Page 1
Fujitsu Microelectronics Europe
User Guide
STARTERKIT ADAPTER
STARTERKITMB91360-ADA160
FMEMCU- UG-910004-14
MB91360 SERIES
USER GUIDE
Page 2
STARTERKITMB91360-ADA160
Revision History
Revision History
Date Issue
22/01/2003 Ver. 1.0
Initial version
06/02/2003 Ver. 1.1
Typos corrected
02/03/2007 Ver. 1.2 Recycling Note added
05/09/2008 Ver. 1.3 China-RoHS regulation added
09/01/2009 Ver. 1.4,
This document contains 18 pages.
Information WWW updated
UG-910004-14 - 2 - © Fujitsu Microelectronics Europe GmbH
Page 3
STARTERKITMB91360-ADA160
Warranty and Disclaimer
Warranty and Disclaimer
To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts
its warranties and its liability for STARTERKITMB91360-ADA160 and all its deliverables (eg.
software include or header files, application examples, target boards, evaluation boards, engineering
samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in
accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under
which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all
accompanying written materials. In addition, to the maximum extent permitted by applicable law,
Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of
the Product and any consequential damages in cases of unauthorised decompiling and/or reverse
engineering and/or disassembling. Note, the STARTERKITMB91360-ADA160 and all its
deliverables are intended and must only be used in an evaluation laboratory environment.
1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in
accordance with the accompanying written materials for a period of 90 days form the date of
receipt by the customer. Concerning the hardware components of the Product, Fujitsu
Microelectronics Europe GmbH warrants that the Product will be free from defects in material
and workmanship under use and service as specified in the accompanying written materials
for a duration of 1 year from the date of receipt by the customer.
2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability
and the customer´s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s
sole discretion, either return of the purchase price and the license fee, or replacement of the
Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in
original packing and without further defects resulting from the customer´s use or the transport.
However, this warranty is excluded if the defect has resulted from an accident not attributable
to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the
customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.
3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH
disclaims all other warranties, whether expressed or implied, in particular, but not limited to,
warranties of merchantability and fitness for a particular purpose for which the Product is not
designated.
4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s
and its suppliers´ liability is restricted to intention and gross negligence.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES
To the maximum extent permitted by applicable law, in no event shall Fujitsu
Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever
(including but without limitation, consequential and/or indirect damages for personal
injury, assets of substantial value, loss of profits, interruption of business operation,
loss of information, or any other monetary or pecuniary loss) arising from the use of
the Product.
Should one of the above stipulations be or become invalid and/or unenforceable, the remaining
stipulations shall stay in full effect
© Fujitsu Microelectronics Europe GmbH - 3 - UG-910004-14
Page 4
Contents
STARTERKITMB91360-ADA160
Contents
REVISION HISTORY............................................................................................................ 2
WARRANTY AND DISCLAIMER .........................................................................................3
CONTENTS.......................................................................................................................... 4
0 INTRODUCTION.............................................................................................................. 5
1 INTERFACING THE MB91360 STARTER KIT TO THE STARTERKITMB91360-ADA160
AND PROBE CABLE.......................................................................................................6
2 APPENDIX....................................................................................................................... 7
2.1 Pin comparision....................................................................................................... 7
2.2 Figures..................................................................................................................13
3 RELATED PRODUCTS ................................................................................................. 14
4 INFORMATION IN THE WWW....................................................................................... 15
5 CHINA-ROHS REGULATION........................................................................................ 16
6 RECYCLING.................................................................................................................. 18
UG-910004-14 - 4 - © Fujitsu Microelectronics Europe GmbH
Page 5
STARTERKITMB91360-ADA160
Introduction
0 Introduction
The Starterkit91360 is the Evaluation board for MB91360 series.
It is equipped with MB91F362G series (208-pin).
When using a 160-pin derivate (MB91F369G) the adapter board STARTERKITMB91360-
ADA160 is mapping the pins to the functions on the Starterkit91360.
© Fujitsu Microelectronics Europe GmbH - 5 - UG-910004-14
Page 6
Chapter 1 Interfacing the MB91360 Starter Kit to the STARTERKITMB91360-ADA160 and probe Cable
STARTERKITMB91360-ADA160
1 Interfacing the MB91360 Starter Kit to the
STARTERKITMB91360-ADA160 and probe Cable
The MB91F369 is a 160-pin derivative of the MB91360 family processors. The MB91F369 is
packaged in the FTP-160P-M15.
In order to allow users to develop applications on the MB91360 Starter Kit, an adaptor board
and Probe Cable have been developed.
The Adapter Board (STARTERKITMB91360-ADA160), which converts the MB91F362G pin
out to the MB91F369G pin out, can be fitted to the Starter Kit with the use of Pin Headers.
For the Adapter board to be fitted correctly, the MB91F362G MCU and socket cap must be
removed from the Starter kit.
The Adapter Board is fitted with an NQPACK160SD enabling the user to fit either an MCU or
the Probe Cable.
The Probe cable interfaces between the Emulator MB2197-01 and the NQPACK160SD.
Please note the direction of the probe cable when fitted onto the Starter Kit.
Also included is a pin cross-reference between the MB91FV360G and MB91F369G.
The following diagram shows the starter kit assembled with the STARTERKITMB91360ADA160 Adapter board and probe cable.
Figure 1 Diagram showing how to connect the STARTERKITMB91360-ADA160
Adapter board and Probe Cable to the MB91360 Starter Kit
UG-910004-14 - 6 - © Fujitsu Microelectronics Europe GmbH
Page 7
2 Appendix
2.1 Pin comparision
STARTERKITMB91360-ADA160
Chapter 2 Appendix
Port Function
Pin Function
AS P90 43 29 JP25
ALE P91 44 30 JP25
AH/BOOT P93 46 31 SW1
CS0X P94 47 32 JP25
CS1X P95 48 33 JP25
CS2X P96 49 34 JP25
CS3X P97 50 35 JP25
DREQ PB0 61 36 JP25
DACK0 PB1 62 37 JP25
DEOP0 PB2 63 38 JP25
AN8 PG0 53 52 LCD
AN9 PG1 54 53 LCD
AN10 PG2 55 LCD
AN11 PG3 56 LCD
AN12 PG4 57 LCD
(Where
specified)
MB91F362G
Pin Number
MB90F369G
Pin Number
MB91360 Starter Kit
Pin
AN13 PG5 58 LCD
AN14 PG6 59 LCD
AN15 PG7 60 LCD
AN0 PH0 66 44 JP16
AN1 PH1 67 45 JP16
AN2 PH2 68 46 JP16
AN3 PH3 69 47 JP16
AN4 PH4 70 48 JP16
AN5 PH5 71 49 JP16
AN6 PH6 72 50 JP16
AN7 PH7 73 51 JP16
ATGX PI3 80 57 JP16
LED0 PJ0 84 LED
LED1 PJ1 85 LED
LED2 PJ2 86 LED
© Fujitsu Microelectronics Europe GmbH - 7 - UG-910004-14
Page 8
STARTERKITMB91360-ADA160
Chapter 2 Appendix
Pin Function
Port Function
(Where
specified)
MB91F362G
Pin Number
MB90F369G
Pin Number
MB91360 Starter Kit
LED3 PJ3 87 LED
LED4 PJ4 88 LED
LED5 PJ5 89 LED
LED6 PJ6 90 LED
LED7 PJ7 91 LED
INT0 PK0 94 68 JP20
INT1 PK1 95 69 JP20
INT2 PK2 96 70 JP20
INT3 PK3 97 71 JP20
INT4 PK4 98 72 JP20
INT5 PK5 99 73 JP20
INT6 PK6 100 74 JP20
INT7 PK7 101 75 JP20
IN0 PL0 102 JP20
IN1 PL1 103 JP20
Pin
IN2 PL2 104 JP20
IN3 PL3 105 JP20
OUT0 PL4 106 JP20
OUT1 PL5 107 JP20
OUT2 PL6 108 JP20
OUT3 PL7 109 JP20
SGO PM0 126 76 JP16
SGA PM1 127 77 JP16
SDA PM2 128 78 JP20
SCL PM3 129 79 JP20
SOT4 PN0 130 80 JP14
SIN4 PN1 131 81 JP14
SCK4 PN2 132 82 JP14
SIN3 PN3 133 83 JP14
SOT3 PN4 134 84 JP14
SCK3 PN5 135 85 JP14
OCPA0 PO0 136 101 JP15
OCPA1 PO1 137 102 JP15
OCPA2 PO2 138 103 JP15
OCPA3 PO3 139 104 JP15
UG-910004-14 - 8 - © Fujitsu Microelectronics Europe GmbH
Page 9
STARTERKITMB91360-ADA160
Chapter 2 Appendix
Pin Function
Port Function
(Where
specified)
MB91F362G
Pin Number
MB90F369G
Pin Number
MB91360 Starter Kit
OCPA4 PO4 143 JP15
OCPA5 PO5 141 JP15
OCPA6 PO6 142 JP15
OCPA7 PO7 143 JP15
TX0 PP0 146 93 JP14
RX0 PP1 147 94 JP14
TX1 PP2 148 95 JP14
RX1 PP3 149 96 JP14
TX2 PP4 150 JP14
RX2 PP5 151 JP14
SIN0 PQ0 152 97 JP14
SOT0 PQ1 153 98 JP14
SIN1 PQ2 154 JP14
SOT1 PQ3 155 JP14
SIN2 PQ4 156 JP14
Pin
SOT2 PQ5 157 JP14
PWM1P0 PR0 162 JP15
PWM1M0 PR1 163 JP15
PWM2P0 PR2 164 JP15
PWM2M0 PR3 165 JP15
PWM1P1 PR4 167 JP15
PWM1M1 PR5 168 JP15
PWM2P1 PR6 169 JP15
PWM2M1 PR7 170 JP15
PWM1P2 PS0 172 JP15
PWM1M2 PS1 173 JP15
PWM2P2 PS2 174 JP15
PWM2M2 PS3 175 JP15
PWM1P3 PS4 177 JP15
PWM1M3 PS5 178 JP15
PWM2P3 PS6 179 JP15
PWM2M3 PS7 180 JP15
VDD 25 56
VSS 26 11
VDD 51 66
© Fujitsu Microelectronics Europe GmbH - 9 - UG-910004-14
Page 10
STARTERKITMB91360-ADA160
Chapter 2 Appendix
Pin Function
Port Function
(Where
specified)
MB91F362G
Pin Number
MB90F369G
Pin Number
MB91360 Starter Kit
VSS 52 22
VDD 79 99
VSS 78 39
AVRH 65 41
AVCC 64 42
AVSS 74 43 JP16
DA0 (MB91F365GA)
X0A (MB91F366G)
DA1 (MB91F365GA)
X1A (MB91F366G)
75 JP16
121
76 JP16
122
ALARM 77 54
VSS 93 55
TESTX 81 63
CPUTESTX 82 64
VDD 92 109
Pin
X0 119 106
X1 120 107
VSS 110 67
MONCLK 116 110
VDD 144
VCC3/C 159 91
VSS 123 86
VDD 160
MD0 111 58 SW1
MD1 112 59 SW1
MD2 113 60 SW1
INITX 115 62 JP25
VDD 182
VSS 145 92
VSS 158 100
VDD 108
VSS 108
VDD
HVSS 171
HVDD 166
UG-910004-14 - 10 - © Fujitsu Microelectronics Europe GmbH
Page 11
STARTERKITMB91360-ADA160
Chapter 2 Appendix
Pin Function
Port Function
(Where
specified)
MB91F362G
Pin Number
MB90F369G
Pin Number
MB91360 Starter Kit
HVSS 161
HVDD 176
HVSS 181
VDD
A0 9 157 JP25
A1 10 158 JP25
A10 19 7 JP25
A11 20 8 JP25
A12 21 12 JP25
A13 22 13 JP25
A14 23 14 JP25
A15 24 15 JP25
A16 27 16 JP25
A17 28 17 JP25
A18 29 18 JP25
Pin
A19 30 19 JP25
A2 11 159 JP25
A20 31 20 JP25
A3 12 160 JP25
A4 13 1 JP25
A5 14 2 JP25
A6 15 3 JP25
A7 16 4 JP25
A8 17 5 JP25
A9 18 6 JP25
BGRNTX 36 27 JP25
BRQ 37 28 JP25
CLK 45 10 JP25
CP0 124
CS4X 32 23 JP25
CS5X 33 24 JP25
CS6X 34 25 JP25
D0 183 121 JP24
D1 184 122 JP24
D10 193 131 JP24
© Fujitsu Microelectronics Europe GmbH - 11 - UG-910004-14
Page 12
STARTERKITMB91360-ADA160
Chapter 2 Appendix
Pin Function
Port Function
(Where
specified)
MB91F362G
Pin Number
MB90F369G
Pin Number
MB91360 Starter Kit
D11 194 132 JP24
D12 195 133 JP24
D13 196 134 JP24
D14 107 135 JP24
D15 200 136 JP24
D16 201 139 JP24
D17 202 140 JP24
D18 203 141 JP24
D19 204 142 JP24
D2 185 123 JP24
D20 205 143 JP24
D21 206 144 JP24
D22 207 145 JP24
D23 208 146 JP24
D24 1 147 JP24
Pin
D25 2 148 JP24
D26 3 149 JP24
D27 4 150 JP24
D28 5 151 JP24
D29 6 152 JP24
D3 186 124 JP24
D30 7 153 JP24
D31 8 154 JP24
D4 187 125 JP24
D5 188 126 JP24
D6 189 127 JP24
D7 190 128 JP24
D8 191 129 JP24
D9 192 130 JP24
HSTX 114 61
LTESTX 83 65
RDX 38 26 JP25
RDY 35 118 JP25
SELCLK 117
VCI 125
UG-910004-14 - 12 - © Fujitsu Microelectronics Europe GmbH
Page 13
STARTERKITMB91360-ADA160
Chapter 2 Appendix
Port Function
Pin Function
VDD35 9
VDD35 21
VDD35 40
VDD35 112
VDD35 119
VDD35 137
VDD35 155
VDDI 87
VDDI 88
VDDI 89
VDDI 90
VDDX 118 105
VSS 199 156
VSS 111
VSS 113
(Where
specified)
MB91F362G
Pin Number
MB90F369G
Pin Number
MB91360 Starter Kit
Pin
VSS 120
VSS 138
WR0X 39 117 JP25
WR1X 43 116 JP25
WR2X 41 115 JP25
WR3X 42 114 JP25
Figure 2: Table comparing Pin and functions for the MB91FV360 series, MB91F362G
and MB91F369G
NOTE:
N.C. : Not connected
2.2 Figures
Figure 1 Diagram showing how to connect the STARTERKITMB91360-ADA160 Adapter
board and Probe Cable to the MB91360 Starter Kit..................................................6
Figure 2: Table comparing Pin and functions for the MB91FV360 series, MB91F362G
and MB91F369G....................................................................................................13
© Fujitsu Microelectronics Europe GmbH - 13 - UG-910004-14
Page 14
STARTERKITMB91360-ADA160
Chapter 3 Related Products
3 Related Products
< Starterkit91360 Evaluation board for MB91360 series
< MB2197-01 Emulator debugger main unit
< MB2197-10 DSU Probe Cable
< MB2197-120 Adapter board for MB91FV360G Evaluation device
< MB2197-127 Probe cable for 208-pin socket (MB91F362G)
< FR360-PROBE-120 Probe Cable for 120 pin devices
(MB91F365G/366G/367G/368G/376G)
< FR360-PROBE-160 Probe Cable for 160 pin devices (MB91F369G)
< NQPACK160SB Socket for package FPT-160P-M15
(Tokyo Eletech Corp. www.tetc.co.jp/e_tet.htm)
< HQPACK160SB Header for NQPACK160SB
UG-910004-14 - 14 - © Fujitsu Microelectronics Europe GmbH
Page 15
STARTERKITMB91360-ADA160
Chapter 4 Information in the WWW
4 Information in the WWW
Information about FUJITSU MICROELECTRONICS Products
can be found on the following Internet pages:
Microcontrollers (8-, 16- and 32bit), Graphics Controllers
Datasheets and Hardware Manuals, Support Tools (Hard- and Software)
http://www.fme.gsdc.de/gsdc.htm
Memory products: Flash, SDRAM and FRAM
http://www.fme.fujitsu.com/products/memory/index1.html
Linear Products: Power Management, A/D and D/A Converters
http://www.fme.fujitsu.com/products/linear/start.html
Media Products: SAW filters, acoustic resonators and VCOs
http://www.fme.fujitsu.com/products/media/index1.html
For more information about FUJITSU MICROELECTRONICS
http://www.fme.fujitsu.com/products/start.html
© Fujitsu Microelectronics Europe GmbH - 15 - UG-910004-14
Page 16
STARTERKITMB91360-ADA160
Chapter 5 China-RoHS regulation
5 China-RoHS regulation
Evaluation Board
Emulation Board
根据SJ/T11364-2006
《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信息。
The following product pollution control information is provided according to SJ/T11364-2006
Marking for Control of Pollution caused by Electronic Information Products.
1．电子信息产品污染控制标志说明 Explanation of Pollution Control Label
评估板
仿真板
该标志表明本产品含有超过中国标准SJ/T11363-2006
《电子信息产品中有毒有害物质的限量要求》中限量的有毒有害物质。标志中的数字为本产品
的环保使用期，表明本产品在正常使用的条件下，有毒有害物质不会发生外泄或突变，用户使
用本产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限，单位为年。
为保证所申明的环保使用期限，应按产品手册中所规定的环境条件和方法进行正常使用，并严
格遵守产品维修手册中规定的定期维修和保养要求。
产品中的消耗件和某些零部件可能有其单独的环保使用期限标志，并且其环保使用期限有可能
比整个产品本身的环保使用期限短。应到期按产品维修程序更换那些消耗件和零部件，以保证
所申明的整个产品的环保使用期限。
本产品在使用寿命结束时不可作为普通生活垃圾处理，应被单独收集妥善处理。
请注意：环保使用期限50年的指定不是与产品的耐久力，使用期限或任何担保要求等同的。
This symbol to be added to all EIO sold to China, indicates the product contains hazardous
materials in excess of the limits established by the Chinese standard SJ/T11363-2006
Requirements for Concentration Limits for Certain Hazardous Substances in Electronic
Information Products. The number in the symbol is the Environment-friendly Use Period
(EFUP), which indicates the period, starting from the manufacturing date, during which the
toxic or hazardous substances or elements contained in electronic information products will
not leak or mutate under normal operating conditions so that the use of such electronic
information products will not result in any severe environmental pollution, any bodily injury or
damage to any assets, the unit of the period is “Year”.
UG-910004-14 - 16 - © Fujitsu Microelectronics Europe GmbH
Page 17
STARTERKITMB91360-ADA160
Chapter 5 China-RoHS regulation
In order to maintain the declared EFUP, the product shall be operated normally according to
the instructions and environmental conditions as defined in the product manual, and periodic
maintenance schedules specified in Product Maintenance Procedures shall be followed
strictly.
Consumables or certain parts may have their own label with an EFUP value less than the
product. Periodic replacement of those consumables or parts to maintain the declared EFUP
shall be done in accordance with the Product Maintenance Procedures.
This product must not be disposed of as unsorted municipal waste, and must be collected
separately and handled properly after decommissioning.
Please note: The designation of 10 years EFUP is not to be equated with the durability, useduration or any warranty-claims of the product.
产品中有毒有害物质或元素的名称及含量
产品中有毒有害物质或元素的名称及含量
产品中有毒有害物质或元素的名称及含量产品中有毒有害物质或元素的名称及含量
Table of hazardous substances name and concentration
部件
名称
Component Name
有毒有害物质
Hazardous substances name
或元素
Starterkitmb91360-ada160
铅
(Pb)
x o o o o o
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
O: 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下
X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006 标准规定的限量要求
• 此表所列数据为发布时所能获得的最佳信息
•
由于缺少经济上或技术上合理可行的替代物质或方案，此医疗设备运用以上一些有毒有害物质来实现设备的预期
临床功能，或给人员或环境提供更好的保护效果
。
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.
• Data listed in the table represents best information available at the time of publication
© Fujitsu Microelectronics Europe GmbH - 17 - UG-910004-14
Page 18
STARTERKITMB91360-ADA160
Chapter 6 Recycling
6 Recycling
Gültig für EU-Länder:
Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische
Gesetze nehmen wir dieses Gerät wieder zurück.
Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse:
Fujitsu Microelectronics Europe GmbH
Warehouse/Disposal
Monzastraße 4a
63225 Langen
Valid for European Union Countries:
According to the European WEEE-Directive and its implementation into national laws we
take this device back.
For disposal please send the device to the following address:
Fujitsu Microelectronics Europe GmbH
Warehouse/Disposal
Monzastraße 4a
63225 Langen
UG-910004-14 - 18 - © Fujitsu Microelectronics Europe GmbH
Loading...