Fujitsu MB91360 SERIES, STARTERKITMB91360-ADA120 User Manual

Fujitsu Microelectronics Europe
User Guide
STARTERKIT ADAPTER
STARTERKITMB91360-ADA120
FMEMCU- UG-910002-15
MB91360 SERIES
STARTERKITMB91360-ADA120

Revision History

Revision History
Date Issue
02.07.01 Ver. 1.0 First draft
10.07.01 Version 1.1 File compression settings changed
17.07.01 Version 1.2 Corrections
31.10.02 Version 1.3, MST New format, MB91F365G/F366G series added
22/01/2003 Version 1.4
Typos corrected
06/02/2003 Version 1.5, MST
Typos corrected
This document contains 17 pages.
UG-910002-15 - 2 - © Fujitsu Microelectronics Europe GmbH
STARTERKITMB91360-ADA120

Warranty and Disclaimer

Warranty and Disclaimer
To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for STARTERKITMB91360-ADA120 and all its deliverables (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying written materials. In addition, to the maximum extent permitted by applicable law,
ujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of
F the Product and any consequential damages in cases of unauthorised decompiling and/or reverse engineering and/or disassembling. Note, the STARTERKITMB91360-ADA120 and all its deliverables are intended and must only be used in an evaluation laboratory environment.
1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in
accordance with the accompanying written materials for a period of 90 days form the date of receipt by the customer. Concerning the hardware components of the Product, Fujitsu Microelectronics Europe GmbH warrants that the Product will be free from defects in material and workmanship under use and service as specified in the accompanying written materials for a duration of 1 year from the date of receipt by the customer.
2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability
and the customer´s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in original packing and without further defects resulting from the customer´s use or the transport. However, this warranty is excluded if the defect has resulted from an accident not attributable to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.
3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH
disclaims all other warranties, whether expressed or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the Product is not designated.
4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s
and its suppliers´ liability is restricted to intention and gross negligence.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES
To the maximum extent permitted by applicable law, in no event shall Fujitsu Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever (including but without limitation, consequential and/or indirect damages for personal injury, assets of substantial value, loss of profits, interruption of business operation, loss of information, or any other monetary or pecuniary loss) arising from the use of the Product.
Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect
© Fujitsu Microelectronics Europe GmbH - 3 - UG-910002-15
STARTERKITMB91360-ADA120

Contents

Contents
REVISION HISTORY............................................................................................................ 2
WARRANTY AND DISCLAIMER ......................................................................................... 3
CONTENTS .......................................................................................................................... 4
0 INTRODUCTION.............................................................................................................. 5
1 INTERFACING THE MB91360 STARTER KIT TO THE STARTERKITMB91360-ADA120
AND PROBE CABLE....................................................................................................... 6
2 APPENDIX....................................................................................................................... 8
2.1 Pin comparision....................................................................................................... 8
2.2 Figures.................................................................................................................. 15
3 RELATED PRODUCTS ................................................................................................. 16
4 INFORMATION IN THE WWW....................................................................................... 17
UG-910002-15 - 4 - © Fujitsu Microelectronics Europe GmbH
STARTERKITMB91360-ADA120

Introduction

0 Introduction
The Starterkit91360 is the Evaluation board for MB91360G series.
It is equipped with MB91F362G series (208-pin).
When using a 120-pin derivate (MB91F365G/F366G/F367G/F368G) the adapter board STARTERKITMB91360-ADA120 is mapping the pins to the functions on the Starterkit91360.
© Fujitsu Microelectronics Europe GmbH - 5 - UG-910002-15
STARTERKITMB91360-ADA120
Chapter 1 Interfacing the MB91360 Starter Kit to the STARTERKITMB91360-ADA120 and probe Cable
1 Interfacing the MB91360 Starter Kit to the
STARTERKITMB91360-ADA120 and probe Cable
The MB91F367/8 is a 120-pin derivative of the MB91360 family processors. The MB91F367/8 is packaged in the FTP-120P-M21.
In order to allow users to develop applications on the MB91360 Starter Kit, an adaptor board and Probe Cable have been developed.
The Adapter Board (STARTERKITMB91360-ADA120), which converts the MB91F362 in out to the MB91F365/6/7/8 pin out, can be fitted to the Starter Kit with the use of Pin Headers. For the Adapter board to be fitted correctly, the MB91F362 MCU and socket cap must be removed from the Starter kit.
The Adapter Board is fitted with an NQPACK120SD enabling the user to fit either an MCU or the Probe Cable. Jumpers J1 and J2 enable switching between sub clock and D/A Converter on pins 27 and 28 – please see circuit diagram for details.
Jumper MB91F365G
MB91F367G
JP1 1-2 2-3
JP2 1-2 2-3
Note: Default Jumper Setting: MB91F368G JP1, JP2 = 2-3
The Probe cable interfaces between the Emulator MB2197-01 and the NQPACK120SD. Please note the direction of the probe cable when fitted onto the Starter Kit. The probe cable is offset by 90° compared to the MB91FV360G.
Also included is a pin cross-reference between the MB91FV360, MB91F365/6 and MB91F367/8.
The following diagram shows the starter kit assembled with the STARTERKITMB91360­ADA120 Adapter board and probe cable.
MB91F366G
MB91F368G
UG-910002-15 - 6 - © Fujitsu Microelectronics Europe GmbH
Loading...
+ 11 hidden pages