Display
Operating Manual
P24W-6 IPS
Downloaded from ManualMonitor.com Manuals
Congratulations, you have
decided to buy an
innovative Fujitsu product.
Latest information about our products, tips, updates etc. can be found on
the Internet at: "
http://ts.fujitsu.com"
For automatic driver updates, go to: "http://support.ts.fujitsu.com/ support/index.html"
Should you have any technical questions, please contact:
• Our Hotline/Service Desk
(see the Service Desk list or visit: "
http://ts.fujitsu.com/support/servicedesk.html")
• Your authorized distributor
• Your sales office
We hope you really enjoy using your ne w Fujitsu system.
Downloaded from ManualMonitor.com Manuals
Downloaded from ManualMonitor.com Manuals
Copyright
Fujitsu Tec
hnology Solutions 11/03
Published by
Fujitsu Technology Solutions GmbH
Mies-van-
der-Rohe-Straße 8
80807 Munich, Germany
Contact
h
ttp://t
s.fujitsu.com/support
All rights reserved, including intellectual property rights. Subject to technical alterations. Delivery subject to availability.
No warranty is offered or liability accepted in regard of the com pleteness, correctness, or current applicability of any
data or
illustrations. Brand names may be protected trademarks of the res pective manufacturer and/or protected
by copyright. Use of these by third parties for their own purposes may constitute an infringement of the holders’
rights. Further information can be found at "
http://ts.fujitsu.com/terms_of_use.html"
Order No. Fujitsu Technology Solutions GmbH: A 26361-K1371-Z320-1-7619, edition 2
Downloaded from ManualMonitor.com Manuals
P24W-6 IPS
Operating Manual
Your LCD screen... 5
Important notes 7
Getting started 10
Operation 17
Notes on ergonomic colour adjustment 27
Troubleshooting 28
Explanatory information about
standard ISO 9241-307 30
Technical specification 31
Downloaded from ManualMonitor.com Manuals
Windows 7, Windows Vista and W indows XP are registered trademarks of Microsoft Corporation.
VESA, DDC and DPMS are registered tradema rks of Video Electronics Standards Association.
All other trademarks used in this document are trademarks or registered trademarks of
their respective owners and are recognised as being protected.
Copyright © Fujitsu Technology Solutions GmbH 2011
All rights reserved, including rights of translation, reproduction by printing, copying
or similar methods, either in part or in whole.
Offenders will be liable to p rosecution and payment of damages.
All rights reserved, including rights created by p atent grant or registration of a utility model or design.
Delivery subject to availability. Subject to technical alterations.
Downloaded from ManualMonitor.com Manuals
Contents
Contents
Your LCDscreen... ..................................................................... 5
Target group ............................................................................ 5
Furtherinformation ...................................................................... 6
Notational conventions .................................................................. 6
Important notes ........................................................................ 7
Safety instructions ...................................................................... 7
Powercable ............................................................................ 8
Transporting the devic
e ..................................................................
8
Cleaning thedevice ..................................................................... 8
CEmarking ............................................................................ 9
Power management . . . .................................................................. 9
Disposal and recycli
ng ..................................................................
9
Gettingstarted ......................................................................... 10
Unpacking and checking the delivery . . ................................................... 10
Settingupthe device .................................................................... 11
Setting up an ergonomic video workstation ............................................ 11
Adjusting height ..................................................................... 13
Adjusting theinclination .............................................................. 13
Removingmonitorbase .............................................................. 14
Connecting the device . .............................................................. 15
Connecting cables to the computer ................................................... 16
Operation .............................................................................. 17
Switching the
device onand off ..........................................................
17
Notes on powe
rmanagement ............................................................
18
Changing the
monitorsettings ............................................................
19
Changing the
monitor settings with the buttons of the control panel . .....................
19
Changing th
emonitor settingsusingtheOSD menu ....................................
22
Notesonergonomic colour adjustment ................................................ 27
Troubles
hooting .......................................................................
28
Explanatory information about stand ard ISO 9241-307 . . . . . ............................. 30
Technic
al specification .................................................................
31
VESA-DD
C-compatible VGAinterface ....................................................
32
Preset o
perating modes . . . . . . ...........................................................
32
Most fr
equent operating modes .......................................................
32
SUB D po
rt .............................................................................
33
DVI-D
port ..............................................................................
34
Displ
ayPort socket ......................................................................
35
Fujitsu Technology Solutions 3
Downloaded from ManualMonitor.com Manuals
Contents
4 Fujitsu Tech nology Solutions
Downloaded from ManualMonitor.com Manuals
Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
• TFT display (Thin Film Transistor; active matrix)
• minimal space requirement
s thanks to slim casing
• optimum ergonomic characteristics (totally distortion-free, excellent picture
definition and colour purity right into the corners)
• high degree of brightne
ss and good contrast
• high resolution (1920 x 1200)
• presentation of up to 1
6.7 million colours (in conjunction with an ap propriate display adapter)
• automatic scanning of horizontal frequencies from 30 to 82 kHz and refresh rates
(vertical frequencies) from 56 to 76 Hz (absolutely fl icker-free )
• digital screen contr
oller with microprocessor for storing 46 different display modes
• freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
• convenient o pera
tion via integrated OSD (On-Screen-display) menu
• VESA-DDC compatibility
• VESA-FPMPMI com
patibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting device
for swivel arm and wall bracket
• Plug&Play capability
• Digital video
inputs (DVI and display port DP) with HDCP
• power manag ement for reducing power consumption when the computer is not in use
• Compliance w
ith the recommendations according to TCO ’03
• the monitor fulfills all GS ("Geprüfte Sicherheit", Certified Security) requirements.
This operat
ing manual contains important information you require to start up and run your LCD monitor.
A graphics c
ard (display adapter) with VGA interface or a digital display adapter with DVI interface
or video si
gnal source with DP interface is required to control the LCD monitor. The monitor
processes
the data s upplied to it by the display adapter. The display adapter or the associated
driver so
ftware is responsible for setting the m odes (resolution and refresh rate).
When putt
ing the monitor into operation for the first time, the screen display should be
optimal
ly adapted to the display adapter used and adjusted in accordance with your
needs (s
ee chapter "
Changing the monitor settings", Page 19.
Target group
You don’t need to be an "expert" to perform the operations described here.
Nonetheless, it is important to always obse rve the safety notes given in the operating
instructions for the computer and in this manual.
In the event of any problems, please contact your sales office or our Service Desk.
Fujitsu Technology Solutions 5
Downloaded from ManualMonitor.com Manuals
Your LCD screen...
Further information
Details of how you set the resolution and refresh rate are provided in the documentation
for your display adapter and t he associated driver software.
For ergonomic reasons, a screen resolution of 1920 x 1200 pixels is recommended.
Because of the technology used (active matrix) an LCD monitor provides a totally
flicker-free picture even with a refresh rate of 60 Hz.
Notational conventions
Pay particular attention to text ma rked with t his symbol. Failure to observe
these warnings could pose a risk to health, damage the device or lead
to loss of data. The warranty w ill be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates important information for the proper use of the device.
►
Indicates an activity t hat must be performed
Indicates a result
This font
indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font
indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e. g. Windows or setup.exe.
"This fon
t"
indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "
http://ts.fujitsu.com"
• Names of CDs, DVDs and titles or designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety" Manual
Key
indicates a button on the monitor, e.g:
MENU
This
font
indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the device
6 Fujitsu Tech nology Solutions
Downloaded from ManualMonitor.com Manuals
Important notes
Important notes
ImportantnotesNotes
In this chapter you will find information regarding safety which it is essential to
take note of when working with your device.
Safety instructions
This device complies w it
h the relevant safety regulations for data processing equipment,
including electronic of
fice machines for use in an office environment. If you have
any questions about whe
ther the device can be used in the intended environment,
please contact your sal
es office or our Service Desk.
• The display surface of
the device is sensitive to pressure and scratches. You should therefore
be careful with the dis
play surface in order to avoid lasting damage (scratches).
• If the device is brought into the installation site from a cold environment, condensation
can form. Before operating t he device, wait until it is absolutely dry and has reached
approximately the same temperature as the installation site.
• When installing an
d operating the device, please observe the notes on environmental
conditions in Chap
ter "
Technical specification", Page 31 as well as the instructions in
Chapter "
Setting
up an ergonomic video workst ation", Page 11.
• To ensure sufficient ventilation, th e air inlet and outlet openings of the device must be kept clear.
• The device autom
atically sets itself to the correct voltage within the range from 100 V to 240 V.
Make sure that t
he local mains voltage is neither higher nor lower than this range.
• Ensure that the power socket on the device and the mains outlet are freely accessible.
• The ON/OFF swi
tch does not disconnect the monitor from the mains voltage. To disconnect
fully from the
mains supply, disconnect the power plug from the socket.
• The device is equipped with a power cable that complies with safety standard s.
• Use the suppl
ied power cable only.
• Lay the cables in such a way that they do not create a hazard (danger of tripping)
and cannot be damaged. When connecting the device, observe the relevant
notes in chapter "
Connecting the device", Page 15.
• No data tra
nsfer cables should be connected or disconnected during a thunderstorm.
• Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get
inside the device (danger of electric shock, short circuit).
• The devic
e is not waterproof! Never immerse the device in water and protect
it from s
pray water (rain, sea water).
• In an emergency (e.g. damaged casing, operation controls or cables, penetration
of liquids o r foreign matter), switch off the device, disconnect the power plug
and contact your sales outlet or our Service Desk.
• Repai
rs to the device must only be performed by qua lified technicians. Unauthorised opening
and in
correct repair may greatly endanger the user (electric shock, fire risk).
• Only use the screen resolution settings and refresh rates specified in Chapter
"
Technical specification", Page 31. Otherwise you may damage the device. If you
are in any doubt, contact your sales outlet or our Help Desk.
•Usea
screen saver with moving images and activate the power management for
you
r monitor t o prevent still images from "burning in".
• If you operate the device with the swivel arm or wall bracket, it must not be turned by 180°.
Fujitsu Technology Solutions 7
Downloaded from ManualMonitor.com Manuals
Important notes
• The device must only be operated in landscape mode (0°) and portrait mode (90°). The
control buttons are located in the middle of the bottom of the monitor in landscape mode
(0°) and at the left-hand side of the monitor in portrait mode (90°).
• Store this manual close to the device. If you pass the device on to third
parties, you should pass this manual on with it.
• We recommend that you place your de vice on a durable, non-slip surfa ce. In view
of the many different finishes and varnishes used on furniture, it is possible that the
feet of the device may mark the surface they stand on.
• To ensure s ufficient ventilation, the air supply and air outlet op enings of
the monitor must never be blocked.
Power cable
Use the supplied power cable only.
Use the following guidelines if it is necessary to replace the original cable set.
• The female/male receptacles of the cord set must meet I EC60320/CEE-22 requirements.
• The cable has to be HAR-certified or VDE-certified. The mark HAR or
VDE will appear on the outer sheath.
• For devices which are mounted on a desk or table, type SVT or SJT cable sets may be
used. For devices which sit on the floor, only SJT type cable sets may be used.
• The cable set must be selected according to the rated current for your device.
• If necessary, replace the original power cable with a regular grounded 3-core mains lead.
Transporting the device
Device,Transportatio nRetransportation
Transport all parts separately in their original packaging or in a packaging which
protects them from knocks and jolts, to the new site.
Do not unpack them until all transportation manoeuvres are completed.
If the device is brought from a cold environment into the room where it will be used,
condensation may occur. Before operating the device, wait until it is absolutely dry
and has reached approximate ly the same temperature as the insta llation site.
Cleaning the device
Switch off the device and unplug the power plug.
Do not clean any interior pa rts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the device.
The display surface of the device is sensitive to pressure and scratches. Clean
it only using a soft, slightly moistened cloth.
The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that
has been moistened in mild domestic d eterge nt and the n carefully wrung out.
8 Fujitsu Tech nology Solutions
Downloaded from ManualMonitor.com Manuals
Important notes
CE marking
The shipped version of this device complies with the re quirements of EEC
directives 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC
"Low voltage directive".
Power management
The Fujitsu LCD monitor is equipped with a power management system which, when in
0W power-saving mode, reduces the power consumption to 0W.
Disposal and recycling
This device has been manufactured as far as possible from materials which can be recycled or
disposed of in such a way that the environment is not damaged. The device may be taken back after
use to be r eused or recycled, provided that it is returned in a condition that befits its intended use.
Any components not reclaimed will be disposed of in an environmentally acceptable manner.
The device must be disposed of in accordance with the local regulations for disposal of special waste.
If you have any questions on d isposal, please contact your local sales office or our
Service Desk, or contact one of the following directly:
Germany
Belgium
Switzerland
Fujitsu Technology Solutions
GmbH
Remarketing and Recycling
D-33106 Paderborn
Tel.: +49 5251 / 81 80 10
Fax: +49 5251 / 81 80 15
"
http://ts.fujitsu.com/wvm"
RECUPEL
Boulevard R eyers, 80
B-1030 Brussels
Tel.: +32 2 / 706 86 16
Fax: +32 2 / 706 86 13
E-Mail: info@recupel.be
"
http://www.recupel.be"
SWICO
Schweizerischer
Wirtschaftsverband de r
Informations-, Kommunikationsund Organisationstechn ik
A list of the SWICO acceptance
places can be found at:
"
http://www.swico.ch"
Asia
USA
Taiwan :
Environmental Protection
Administration
Executive Yuan R.O .C.
"
http://recycle.epa.gov.tw"
Fujitsu America, Inc.
1250E. Arqu es Avenue
Sunnyvale, CA 94085 U.S.A.
Contact: Henning, Bernd
Phone No.: (408) 329-6737
Fax No.: (408) 746-8299
Info
rmation on this subject is also available on the Internet at "
http://ts.fujitsu.com/recycling" .
Fujitsu Technology Solutions 9
Downloaded from ManualMonitor.com Manuals
Getting started
Getting started
Unpacking and checking the delivery
The display surface of the device is sensitive to pressure and scratches.
Always hold the device by the casing!
The complete device package includes:
• one monitor
• one data cable (DP)
• one data cable (DVI)
• one data cable (VGA)
•oneUSBcable
• one audio cable
• one power cable
• one CD with software and documentation
• one Warranty Booklet
• one "Quick Start Guide" brochure
• one "Safety" manual
► Unpack all the individual parts.
► Check the contents of the package for any visible damage caused during transport.
► Check whether the delivery conforms to the details in the delivery note.
► Should you discover that the delivery does not correspond to the delivery
note, notify your local sales outlet immediately.
Do not discard the original packing material of the devices. You may need the
packaging in th e future if you need to transport your device.
10 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Getting started
Settingupthedevice
To ensure sufficient ventilation, the air inlet and outlet openings of
the device must be kept clear.
Setting up an ergonomic video workstation
1
► Do not position the video workstation
opposite a window (1).
1
► Position th e monitor outside the reach
of a light source (1).
Fujitsu Technology Solutions 11
Downloaded from ManualMonitor.com Manuals
Getting started
1
► Position the keyboard w here it is
easiest to reach (1).
1
50 cm
► Position the monitor so that the eye distance
to the screen (1) is around 50 cm.
► Position the monitor for optimum viewing
(1). The monitor should under no
circumstances f all outside the permissible
viewing space (2).
Depending on the situation, it m ay be advisable to use a swivel arm or wall
bracket (VESA FPMPMI), which are available from specialist dealers. For
this purpose the monitor base must be removed beforehand as described
in Chapter "
Removing monitor base", Page 14.
12 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Getting started
Adjusting height
The height adjustment is fixed in the transport position.
1
2
► To free the fixing, remove the locking
pinontheflange (1).
The height of the monitor can be adjusted
by approximately 120 mm.
► Grasp the monitor with both hands on
the right and left edge of the casing
and move it up or down (2).
Adjusting the i
nclination
The inclination of the monitor can be adjusted by -3° (forward) and +35°
(back) from its vertical position.
► Hold the monitor with both hands on the left and right sides of the casing
and move it to the desired angle.
Fujitsu Technology Solutions 13
Downloaded from ManualMonitor.com Manuals
Getting started
Removing monitor base
Before you can use a swivel arm or a wall bracket, you must remove the monitor base.
The display surface is susceptible to scratching!
1
1
1
1
► Switch off the monitor and pull the power
plug out of the power socket.
► Lay the monitor on its face on a soft surface.
► Remove the cover and disconnect all cables.
► Remove the screws (1) on the rear
of the monitor.
You can now mount a swivel arm or a wall
bracket in accordance with VESA FPMPMI
using a hole spacing of 100 mm.
For instructions on how to mount the swivel arm or wall bracket, please see
the documentation for the swivel arm or wall bracket.
14 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Getting started
Connecting the device
Please observe the safety information in "Important notes", Page 7.
CE conformance and optimum picture quality are guaranteed only if
you use th e data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug
from the computer.
Connecting cables to the monitor
The monitor ports are pr
otected by a cover.
The supplied data cable
s have two 15-pin D-SUB connectors or two 24-pin DVI connectors
or two 20-pin DP-conne
ctors for connection to the monitor and to the computer.
Informationontheco
mputer connections and interfaces is contained in the
operating manual fo
r the computer.
1
2
10
345 678910
1=Securi
ty slot for "Kensington Lock"
2=Cover
3=Power
connector
4=0Wswitch
5=DPco
nnector
6=DVI-Ds
ocket (DVI)
7 = D-SUB socket (VGA)
8 = AUDIO
-IN socket
9 = USB IN (Downstream)
10 = USB O
UT (Upstream)
Fujitsu Technology Solutions 15
Downloaded from ManualMonitor.com Manuals
Getting started
► Remove the cover.
► Select the appropriate dat a cable for your computer.
► Connect one of the connectors of the data cable to the D-SUB socket or the DVI-D socket or the
DP socket of the monitor and secure the plug connection by tightening the retaining screws.
If you are u sing a display p ort data cable, you m ust switch the 0 W switch to
the Basic setting. If you are only using a DVI or VGA data cable, you can switch
the 0 W switch to the ECO setting to activate the 0 W standby.
The monitor automatically detects the input when only one signal source is connected.
► Insert one connector of t
he audio line in the AUDIO IN (8) socket on the
monitor and make sure it
is properly engaged.
► Plug the power cable supplied into the power connector of the monitor.
► Plug the supplied USB c
able into the USB IN socket (9) and the other end of
the cable into a USB so
cket of the computer.
Connect the USB keyb
oard and USB mouse directly to th e PC, as the USB connector
socket of the monito
r is switched off in energy-saving mode.
► Secure the cover over the connections.
A lock ( Kensington Lock) can be mounted in the security slot to protect the monitor
against theft. A Kensington lock is not supplied with the monitor.
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the
operating manual for your computer.
► Connect the data cable to the (active) monitor port on the computer and secure
the plug-in connection by tightening the s afety screws.
► Insert the other plug of the audio cable in the audio output of the computer.
► Plug the power conn ector of the monitor into a properly grounded mains outlet.
► Plug the power connector of the computer into a properly grounded mains outlet.
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graphics card is active as standard.
16 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Operation
Operation
Switching the device on and off
1 23
12
1=SwitchOn/Off
2 = Power suppl
y indicator
3 = 0 W switch
The colour of the LED indicator changes as follows:
LED indicator Status
blue
Monitor and computer are switched on (normal mode).
green
Monitor and computer are switched on (ECO mode).
orange
Monitor is n ot receiving a video signal or is in power saving mode.
does not light up
Monitor is switched off (or is in 0W power-saving mode).
Theswitchsetting"0"ofthe0Wswitch(3)onthereversesideactivatesthe
ECO power- saving mode (0 W operating mode) and the switch setting "I"
switches to the BASIC power saving mode <1 W. This setting is required for t he
DP data cable. In some PC s, it can, however, also be necessary for VGA or
DVI if the screen remains unlit in the 0 W operating mode.
► Switch the device on again with the ON/OFF switch (1).
Fujitsu Technology Solutions 17
Downloaded from ManualMonitor.com Manuals
Operation
Notes on power management
If your computer is equipped with power managem ent (power-saving mode), the monitor can fu lly
support this function. Here the monitor does not di stinguish between the individual energ y-saving
modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of
immediately switching into the mode with the highest energy-saving effect.
Stage Operation Power-saving mode (0 W switch)
Normal
ECO ECO (0) BASIC (|)
Power supply
indicator
Lights up blue Lights up blue is unlit illuminated
orange
Display Max. brightness
typ. 175 cd/m
2
unlit Unlit
Typical power
consumption
(without USB and
audio)
78 W 47 W reduced to 0 W reduced to < 1 W
If the computer detects inactivity (no input) it sends an appropriate signal to th e monitor
to reduce the power consumption (power saving mode). The power indicator of the
monitor c hanges colour to show the change in status. The ECO operating mode and
BASIC power-saving mode are the preset factory defaults.
Once an input is made at the computer the screen contents are restored.
For detailed information on how energy-saving mode operates, please refer to
the operating manual or technical manual of the computer.
18 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Operation
Changing the monitor settings
When putting the monitor into operation for the first time, the screen display should
be optimally adapted to the display adapter used.
Changing the monitor setti
ngs with the buttons
of the control panel
The buttons of the control panel have two functions. If the OSD menu is
activated, a description of the current function of the buttons is displayed
directly above the buttons at the edge of the screen. I f the OSD menu is not
activated, you can make the following settings directly:
123
1 = Buttons for the OSD menu (On
Screen Display)
2 = ON/OFF switch
3 = Power supply indicator
Select OSD language
If one of
the buttons is being pressed for the first time for the OSD menu, the
selecti
on screen for the language is displayed:
► Press the
ECO
/ or the
INPUT
/ button to select the required language.
► Press the
MENU
/ button to confirm your entries or the
AUTO
/
button to cancel the process.
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Performing auto-adjustment of the m onitor
► P
ress the
AUTO
/ button for about 1 second.
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Fujitsu Technology Solutions 19
Downloaded from ManualMonitor.com Manuals
Operation
Selecting input signal (D-SUB/DVI-D/HDMI)
► Press the
INPUT
/ buttontocalluptheInput select settings window.
► Press the
ECO
/ or the
INPUT
/ button to select the desired
monitor connection (VGA, DVI or DP).
► Press the
MENU
/ buttontoconfirm your selection or the
AUTO
/ button to cancel the process.
This setting window can also be called up when the O SD menu is locked.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
MENU
/ button for a few seconds while you switch
on the monitor using the ON/OFF switch.
The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO
/ button to switch the ECO operating mode on or off.
The message ECO Mode ein or ECO Mode off appears.
If the ECO
operating mode is activated, the following OSD settings are changed:
Mode
Office
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
20 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Operation
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press and hold th e
ECO
/ and
INPUT
/ buttons at the same time for a few seconds.
The message Power button loc
ked / unlocked is displayed.
Proceed in the same way to r
elease the locked ON/O FF switch again.
Fujitsu Technology Solutions 21
Downloaded from ManualMonitor.com Manuals
Operation
Changing the monitor settings using the OSD menu
With the buttons on the control panel, you can call up and use the integrated
OSD (On-Screen Display) m enu.
The E nglish menu names are used in the following descrip tion (default setting).
► Press the
MENU
/ button to activate the OSD menu.
The main menu appears, with icons for the setting functions.
The first symbol, (Brightness/Contrast), is highlighted and the associated functions
are visible in the right-hand menu field.
► Press the
ECO
/ or the
INPUT
/ button to highlight another icon (e.g. I mage adj ust ).
► Press the
MENU
/ button to select the highlighted icon.
The Image adjust settings window is displayed.
► Press the
AUTO
/ button to exit the main menu.
22 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Operation
► Press the
ECO
/ or INPUT / button to highlight another function.
► Press the
MODE
/ button or the / button to change the setting.
► Press the
ECO
/ or the
INPUT
/ button to highlight another function.
► Press the
MENU
/ b
utton to save the change or press the
AUTO
/ button
to exit the
function without making any changes.
If you wan
t to change other settings, select the corresponding function from the OSD
main menu
. All possible adjustments of the main menu are described in the following.
Fujitsu Technology Solutions 23
Downloaded from ManualMonitor.com Manuals
Operation
OSD menu functions
The OSD menu for analogue monitor operation is described below. During
digital operation some functions are not available, they are not ne eded because
of the digital transmission technology being used.
Adjusting the brightness and contrast
Call up the Brightness/Con
trast setting window
Brightness
Set the brightness of the display
With this function you change the brightness of the background lighting.
Contrast
Set the contrast of the di
splay
With this function you m
odify the contrast of bright colour tones.
Black level
Set the brightness of the display
With this function you modify the contrast of dark colour tones.
Auto Brightness
Automatic brightness control
This function is used to automatically cont rol the brightness of the
background lighting using the light sensor.
On = The brightness is adjusted according to the ambient brightness
Off = The brightness is adjusted m anually by the user
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
The f unct ion is executed by clicking the
button.
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
Selectin
g the application mode
Call up the Mode setting window
D mode
Setting for DICOM simulation (the values for colour and ACR are locked:
Colour = 7500K, ACR = off)
Office
Office presets (the settings for colour and sharpness can be adjusted)
Photo
Photo p resets (colour, sharpness, saturation, ACR)
Video
Video presets (colour, sharpness, saturation, ACR)
ACR = Dynamic contrast (on / off)
24 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Operation
Adjusting the picture size and position
Call the Image adjust setting window
Phase
Eliminate picture disturbance
With this function you fine-tune your monitor to eliminate picture disturbance.
Clock
Set synchronisation
With this function you adjust the picture width to eliminate vertical picture
disturbances.
H-Position
Adjust the horizontal position
With this function you move the picture to the left or to the right.
V-Position
Adjust the vertical position
With this function you move the picture up or down.
Sharpness
Adjust the sharpness of the picture for the Photo and Vi deo modes.
Saturation
Adjust the saturation for the Photo and Video modes.
Expansion
Adjust the picture size
Full screen = selection of full screen mode
Keep aspect = maximum picture size withou t distortion (only for PC image)
Adjusting the volume
Call the Audio setting window
Vol u m e
Set the volume for playback with the integrated loudspeakers
Mute
Switch the loudspeakers off or on
Setting colour temperature and colours
Call the Colour setting window
Select the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The
colour temperature is measured in K (= Kelvin). You can choose between
sRGB, 6500 K, 7500 K, 9300 K, Native and Custom Colour.
The options sRGB, Native and Custom colour are only available in the Office
setting mode.
In the user-defined setting you can change the colour ratios of the basic
colours (red, green, blue) as required.
Fujitsu Technology Solutions 25
Downloaded from ManualMonitor.com Manuals
Operation
Setting functions
Call up the Setup settings window
Input select
Select the input signal
This function is used to select the input signal (VGA, DVI or DP).
This is on condition that the display adapter supports this function.
Language
Set the language for the OSD menu
With this function you select the language for the OSD menu.
The default setting is English.
DDC-CI
Activates/deactivates the DDC-CI function
On = The DDC-CI function is activated (default setting)
Off = The DDC-CI function is deactivated
OSDTimeout
Set the display duration of the OSD menu
With this function you sele ct a value fro m 10 to 120 seconds.
If the set time expires without a setting being made, the OSD m enu is
automatically faded out.
Factory recall
Activate the factory settings
With this function all settings are reset to the factory settings without
prompting for confirmation.
The function is executed with the
button. If you are using a VGA data
cable, an Auto Processing message is displayed. The language selection
menu appears.
Displaying information
Call the Information setting w indow
With this function the model designation, serial number, resolution, H/V
frequency, input signal, colour setting and polarity of the synchronisation
signal are disp layed.
26 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Notes on ergonomic colour adjustmen
t
Notes on ergonomic colour adju
stment
If you select colours for the monitor in your application programmes,
take note of the information below.
The primary colours blue and red on a dark background d o not produce the minimum
required contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters and background and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Characters
Background
black white purple blue
cyan green
yellow red
black
++
-
+++
-
white
+++
---
+
purple
++
-----
blue
-
+
-
+
-
+
-
cyan
+
--
+
---
green
+
--
+
---
yellow
+
-
++
--
+
red
-
+
----
+
+ Colour combination very suitable
- Colour combination not suitable because colour hues are too close together, thin characters
are not identifiable or rigorous focusing is demanded of the human eye.
Fujitsu Technology Solutions 27
Downloaded from ManualMonitor.com Manuals
Troubleshooting
Troubleshooting
Should an error occur, first che ck the following points. If the distortion is still not eliminated,
the monitor should, if possible, be checked on another computer.
If you cannot s olve the problem, please contact our Service Desk.
Having this problem? Check the following points:
No screen display
Power indicator does not light up
► Check whether changing the 0W switch on
the rear to setting 1 cures the problem.
► Check whether the power c
able on the
monitor is connected co
rrectly.
► Check whether the computer is switched on.
No screen display
Power indicator is lit
► Check whether the computer is switched on.
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Press any key on the computer keyboard.
The computer may be in power saving
mode.
► Alter the brightness and/or contrast until you
get a picture.
Message: No Signal
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Check whether the computer is switched on.
Message:
Frequency out of range:
##kHz/##Hz
Please change the display mode
to 1920 x 1200 with 60 Hz
The input signal (horizontal frequency and
refresh rate) at the displayed input does not
correspond to the technical data for the monitor.
► Adjust the video frequency range using the
computer software (see documentation for
the computer or display adapter).
► Set a diff
erent screen resolution using the
computer
software (see documentation for
the comp
uter or display adapter).
Picture
position not correct
The monitor recognises an undefined mode (see
chapter "
Technical specification", Page 31).
► Press the
AUTO
/ button to enable
auto-adjustment of the screen.
Picture is shaking
► Check whether the data cable for the
monitor is correctly attached to the monitor
port on the computer.
► Press the
AUTO
/ button to enable
auto-adjustment of the screen.
Picture is wrongly adjusted
► Run the Factory Recall function in the O SD
menu.
Th
e Auto Processing message appears.
28 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Troubleshooting
Having this problem? Check the following points:
Picture disturbances (vertica
l lines)
► Press the
AUTO
/ button to enable
auto-adjustment of the screen.
Picture disturbances (horizontal lines, picture
noise)
► Press the
AUTO
/ button to enable
auto-adjustment of the screen
.
The screen becomes darker
The background lighting has a limited lifetime.
If your monitor display should be come too dark,
the background lighting will have to be replaced.
► Contact our Service Desk.
Fujitsu Technology Solutions 29
Downloaded from ManualMonitor.com Manuals
Explanatory information about stan
dard ISO 9241-307
Explanatory information abou
t
standard ISO 9241-307
Permanently unlit or lit pixels
Today’s production techniques cannot guarantee an absolutely fault-free screen display. Depending
on the total number of pixels (resolution), there may be a few constantly lit or unlit pixels or subpixels.
Pixel
A pixel consists of 3 subpixels, normally red, green and blue. A pixel is
the smallest element that can be generated by complete functionality of
the display.
Subpixel
A subpixel is a separately addressable internal structure within a pixel that
enhances the pixel function.
The maximum permitted number of faulty pixels is stipulated in t he international standard
ISO 9241-307. In accordance with standard ISO 9241-3, LCD monitors by Fujitsu comply with Class
II for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher.
Examples:
A flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels. Each pixel
consists of three subpixels (red, green and blue), so there are almost 3.9 million subpixels in total.
According to ISO 9241-3 (Class II), a maximum of 3 lit and 3 unlit pixels plus 7 lit or 13 unlit subpixels,
or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels).
A flat-screen monitor with a resolution of 1920 x 1200 has 1920 x 1200 = 2304000 pixels. Each pixel
consists of three subpixels (red, green and blue), so there are almost 6.9 million subpixels in total.
According to ISO 9241-3 (Class I), a maximum of 2 lit and 2 u nlit pixels plus 5 lit or 11 unlit subpixels,
or a corresponding combination, may be faulty (1 lit subpixel counts as two unlit subpixels).
30 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Technical specification
Technical specification
Condensation is not permitted, neither in the rated range of operation
nor in the limit range of operation.
P24W-6 IPS
Dimensions and weight
Visible diagonals 61 cm
Dot pitch 0,27 mm
Width 518,4 mmImage size
Height 324,0 mm
Maximum resolution 1920 x 1200
Width 563 mm
Height 397 mm
Dimensions incl. monitor base
Depth 228 mm
Weight (with
out packaging)
approx. 8.0 kg
Storable display modes
46
Pixel error classes according
to ISO 9241-307
Class
I
Electrical data
Analog
positive, 0.7 V
ss
,75Ω
Video
Digital
DVI-D /
DP with HDCP
Synchronisation Separate Sync. TTL, positive or
negative
Horizontal frequency
30 kHz .... 81 kHz
(multi-scanning)
Refresh rate
50 Hz .... 76 Hz
Maximum pixel rate
VG
A, DVI, DP: 165 MHz
Po
wer supply
Switches automatically
100 V – 240 V, 50 Hz – 60 Hz
Normal operation 78 W
ECO operating mode
47 W
Total power consumption
(excluding audio, USB)
Power-saving mode
(0 W operating mode)
0W
Sound output 1.5 W left; 1.5 W right
Environmental conditions
Environment class 3K2, DIN IEC 721
Rated range of operation
Humidity
15 °C .... 35 °C
20 % .... 85 %
Limit range of operation
Humidity
5 °C .... 35 °C
20 % .... 85 %
Fujitsu Technology Solutions 31
Downloaded from ManualMonitor.com Manuals
Technical specification
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Cha nnel) is used as the communications
interface between the monitor and the computer. If the computer is eq uipped with a
VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring
optimum operation from the monitor a nd select the appropriate settings.
Preset operating modes
The picture p osition and size have been set to optimum values at the factory for the
operating modes listed above. Depending on the display adapter used, it m ay be
necessary to adjust the display position and size. In this case, you can change and
save the settings (see chapter "
Changing the monitor se ttings", Page 19).
For ergonomic reasons, a screen resolution of 1920 x 1200 pixels is recommended.
Because of the techn ology used (active matrix), a n LCD monitor provides a
totally flicker-free picture, even with a refresh rate of 60 Hz.
Most frequent operating modes
Horizontal frequ
ency
Refresh rate Screen resolutio
n
31.5 kHz 70 Hz 720 x 400
31.5 kHz 60 Hz 640 x 480
37.5 kHz 75 Hz 640 x 480
37.9 kHz 60 Hz 800 x 600
46.9 kHz 75 Hz 800 x 600
48.4 kHz 60 Hz 1024 x 768
55.4 kHz 60 Hz 1440 x 900
60.0 kHz 75 Hz 1024 x 768
64.0 kH
z
60 Hz 1280 x 1
024
65.0 kH
z
60 Hz 1680 x 1
050
74.0 k
Hz
60 Hz 1920 x
1200
80.0
kHz
75 Hz 1280
x 1024
32 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Technical specification
SUB D port
610
1115
51
Pin Meaning
1 Video input red
2 Video input green
3 Video input blue
4
Ground
5
Ground
6 Video ground red
7
Video ground green
8 Video ground blue
9
+5 V (DDC)
10
Sync. ground
11
Ground
12
DDC Data
13 H. sync
14 V. sync
15
DDC Clock
Fujitsu Technology Solutions 33
Downloaded from ManualMonitor.com Manuals
Technical specification
DVI-D port
9
1
17
Pin Meaning
1
TMDS Data2–
2
TMDS Data2+
3
TMDS Data 2/4 Shield
4 not connected
5
not connected
6
DDC Clock
7
DDC Data
8
Analog Vertica
l Sync
9
TMDS Data1–
10
TMDS Data1+
11
TMDS Data 1/
3 Shield
12 not connec
ted
13 not connec
ted
14 +5V Power
15 Earth
16 Hot Plu
g D etect
17
TMDS Data0–
18
TMDS Data0+
19
TMDS
Data 0/5 Shield
20 not
connected
21 no
t c onnected
2
2
TMDS Clock Shield
23
TMDS Clock+
24
TMDS Clock–
34 Fujitsu Technology Solutions
Downloaded from ManualMonitor.com Manuals
Technical specification
DisplayPort socket
1319 17 15 13 11 9 7 5
2420 19 16 14 12 10 8 6
Pin Meaning
1
Lane 3 (negative)
2Earth
3
Lane 3 (positive)
4
Lane 2 (negative)
5
Earth
6
Lane 2 (positive
)
7
Lane 1 (negative)
8Earth
9
Lane 1 (positive)
10
Lane 0 (nega
tive)
11 Earth
12
Lane 0 (positive)
13
Connected to earth
14
Connect
ed to earth
15
Auxiliary c hannel (positive)
16 Earth
17
Auxiliary channel (negative)
18 Hot Plug Detect
19
Ret
urn for Power
20
Power for connector (3.3 V 500 mA)
Fujitsu Technology Solutions 35
Downloaded from ManualMonitor.com Manuals
Loading...