Fujitsu M3093EX, M3093GX, M3093DE: M3093DG, ScanPartner 93GX Cleaning Instructions Manual

M3093EX/GX/DE/DG anD ScanPartnEr 93GX conSuMablE rEPlacEMEnt anD clEaninG inStructionS

M3093EX/GX/DE/DG and ScanPartner 93GX

Consumable Replacement and Cleaning Instructions

cG00000-676501rEviSion b

M3093EX/GX/DE/DG anD ScanPartnEr 93GX conSuMablE rEPlacEMEnt anD clEaninG inStructionS

Kit Contents

Pick Roller Qty 2

F1 Cleaner

Isopropyl Alcohol

Qty 1

Lint Free

Cleaning Cloths

Qty 2 20/pack

Pad Assembly Qty 3

Q-Tips

Qty 1 100/pack

Cleaning Paper

Qty 1 10/pack

Note: Kit Contents may Vary

M3093EX/GX/DE/DG anD ScanPartnEr 93GX conSuMablE rEPlacEMEnt anD clEaninG inStructionS

Consumables list

m3093eX/GX/De/DG anD sCanPartner 93GX Consumables

Description Qty. Life Fujitsu P/N

Pad Assembly 1 100,000 PA02201-0020

Pick Roller 1 200,000 PA02212-K001

Pad Assembly

Pick Roller

Note:
NCR or Carbonless paper has chemical composition which damages
the Pad the Pick Roller. Cleaning of these items will be needed more
frequently to avoid feed problems. Also their life will be reduced if
this paper is scanned.

M3093EX/GX/DE/DG anD ScanPartnEr 93GX conSuMablE rEPlacEMEnt anD clEaninG inStructionS

rePlaCinG the PaD assembly

Multiple feeds can be caused by a worn out Pad Assembly. The life span
of the Pad Assembly is about 100,000 sheets or 1 year if maintained
properly. If NCR or carbonless paper is used the life span may be
decreased by half.

Pick

Spring

Worn Pad

Retainer

Pick

Spring

New Pad

Side Views of New and Worn Pads

Retainer

• Lift the ADF Lever and open the ADF.

ADF Lever

ADF

• Make sure the Paper Select Lever is set to “N” before removing the
Pad Assembly.

Paper Thickness

Adjustment

• Hold the Pad Assembly at
points A & B, or insert a coin

or a at head screwdriver

into the slot in the Pad
Assembly.

• Slide the Pad Assembly to

Thick

Paper

A

Normal

Paper

ADF

Frame

Slot

B