Fujitsu MB95100 Series, F2MC-8FX Series, MB2146-09, MB95FV100-101, MB95FV100-103 Application Note

...

Fujitsu Microelectronics Europe

Application Note

F²MC-8FX FAMILY

8-BIT MICROCONTROLLER

MCU-AN-395002-E-V10

MB95100 SERIES

EMULATOR HW SETUP

APPLICATION NOTE

MB2146-09 – Installation Guide

Revision History

Date Issue

2004-10-12 V1.0; M. Vogel

This document contains 23 pages.

MCU-AN-395002-E-V10 - 2 - © Fujitsu Microelectronics Europe GmbH

MB2146-09 – Installation Guide

Warranty and Disclaimer

To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for all products delivered free of charge (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying written materials. In addition, to the maximum extent permitted by applicable law, Fujitsu

icroelectronics Europe GmbH disclaims all warranties and liabilities for the performance of the

M Product and any consequential damages in cases of unauthorised decompiling and/or reverse engineering and/or disassembling. Note, all these products are intended and must only be used in an evaluation laboratory environment.

1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in accordance with the accompanying written materials for a period of 90 days form the date of receipt by the customer. Concerning the hardware components of the Product, Fujitsu Microelectronics Europe GmbH warrants that the Product will be free from defects in material and workmanship under use and service as specified in the accompanying written materials for a duration of 1 year from the date of receipt by the customer.

2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability and the customer´s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in original packing and without further defects resulting from the customer´s use or the transport. However, this warranty is excluded if the defect has resulted from an accident not attributable to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.

3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH disclaims all other warranties, whether expressed or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the Product is not designated.

4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s and its suppliers´ liability is restricted to intention and gross negligence.

NO LIABILITY FOR CONSEQUENTIAL DAMAGES

To the maximum extent permitted by applicable law, in no event shall Fujitsu Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever (including but without limitation, consequential and/or indirect damages for personal injury, assets of substantial value, loss of profits, interruption of business operation, loss of information, or any other monetary or pecuniary loss) arising from the use of the Product.

Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect

MB2146-09 – Installation Guide

Contents

REVISION HISTORY ................................................................................................. 2

WARRANTY AND DISCLAIMER .............................................................................. 3

CONTENTS ............................................................................................................... 4

1 INTRODUCTION ................................................................................................... 5

2 HARDWARE REQUIREMENTS............................................................................ 6

2.1 Devices.......................................................................................................... 6

3 SETTING UP THE EMULATION SYSTEM ........................................................... 7

3.1 System Configuration .................................................................................... 7

3.2 BGM Adapter................................................................................................. 8

3.2.1 Connection to the Host Machine ................................................... 8

3.2.2 Connection to the User System..................................................... 8

3.2.3 Adapter Interface Specifications ................................................... 9

3.2.4 Tool Reset Specifications .............................................................. 9

3.3 MCU Board.................................................................................................. 10

3.3.1 Connecting the MCU board to the Evaluation board ................. 10

3.3.2 Jumper settings and switches on MCU board ........................... 11

3.3.3 How to mount oscillator on MCU board...................................... 12

3.4 Evaluation board.......................................................................................... 13

3.4.1 Jumper settings on Evaluation board ......................................... 13

4 SETTING UP THE EMULATION SOFTWARE.................................................... 14

4.1 Download Monitor Program......................................................................... 14

4.2 Making Setup File by Setup Wizard for Emulator ........................................ 14

4.2.1 Procedure for Setting Setup File by Setup Wizard .................... 14

4.2.2 Optimization of response speed during debugging .................. 19

4.3 Executing Program...................................................................................... 20

4.3.1 Run Program ................................................................................. 20

4.3.2 Setting Breakpoints ...................................................................... 21

4.3.3 Types of breakpoints and how to set.......................................... 22

4.3.4 Trace Windows.............................................................................. 22

4.3.5 Display format for trace data ....................................................... 23

4.3.6 Saving setup file for the Emulator............................................... 23

MCU-AN-395002-E-V10 - 4 - © Fujitsu Microelectronics Europe GmbH

MB2146-09 – Installation Guide

Chapter 1 Introduction

1 Introduction

This installation guide will help you setting up the MB2146-09 BGM ADAPTER with the MB2146-301 or MB2146-303 MCU Board for Fujitsu 8FX-microcontroller and its usage with 8bit-Softune Workbench V30L29 or higher.

MB2146-09 – Installation Guide

Chapter 2 Hardware Requirements

2 Hardware Requirements

DEBUGGING TOOLS

2.1 Devices

This section describes the procedure for actual machine verification using the emulator. The equipment used for explanation of the emulator is listed below:

• MB2146-09 : BGM Adapter

• MB2146-301 : MCU board with MB95V100-101 (3V version)

• MB2146-303 : MCU board with MB95V100-103 (5V version)

• MB95FV100-101 : 3V evaluation chip

• MB95FV100-103 : 5V evaluation chip

• MB2146-401 : Evaluation board

• Crystal oscillator : 4 MHz

• Power supply for MB2146-401 : 5 VDC

• USB(A-B) cable : USB V1.1

Warning:

Do only supply 5 volts DC to MB2146-401 evaluation board. Power supply is directly connected to MCU board if jumper settings (JP3 & JP4) on evaluation board are set to 5V. Higher voltage may damage MCU board, Evaluation board and BGM adapter!

MB2146-09 – Installation Guide

valuation board

Chapter 3 Setting up the Emulation System

3 Setting up the Emulation System

HARDWARE INSTALLATION

3.1 System Configuration

Connect the adapter between the host machine and the user system so that the adapter can serve as an emulator under control of the host machine.

Figure 1: System Configuration

Figure 2: Configuration overview

+ 16 hidden pages

Fujitsu MB95100 Series, F2MC-8FX Series, MB2146-09, MB95FV100-101, MB95FV100-103 Application Note

Specifications and Main Features

Frequently Asked Questions

User Manual