one of the three available terminals to receive sound from input

equipment.

(1) Select “Audio Input” and press .

The “Audio Input” selection screen will appear.

(2) Press or to select input equipment.

(3) Select a desired input terminal.

Each time you press or , one of the available choices appears in the following sequence:

No audio: No sound in the corresponding mode.

Audio 1-3: Selects Audio 1 through 3 for receiving sound in the corresponding mode.

* Repeat steps (2) and (3) for each piece of input equipment.

(4) Press to store.

* Audio Input menu will not be displayed when "No Audio"is selected.

* Cannot be set with P42VCA10/P42HCA10/P50XCA10/P42VCA20.

“Audio Input” selection screen

E-30

• Minimizing phosphor burn-in (Screen Orbiter)

You can use this option to move the screen position to minimize phosphor-induced “burn-in”.

Follow the steps below.

(1) Select “Screen Orbiter” and press .

The “Screen Orbiter” setting screen will appear.

(2) Press or to select “Mode/Time”.

(3) Select a desired pattern.

Each time you press or , one of the available choices appears in the following sequence:

Off: Disables Screen Orbiter.

Time: Moves the pattern approximately every one hour.

Mode: Moves the pattern when the power is turned ON or when you switch between modes.

(4) Press or to select “Moving Area”.

(5) Press or to select the range for moving the pattern.

Each time you press or , one of the available choices appears in the following sequence:

Min.: Pattern moves in small range. (About 5 pixels)

Std.: Pattern moves in moderate range. (About 10 pixels)

Max.: Pattern moves in wide range. (About 15 pixels)

(6) Press to store.

English

“Screen Orbiter” setting screen

Using screen protection functions (examples)

The screen protection functions minimize phosphor burn-in but cannot completely eliminate it.

When using the display occasionally

• Select a desired amount of time for “DPMS”.
Thus, when the display does not receive a signal, it will automatically
display white or black over the entire screen. When the predetermined
time elapses, the power will turn OFF.

• Input mode of priority (Input Priority)

You can use this option to switch between modes only when a signal is received through the

selected input mode terminal. You cannot switch the input mode.

Each time you press or , one of the available choices appears in the following sequence:

Off: Switches between modes normally.

RGB1, RGB2: Displays pictures when a signal is received through the selected input mode

terminal.

Press to store.

When using the display continuously

When switching input mode occasionally

(1) Select “Time” for “Mode/Time” with “Screen Orbiter”.
(2) Select a desired range for “Moving Area” with “Screen Orbiter”.

This causes the screen saver pattern to move in the same range at
regular intervals.

When switching input mode frequently

(1) Select “Mode” for “Mode/Time” with “Screen Orbiter”.
(2) Select a desired range for “Moving Area” with “Screen Orbiter”.

When input mode is switched, the display position moves.

* On-screen information disappears if you do not take any action for about 60 seconds.

E-31

OTHER ADJUSTMENTS (FEATURES MENU)(Continued)

• Assigning Numbers to Displays (Monitor No.)

When you use two or more displays, you can use a single remote control to control individual

displays by assigning a unique number to each of the displays.

Each time you press or , one of the available numbers appears in the following sequence:

0: You can normally control displays.

You cannot control displays if you press any of [SHIFT 1] through [SHIFT 4].

1–4: Allows you to control a desired display by pressing the corresponding button (one of

[SHIFT 1] through [SHIFT 4]).

When you do not press any of the SHIFT buttons, you can control all displays.

Press to store.

* You can check the “Monitor No.” on the Information screen. (See P. E-33.)

• Setting RGB Input Signal Compulsorily (Direct Setting)

You can use this option to switch the setting for RGB input signal.

Each time you press or , one of the available choices appears in the

following sequence:

For RGB mode:

Auto: The optimum display is obtained automatically for input signals.
Others: The optimum resolution setting is fixed for each signal.

Press to store.

* In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may

not be automatically distinguished. Switch to the fixed display when the image is not displayed

properly.

• Specifying RGB Input Signal (Code Setting)

You can use this option to specify and display the type of RGB input signal by code number.

Each time you press or , one of the available choices appears in the following

sequence:

Auto Manual

Auto: Automatically displays the input signal to the optimum.
Manual: Selects RGB code number.

Press to store.

* In Auto mode, the optimum resolution may not be set up automatically depending on the type of

signal.

Select the type of signal when the image is not displayed properly.

However, note that when the type of signal is selected directly, the signal of other resolution
may not be displayed properly.

• Displaying white over entire screen (White Screen)

You can use this option to display white over the entire screen to minimize phosphor burn-in.

Each time you press or , one of the available choices appears in the following sequence:

On Off

Off: Does not display white.
On: Displays a white screen immediately.

Press to store.

"Code Setting" setting screen

E-32

• Setting Exhibition Mode (Exhibition Mode)

You can use this option to display the enhanced contrast, which is most suitable for the use by

unspecified persons.

Each time you press or , one of the available choices appears in the following sequence:

On Off

On: Sets up Exhibition mode.

Off: Sets up normal mode.

Press to store.

* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the

adjustment is changed.

* The setup will be cancelled when removing the power plug from the receptacle.

• Horizontal/Vertical installation (Installation)

You can use this option to setup the number of fan rotation and the direction of display text of menu
or other screen for horizontal and vertical installation.

Each time you press or , one of the available choices appears in the following sequence:

English

-90 Deg. :

Normal : Displays text normally.

+90 Deg. :

Press to store.

* Be sure to make this setup when changing the direction of installation.

Displays text from left to right when the display is installed with the power indicator lamp at the top.

Displays text from left to right when the display is installed with the power indicator lamp at the bottom.

• Displaying System Status (Information)

Displays system operation status.

Select “Information” and press .

The “Information” screen will appear.

Mode: Input mode

Monitor No.: Monitor number

Freq. Scan Mode: Frequency scanning

Input Sync.: Signal type

Freq.: Frequency and polarity (fH, fV)

Preset No.: RGB code number

Information screen (RGB2 Input Mode)

* On-screen information disappears if you do not take any action for about 60 seconds.

E-33

INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT)

You can restore the values of the adjustment/setting made in the MENU to factory settings.

* You can also use the

switches on the display’s
control panel to accomplish
these steps.

1

2

3

4

Press .

The main menu screen will appear.

Press or to select “FACTORY
DEFAULT”.

Each time you press or , one of the available
menus appears in the following sequence:

PICTURE POSITION/SIZE AUDIO FEATURES FACTORY DEFAULT

The FACTORY DEFAULT Menu screen will
appear.

Press .

• Displays the message of whether to proceed
with the initialization.

Press or to select the Yes.

“FACTORY DEFAULT” selected in the
main menu screen

Displays the message of whether to
proceed the initialization

5

Press

• The message of having completed the
initialization will be displayed after initializing.

Press when you finish.

.

Displays the message of having
completed the initialization

E-34

OPTIONS

Wall-mounting unit 0° to 15° mounting angle P-WB4200

Hanging unit 0° to 15° mounting angle P-CT4200

Stand P-TT4200

English

Speaker P-42SP11 (for 42”)

P-50SP01 (for 50”)
(1 set of 2 speakers)

Speaker Stand P-42ST11 (for 42”)

P-50ST01 (for 50”)
(1 set of 2 speakers stands)

* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.

* The colors of options do not match the display colors perfectly.

Warning

To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.

CAUTION: This display (P42VCA10/P42VCA11/P42VCA12/P42HCA10/P42HCA11/P42HCA12/

P50XCA10/P50XCA11/P50XCA12/P42VCA20/P42VCA21/P42VCA22) is for use only with
Fujitsu General Limited’s option (P-WB4200, P-CT4200, P-TT4200).
Using this display with other option can cause instability resulting in possible injury.

E-35

FACTORY SETTINGS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value
of the first input signal.

To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-22–E-23 to adjust the
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be
displayed in accordance with the settings you most recently selected.

Main corresponding signals (RGB mode)

Display (dots x lines)

640 x 480 31.47 59.94 VGA

640 x 480 37.50 75.00 VGA 75 Hz

640 x 480 43.27 85.01 VGA 85 Hz

720 x 400 31.47 70.09 400 lines

800 x 600 37.88 60.32 SVGA 60 Hz

800 x 600 46.88 75.00 SVGA 75 Hz

800 x 600 53.67 85.06 SVGA 85 Hz

1024 x 768 48.36 60.00 XGA 60 Hz

1024 x 768 60.02 75.03 XGA 75 Hz

1024 x 768 68.68 84.99 XGA 85 Hz

1280 x 1024 63.98 60.02 SXGA 60 Hz

1280 x 1024 79.98 75.03 SXGA 75 Hz

1600 x 1200 75.00 60.00 UXGA 60 Hz

1600 x 1200 106.25 85.00 UXGA 85 Hz

848 x 480 31.02 60.00

852 x 480 31.72 59.97

1360 x 768 47.71 60.01

720 x 485 15.73 59.94 60 fields

720 x 575 15.63 50.00 50 fields

* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make

sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.

Horizontal frequency (kHz) Vertical frequency (Hz)

Signal

• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.

• “Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.

• You can check input signals through “Information” on the FEATURES Menu screen. (See P. E-33.)

• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.

• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

E-36

SPECIFICATION

Model P42VCA10W/E/A P42VCA11W/E/A P42VCA12W/E/A

Screen size 42" wide screen:

Aspect ratio 16:9 (wide)

Weight 28.5 kg / 62.8 lbs

Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm

Power supply 110–240 VAC 50/60 Hz

Current rating 3.0–1.3 A 3.1–1.4 A 3.0–1.3 A

Number of pixels 852 (H) x 480 (V)

Display modes RGB: Normal/Wide/Zoom

Colors 16.77 million

Sound output — 2.5 W + 2.5 W (EIAJ), 8 Ω

Speaker — 2-internal

External equipment terminals

PC input terminal RGB1 input mD-sub, 3 rows, 15-pin

Sound terminals

Control terminal 1 RS-232C connector (D-sub 9-pin)

External speaker output terminal

Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F

Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,

92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal)

36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)

40.7 (W) x 25.2 (H) x 3.3 (D) inch

Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level

RGB2 input BNC terminal x 5 R: 0.7 Vp-p/75 Ω

G: 0.7 Vp-p/75 Ω
B: 0.7 Vp-p/75 Ω
H: TTL Level or ANALOG (75 Ω)
V: TTL Level or ANALOG (75 Ω)

—

—

Humidity: 20 to 80 %

2 small ferrite cores (P42VCA11)

2 sound input pin jacks (L/R) (3 lines)
500 mVrms/ at least 22 kΩ

Effective max. output:
10 W + 10 W (EIAJ), 8 Ω

—

English

Regulation --- P42VCA10W/E/A, P42VCA11W/E/A, P42VCA12W/E/A

• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class A, ICES-003 Class A

• CE Safety: EN60065
EMC: EN55022 1998, Class A

EN61000-3-2 1995
EN61000-3-3 1995
EN55024 1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993
EN61000-4-11 1994

• AS Safety: IEC60065
EMC: AS/NZS 3548

E-37

SPECIFICATION (Continued)

Model P42HCA10W/E/A P42HCA11W/E/A P42HCA12W/E/A

Screen size 42" wide screen:

Aspect ratio 16:9 (wide)

Weight 28.5 kg / 62.8 lbs

Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm

Power supply 110–240 VAC 50/60 Hz

Current rating 4.3–1.8 A 4.4–1.9 A 4.3–1.8 A

Number of pixels 1024 (H) x 1024 (V)

Display modes RGB: Normal/Wide/Zoom

Colors 16.77 million

Sound output — 2.5 W + 2.5 W (EIAJ), 8 Ω

Speaker — 2-internal

External equipment terminals

PC input terminal RGB1 input mD-sub, 3 rows, 15-pin

Sound terminals

Control terminal 1 RS-232C connector (D-sub 9-pin)

External speaker output terminal

Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F

Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,

92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal)

36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)

40.7 (W) x 25.2 (H) x 3.3 (D) inch

Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level

RGB2 input BNC terminal x 5 R: 0.7 Vp-p/75 Ω

G: 0.7 Vp-p/75 Ω
B: 0.7 Vp-p/75 Ω
H: TTL Level or ANALOG (75 Ω)
V: TTL Level or ANALOG (75 Ω)

—

—

Humidity: 20 to 80 %

2 small ferrite cores (P42HCA11)

2 sound input pin jacks (L/R) (3 lines)
500 mVrms/ at least 22 kΩ

Effective max. output:
10 W + 10 W (EIAJ), 8 Ω

—

Regulation --- P42HCA10W/E/A, P42HCA11W/E/A, P42HCA12W/E/A

• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class A, ICES-003 Class A

• CE Safety: EN60065
EMC: EN55022 1998, Class A

EN61000-3-2 1995
EN61000-3-3 1995
EN55024 1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993

• AS Safety: IEC60065

EN61000-4-11 1994

EMC: AS/NZS 3548

E-38

Model P50XCA10W/E/A/U P50XCA11W/E/A/U P50XCA12W/E/A/U

Screen size 50" wide screen:

110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal)

43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal)

Aspect ratio 16:9 (wide)

Weight 45.0 kg / 99.2 lbs

Outer dimensions 121.2 (W) x 72.6 (H) x 9.8 (D) cm

47.7 (W) x 28.6 (H) x 3.9 (D) inch

Power supply 220–240 VAC 50/60 Hz (W/E/A)

120 VAC 50/60 Hz (U)

Current rating 2.6–1.9 A (W/E/A) 2.7–2.0 A (W/E/A) 2.6–1.9 A (W/E/A)

4.8 A (U) 4.9 A (U) 4.8 A (U)

Number of pixels 1366 (H) x 768 (V)

Display modes RGB: Normal/Wide/Zoom

Colors 16.77 million

Sound output — 2.5 W + 2.5 W (EIAJ), 8 Ω

Speaker — 2-internal

External equipment terminals

PC input terminal RGB1 input mD-sub, 3 rows, 15-pin

Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level

RGB2 input BNC terminal x 5 R: 0.7 Vp-p/75 Ω

G: 0.7 Vp-p/75 Ω
B: 0.7 Vp-p/75 Ω
H: TTL Level or ANALOG (75 Ω)
V: TTL Level or ANALOG (75 Ω)

Sound terminals

—

2 sound input pin jacks (L/R) (3 lines)
500 mVrms/at least 22 kΩ

Control terminal 1 RS-232C connector (D-sub 9-pin)

External speaker output terminal

—

Effective max. output:
10 W + 10 W (EIAJ), 8 Ω

—

Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F

Humidity: 20 to 80 %

Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,

2 small ferrite cores (P50XCA11)

English

Regulation --- P50XCA10W/E/A/U, P50XCA11W/E/A/U, P50XCA12W/E/A/U

• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class A, ICES-003 Class A

• CE Safety: EN60065
EMC: EN55022 1998, Class A

EN61000-3-2 1995
EN61000-3-3 1995
EN55024 1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993
EN61000-4-11 1994

• AS Safety: IEC60065
EMC: AS/NZS 3548

E-39

SPECIFICATION (Continued)

Model P42VCA20W/E/A/U P42VCA21W/E/A/U P42VCA22W/E/A/U

Screen size 42" wide screen:

Aspect ratio 16:9 (wide)

Weight 29.5 kg / 65.0 lbs

Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm

Power supply 220–240 VAC 50/60 Hz (W/E/A)

Current rating 1.7–1.4 A (W/E/A) 1.8–1.5 A (W/E/A) 1.7–1.4 A (W/E/A)

Number of pixels 852 (H) x 480 (V)

Display modes RGB: Normal/Wide/Zoom

Colors 16.77 million

Sound output — 2.5 W + 2.5 W (EIAJ), 8 Ω

Speaker — 2-internal

External equipment terminals

PC input terminal RGB1 input mD-sub, 3 rows, 15-pin

Sound terminals

Control terminal 1 RS-232C connector (D-sub 9-pin)

External speaker output terminal

Operating conditions Temperature: 0 to 40 °C / 32 to 104 °F

Accessories 1 remote control, 2AA batteries, 1 instruction manual, 1 power cable, 2 big ferrite cores,

92.0 cm (W) x 51.8 cm (H) (106.0 cm diagonal)

36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)

40.7 (W) x 25.2 (H) x 3.3 (D) inch

120 VAC 50/60 Hz (U)

4.2 A (U) 4.3 A (U) 4.2 A (U)

Picture signal: 0.7 Vp-p/75 Ω
Synchronization signal:TTL level

RGB2 input BNC terminal x 5 R: 0.7 Vp-p/75 Ω

G: 0.7 Vp-p/75 Ω
B: 0.7 Vp-p/75 Ω
H: TTL Level or ANALOG (75 Ω)
V: TTL Level or ANALOG (75 Ω)

—

—

2 sound input pin jacks (L/R) (3 lines)
500 mVrms/ at least 22 kΩ

Effective max. output:
10 W + 10 W (EIAJ), 8 Ω

Humidity: 20 to 80 %

2 small ferrite cores (P42VCA21)

—

Regulation --- P42VCA20W/E/A/U, P42VCA21W/E/A/U, P42VCA22W/E/A/U

• UL, CSA Safety: UL6500, C-UL
EMC: FCC Part 15 Class A, ICES-003 Class A

• CE Safety: EN60065
EMC: EN55022 1998, Class A

EN61000-3-2 1995
EN61000-3-3 1995
EN55024 1998
EN61000-4-2 1995
EN61000-4-3 1996
EN61000-4-4 1995
EN61000-4-5 1995
EN61000-4-6 1996
EN61000-4-8 1993

• AS Safety: IEC60065

• Specifications and external appearance may be change for the sake of improvement.

• is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.

EN61000-4-11 1994

EMC: AS/NZS 3548

E-40

CLEANING AND MAINTENANCE

Precautions

Be sure to remove the power plug from the receptacle before
cleaning the display.
Be sure not to clean the display using a cloth dampened with
volatile solvents, such as benzene or thinner. Such solvents can
harm the display’s cabinet, the filter at the screen front, and the
remote control. They can also cause paint to come off these
sections.

Cleaning the Screen

Clean the screen gently with a soft cloth.
The screen surface is fragile. Never attempt to clean it with a hard
material, press on it forcefully, or tap it.

HANDY TIPS

In the event of problems with the display, check the following explanations before contacting your dealer for servicing.

Cleaning the Cabinet and Remote Control

Use a soft cloth for cleaning.
If the cabinet or remote control is heavily stained, soak a soft cloth
in a mixture of water and detergent and squeeze it dry before
wiping off the stains. Use a soft, dry cloth for final cleaning.

Cleaning the ventilation grille

Remove dust from the ventilation grille in the rear of the main unit
periodically with a vacuum cleaner as the accumulated dust can
increase the internal temperature of the main unit causing machine
failure or fire hazard.

English

Problem

• Power does not turn ON.

• No pictures are displayed.

• Remote control does not function properly.

• The display makes a snapping sound.

• The display makes a buzzing sound.

• There are spots on the screen.

• Improper screen position/size

• No sound from external speakers

• No sound

• If “Invalid operation” appears.

• If “Out of range” appears, the display is

receiving a signal whose picture or signal
cannot be reproduced by the display.

• The screen turns to black and white.

• If “Error message Condition 1” appears,

the fan is defective.

• If “Error message Condition 2” appears,

the display’s internal components are
extremely hot.

• If "Change refresh rate to 60Hz"appears,

• If the power indicator lamp flashes red.

Action

• Check whether the power plug is securely inserted into the receptacle.

• Check cables for disconnection.

• Check whether the power for all input equipment is ON.

• Check for connection to wrong terminals or for wrong input mode.

• Check whether the input mode display is colored pink.Special setup may have been
made. Return to original setup or initialize the User adjustment value.

• Check for incorrect battery orientation.

• Check for dead batteries.

• Check for distance from the display.

• Check whether you are pointing the remote control transmitter properly at the display’s
receiver.

• Check for any obstacle between the remote control and the display.

• This sound is produced when the cabinet expands or contracts due to variations in
temperature. This sound does not indicate that the display has a problem.

• The display has fans to maintain the temperature of internal components at a constant
level. This sound is produced by the fan as it rotates.

• Check whether your AV equipment is affected by interference from automobiles, trains,
high-voltage transmission lines, neon signs or other potential sources of interference.

• Check whether screen position and size have been properly adjusted.
(See “Adjusting Screen Position and Size” on P. E-20–E-21.)

• Check cables for disconnection.

• Check whether you have selected “No Audio” for the “Audio Input” setting.
(See “Features” on P. E-30.)

• Check whether you have selected “Input Priority”.(See “Features” on P. E-31.)

• Input proper signals.
Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA /
XGA / UXGA, 75 Hz or less for SXGA.

• Remove the power plug from the receptacle, and contact your dealer for repairs.

• Remove the power plug from the receptacle. (You can turn the power back ON again
when the components have cooled sufficiently.) If the message appears again when you
turn the power back on, remove the power plug from the receptacle, and contact your
dealer for a repairs.

• The picture may get blurred with vertical frequency of other than 48.3-51.8 or 58.4-61.4
(Hz). Change the setting of your PC, etc.

• Remove the power plug from the receptacle, and inform your dealer about how the lamp
flashed.
As explained below, the power indicator lamp flashes differently depending on the type
of problem:
– Flashes repeatedly: Improper supply voltage level
– Flashes once: Malfunction by the fan
– Flashes twice: Excessive temperature
– Flashes three times or more: Other problems

E-41