Fujitsu P728 User Manual

Download

Operating Manual

FUJITSU LIFEBOOK P728

System

Contact address in North America

FUJITSU AM

ERICA INC.

1250 East Arques Avenue, Sunnyvale,

CA 94085-3470, U.S.A.

e: 800 831 3183 or 408 746 6000

Telephon

"http://solutions.us.fujitsu.com"

"http://solutions.us.fujitsu.com/contact"

estion? Email us at: "AskFujitsu@us.fujitsu.com"

Have a qu

ujitsu America, Inc. All rights reser

FPC65-7866-01

ved

FUJITSU LIFEBOOK P7288

Operating Manual

Declarations of conformity

Fujitsu Contact Information

Ports and controls

Important notes

First-time setup of your device

Working with the notebook

Security functions

Connecting external devices

Removing and installing components

during servicing

Settings in BIOS Setup Utility

Troubleshooting and tips

Technical data

Manufacturer’s notes

FCC and IC Regulatory Information

Appendix

102

105

109

Index

121

Fujitsu America, Incorporated has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.

Fujitsu, the Fujitsu logo and LIFEBOOK are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries.

Intel and Intel Core are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Bluetooth is a trademark of Bluetooth SIG, Inc., USA.

The terms HDMI and HDMI High-Deﬁnition Multimedia Interface and the HDMI Logo are either a registered trademarks or trademarks of HDMI Licensing, LLC in the United States and/or other countries.

Adobe, Acrobat, and Adobe Reader are either a registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

USB Type-C is a trademark or registered trademark of the USB Implementers Forum in the USA and other countries.

USB Type-C is a trademark or registered trademark of the USB Implementers Forum in Canada and other countries.

All other trademarks speciﬁed here are the property of their respective owners.

Contents

Declarationsofconformity ............................................................. 7

Fujitsu Contact Informatio

Notational conventions .................................................................. 10

Portsand controls ..................................................................... 11

Important notes ........................................................................ 14

Safety instructions ...................................................................... 15

Additional safety note

Energy saving .......................................................................... 16

Energy saving under Wi

Traveling with your n

Before you travel ................................................................... 17

Transporting the n Storing the notebo Cleaning the noteb

Further informat

First-time setup of yourdevice ......................................................... 20

Unpacking and checking the device . . . ................................................... 20

Choose a location . ...................................................................... 21

Connecting the AC adapter . . . ........................................................... 21

Switching on the devicefortheﬁrsttime .................................................. 22

Installing Bonus Apps (Windows 10 Pro and Home conﬁgurations) . ..................... 23

Installing Bonus Apps (Windows 10 S conﬁgurations) . . . . . ............................. 23

Working with

Status indic Opening the Switching t

Programmin Different

Switchi Closing Handwri LCD scr Using t

Using

Keyb

ways to use your notebook . . . ...................................................

From note Select di From Tabl

ng off the notebook . . . . ...........................................................

the notebook . . ..................................................................

ting recognition ..................................................................

een ............................................................................

hedevice as aTabletPC ..........................................................

Using y Using

the deviceasa notebook ..........................................................

Tou c h

oard ...............................................................................

eysand function keys ...........................................................

Hot k

ksettings ......................................................................

F Loc

combinations ...................................................................

Key

tual numberkeys .................................................................

Vir

ntry and keyboardsettings .......................................................

Cou

bcam ...............................................................................

ok ....................................................................

ook ..................................................................

thenotebook ............................................................

ators ........................................................................

notebook ...................................................................

he notebook on . . . . ...........................................................

gtheON/OFF switch .....................................................

book to TabletPC ..........................................................

splay orientation(portraitor landscapeformat) .................................

etPCtonotebook ..........................................................

our ﬁngers ...................................................................

thestylus .....................................................................

pad and touchpadbuttons ......................................................

n ............................................................

s for devices with radio components . . . . . .............................

ndows .......................................................

otebook . . ...........................................................

otebook ...........................................................

ion on cleaningthenotebook ..........................................

16 17

18 18 19 19

24 27 28 28 29 29 30 31 32 33 33 34 34 34 35 39 39 40 43 45 45 47 47 48

Fujitsu 3

Contents

Rechargeable battery . . . ................................................................49

Charging,caringforandmaintaining thebattery ....................................... 49

Removing and installing the battery ................................................... 50

Using theenergysaving functions ........................................................ 53

Memory cards .......................................................................... 54

Supported formats .................................................................. 54

Insertingthememorycard ........................................................... 54

Removing the memorycard .......................................................... 55

Speaker and microphone ................................................................55

Optional wireless LAN / Bluetooth wireless components . . .................................. 56

Switching the wireless components on and off ......................................... 56

ConﬁguringWLANaccess ........................................................... 56

Further information on WLAN and Bluetooth ........................................... 56

Ethernet and LAN ....................................................................... 57

Your USB Type-C dock (optional) . ........................................................ 58

Ports on thedock ................................................................... 58

Setting up the dock .................................................................. 59

Connecting the AC adapter to the dock . . ............................................. 59

Connecting the notebook to the dock . . . . ............................................. 60

Switching on the notebook via the dock . . ............................................. 61

Switching offnotebook viadock ...................................................... 61

Disconnecting the notebook from the dock . . . ......................................... 61

Security functions ..................................................................... 62

Brief overviewofthesecurity functions .................................................... 63

Conﬁguring the ﬁngerprint sensor (conﬁguration dependent) . . .............................. 64

Conﬁguring the palm vein sensor (conﬁguration dependent) . . .............................. 65

Using theSecurity Lock ................................................................. 65

Conﬁguringpasswordprotectionin BIOSSetupUtility ...................................... 66

Protecting BIOS Setup Utility (supervisor password and user password) . . ............... 66

Password protection for booting the operating system .................................. 67

Password protectionforthe harddisk ................................................. 68

Smart Card reader (conﬁguration-dependent) ............................................. 68

InsertingtheSmartCard ............................................................. 68

Trusted Platform Module - TPM . . ........................................................ 69

Enabling TPM ....................................................................... 69

Disabling TPM ...................................................................... 69

Connecting externaldevices ........................................................... 70

HDMIport .............................................................................. 70

Connecting an external monitor . . ........................................................ 71

Connecting USB devices ................................................................72

USBport withchargingfunction (USB Type-C) ......................................... 73

USBport withchargingfunction (AnytimeUSBcharge) ................................. 74

Howtoremove USB devicescorrectly ................................................ 74

Headphones/microphone/Line-In/Line-Out/ headset-combi port . . . .......................... 75

Removing and installing components during servicing . . . .............................. 76

Notes on installing and removing boards and components .................................. 76

Preparing to remove components ........................................................ 77

Remove thecover ...................................................................... 78

Removing and installing memory expansion . .

............................................. 79

Removing a memorymodule ......................................................... 80

Installinga memorymodule .......................................................... 81

4 Fujitsu

Contents

Installing and removing an M.2 module ................................................... 82

Removing the M.2 module ........................................................... 82

InstallingtheM.2module ............................................................ 83

Attachingthe cover ..................................................................... 84

Finishing component removal . ........................................................... 85

Settings in BIOS Setup Utility . . . ....................................................... 86

Starting the BIOSSetupUtility ........................................................... 86

BIOS SetupUtilityoperation ............................................................. 87

Exiting BIOS SetupUtility ................................................................ 88

Exit Saving Changes - save changes and exit BIOS Setup Utility . . ..................... 88

Exit Discarding Changes - Reject changes and exit BIOS Setup Utility . . . . . .............. 88

Load Setup Defaults – load default values . ............................................ 88

Discard Changes - Discard Changes without exiting BIOS Setup Utility . . . . .............. 88

Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . . ............. 88

Save changesandpoweroff ........................................................ 88

Troubleshooting and tips .............................................................. 89

Help if problemsoccur ................................................................... 89

In the event you need to recover your system . ............................................ 89

The notebook’s date or time is incorrect ................................................... 90

Battery indicator does not illuminate . . . ................................................... 90

When certain characters are entered on the keyboard, only numerals are written ............. 90

The notebook’s LCD screen remains blank . . . . ............................................ 90

The LCD screen of the notebook is difﬁcult to read . ........................................ 91

Theexternal monitorremains blank ...................................................... 91

Theexternal monitorisblankortheimageisunstable ..................................... 91

The cursor does not correctly follow the stylus movements . . . . ............................. 92

Stylus input not working ................................................................. 92

The notebook does not start after switching it on . . . ........................................ 92

The notebook stops working . . ........................................................... 93

The printer does not print . . . . . ........................................................... 93

The wireless connection to a network does not work . . . .................................... 93

Thebattery dischargestooquickly ........................................................ 94

Smart Card reader is not recognized . . . ................................................... 94

Smart CardPINforgotten ................................................................ 94

Smart Cardlost ......................................................................... 94

User and/or supervisor SmartCard lost ................................................... 95

Acoustic warning ........................................................................ 95

Error messagesonthescreen ........................................................... 95

Technical data ......................................................................... 97

Notebook .. ............................................................................. 97

WLAN speciﬁcations .................................................................... 99

USBType-Cdock(optional) ............................................................. 100

Rechargeablebattery ................................................................... 101

AC adapter for use with notebook and USB Type-C dock . . . . . . ............................. 101

Manufacturer’snotes .................................................................. 102

Disposal and recycling .................................................................. 102

Recyclingyourbattery ............................................................... 102

DOC(Industry CANADA)Notices ........................................................ 102

ULNotice ........................................................................... 103

ENERGY STAR Compliance ...........................................

.................. 104

Fujitsu 5

Contents

FCCRegulatory Information ........................................................... 105

RegulatoryNotesandStatements ........................................................ 105

Wireless LAN, HealthandAuthorizationforuse ........................................ 105

Regulatory Information/Disclaimers . . ................................................. 106

Federal Communications Commission statement: . . . . .................................. 106

FCCInterferenceStatement ......................................................... 106

FCC Radio Frequency Exposure statement .. . ......................................... 107

Export restrictions ................................................................... 107

Restrictions concernant l’exportation . ................................................. 107

Canada, Industry Canada(IC) .......................................................... 108

Canadian Notice . ....................................................................... 108

Avis pour le Canada .. . . . ................................................................109

Appendix ....................................................... ....................... 109

Before Using the Optional Wireless LAN . ................................................. 109

Wireless LAN Device

s Covered by this Document ........................ ............. 109

Characteristics of the WLAN Device ................................. .................109

Wireless LAN Modes Using this

. . ............................................. 109

Device

Deactivating/Disconnecting the WLAN Device ........................ ................. 112

Conﬁguring the Wireless LAN ....................................... .....................112

Conﬁguring the WLAN Using Windows . . . ............................................. 113

Connection to the network . . . ........................................................ 113

Troubleshooting the WLAN ........................................................... 114

Using the Bluetooth Device . ....................................... ......................115

Image Backup and Recovery Procedures ................................................. 116

Windows 10 Procedures . ............................................................ 116

Creating a recovery drive ......................................... ................... 116

Recovery options in Windows 10 ..................................... ................116

Downloading driver updates . ............................................................ 12

Index .......................................................... ........................ 121

6 Fujitsu

Declarations of conformity

DECLARATION OF CONFORMITY

according to FCC Part 15

Responsible Party Name: Address:

Telephone: Declares that product:

This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

This device is compliant with SAR or general population / uncontrolled exposure limits of FCC rules and KDB procedures tested in accordance with IEEE1528:2013 standards. This device has been tested and meets the FCC IC RF exposure guidelines when tested with the device operation conditions.

Fujitsu America, Inc. 1250 E. Arques Avenue Sunnyvale, CA 94085 (408) 746-6000 Base Model Configuration: LIFEBOOK P728 Notebook Complies with Part 15 of the FCC Rules.

Fujitsu 7

Declarations of conformity

1 = Declaration o

8 Fujitsu

f conformity

Fujitsu Contact Information

Service and Support

You can contact Fujitsu Service and Support in the following ways:

• Toll free phone: 1-800-8Fujitsu (1-800-838-5487)

• Website: "

Fujitsu Shopping Online

Please go to "

Maintaining Latest Conﬁguration

To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Software Download Manager (FSDM) utility. The FSDM utility is available from the Fujitsu Support site. FSDM will allow you to view a list of the most current drivers, utilities and applications to determine whether you have the latest versions. If you have a Windows 10 operating system, you will need to go to the Support Site to download the FSDM Utility: "

Limited Warranty

Your LIFEBOOK notebook is backed by a Fujitsu International Limited Warranty. Check the Limited Warranty Terms and Conditions Booklet that came with your notebook.

http://solutions.us.fujitsu.com/www/content/support/contact/index.php"

Before you place the call, have the following information ready so that the customer support representative can provide you with the fastest possible solution:

• Product name

• Product conﬁguration number

• Product serial number

• Purchase date

• Conditions under which the problem occurred

• Any error messages that have occurred

• Type of device connected, if any

http://www.shopfujitsu.com/store/ ".

http://support.fujitsupc.com/CS/Portal/support.do?srch=DOWNLOADS".

Fujitsu 9

Fujitsu Contact Information

Notational conventions

Pay particular attention to text marked with this symbol. Failure to observe this warning will endanger your life, will damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings.

Indicates important informa

tion which is required to use the device properly.

►



This style

"This style" indicates

Key

This style indicates terms and text that are emphasized or highlighted, e.g.: Do not

indicates an activity that must be performed indicates a result

indicates data entered the command line, e.g. start a program (star

indicates information that is displayed on the screen by a program, e.g.:

Installation is complete.

indicates

• terms and texts used in a software interface, e.g.: Click on Save.

• names of programs or ﬁles, e.g. Windows or setup.exe.

• Cross-references to another section, e.g. "Safety information"

• cross-references to an external source, e.g. a web address: For more information, go to "

• names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual

indicates a key on the keyboard, e.g:

switch off the device

using the keyboard in a program dialogue or at

your password (Name123) or a command used to

t.exe)

http://solutions.us.fujitsu.com/"

F10

10 Fujitsu

Ports and controls

This chapter presents the individual hardware components of your device. It gives an overview of the indicators and connections of the device. Please familiarize yourself with these items before you start to work with the device.

Notebook open

1 = Microphone 2 = Webcam 3 = Webcam LED 4 = Speaker 5 = Status indicators

Fujitsu 11

6 = Fingerprint sensor or palm sensor

(conﬁguration dependent) 7 = Touchpad buttons 8 = Touchpad 9 = Ambient light sensor

Ports and controls

Left side

1 2 3 45

1 = DC input connector (DC IN) 2 = LAN port 3 = USB 3.1 port with charging function

(USB Type-C

™

)

Right side

2 3 91056 781

1 = Slot for stylus 2 = Fastening eyelet for optional stylus tether 3 = ON/OFF switch 4 = Power-on indicator 5 = Combined headphones/microphone port

4 = USB 3.0 port with charging function

(Anytime USB charge)

5 = SmartCard reader

6 = Memory card slot 7=USBport3.0 8 = HDMI port 9 = External monitor port (VGA) 10 = Security Lock device

12 Fujitsu

Bottom

2 3

Ports and controls

1 = Battery comp 2 = Battery lock slider switch 3 = Battery rep

Fujitsu 13

artment

lacement status indicator

4 = Memory upgra

M.2 module

de compartment and

Important notes

ImportantnotesNotes

This chapter contains essential safety information which must be followed when working with your notebook. Other notes also provide useful information which will help you with your notebook.

14 Fujitsu

Safety instructions

SafetyinformationInformation,

Please observe the following safety information. Please pay special attention to the sections in the manual marked

with the symbol on the left. When connecting and disconnecting cables, observe the relevant

notes in this operating manual. Read the information on the ambient conditions in the "

chapter and the "First-time setup of your device", Page 20 chapter before preparing your notebook for use and switching it on for the ﬁrst time.

When cleaning the device, please observe the relevant notes in the section "

Cleaning the notebook", Page 19.

Pay attention to the additional safety notes for devices with radio components provided in the "Safety/Regulations" manual.

Please refer to the notes in the chapter "

components during servicing", Page 76.

When handling this device, you will come into contact with lead, a chemical which in California is held to be a possible cause of birth defects and other damage to fertility.

Wash your hands after using the device. Avoid placing your computer on uneven or unstable work surface. Do not place objects or apply heavy pressure on your computer. Do not apply too much force to the display corners. Do not rotate display with excessive force. Do not pick up or hold the computer by display only. Do not shake or bump the display. Avoid excessive vibration and shocks. Avoid excess force when tapping or writing on the screen. Do not block the air vents. Do not leave the computer turned on when enclosed in briefcase or backpack. In the event you drop your notebook or damage the the housing in any way,

immediately turn off power and disconnect the power plug. Failure to do so could result in a short circuit, smoke, and/of ﬁre. Contact Fujitsu Service and Support to learn how to get the computer repaired.

Important notes

Technical data", Page 97

Removing and installing

tebook complies with the relevant safety regulations for data processing equipment.

This no

have any questions about setting up your notebook in the intended environment,

If you

e contact your sales outlet or our Hotline/Service Desk.

pleas

Fujitsu 15

Important notes

Additional safety notes for devices with radio components

RadiocomponentsWirelessLANBluetooth,Safetynotes

If a radio component (Wireless LAN, Bluetooth) is incorporated in your notebook, you must be sure to observe the following safety notes when using your notebook:

• Switch off the radio components when you are in an aircraft or driving in a car.

• Switch off the radio components when you are in a hospital, an operating room or near a medical electronics system. The transmitted radio waves can impair the operation of medical devices.

• Switch off the radio components, when you let the device get near ﬂammable gases or into hazardous environments (e.g. gas station, paintshops), as the transmitted radio waves can cause an explosion or a ﬁre.

For further information on how to switch the radio components on and off, refer to chapter "

Switching the wireless components on and off", Page 56.

Energy saving

NotesEnergyPowersaving

Switch the notebo they are not in use will then be able

Energy savin

► Make use of the available energy saving functions as described in chapter

Using the energy saving functions", Page 53.

ok off when it is not in use. Switch off any connected external devices when

. If you use the energy saving functions, the notebook uses less power. You

to work for longer before having to recharge the battery.

The energy efﬁc You save money a

iency is increased and environmental pollution is reduced.

nd help protect the environment.

g under Windows

16 Fujitsu

Important notes

Traveling with your notebook

MobileoperationNotesTransportNotebook

Please observe the points listed below when traveling with your notebook.

Before you travel

► Back up important data stored on your hard disk.

NotebookTraveling,notebook

► Switch off the radio component for data security reasons. With data trafﬁc via a wireless

connection, it is also possible for unauthorized third parties to receive data.

Information on activating data encryption is provided in the documentation for your radio component.

► If you wish to use your notebook during a ﬂight, check with the ﬂight attendants if its use is safe.

When traveling in other countries

► If you are traveling abroad, check that the AC adapter can be operated with the local AC

voltage. If this is not the case, obtain the appropriate AC adapter for your notebook. Do not use any other converter!

► Check whether the local AC voltage and the AC cable are compatible. If this is not

the case, buy an AC cable that suits the local conditions.

► Enquire with the corresponding government ofﬁce of the country you will be traveling to,

whether you may use your notebook with its integrated radio component there.

► Take the necessary travel adapters with you when traveling abroad. Check the following

table to see which travel adapters you will need, or ask your travel organizer.

Power connection Travel destination

United States, Canada, Mexico, parts of Latin America, Japan, Korea, Philippines, Taiwan

Russia and the Commonwealth of Independent States (CIS), much of Europe, parts of Latin America, the Middle East, parts of Africa, Hong Kong, India, much of south-east Asia

United Kingdom, Ireland, Malaya, Singapore, parts of Africa

China, Australia, New Zealand

Fujitsu 17

Important notes

Transporting the notebook

Protect the notebook against severe shocks and extreme temperatures (e.g. direct sunlight in a car).

• Do not transport the notebook while it is switched on.

• Carry your notebook with you while traveling. Do not check it in as baggage.

• Never put your notebook through a metal detector. Have it hand-inspected by security personnel. You can, however, put your notebook through a correctly set X-ray machine. To avoid problems, place the notebook as close as possible to the entrance of the machine and remove it as soon as possible or have it hand-inspected by security personnel. Security ofﬁcials may require you to switch your notebook on. So make sure you have a charged battery on hand for this.

► Switch the notebook off ► Unplug the AC plug of the AC adapter and all external devices from the power outlets. ► Disconnect the AC ad ► To protect against damaging jolts and bumps, use a notebook carrying

case to transport your notebook.

apter cable and the data cables for all external devices.

Storing the notebook

• If storing your no remove and stor

• Store your notebook in a cool dry location. Temperatures should remain between 13 ºF / -25 ºC and 140 ºF / 60 ºC.

• Store your not battery insta addition, a f

• Always power

• It is possible that the notebook may not automatically go to power-off or sleep mode

• Attempti

tebook for a month or longer, turn it off, fully charge the battery, then

e all the Lithium Polymer batteries in a suitable location.

ebook and batteries separately. If you store your notebook with a lled, the battery will discharge, and battery life will be reduced. In aulty battery might damage your notebook.

off the notebook before transporting and/or packaging it. After shutt the power-

when you close the lid. This situation may occur due to pre-operating system boot password security settings or some other application running on the notebook.

the noteb

ing down the notebook, wait until the status LED panel indicates

off condition (i.e., no lights are illuminated).

ng to transport the notebook while power is on may damage

ook due to shock or overheating.

18 Fujitsu

Cleaning the notebook

• Use of incorrect cleaners can result in optical impairment of the LCD and / or damage to the notebook. Always refer to the cleaner manufacturer’s guidelines and material safety data sheets for proper handling and use of the products.

• Never use ammonia, acidic, or alkaline cleaners or organic chemicals such as paint thinner, acetone or kerosene. It may damage surface ﬁnishes and the coating of the LCD screen.

• Never use compressed air for cleaning the notebook.

• If your notebook has a Smart Card slot, be very careful to avoid any liquid entering the slot as this can damage the notebook.

Further information on cleaning the notebook

The notebook does not ﬂoat.

If the notebook is exposed to water or other liquids with its connections open, liquid can penetrate the notebook and cause a malfunction. Do not continue to use the notebook. Switch it off and contact our hotline / our service desk (see enclosed list of service desks or visit our website at: "

http://www.fujitsu.com/us/support/").

Important notes

Fujitsu 19

First-time setup of your device

First-time setup of your devic

First-timesetu pGettingstarted

When the device is delivered, the battery is located in the battery compartment. The battery must be charged if you want to operate your device using the battery.

When used on the move, the built-in battery provides the device with the necessary power. You can increase the operating time by using the available energy saving functions.

For instructions on how to connect external devices (e.g. mouse, printer) to your device, please refer to the operating manual for your device.

Unpacking and

► Unpack all the individual parts. ► Check your

Please read the chapter "Important notes", Page 14. If your device is equipped with a Windows operating system, the necessary

hardware drivers and supplied software are already pre-installed. Before switching it on for the ﬁrst time, connect the device to the AC voltageusing

the AC adapter, see " remain connected during the whole of the installation process.

A system test is performed when your device is ﬁrst switched on. Various messages can appear. The display may remain dark for a short time or may ﬂicker.

Please follow the instructions on the screen. NEVER switch off your device during the ﬁrst-time setup process.

Connecting the AC adapter", Page 21. The AC adapter must

checking the device

If you ﬁnd that damage has occurred during transport, please notify your local sales outlet immediately!

PackagingTransport

device for any visible damage which may have occurred during transportation.

You m a y ne you need t

20 Fujitsu

ed to reuse the packaging in the future, for example if

o ship your device.

Choosealocation

ChoosealocationSetupACadapter

Choose a suitable location for the device before setting it up. In doing so, please follow these instructions:

• Never place the device or the AC adapter on a heat-sensitive surface. The surface could be damaged as a result.

• Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage.

• The underside of the device heats up during normal operation. Prolonged contact with the skin can become unpleasant or even result in burns.

• Place the device on a stable, ﬂat, non-slippery surface. Please note that the rubber feet of the device may mark certain types of delicate surfaces.

• Keep other objects at least 100 mm / 3.94 inches away from the device and its AC adapter to ensure adequate ventilation.

• Never cover the ventilation openings of the device.

• Do not expose the device to extreme environmental conditions. Protect the device against dust, humidity and heat.

Connecting the AC adapter

MakingreadytouseACadapter

Observe the safety notes in the enclosed "Safety/Regulations" manual. The supplied AC cable conforms to the requirements of the country in which

you purchased your device. Make sure that the AC cable is approved for use in the country in which you intend to use it.

First-time setup of your device

► Connect the AC cable (1) to the AC adapter. ► Plug the AC cable (2) into a power outlet. ► Connect the AC adapter cable (3) to the

DC jack (DC IN) of the device.

Fujitsu 21

First-time setup of your device

Switching on the device for the ﬁrst time

Switchingonfortheﬁrsttime

To make it easier to use your device for the ﬁrst time, the operating system is pre-installed on the hard disk.

► Slide the ON/OFF switch (1) to the right to switch on the notebook.

The ON/OF



► During the installation process, follow the on-screen instructions.

22 Fujitsu

F switch returns automatically to its original position.

You can ﬁnd information and help on the Windows operating system functions on the Internet at "

http://windows.microsoft.com".

First-time setup of your device

Installing Bonus Apps (Windows 10 Pro and Home conﬁgurations)

BonusApps

Certain applications need to be activated before using your device. ► In order to activate these applications, click on the Start menu.

► Click on Settings. ► Select Extras. ► Click and open each of thes ► Repeat these steps for each user account.

Note that in some cases (depending upon which application was selected for installation) after installation completes, the system will prompt you to reboot.

There are also cases in which if multiple applications are selected to install but one of them needs a reboot, the system will reboot and continue installing the rest of the selected applications.

e applications.

Installing Bonus Apps (Windows 10 S conﬁgurations)

The following applications need to be activated before using your device.

• Battery Change Utility

• Battery Utility

• FUJ02E3 Device Utility

• LIFEBOOK Application Panel

• Mic Mute Utility

• Pen Low Battery Notiﬁcation

• Pointing Device Utility for P728 ► In order to activate these applications, click on the Start menu. ► Click on Settings. ► Select Extras. ► Restart the system to see those application in the Start menu.

Fujitsu 23

Working with the notebook

Operation,notebookNotebook

This chapter describes the basics for operating your notebook. Please refer to

Connecting external devices", Page 70 for instructions on how to connect external

devices such as a mouse and a printer to the notebook.

Please refer to the notes in the chapter "Important notes", Page 14.

Status indicators

Statusindicators

The status indicators provide information about the status of the power supply, the hard disks and the keyboard functions.

24 Fujitsu

Display Description

Power-on indicator/Standby

StandbyindicatorPower-onindicator

• The indicator is illuminated: The notebook is switched on.

• The indicator ﬂashes: The notebook is in sleep mode (Save-to-RAM).

• The indicator is not lit up: The notebook is switched off or the notebook is in Save-to-Disk mode.

Battery charging indicato

The charging state of the ba With AC adapter connected

• The indicator lights up w rechargeable battery is

• The indicator light is orange: The AC adapter is connected and the battery is being charged.

• The indicator is ﬂashi cannot be charged as t charging process is c a permissible tempe

• The indicator is ﬂashing red: A fault has occurred.

• The indicator is no already more than 9

ndicator

or Batterystatusi

BatterysymbolBatteryindicat

Battery indicator

• The indicator lights up white: The rechargeable battery is charged to between

51% and 100 % of its maximum capacity.

• The indicator l

13 % and 50 % of it

• The indicator lights up red: The rechargeable battery is charged to between

0 % and 12 % of its maximum capacity.

•Theindicato

(for four sec

• The indicator is ﬂashing red: A fault has occurred.

• The indica

Drive indi

DriveIndicator

The indica

Working with the notebook

r/AC connection

ttery is shown by the rechargeable battery indicator.

hite: The rechargeable battery is charged or no

inserted.

ng orange: The AC adapter is connected but the battery

he battery is too hot or too cold for charging. The

ontinued as soon as the rechargeable battery has reached

rature again.

t lit up: The battery is not being charged (the battery is

0% charged or the AC adapter is not connected).

ight is orange: The rechargeable battery is charged to between

s maximum capacity.

r is ﬂashing orange: The battery charging level is being checked onds after battery installation).

tor is not lit up: There is no battery installed.

cator

tor is illuminated: The hard disk drive is being accessed.

Wireless

• The indi

indicator

cator is illuminated: The wireless components are switched on.

• Indicator is off: The wireless components are switched off.

F Lock indicator

ator

Indic

FLock

The indicator is illuminated: The key combination The special functions of the Fn keys (see chapter "

has been pressed.

Key combinations", Page 45)can

be executed by pressing the keys directly without also having to press the

key.

Fujitsu 25

Working with the notebook

Display Description

Num Lock indicator

IndicatorNumLock

The indicator is illuminated: The keys have been switched on. You can output the characters indicated on the upper right of the keys.

Caps Lock indicator

IndicatorCapsLock

The indicator is illuminated: The Caps Lock key has been pressed. All the characters you type will appear in upper case. In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed.

Scroll Lock indicator

IndicatorScrollLock

The indicator is illumin The effect that this key

Battery replacement i

If the battery is unlo will show whether th

battery", Page 50). Yo

the device off ﬁrst. the battery is unlo automatically be a

• The indicator lig Replace the battery.

• The indicator i but the battery

Replace the battery quickly. Caution:Ifth

off. Any data n

• The indicator light is orange: The device is not yet ready for battery replacement as Sleep Mode has not yet been activated.

Wait until th There is a possibility of not shifting to sleep mode even if the battery lock is

released when the system is at high load. Caution:I

data not s

• The indicator lights up red: The device is not ready for battery replacement. Lock the b

attery.

bridge b After a short charging time, the battery replacement can be attempted again.

n: If the battery is replaced now, the device may switch itself off. Any

Cautio

t saved may be lost.

data no

• The indicator is ﬂashing red: Error in the bridge battery.

own the device.

Shut d Connect the device to the AC adapter.

e status indicator ﬂashes red again, contact the Service Desk.

If th

Num

key has been pressed. The virtual number

ated: The key combination

Fn+Rol

has been pressed.

has varies between applications.

ndicator

cked for battery replacement, the battery replacement indicator

e device is ready for battery replacement (see "

Removing a

u can replace the device’s battery without having to switch

The device has a built-in bridge battery for this purpose. If

cked while the device is in operating mode, Sleep Mode will

ctivated.

ht is green: The device is ready for battery replacement.

s ﬂashing orange: The device is ready for battery replacement

charging level of the bridge battery is low.

e battery replacement takes too long, the device may switch itself

ot saved may be lost.

e indicator lights up green.

f the battery is replaced now, the device may switch itself off. Any aved may be lost.

attery again. Connect the device to the AC adapter to charge the

26 Fujitsu

Opening the notebook

► Open the LCD screen.

Working with the notebook

CAUTION:

Do not pick up or hold the computer by the LCD screen. This can damage the LCD screen due to excessive ﬂex. Always lift or carry your computer by holding the keyboard base with both hands.

Fujitsu 27

Working with the notebook

Switching the notebook on

Notebook:switchingonPower-onindicator

► Slide the ON/OFF switch (1) to the right to switch on the notebook.

The ON/OFF switch (1) returns automatically to its original position.



The power-on indicator next to the ON/OFF switch (1) is lit as long as the system is switched on.

Program

You can program the ON/OFF switch:

Operating system Menu

Windows® 10 Pro, Home and S

28 Fujitsu

ming the ON/OFF switch

Windows 10 Start - Control Panel - (Browse Control Panel - ) Power Options - Choose what the power buttons do

If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "

Security functions", Page 62.

Working with the notebook

Different ways to use your notebook

The different working modes allow you to use your device in a number of different usage scenarios.

Laptop Mode

OS Mode Desktop Tablet

Windows 10

Pro

Windows 10 S

Auto rotation

Keyboard /

Touchpad OS Mode Desktop Desktop Tablet

Auto rotation

Keyboard Touchpad

OFF ON

ON OFF

OFF OFF ON

From notebook to Tablet PC

Stand Mode

OFF

Tent Mode Tablet Mode

ON OFF

► Raise the LCD screen into a vertical position.

Fujitsu 29

Working with the notebook

You can fold back the LCD screen inﬁnitely variable in an angle between 0 and 360 degrees,

► Fold the screen down completely until the back of the screen is positioned

against the bottom of the device.

The screen is touchpad bu

Select display orientation (portrait or landscape format)

eformat

format

rientation Landscap

Portrait

Displayo

You can choose to use either portrait or landscape for the display, or whether the screen

now in the tablet position. The keyboard, the touchpad and the

ttons are switched off in this position.

orientation should automatically adjust to the orientation of the tablet PC.

You can change these settings under Control Panel - Hardware and Sound

- Windows Mobility Center / Rotate screen.

In the settings there are proﬁles saved for operation with different screen orientations. These proﬁles have preset standard conﬁgurations that can be modiﬁed as desired.

These settings do not just affect the screen settings on the Tablet PC, but also on external monitors that are connected.

30 Fujitsu

From Tablet PC to notebook

► Raise the LCD screen into a vertical position. ► Fold the monitor down until the desired position is reached.

Working with the notebook

Fujitsu 31

Working with the notebook

Switching off the notebook

Notebook

► Close all applications and then shut down your operating system (please

refer to the "Operating system manual").

32 Fujitsu

Closing the notebook

Working with the notebook

► Fold the LCD screen onto the lower section of the notebook.

Handwriting recognition

iled information on handwriting recognition, see the documentation for your operating system.

For deta

ent, handwriting recognition on Windows supports the following languages:

At pres

h, German, French, Italian, Japanese, Korean, Chinese (traditional and simpliﬁed), Dutch,

Englis

guese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,

Portu

h, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.

Polis

ndows you can set the required language under Control Panel – Time,

On Wi

uage and Region – Language.

Lang

Fujitsu 33

Working with the notebook

LCD screen

LCDscreenNotes

Background lighting

LCD screens are operated with background lighting. The luminosity of the background lighting can decrease during the period of use of the notebook. However, youcan set the brightness of your monitor individually.

Synchronizing the display on the LCD screen and an external monitor

For more information, please refer to Chapter " "Switching between display outputs".

Hot keys", Page 43 under

Using the device as a Tablet PC

You can execute commands as follows:

• using the stylus (supplied with your device).

• using your ﬁnger

Using your ﬁngers

You can execute certain commands by using your ﬁnger tip on the touchscreen of your device.

Alternatively, everything which you can select or activate using your ﬁnger tip can also be selected or activated using the stylus.

Calibrating the Dual Digitizer for ﬁnger-based operation of the device

Please see chapter "Calibrating the stylus", Page 37 for instructions on how to calibrate your device to use Dual Digitizer Technology.

Please note: There are separate calibration programs available for calibrating the stylus and for calibrating ﬁnger-based operation. Do not use the calibration tool for the stylus to calibrate ﬁnger-based operation.

34 Fujitsu

Using the stylus

Pen

Working with the notebook

1 = stylus tip

2 = stylus button (= eraser) 3 = stylus button (= right mouse button) 4 = charging contacts 5 = eyelet for optional stylus tether

Software will need to be downloaded which includes an overview on the stylus: "

http://www.fujitsu.com/us/support/"

You can use the stylus on your Tablet PC as an electronic writing tool, to select menu items and to navigate through the programs. Programs that support handwriting recognitionalsoallowyouto write directly on the screen with the stylus. You can also use the stylus as a drawing tool.

A stylus tether is available as an optional extra and you can use this to tie the eyelet on the stylus to the eyelet on the Tablet PC.

Use only the stylus that was provided with your Tablet PC. Do not use any other pointed object as a substitute, that was not specially designed for your Tablet PC. Replace the stylus tip if it is worn. The warranty does not cover a scratched screen.

While writing, take care that you do not scratch the surface of the display (e.g. with a wristwatch or bracelet).

To prevent the stylus from jamming in its slot, always make sure that you insert the stylus correctly into its slot (the charging contacts on the stylus point towards the rear of the Tablet PC).

Fujitsu 35

Working with the notebook

The stylus of the Tablet PC is an electronic instrument that can be damaged if used improperly. Handle the stylus with care.

Our recommendations for proper handling of the stylus are as follows:

• Do not gesture with the stylus.

• Do not use the stylus as a pointer.

• Do not use the stylus on surfaces other than the screen of the Tablet PC.

• Do not try to turn the grip of the stylus. The grip is used to put the stylus into its slot or to take it out of its slot.

• Never store the stylus with its weight on the tip (e.g. with the tip pointingdownina pen container). If the stylus is stored with the tip pointing down, this may have an adverse effect on the stylus mechanism (particularly under high temperatures). In this case the stylus tip may react as though it is constantly being pressed down. To avoid damage, the stylus should be stored in the slot when not in use.

The stylus can be inﬂuenced by electromagnetic ﬁelds (cursor quivers or jumps). There may be a few areas on the screen where the cursor quivers slightly in spite of pressing the stylus down ﬁrmly.

The screen responds to entries made with the tip of the ﬁnger or the stylus when the tip of the ﬁnger or the stylus directly touches the screen.

You can use the stylus to perform almost all functions for which you would otherwiseuseamouse.

Action Mouse

Selecting menu items

Starting programs Double-click with the left mouse

Moving an object or window

Opening a context menu

Moving the cursor Move the mouse

Click with the left mouse button. Tap on the menu entry with the tip of

button. Drag with the left mouse button

pressed.

Click with the right mouse button.

Stylus

the stylus. Tap on the program symbol twice in

rapid succession using the stylus tip. Place the stylus tip directly on the

object or window. Keep the stylus tip held against the screen. Drag the desired object or window.

Tap on the desired element with the stylus and keep the stylus pressed against the screen.

Place the tip of the stylus directly on the screen.

Energy

To save energy, the stylus automatically switches off after 10 minutes of inactivity and switches to power saving mode.

The stylus automatically returns to normal operating mode when the stylus tip is touched again.

36 Fujitsu

saving functions of the stylus

Working with the notebook

Charging the stylus battery

The stylus contains a built-in battery, which is automatically charged when the stylus is fully inserted in its slot. The stylus is also charged when the notebook is in power saving mode or is switched off. A charging time of approximately 15 seconds is sufﬁcient to able to stylus to be used for 90 minutes.

► Insert the stylus fully into the slot.

After a charging period of approximately 5



minutes, the stylus battery is fully charged.

Adjusting the stylus

Operating system Menu

Windows® 10 Pro, Home and S

Under System Control - Hardware and Sound - Pen and Touch you can make various settings for the stylus.

Calibrating the stylus

Before ﬁrst use with the stylus, you must calibrate your Tablet PC via the operating system, so that it recognizes the stylus as accurately as possible.

You should also always repeat the calibration if the co-ordination betweenthe stylus and the cursor movement deteriorates.

Operating system Menu

Windows® 10 Pro, Home and S

To calibrate, run the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats.

Fujitsu 37

Working with the notebook

Securing a stylus tether

You can secure the stylus with a stylus tether to prevent accidentally dropping it or losing it.

► Secure the end of the stylus tether with the smaller loop to your stylus. ► Secure the end of the stylus tether with the larger loop to your notebook.

38 Fujitsu

Working with the notebook

Using the device as a notebook

Touchpad and touchpad buttons

Keep the touchpad clean. Protect it from dirt, liquids and grease.

TouchpadTouchpad

Do not use the touchpad if your ﬁngers are dirty. Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.

1 = Touchpad

The touchpad enables you to move the mouse pointer on the monitor. The touchpad buttons allow you to select and execute commands. They correspond

to the buttons on a conventional mouse.

2 = Touchpad buttons

You can also deactivate the touchpad via a key, so that you cannot move the pointer on the monitor unintentionally (see chapter "

Hot keys", Page 43).

Moving the pointer

► Move your ﬁnger on the touchpad.

Touchpad

The pointer will move.



Selecting an item

► Move the pointer to the item you wish to select.

Touchpa

► Tap the touchpad once or press the left button once.

The item is selected.



Executing commands

► Move the pointer to the ﬁeld you wish to select.

Touchpad

► Tap the touchpad twice or press the left button twice.

The command is executed.



Fujitsu 39

Working with the notebook

Dragging items

► Select the desired item.

Touchpad

► Press and hold the left button and drag the item to the desired position

with the ﬁnger on the touchpad. The item will be moved.



Switching the Touchpad on and off

You can switch the Touchpad on and off using a key, see "Hot keys", Page 43.

Keyboard

KeyboardNumerickeypadNumberkeypadkeys

The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations.

The following description of the keys applies to the Windows operating system. Additional functions supported by the keys are described in the relevant manuals supplied with your application programs.

The following illustration shows how to access the different characters onkeyswithoverlaid functions. The example applies when the Caps Lock key has not been activated.

The keyboard of your notebook is subject to continuous wear through normal use. The key markings are especially prone to wear. The key markings are liable to wear away over the life of the notebook.

The illustration may differ from your device. Depending on the region you live in, your notebook is delivered with a monolingual

keyboard layout (USA) or a bilingual keyboard layout (Canada).

40 Fujitsu

Key Description

Backspace key

Backspace

The

BackspacekeyBackspace

Tab key

Tab

The

Tabkey

key moves the cursor to the next tab stop.

Enter key (return)

Enter

The is executed when you press this key.

EnterkeyReturnEnterLinefeed

Caps Lock key

Caps Lock/Caps Lock Fix Maj

The the corresponding icon is displayed in the Windows information area. In

Bilingual keyboard:

Caps Lock mode, all of the characters you type appear in upper case. In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. To cancel the Caps Lock function, simply press the Caps Lock key again.

CapsLockkeyCap sLock

Shift key

Shift

The overlay keys, the character printed on the upper left of the key will appear when that key is pressed.

ShiftkeyShift

Fn key

The

Fnkey

key enables the special functions indicated on overlay keys.

Working with the notebook

key deletes the character to the left of the cursor.

key terminates a command line. The command you have entered

key activates the Caps Lock mode, and

key causes uppercase characters to appear. In the case of

Windows key

Windows

The application.

Windowskey

key switches between the start screen and the last used

Alt key

Alt

The with other

ivates special functions when it is pressed in combination

key act

keys.

Context Menu key

The

Context Menu

key opens the menu for the active application.

Bilingual keyboard:

Ctrl key

Ctrl

The

key activates special functions when it is pressed in combination

with other keys.

Fujitsu 41

Working with the notebook

Key Description

Cursor keys

The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right.

CursorkeysCursorcontrol

Home key

Home/Home/Debut

The page, cell or screen of where the cursor is positioned.

Bilingual keyboard:

End key

End/End/Fin

The screen of where the c

Bilingual keyboard:

key jumps to the beginning of the line, document

key jumps to the en

d of the line, document page, cell or

ursor is positioned.

Bilingual key

board:

Bilingual keyboard:

Insert key

When pressing the

Insert/Insert/Insér

key, you change between two input

modes:

1. Typeover mode: When typing, you overwrite the character at the current cursor position.

2. Insert mode: While typing, another character at the current cursor position is inserted. All characters right of the cursor will be shifted by one position.

Delete key

When pressing the

Delete/Delete/Suppr

key, the character before the / on

the right of the cursor will be deleted.

42 Fujitsu

Working with the notebook

Hot keys and function keys

The top row of your notebook’s keyboard has both hot key and function key icons:

3 4

1 = Top row of a monolingual keyboard layout 2 = Top row of a bilingual keyboard layout

3=Hotkey 4 = Function key

Hot keys

Hot keys are the icons on the top of the keys. The hot keys activate features on your device (e. g. loudpeakers on/off, microphone enable/disable,

volume increase/decrease, brightness increase/decrease). Hot keys are convenience features. Hot keys are always the primary key functionality at Windows startup (see

chapter "

Hot key Description

F Lock settings", Page 45).

Enable/Disable the microphone*

This hot key enables and disables the microphone.

MicrophoneMicrophone

h the speakers on and off

Switc

ot key switches your notebook’s speakers off or on.

This h

SpeakerSpeaker

ease the volume

Decr

s hot key reduces the volume of the internal speakers.

Thi

Volume

crease volume

is hot key increases the volume of the internal speakers.

Volume

Switch the wireless components on/off*

This hot key switches the wireless components off or on.

lesscomponents

lesscomponents Wire

Wire

Switch the touchpad and touchpad buttons on/off*

This hot keyswitches the touchpad and the touchpad buttons on or off.

TouchpadTouchpadbuttonsTouchpad

Fujitsu 43

Working with the notebook

Hot key Description

Decrease the brightness of the screen

This hot key decreases the brightness of the screen.

LCDscreenBrightnessofthescreen

Increase the brightness of th

This hot key increases the bri

Brightnessofthescreen

Activate energy saving functions*

This hot key activates the Function Manager.

Energysavingfunctions

Switch between display outputs*

Use this hot key to select which screen(s) is/are used for display if an external monitor is connected.

Screen output is possible:

• only on the notebook’s LCD screen

• on the LCD screen of the notebook and the external monitor at the same time

• only on the external monitor This setting is useful if you would like a high resolution and a high

refresh rate on an external monitor.

Fn+F10Switchbetweendisplayoutputs

Create a scrensho

With this hot key stored in the cl

Bilingual keyb

oard:

e screen

ghtness of the screen.

, a screenshot of the current screen image is created and

ipboard.

Enable/Disable virtual number keys

This hot key enables and disables the virtual number keys. Those characters

Bilingual keyboard:

are issued, which are located at the top right corner of the respective keys.

* These functions do not work while the computer is at a high load.

Function keys

The function keys are the icons on the bottom of the keys. The function keys are numbered from

The function keys serve as short-cut key functions and activate operating system and/or software functions.

Regardless of the F Lock setting, the function keys are always the primary key functionality:

• until Windows is loaded (after rebooting the system). Then the primary keys functionality are maintained from the last F Lock setting

prior to reboot (see chapter "

F Lock settings", Page 45).

• when accessing BIOS during POST: If the BIOS menu is not started. You must press the

44 Fujitsu

F12

up to

Fn+F2orFn+F12

F2orF12

are pressed during boot,

key alone.

Working with the notebook

F Lock settings

By pressing the primary or secondary key functionality for the top row of keys.

F Lock is set to off by default. ►Press

If F Lock is set on, it stays on like the



When switching the F Lock settings, the primary or secondary key functionality changes as follows:

Status

FLockisoff(FLockindicatoris not illuminated)

F Lock is on (F Lock indicator is illuminated)

Key combinations

Keycombinations

The following des following key co

Other key combi with your appli

Key combinati ►Presstheﬁrst

► While holding the ﬁrst key down, press the other key or keys in the combination.

Combination Description

F Lock

key, you may lock either the hot keys or function keys as the

Fn+Esc

to switch F Lock on or off.

Caps Lock

key.

Hot key Function key

Hot keys become the primary keys:

► Press the hot key alone. Hot keys become the secondary

keys:

►Press

+ hot key.

Function keys become the secondary keys:

►Press

+ function key.

Function keys become the primary keys:

► Press the function key

alone.

cription of key combinations applies to Windows operating systems. Some ofthe

mbinations may not function in other operating systems or with certain device drivers.

nations are described in the relevant manuals supplied

cation programs.

ons are entered as follows:

key in the key combination and keep it pressed.

Switch F Lock setting on/off

This key combination switches the F Lock setting on/off (see chapter "

F Lock settings", Page 45).

Switch between open applications

This key combination switches between several open applications.

Alt+Tab

Bilingual keyboard:

Fujitsu 45

Working with the notebook

Combination Description

Open Windows Security/Task Man

This key combination opens the W Security/Task Manager window

Ctrl+Alt+Del

Bilingual keyboard:

Back tab

Shift

This key combination moves the cursor back to the previous tab stop.

Shift+TabBacktab

Enable/Disable Scroll Lock

This key combination activates special functions, which differ from application to application.

Fn+ScrollLock

Bilingual keyboard:

Toggle backlit keyboard settings

This key combination toggles the backlit keyboard settings between low, high and off (conﬁguration-dependent).

Shift+TabBacktab

ager window

indows

Key combinat for your oper

In addition

•

ions using the Windows keys are detailed in the manual

ating system.

, the following non-labeled key combinations are supported:

= Pause

= Break

= SysRq

46 Fujitsu

Working with the notebook

Virtual number keys

NumerickeypadVirtualnumberke ysNumLock

Virtual number keys are provided so that the keys of a number keypad can be used for certain applications. The virtual number keys are recognizable on the keyboard by the numbers and symbols printed in the upper right corner of each key. If you have switched on the virtual number keys, you can output the characters shown on the upper right of the keys.

The key assignment shown below may be different from the keyboard layout of your device.

1 = Character valid when the

keyboard:

Num Lk/Num

;

Num Lk

)keyisnotactive

(bilingual

2 = Character valid when the

keyboard:

Num Lk/Num

Further information about the status indicators can be found in chapter "

Status indicators", Page 24.

Num Lk

)keyisactive

(bilingual

Country and keyboard settings

► Make the country and keyboard settings as described in the documentation for your operating

system.

Fujitsu 47

Working with the notebook

Webcam

Depending on the software used, you can use your webcam to take pictures, record video clips or take part in web chats.

• The picture quality depends on the lighting conditions and the software being used.

• You can only operate the webcam with a particular application (e.g. an Internet telephony program or a video conferencing program which supports a webcam).

• When using the webcam, the notebook base must not wobble.

• The webcam automatically adjusts itself to the current light level. For this reason the LCD display may ﬂicker while the light level is adjusted.

Further information on use of the webcam and additional settings for your webcam can be found in the help function of the program using the webcam.

48 Fujitsu

Working with the notebook

Rechargeable battery

BatteryBatteryServicelife,batteryRechargeablebatteryBattery

During mobile use, the notebook runs on its built-in battery. You can increase the service life of the battery by caring for the battery properly. The average battery service life is around 800 charge/discharge cycles.

You can extend the battery service life by taking advantage of the available energy saving functions.

Charging, caring for and maintaining the battery

BatteryBattery

The notebook battery can only be charged if the ambient temperature is between 5°C / 41°F and a maximum of 35°C / 95°F.

You can charge the battery by connecting the notebook to the AC adapter

Connecting the AC adapter", Page 21).

(see " Be aware that the battery will not charge when the battery charge level is between

90% and 100%. If the battery charge level is less than 90% and the AC adapter is connected, the battery charges up to 100%.

If the battery is running low, an alert is triggered. If you do not connect the AC adapter within ﬁve minutes after the alert tone, your notebook will automatically switch off.

Monitoring the battery state of charge

Batterybatterychargemeter

Windows also has a "Battery charge meter" in the taskbar for monitoring the battery capacity. When you place the mouse pointer on the battery symbol, the system displays the state of charge of the battery.

Battery storage

rge,battery

ity,battery BatteryBatterySelf-discha

Chargecapac

The battery should be stored in a dry environment at a temperature between 0°C / 32°F and 30°C / 86°F. The lower the storage temperature, the lower the rate of self-discharge.

If you will be storing a battery for a longer period (more than two months), the battery charge level should be approx. 30%. To prevent exhaustive discharge which would permanently damage the battery, check the level of charge of the battery at regular intervals.

To be able to make use of the optimum capacity of the battery, you should allow the battery to fully discharge and then recharge it.

If you do not intend to use a battery for long periods of time, remove it from the notebook. Never store batteries in the unit!

Fujitsu 49

Working with the notebook

Removing and installing the battery

Only use batteries approved by Fujitsu for your notebook. Never use force when ﬁtting or removing a battery. Make sure that no foreign bodies get into the battery connections. Never store a battery for long periods in the discharged state. This

can make it impossible to recharge.

Removing a battery

Please observe the safet Remove the power plug fr

y information in chapter "

om the power outlet!

Important notes", Page 14.

► If the notebook is connected to a USB Type-C

(USB Type-C

► Close the LCD screen. ► Remove all the c ► Turn the device over and place it on a stable, ﬂat and clean surface. If necessary, lay an

anti-slip cloth on this surface to prevent the device from being scratched.

) to disconnect the connection.

You can replace the device’s battery without having to switch the device off ﬁrst. The device has a built-in bridge battery for this purpose. If the battery is unlocked while the device is in operating mode, Sleep Mode will automatically be activated. Before removing the battery, please check the battery replacement status indicator (see "

ables from the device.

Status indicators", Page 24).

dock, release the USB cable

► Slide the Battery Lock slider switch in the direction of the arrow (1) and holditinplace.

50 Fujitsu

Working with the notebook

► Slide the Battery Lock slider switch in direction of the arrow (2).

As soon as the battery is unlocked, the battery replacement status indicator (3) lights up and



shows whether the device is ready for battery replacement (see "

The status indicator only lights up if the device is switched on during battery replacement.

If the device is not ready for battery replacement and the battery is replaced nonetheless, the device will switch itself off. Any data not saved may be lost.

Status indicators", Page 24).

► Remove the battery from the battery compartment (4).

Fujitsu 51

Working with the notebook

Installing a battery

► Insert the battery in the battery compartment (1). ► Slide the battery lock slider switch in the direction of the arrow (2).

The battery is secured. The battery replacement status indicator (3) goes out.



► Turn the notebook the right way up again and place it on a ﬂat surface. ► Reconnect the cables that were previously disconnected.

52 Fujitsu

Working with the notebook

Using the energy saving functions

EnergyEnergyBattery

The notebook uses less power when the available energy-saving functions are used. You will then be able to work longer when using the battery before having to recharge it.

ECO

The environmentally friendly attributes.

When you fold down and close the LCD screen, depending on the setting in Windows, the notebook automatically enters a power saving mode.

The recommended settings for the Windows energy saving functions are predeﬁned as "Fujitsu Computer EcoSettings" in the Power Options of the Control Panel and can be displayed there.

► Set the energy saving functions in your Control Panel.

key activates the Function Manager which maximizes your LIFEBOOK’s

The energy efﬁciency is increased and environmental pollution is reduced. By choosing the best power options, you can make signiﬁcant savings and at the same time help protect the environment.

If you need further information about an option, you can get help with most

settings by pressing

When the noteboo

During energy s in a swap ﬁle on t

Never switch t is nearly ﬂat,

k is in energy saving mode, the following must be remembered:

aving mode, open data is held in main memory or

he notebook off while it is in an energy saving mode. If the built-in battery

close all open ﬁles and do not go into energy saving mode.

to open the Microsoft Help.

he hard disk.

If you do not intend to use your notebook for a long period of time:

► Exit energy saving mode if necessary by moving the mouse, making an entry at the keyboard

or by switching on the notebook.

► Close all opened programs and completely shut down the notebook.

Fujitsu 53

Working with the notebook

Memory cards

Slot

Your notebook is equipped with an integrated memory card reader.

Follow the manufacturer’s instructions when handling the memory cards.

Memorycard

Supported formats

Your notebook supports the following formats:

• Secure Digital (SD

•SDHC

•SDXC

Inserting the memory card

Card)

► Gently push the memory card into the slot

until you feel it click into place. The label area must be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged.

Memorycard

Depending on the particular type



used, the memory card may protrude slightly from the slot.

54 Fujitsu

Working with the notebook

Removing the memory card

Memorycard

To avoid any loss of data, always follow the correct procedure for removing the card (see the documentation for your operating system).

► On devices with card locking: Press

on the memory card (1).

Memorycard

The memory card is released and



can now be removed.

► Pull the memory card out of the slot (2).

Speaker and microphone

MicrophoneSpeakerVolumecontro l

You can ﬁnd information about the exact position of speakers and microphones in chapter "

Please refer to chapter " and also enabling/disabling the speakers using keys.

Ports and controls", Page 11.

Hot keys", Page 43 for information on setting the volume

If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. You can ﬁnd information on connecting headphones and a microphone in

chapter "

Connecting external devices", Page 70.

Fujitsu 55

Working with the notebook

Optional wireless LAN / Bluetooth wireless components

The installation of radio components not approved by Fujitsu will invalidate the certiﬁcations issued for this device.

Depending on the system conﬁguration ordered, your system will be equipped with wireless LAN and Bluetooth.

Switching the wireless components on and off

►PressthekeyF5to swit

WirelessLANWirelessLANBluetoothBluetooth

The wireless component indicator will illuminate when one or more wireless



components are switched on.

The Bluetooth module and the wireless LAN transmission unit (antenna) willall be switched off when you switch off the wireless components.

Pay attention to the additional safety notes for devices with wireless components provided in the "Safety/Regulations" manual.

Details on using a wireless LAN can be found in the online help system included in the wireless LAN software.

ch the wireless components on and off.

Conﬁguring WLAN access

• Requirement: A WLAN is available and you have the necessary access data to hand.

Information on conﬁguring WLAN access can be found in the documentation for your operating system.

Further information on WLAN and Bluetooth

For further information about WLAN or Bluetooth, please refer to the appendix of this Operating Manual.

For WLAN speciﬁcations, see chapter "

56 Fujitsu

WLAN speciﬁcations", Page 99.

Working with the notebook

Ethernet and LAN

EthernetLAN

The internal network module of your notebook supports Ethernet LAN. You canuseitto establish a connection to a local network (LAN = Local Area Network).

► Connect the network cable to the LAN

port of the notebook (1).

► Connect the network cable to your

network connection (2).

Your network administrator can help you to conﬁgure and use the LAN connections. The network cable is not included in the delivery scope. This type of

cable can be obtained from a specialist dealer.

Fujitsu 57

Working with the notebook

Your USB Type-C dock (optional)

Your dock is a device that helps you to quickly connect your notebook to your peripheral devices, such as a monitor, printer, etc.

The features offered by the dock include standard ports for monitor, audio and other USB devices, such as mouse and keyboard.

You need only connect the notebook to the dock in order to work with your peripheral devices.

Ports on the dock

dockPorts

1 = Combined headphones/microphone port 2 = USB 3.0 port (USB Type-A) 3 = VGA monitor port 4=HDMI 5 = Display Port 6 = LAN port 7 = USB 3.1 Gen 1 port for data connection

only (USB Type-C)

8 = ON/OFF switch with power-on indicator 9 = DC input connector (DC IN) 10 = USB 3.1 Gen 1 port for data connection

and power supply for the notebook (USB Type-C)

58 Fujitsu

Working with the notebook

Setting up the dock

Select a suitable location for the dock before setting it up. In doing so, please follow these instructions:

• Never place the dock on a soft surface (e.g. carpeting, upholstered furniture, bed). This

can block the air vents of the notebook and cause overheating and damage.

• Place the dock on a stable, ﬂat and anti-slip surface. Please note that the

rubber feet may mark certain types of surfaces.

• Never place the dock and the mains adapter on a heat-sensitive surface.

• Do not expose the dock to extreme environmental conditions.

Protect the dock from dust, humidity and heat.

Connecting the AC adapter to the dock

► Connect the AC cable to the AC adapter (1). ► Plug the AC cable into the power outlet (2). ► Connect the AC adapter cable to the DC

jack (DC IN) of the dock (3).

When the notebook is connected to a dock, the operating system creates a hardware proﬁle for the "Docked" mode. In this proﬁle, for example, the monitor which was last used for output is saved as a setting. This proﬁle will be loaded as soon as the notebook is connected to a dock of the same type.

Fujitsu 59

Working with the notebook

Connecting the notebook to the dock

► Disconnect the AC adapter cable from the DC jack (DC IN) of the notebook.

► Connect one end of the USB cable (USB Type-C) to the USB 3.0 port with

charging function (USB Type-C) on the notebook (1).

► Connect th

connectio

60 Fujitsu

e other end of the USB cable (USB Type-C) to the USB 3.0 port for data

n and power supply (USB Type-C) on the dock (2).

Switching on the notebook via the dock

Working with the notebook

►PresstheON/

OFF switch on the dock to switch on the notebook.

Switching off notebook via dock

► Close all applications and then shut down your operating system (please

refer to the manual for the operating system).

If the notebook cannot be shut down properly, press the ON/OFF switch on the dock for approx. four seconds. The notebook will switch off. However, any unsaved data may be lost in the process.

Disconnecting the notebook from the dock

► Disconnect the supplied USB cable (USB Type-C) from the USB 3.0 port

(USB Type-C) on the notebook.

Fujitsu 61

Security functions

Securityfunctions

Your notebook has a variety of security functions that you can use to protect your system and your personal data from unauthorized access.

This chapter explains how to use these functions, and what the beneﬁts are.

Please remember that in some cases, for example, forgetting your password, you may be locked out of the system and unable to access your data. Therefore, please note the following information:

• Make regular backups to external optical disks such as external hard drives, CDs, DVDs or Blu-ray Discs.

• Some security functio of the passwords and ke

If you forget your passwords you will need to contact our Service Desk. Deletion or resetting of passwords are not covered by your warranty and a charge will be made for assistance.

ns need you to choose passwords. Make a note

ep them in a safe place.

62 Fujitsu

Brief overview of the security functions

Detailed information about the security equipment of your system can be found in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD or on our website at "

http://www.fujitsu.com/us/support/".

Security functions

Security function Type of protection

Security Lock

Fingerprint sensor (conﬁguration depende

Palm vein sensor (conﬁguration dependent)

BIOS password protection Password protection for

Boot from Remova

Owner Inform

Smart Card reader (conﬁguration dependent)

Trusted Platform Module (conﬁguration dependent)

ation

nt)

ble Media

Mechanical Fit and lock the Kensingto

Biometric

the BIOS Setup, operating system and hard disk with supervisor and user password. The passwords consist of a maximum of eight alphanumeric characters.

Prevents unauthorized booting of an operating system from external media (e.g. USB stick, USB CD-ROM drive, etc.).

Display service desk or owner information during the boot process.

PIN and SmartCard protection for the operating system

Identiﬁcation and authentication of the notebook

Preparation

Lock Cable (accessory). Install the supplied software.

Install the supplied software.

Specify at least one supervisor password in the BIOS Setup and activate the password protection for the operating system and hard disk as desired.

In the BIOS Setup

Security menu a from Removabl

In the BIOS Se

Security men Owner Infor

To use the SmartCard reader functions, install suitable software.

Deﬁne a supervisor password in the BIOS Setup and enable the TPM (Security Chip).

nd edit the Boot

eMediaoption.

tup, go to the

u and edit the

mation option.

,gotothe

Fujitsu 63

Security functions

Conﬁguring the ﬁngerprint sensor (conﬁguration dependent)

FingerprintsensorFi ngerprintsensor

The ﬁngerprint sensor can record the image of a ﬁngerprint. With additional ﬁngerprint software, this image can be processed and used instead of a password.

► Install the ﬁngerprint software to be able to use the ﬁngerprint sensor (1).

64 Fujitsu

Security functions

Conﬁguring the palm vein sensor (conﬁguration dependent)

PalmveinsensorPalmveinsensor

The palm vein sensor can record the image of the veins on the palm of your hand. This image is evaluated with additional software and can be used in place of a password.

► Install the software to use the palm

vein sensor (1).

You can obtain further information on the palm vein sensor in the "appendix: Miscellaneous Information".

The palm vein sensor is not supported on Windows® 10 S conﬁgurations.

Using the Security Lock

Your device come can use the Kens from theft. The

s with a Security Lock mechanism for the Kensington Lock Cable. You

ington Lock Cable, a sturdy steel cable, to help protect your notebook

Kensington Lock Cable is available as an accessory.

Fujitsu recom

Fujitsu 65

mends the use of a combination lock.

► Fit the Kensington Lock Cable to the

mechanism on your notebook.

KensingtonLockCableUsingthesecuritylockMechanicalsecurityAnti-theftprotection

Security functions

Conﬁguring password protection in BIOS Setup Utility

Before using the various options for password protection in the BIOS Setup Utility, please proceed as follows to increase data security:

Make a note of the passwords and keep them in a safe place. If you forget your supervisor password you will not be able to access your notebook. Passwordsare not covered by your warranty and a charge will be made for assistance.

Passwordprotection

Your password can be up to special characters. A di

When using special char the country-speciﬁc va

Protecting BIOS Setup Utility (supervisor password and user password)

If you have opened these operating instructions on the screen, we recommend that you print them out. You cannot call up the instructions on the screen while you are setting up the password.

BIOSSetupUtility

The supervisor password and the user password both prevent unauthorized use of the BIOS

Setup Utility. The supervisor password allows you to access all of the functions of the BIOS Setup Utility, while the user password will only give you access to some of the functions. You can

only set up a user password if a supervisor password has already been assigned.

32 characters long and can contain letters, numbers and

stinction is made between upper and lower case.

acters, please note that these are dependent on

riant of the keyboard used.

Calling and using the BIOS Setup Utility is described in the chapter

Settings in BIOS Setup Utility", Page 86.

Assigning the supervisor and user passwords

► Start the BIOS Setup Utility and go to the Security menu. ► Select the Set Supervisor Password ﬁeld and press the Enter key.

With Enter new Password: you are asked to enter a password.



► Enter the password and press the Enter key.

Conﬁrm new Password requires you to conﬁrm the password.



► Enter the password again and press the Enter key.

Changes have been saved is displayed as a conﬁrmation that the new password has been saved.



► To set the user password, select Set User Password and proceed exactly as

when conﬁguring the supervisor password. If you do not want to change any other settings, you can exit BIOS Setup Utility.



►IntheExit menu, select the option Save Changes & Exit. ► Select Yes and press the Enter key.

word

rvisorpassword

password Pass

Supe

User

The notebook is then rebooted and the new password comes into effect. It will now be necessary



to ﬁrst enter your supervisor or user password in order to open the BIOS Setup Utility.Please note that the user password only provides access to a few of the BIOS settings.

66 Fujitsu

Security functions

Changing the supervisor password or user password

You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password.

PasswordSupervisorpasswordUserpassword

► Start the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as when assigning a password.

Removing passwords

To remove a password (without setting a new password) perform the following steps:

PasswordSupervisorpasswordUserpassword

► Start the BIOS Setup Utility and go to the Security menu. ► Highlight the Set Supervisor Password or Set User Password ﬁeld and press the Enter key.

You will be requested to enter the current password by the Enter Current Password prompt.



Enter New Password will appear and you will be requested to enter a new password.

► Press the Enter key twice at this request. ►IntheExit menu, select the option Save Changes & Exit. ► Select Yes and press the Enter key.

The notebook will now reboot with the password removed.



With the supervisor password, you simultaneously deactivate the user password.

Password protection for booting the operating system

With the superv section " also prevent b

Operatingsystem

isor password you have set in the BIOS Setup Utility (see

ning the supervisor and user passwords", Page 66), you can

Assig

ooting of the operating system.

Activating system protection

► Start the BIOS Setup Utility and go to the Security menu.

Operatingsystem

► Select the PasswordonBootoption and press the Enter key. ► Select the option you require (Disabled, First Boot or Every Boot) and press the enter key ► Select the Save Changes & Exit option under Exit.

The notebook will reboot. You will be prompted to enter your password (the supervisor password).



Deactivating system protection

► Start the BIOS Setup Utility and go to the Security menu.

Operatingsystem

► Select the PasswordonBootoption and press the Enter key. ► Select the Disabled option and press the Enter key.

If you do not want to change any other settings, you can exit BIOS Setup Utility.



► Select the Save Changes & Exit option under Exit.

The notebook will reboot. The system is no longer password-protected.



Fujitsu 67

Security functions

Password protection for the hard disk

If a supervisor password was set, an additional password for the hard disk can be set in the Hard Disk Security menu.

The hard disk is protected by this password. Data on this hard disk can then only be read in another system if the correct password is entered.

Smart Card reader (conﬁguration-dependent)

SecurityfunctionsSecurityfunctions

Smart Cards are not supplied as standard equipment. You can use all Smart Cards that comply with the ISO standard 7816-1, -2 or -3. These Smart Cards are available from various manufacturers.

With the appropriate software you can use your Smart Card as an alternative to password protection, but also as a digital signature, for encrypting your e-mails or for home banking.

We recommend that you always use two Smart Cards. Always keep one of the Smart Cards inasafeplaceifyouarecarryingtheotherSmartCardwithyou.

Inserting the Smar

Do not use force when inserting and removing the Smart Card. Make sure that foreign objects do not fall into the Smart Card reader.

tCard

► Slide the Smart Card into the Smart

Card reader with the chip facing upwards and to the front.

68 Fujitsu

Security functions

Trusted Platform Module - TPM

TPMTrustedPlatformModule

To u s e th e TP M , you must enable the TPM in the BIOS-Setup before the software is installed. The requirement for this is that you have assigned at least the supervisor password (see "

Enabling TPM

• Requirement: You have assigned a supervisor password (see "Security functions", Page 62). ► Call BIOS Setup and sele ► Mark the TPM Security Chip Setting ﬁeld and press the Enter key. ► Select the entry Enabl

Once you have enabled the TPM the Clear Security Chip menu item appears.



You can clear the hold all secret keys (e.g etc.) generated by

Take note that you c encrypted on the h

►FromtheExit menu ► Press the Enter key and select Yes.

The notebook res



Disabling TPM

• Requirement: You have assigned a supervisor password (see "Security functions", Page 62). ► Call BIOS Setup and select the Security menu. ► Mark the TPM Security Chip Setting ﬁeld and press the Enter key. ► Select the entry Disabled to disable the TPM. ►IntheExit menu, select the option Exit Saving Changes. ► Press the Enter key and select Yes.

The notebook will now reboot with TPM deactivated.



Security functions", Page 62).

ct the Security menu.

ed to enable the TPM

er in the TPM using Clear Security Chip.WithEnabled,

. SRK - Storage Root Keys, AIK - Attestation Identity Keys

applications are deleted.

an then no longer access the data you have

older-based keys!

, select the option Exit Saving Changes.

tarts and the TPM is switched on after the reboot.

Fujitsu 69

Connecting external devices

Under all circumstances, please observe the safety notes provided in the

Important notes", Page 14 chapter before connecting or disconnecting

any devices to or from your notebook. Always read the documentation supplied with the device you wish to connect. Never connect or disconnect cables during a thunderstorm. Never pull at a cable when disconnecting it. Always grasp the plug.

With some devices such as USB devices, it is not necessary to switch off the notebook and the device before connecting/disconnecting. For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device.

Some of the external devices require special drivers (see the operating system and external device documentation).

HDMI port

HDMIport

The HDMI port on your notebook or the optional dock can be used to connect an external ampliﬁer, LCD TV or a plasma TV with an HDMI connection.

► Connect the data cable to the

external device.

► Connect the da

the notebook

ta cable to the HDMI port on

or on the optional dock.

70 Fujitsu

Connecting external devices

Connecting an external monitor

An analogue monitor is connected to the analogue external monitor port (VGA), a digital monitor to the Display Port on the optional dock. Display output is limited to a maximum of two monitors at any one time (see "

MonitorVGAsocketMonitorp ortMonitorport

Hot keys", Page 43, section "Toggle display output").

Analog external monitor port (VGA) (on

Digital Display Port (on the optional dock)

notebook or on optional dock)

► Switchoffthenot

ebook and the external monitor. ► Plug the data cable of the external monitor into the monitor port. ► First switch on

the external monitor and then the notebook.

You can also swi screen of the n

You can displa notebook LCD s

tch back and forth between the external monitor and the LCD

otebook, see chapter "

y the same picture on the external monitor and the

creen simultaneously.

Hot keys", Page 43.

Fujitsu 71

Connecting external devices

Connecting USB devices

USBports

On the USB ports you can connect external devices that also have a USB port (e.g. a DVD drive, a printer, a scanner or a modem).

USB devices are hot-pluggable. This means you can connect and disconnect the cables of USB devices while the operating system is running.

USB 1.x has a maximum data transfer rate of 12 Mbps. USB 2.0 has a data transfer rate of up to 480 Mbps. USB 3.0 has a data transfer rate of up to 5 Gbps. USB 3.1 Gen 1 has a data transfer rate of up to 5 Gbps. USB 3.1 Gen 2 has a data transfer rate of up to 10 Gbps. Additional information can be found in the documentation for the USB devices.

Device drive

USB devices w

► Connect the data ca

bletothe

external device.

► Connect the data cable to a USB

port of the notebook.

ill be automatically recognized and installed by your operating system.

72 Fujitsu

Connecting external devices

USB port with charging function (USB Type-C)

USBportwithchargingfunction(USBType-C)

At this USB port, you can charge a connected USB device or operate devices without an additional power supply (see "

Connecting the notebook to the dock", Page 60).

You can also charge a connected USB device or operate devices without an additional power supply. This is also possible with the notebook switched off, if the USB Type-C Power Delivery

on System-Off function is activated in the Ad vanced - Miscellaneous Conﬁgurations menu of the BIOS Setup Utility. Calling up and using the BIOS Setup Utility is described in section "

Settings in BIOS Setup Utility", Page 86.

USB devices are hot-pluggable. This means you can connect and disconnect the cables of USB devices while the operating system is running.

Additional information can be found in the documentation for the USB devices.

► Connect the data cable to the

external device.

► Connect the data cable to a USB port

(USB Type-C) on the notebook.

Fujitsu 73

Connecting external devices

USB port with charging function (Anytime USB charge)

You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDA or a mobile phone or to connect a USB lamp).

This is possible even when the notebook is switched off, if the Anytime USB Charge function is enabled in the Advanced/Miscellaneous Conﬁgurations menu of the BIOS Setup Utility. If the setting AC is selected, the device will only be charged when the AC adapter is connected.

Calling and using the BIOS-Setup-Utility is described in the section "

in BIOS Setup Utility", Page 86.

USBchargingfunction

It is recommended that the notebook be operated with the AC adapter connected whenever the USB port with charging function is in use, as this function willdrain the battery more quickly if an external USB device is being charged.

The AC adapter must already be connected when the notebook is switched off, as otherwise the USB charging function will be disabled and the connected USB devices will not be charged.

Some USB devices (e.g. mobile telephony) require a driver in order to utilize the USB charging function. In this case the USB charging function will not work whenthe notebook is switched off, as no drivers are active when the notebook is switched off.

► Connect the data cable to the

external device.

► Connect the data cable to a USB port

(Anytime USB charge) of the notebook.

Settings

How to remove USB devices correctly

Always cor to ensure

► With the left mouse button, click on the symbol in the taskbar for safe removal of hardware. ► Select t ► Press the "Enter" key.



74 Fujitsu

he device you wish to shut down and remove.

r the dialog box which tells you that it is now safe to remove the device.

Wait fo

rectly remove the device according to the rules described below,

that none of your data is lost.

Connecting external devices

Headphones/microphone/Line-In/Line-Out/ headset-combi port

ConnectingaudiodevicesAudioconnectionsConnectingheadphones

Using the headphones/microphone/Line-In/Line-Out/headset-combi port, you can connect a headset, headphones, a microphone or external speakers to your notebook.

Windows 10 S conﬁgurations: You can connect a headphone. However, microphone, Line-In and Line-Out are not supported.

► Connect the audio cable

external device.

► Connect the audio cable to the headphone

port of the notebook. The internal speake



If you purchase a cable from a retailer, please note the following information: The headphones/microphone/Line-In/Line-Out/headset-combi port on

your notebook is a "3.5 mm jack socket". If you want to connect headphones or speakers you will need a "3.5 mm jack plug".

to the

rs are disabled.

Fujitsu 75

Removing and installing components

during servicing

Removing and installing compo

nents

during servicing

Only qualiﬁed technicians should repair your notebook. Unauthorized opening or incorrect repair may greatly endanger the user (electric shock, ﬁre risk) and will invalidate your warranty.

Incaseofservice

Components

You may remove and install the components described in this chapter yourself after consulting the Hotline/Service Desk.

If you remove and install components without consulting the Hotline/Service Desk, then the warranty of your notebook will be voided.

Notes on installing and removing boards and components

• Switch off your notebook and remove the AC plug from the power outlet.

• Always remove the battery.

• Take care when you use the locking mechanisms for the battery and any other component.

• Never use sharp objects such as screwdrivers, scissors or knives as a levertoremovecovers.

InstructionsBoardsESD

Boards with electrostatic sensitive devices (ESD) are marked with the label shown.

When handling boards ﬁtted with ESDs, you must always observe the following points:

• You must always discharge static build up (e.g. by touching a grounded object) before working with boards.

• The equipment and tools you use must be free of static charge.

• Remove the AC plug from the power outlet before inserting or removing boards.

• Always hold boards by their edges.

• Never touch connector pins or conductors on the board.

76 Fujitsu

Removing and installing components

during servicing

Preparing to remove components

If you are going to remove or change system components, prepare for the removal as follows:

Please observe the safety information in chapter "Important notes", Page 14. Remove the AC plug from the power outlet!

► Switch the device off.

The device must not be in energy saving mode.

► Close the LCD screen. ► Remove all the cables ► Turn the device over and place it on a stable, ﬂat and clean surface. If necessary, lay an

anti-slip cloth on this surface to prevent the device from being scratched.

► Remove the battery

from the device.

,see"

Removing a battery", Page 50.

Fujitsu 77

Removing and installing components

during servicing

Remove the cover

► Prepare for removal, see "Preparing to remove components", Page 77.

► Remove the screw (1).

Keep the screw in a safe place.

► Lift the cover off the notebook (2).

78 Fujitsu

Removing and installing components

during servicing

Removing and installing memory

MemorymoduleMainmemoryMemoryremovalSystemexpansionSystemexpansion

If you are asked by the Hotline/Service Desk to remove or install a memory expansion module yourself, proceed as follows:

Please observe the safety information in chapter "Important notes", Page 14. During installation/removal of memory modules, the battery must remain

removed from the notebook and the notebook must not be connected to the AC adapter, see "

Only use memory modules that have been approved for use in your notebook (see chapter "

Never use force when installing or removing a memory module. Make sure that no foreign objects fall into the memory upgrade compartment.

You must open the memory upgrade compartment to remove or install a memory module. On some devices, it is possible that opening the compartment exposes various components. Only authorized specialists are permitted to remove or change these components. Therefore, be sure to observe the following:

Individual components can become very hot during operation. Therefore, we recommend that you wait one hour after switching the notebook off before removing or installing memory modules. Otherwise, there is a risk of suffering burns!

As some components are exposed that are sensitive to static electricity, please take note of chapter "

Preparing to remove components", Page 77.

Technical data", Page 97).

Notes on installing and removing boards and components", Page 76.

expansion

Fujitsu 79

Removing and installing components

during servicing

Removing a memory module

► Remove the cover "Remove the cover", Page 78

► Fold over the protective ﬁlm in the direction of the arrow.

► Carefully push the two mounting

clips outwards (1).

MemoryexpansionMemorymodule

The memory module will fold upwards (2).



► Pull the memory module out of its slot

in the direction of the arrow (3).

80 Fujitsu

Removing and installing components

Installing a memory module

during servicing

► Insert the memory module with the contacts

and the recess (a) forward in the slot (1).

MemoryexpansionMemorymodule

► Carefully push the memory module

downwards until you feel it click into place (2).

► Fold over the protective ﬁlm in the direction of the arrow. ► Fasten the cover again, see "

Attaching the cover", Page 84

Fujitsu 81

Removing and installing components

during servicing

Installing and removing an M.2 m

Removing the M.2 module

► Fold over the protective ﬁlm in the direction of the arrow.

odule

► Loosen the screw (1). ► Raise the M.2 module carefully upwards at the free side.

82 Fujitsu

Removing and installing components

► Pull the M.2 module out of the slot on the mainboard in the direction of

the arrow (2) and remove it from the casing.

► Fasten the cover again, see "

Attaching the cover", Page 84

Installing the M.2 module

► Remove the cover, see "Rem

ove the cover", Page 78

during servicing

► Position the M.2 module in the slot on the mainboard at a slight angle,

in the direction of the arrow (1).

► Secure the M.2 module in its location with the screw (2).

Fujitsu 83

Removing and installing components

during servicing

► Fold over the protective ﬁlm in the direction of the arrow.

Attaching the cover

► Place the cover in the correct location (1).

hten the screw (2).

►Tig ► Complete the installation, see "

84 Fujitsu

Finishing component removal", Page 85.

Removing and installing components

Finishing component removal

After you have removed or changed the system components as required, please prepare your device for operation again as follows:

► Install the battery again, see " ► Turn the notebook the right way up again and place it on a ﬂat surface. ► Reconnect the cables that were previously disconnected.

Installing a battery", Page 52.

during servicing

Fujitsu 85

Settings in BIOS Setup Utility

BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConﬁguration,BIOSSetupUtilitySetupConﬁguringsystemConﬁguringhardware

The BIOS Setup Utility allows you to set the system functions and the hardware conﬁguration for the notebook.

When a notebook is delivered, the factory default settings are effective. You can change these settings in the menus of the BIOS Setup Utility. Any changes you make take effect as soon as you save and exit the BIOS Setup Utility.

The BIOS Setup U tility program contains the following menus:

Info System Advanced

Security Boot Exit

Starting the BIOS Setup Utility

► Reboot the devi

BIOSSetupUtility

Depending on the setting for Fast Boot in the BIOS-Setup-Utility, the following



notiﬁcation may appear on the screen during start-up:

<F2> BIOS Set

► Press the fu ► If a password has been assigned, enter the password and press the Enter key.

Displays information relating to the BIOS, processor and notebook Advanced system settings Conﬁguration of various hardware components, such as mouse, keyboard,

processor Password settings and security functions Conﬁguration of the start-up sequence Exits the BIOS Setup Utility

ce (switch off/on or reboot the operating system).

up <F12> Boot Menu

nction key

If you have forgotten the password, contact your system administrator or contact our customer service center.

The BIOS Setup Utility starts.

86 Fujitsu

Settings in BIOS Setup Utility

BIOS Setup Utility operation

BIOSSetupUtility

► Use the cursor keys



► Select the option you want to change with the cursor keys ► Press the "Enter" key. ►Pressthe ► For future reference, make a note of the changes you have made (for example, in this manual).

Press theF1key to display help about operation of the BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility.

With the

key you can load the default settings of the BIOS Setup Utility.

←

→

to select the menu you wish to access to make changes.

The menu is displayed on the screen.

↑

or↓.

ESC

key to exit the selected menu.

Fujitsu 87

Settings in BIOS Setup Utility

Exiting BIOS Setup Utility

BIOSSetupUtility

You need to select the desired option in the Exit menu and activate it by pressing the Enter key:

Exit Saving Changes - save ch

► To save the current menu settings and exit the BIOS Setup Utility, select ExitSaving Changes and Yes.

The notebook is rebooted



and the new settings come into effect.

anges and exit BIOS Setup Utility

Exit Discarding Changes - Reject changes and exit BIOS Setup Utility

► To discard the changes, select Exit Discarding Changes and Yes.

The settings in place when B IOS Setup Utility was called remain effective. BIOS



Setup Utility is terminated and the notebook is rebooted.

Load Setup Defaul

► To copy the standard entries for all menus of the BIOS Setup Utility,

choose Load Setup Defaults and Yes.

ts – load default values

Discard Changes - Discard Changes without exiting BIOS Setup Utility

► To discard the changes you have made, select Discard Changes and Yes.

The settings in place when BIOS Setup Utility was called remain effective.



You can now make additional settings in the BIOS Setup Utility.

► If you want to exit the BIOS Setup Utility with these settings, select Exit Saving Changes and Yes.

Save Chan

ges - save changes without exiting

the BIOS Setup Utility

► To save the changes, select Save Changes and Yes.

The changes are saved. You can now make additional settings in the BIOS Setup Utility.



► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.

Save changes and power off

► To save the changes and switch off your device, select Save Changes and Power Off and Yes.

The changes are saved. Your device is shut down.



88 Fujitsu

Troubleshooting and tips

TroubleshootingTipsFaultProblemsolving

If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: ► Make a note of the steps and the circumstances that led to the fault. Also

make a note of any error messages displayed. ► Switch the notebook off. ► Please contact the Hotline/Service Desk.

You can contact Fujitsu Service and Support in the following ways:

• Toll free phone: 1-800-8Fujitsu (1-800-838-5487)

• Website: " Before you place the call, have the following information ready so that the customer

support representative can provide you with the fastest possible solution:

• The model name and serial number of the notebook. The serial number is located on a sticker on the underside of the notebook.

• Notes with the mess informationonaco

• Any changes you have made to the hardware or software since receiving the notebook.

• Any changes you h

• Your system conﬁguration and all peripheral devices connected to your system.

• Your sales cont

Our notebooks have been designed primarily with mobile applications in mind. This means that considerable effort has been made to optimize components and equipment in terms of weight, space and energy requirements. Depending on the particular conﬁguration you have purchased, it is possible that functionality may be slightly reduced compared to a desktop PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "

http://solu

tions.us.fujitsu.com/www/content/support/contact/index.php"

ages that appeared on the screen and

ustic signals.

avemadetotheBIOS Setup settings after receiving the notebook.

ract.

http://solutions.us.fujitsu.com"

Help if problems occur

Should you encounter a problem with your computer that you cannot resolve yourself: ► Note the ID number of your device. The ID number is found on the type rating

plate on the back or underside of the casing.

► For further clariﬁcation of the problem, contact the Fujitsu Service Desk. When you do

this, please have ready the ID number and serial number of your system.

In the event you need to recover your system

In the event you need to restore your original Factory Image, please refer to the appendix of this Operating Manual.

Fujitsu 89

Troubleshooting and tips

The notebook’s date or time is in

IncorrecttimeTimenotcorrectWrongdate/timeDatenotcorrect

Cause Troubleshooting

Time and date are incorrect. ► With the BIOS-Setup-Utility,

Date and time are still set incorrectly after switching on the notebook.

date and time in the Main menu.

► Please contact your sales out

hotline/service desk.

correct

Battery indicator does not illuminate

Cause

The battery is not installed correctly.

The battery is discharged.

When certain c

haracters are entered on the

Troubleshooting

► Switch the notebook off. ► Check whether the batte

correctly in its comp ► Switch the notebook on. ► Charge the battery.

► Install a charged battery.

► Connect the notebook to a AC outlet

using the AC adapter.

artment.

keyboard, only numerals are written

Cause Troubleshooting

The virtual n activated,

see "

umber keys of your device are

Virtual number keys", Page 47

► Press the

Num

button.

you can set the

let or our

ry is installed

The notebook’s LCD screen remains blank

Dscreen

LCDscreenBlankLC

Cause Troubleshooting

Screen is switched off. ► Press a key or touch the Clickpad. External monitor or television set connected.

90 Fujitsu

► Press the key for changing over the screen

output, see "

Hot keys", Page 43.

Troubleshooting and tips

The LCD screen of the notebook is difﬁcult to read

LCDscreenLCDscreen

Cause Troubleshooting

Reﬂected glare ► Turn the notebook or alter the tilt of the LCD

screen.

► Increase the brightness of the screen.

The external monitor rem

Monitor

Cause Troubleshooting

Monitor is switched off. ► Switch the external monitor on. Power saving has been activated (monitor is

blank). Brightness is set to dark. Screen output is set to the notebook’s LCD

screen The external monitor’s AC cable or data cable is

not connected properly.

The extern

MonitorMonitor

Cause Troublesh

The wrong or the wro the appli

ng screen resolution has been set for

cation program.

al monitor is blank or the image is unstable

external monitor has been selected

ains blank

► Press any key to continue.

► Adjust the brightne ► Press the key for changing over the screen

output, see "

► Switch off the external monitor and the

notebook.

► Check whether the AC cable is plugged

properly into the external monitor and into the power outlet.

► Check whether the data cable is properly

connected to the notebook and the external monitor (if it is plugged in with a connector).

► Switch on the external monitor and the

notebook.

ooting

► Terminat

Windows b error per use the k (see " to the L Change

► Set the screen resolution: Set the screen

resolution as described in the documentation for your operating system.

►Selec

desc oper

e the application program under

sists after terminating the program,

ey for switching the screen output

t keys", Page 43), in order to switch

CD screen of the notebook.

the following setting:

t monitor: Select monitor 1 or 2 as

ribed in the documentation for your

ating system.

ss of the monitor.

Hot keys", Page 43.

y pressing

Alt+F4

.Ifthe

Fujitsu 91

Troubleshooting and tips

The cursor does not correctly follow the stylus movements

Cause

Stylus incorrectly calibrated. ► Calibrate the stylus as shown under

Troubleshooting

Hardware and Sound / Tablet PC Settings

in the Control Panel, see "

stylus", Page 37 and "Calibrating the stylus",

Page 37.

Adjusting the

Stylus input not working

Cause

Incorrect driver installed.

The stylus is in power saving mode.

The stylus battery is completely discharged.

Troubleshooting

► If your device is one which can only be

operated using the stylus, install the driver

for the standard model.

► If your device is one which can be

operated using the stylus and by ﬁnger, install the driver for the "Dual Digitizer" model.

► Press gently on the tip of the stylus to

reactivate the stylus. ► Carefully insert the stylus in its slot on the

notebook to charge the stylus battery.

The notebook does not start after switching it on

Notebook

Cause Troubleshooting

The battery is not installed correctly.

The battery is dead.

The AC adapter is not connected properly. ► Check whether the AC adapter is properly

92 Fujitsu

► Check whet

correctly ► Switch the notebook on. ► Charge the battery.

► Insert a charged battery.

► Connect the AC adapter to the notebook.

connected to the notebook. ► Swit

her the battery is installed

in its compartment.

ch the notebook on.

Troubleshooting and tips

The notebook stops working

NotebookEnding

Cause Troubleshooting

The notebook is in energy savin An application program has ca

malfunction.

g mode.

used the

► End energy saving mode. ► Close the application program or restart

the notebook (by restarting the operating system or switching the device off and back on again).

The battery is dead.

► Charge the battery.

► Insert a charged battery.

► Connect the AC adapter t

o the notebook.

The printer does not print

rint

Printerdoesnotp

Cause Troubleshooting

The printer is not switched on. ► Make sure that the printer is switched

The printer is not connected correctly.

The printer driver is faulty or not correctly installed, or it is the wrong printer driver.

on and ready for operation (refer to the documentation supplied with the printer).

► Check that the data cable connecting

the notebook to the printer is properly connected.

► Check whether the correct printer driver is

loaded (refer to the printer documentation).

The wireless connection to a network does not work

ssconnectiontoanetworkdoes notwork

Thewirele

Cause Troubleshooting

The wireless component is switched off. ► Switch the wireless component on (see

The wireless component is switched on. Despite this, the wireless connection to a network does not work.

Fujitsu 93

Switching the wireless components on and

" off", Page 56).

► Check whe

enabled b

ther the wireless connection is

y the software.

► Further information on using the wireless

component can be found in the help ﬁles.

Troubleshooting and tips

The battery discharges too quic

Battery

Cause

The battery is either too hot or case the battery indicator ﬂas

You may have an application running that consumes a great deal of power due to frequent accessing of the hard disk or optical drive.

The maximum brightness may have been set for the screen.

too cold. In this

hes.

Troubleshooting

► Move the notebook so that its te

► If the operating time of the battery life is

► Use the AC adapter whenever possible.

► Set the screen slightly darker with the key

kly

returns to within the normal ra

extremely short, the battery is probably too

old. Replace the battery if necessary.

for Decreasing the screen brightness in order to

reduce the amount of power being drawn.

Smart Card reader is not recognized

Cause

Smart Card inserte

d incorrectly.

Troubleshooting

► Make sure you have i

Card into the Smart

thechipfacingup

(device-depende ► Check whether the Smart Card you are

using is supported. Your Smart Card must

comply with the ISO standard 7816-1, -2,

-3 and -4.

mperature

nge.

nserted your Smart

Card reader with

wards / downwards

nt).

Smart Card PIN forgotten

Cause

PIN forgotten ► If you are working in a network, contact your

Troublesho

oting

system administrator, who can unlock your

notebook with a Supervisor PIN.

Smart Card lost

Cause

Smart Card lost. ► If you are working in a network, contact your

94 Fujitsu

Troubleshooting

system administrator, who can boot your

notebook with a Supervisor Smart Card.

Troubleshooting and tips

User and/or supervisor SmartCard lost

Cause

User and/or supervisor SmartCard lost ► If you have lost your user SmartCard, you

Troubleshooting

can continue to work with the supervisor SmartCard.

► If you have lost the supervisor SmartCard,

you can also continue working, but you no longer have all rights and cannot initialize another supervisor SmartCard.

Acoustic warning

Acousticwarn ingsErrors

Cause

A beep sounds every few seconds. The battery is almost dead.

Troubleshooting

► Charge the battery.

Error messages on the screen

nthescreen Errormessageso

Errors

This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programs are described in the documentation for these programs.

If the error message appears repeatedly despite troubleshooting measures, contact the place of purchase or our customer service center.

Error message/cause Troubleshooting

CMOS Battery Bad

If the error message occurs repeatedly, the

► Contact your sales outlet or our customer

service center.

back-up battery in the notebook is dead.

System CMOS checksum bad - Default conﬁguration used

The system conﬁguration information is incorrect.

► Switch the notebook off. ► Switch the notebook on. ► Press the function key

BIOS Setup.

to access the

►IntheBIOS Setup, select the Exit menu. ► Select the entry Load Setup Defaults. ►SelectOK and press the Enter key.

Extended memory failed at offset: xxxx Failing Bits: zzzz zzzz

► Check

whether the additional memory

e has been inserted correctly.

modul

When testing the extended memory. an error has resulted at the address xxxx.

Failure Fixed Disk n

The settings of the hard disk drive are incorrect.

rt the BIOS Setup (Primary Master

►Sta

menu) and select the correct settings.

sub

Fujitsu 95

Troubleshooting and tips

Error message/cause Troubleshooting

Keyboard controller error

► Switch off the notebook with the

switch.

► Wait 3 - 5 seconds and switch on the

notebook again.

Keyboard error

If you use an external keyboard: ► Check the connection and reboot the

notebook.

nn Stuck key Operating system not found

► Make sure that no key is pressed. ► Check in the BIOS Setup whether your hard

disk has been set correctly.

► Make sure that the operating system is

installed on the corresponding drive.

Press <F1> to resume, <F2> to SETUP

This error message appears if an error occurs during the self-test before starting the operating system.

Previous boot incomplete - Default conﬁguration used Default values have been set for certain

► Press the

operating system.

► Press the function key

BIOS Setup.

► Press the

to do so. settings because of an error which occurred in the previous system boot. Check the settings in the BIOS Setup.

Real time clock error

► Contact your sales outlet or our customer

service center.

nnnnK Shadow RAM failed at offset: xxxx Failin g Bits: zzzz

System bat

tery is dead - Replace and run SETUP

► Contact your

service cent

► Contact your sales outlet or our customer

service center.

System cache error - Cache disabled

► Contact your sales outlet or our customer

service center.

System timer error

►Contact

service

your sales outlet or our customer

center.

ON/OFF

function ke

function key when prompted

y to start the

to access the

sales outlet or our customer

er.

96 Fujitsu

Technical data

Notebook

General

Processor

7th Generation Intel

Intel

Core™i7-7600U processor (4 MB cache,

up to 3.9 GHz)

Intel

Core™i7-7500U processor (4 MB cache,

up to 3.5 GHz)

Intel

Core™i5-7300U processor (3 MB cache,

up to 3.5 GHz)

Intel

Core™i5-7200U processor (3 MB cache,

up to 3.1 GHz)

Intel

Core™i3-7100U processor (3 MB cache,

up to 2.4 GHz)

Intel

Celeron®3965U processor (2MB cache,

up to 2.20 GHz) Optional Intel

Main memory (SO DIMM) Maximum 16 GB DDR4

1 slot for 4, 8 or 16 GB modules

Electrical data

Safety regulations complied with CE, cULus Protection class III Maximum power consumption (with the

notebook switched on and the battery charging):

65 W (without USB Type-C dock) / 90 W (with USB Type-C dock)

LCD screen

Size 31.75 cm / 12.5" TFT FHD or HD (conﬁguration

dependent)

Resolution HD: 1366 x 768 pixels

FHD: 1920 x 1080 pixels

16M colors Pixel class II Brightness control 11 levels Technology Wide-View High-Bright Display with LED

background lighting Digitizer and glass panel

ebcam

• Dual Digitizer / Touch and Pen support rdened glass

•Ha

HD (720p) with status indicator and two microphones

Display adapter

Core™with ULT processors

Core™vPro™processor

Fujitsu 97

Technical data

Chip Intel® HD Graphics 620 Maximum resolution of externa

l monitor:

HDMI: 4096 x 2160 pixels

Dimensions

Width x Depth x Height

from

11.77 inch x 8.23 inch x 0.74 inch 299 x 209 x 18,8 mm

Weight depending on conﬁguration from

2.84 lbs

1.29 kg

Input devices

Keyboard

Touchpad

high-quality, spla keyboard with 84 key

Touchpad cursor control pad with right and left

shproof and antimicrobial

s, optional backlit

command button, supports: Capacitive Touch, external USB keyboard, Wacom AES stylus and mouse

Stylus

2 stylus buttons

Slots

Storage card slot 1 x SD Card SmartCard slot

Ports

HDMI port 1 x VGA port LAN port

1x Socket, RJ45

USB (Universal Serial Bus) 1 x Type-C USB 3.1 Gen 1 port, 2 x Type-A USB

3.0 ports (1 x Anytime USB Charge)

yLock

Securit

t conditions

Ambien

Environment class DIN IEC 721 Mechanism class DIN IEC 721

ating temperature

Oper

7K1 7M2 41°F

5°C.

.... 95 °F

... 35 °C

Transit temperature (2K2) 5°F .... 140 °F

–15 °C .... 60 °C

ndows 10 S conﬁgurations: You can connect a headphone. However,

icrophone, Line-In and Line-Out are not supported.

he data sheet for the device provides further technical data. You can ﬁnd thedata

T sheet on your device or you can download it from the Internet at "

www.fujitsu.com/us" .

98 Fujitsu

Fujitsu P728 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual